Self-Assembled Monolayers of N-Heterocyclic Olefins on Au(111)

Enlarging moment and regulating orientation of buried interfacial dipole for efficient inverted perovskite solar cells

Carrier transport and recombination at the buried interface of perovskite have seriously restricted the further development of inverted perovskite solar cells (PSCs). Herein, an interfacial dipolar chemical bridge strategy to address this issue is presented. 2-(Diphenylphosphino) acetic acid (2DPAA) is selected as the linker to reconstruct the interfacial dipole, which effectively enlarges the interfacial dipole moment to 5.10 D and optimizes to a positive dipole orientation, thereby accelerating vertical hole transport, suppressing nonradiative recombination and promoting the perovskite crystallization. The champion inverted device yields a high power conversion efficiency (PCE) of 26.53% (certified 26.02%). Moreover, this strategy is extended to the wide-bandgap perovskite and large-area devices, which delivers high PCEs of 22.02% and 24.11%, respectively. The optimized devices without encapsulation also demonstrate great long-term shelf and operational stability. Our work highlights the importance of interfacial dipole moment and orientation at the buried interface to realize efficient and stable inverted PSCs.

Strong Substrate-Adsorbate Interactions Direct the Impact of Fluorinated N-Heterocyclic Carbene Monolayers on Au Surface Properties

Fluorinated self-assembled monolayers (SAMs) have been utilized in a variety of applications such as transistors and optoelectronic devices. However, in most SAMs the fluorinated groups could not be positioned in high proximity to the surface due to steric effects. This limitation hinders the direct analysis of the impact of the fluorination level on surface properties. Herein, fluorinated aromatic N-heterocyclic carbenes (NHCs), with 1-5 fluorine atoms, were self-assembled on a gold substrate. These NHCs enabled the positioning of fluorinated groups in high proximity to the metal surface to identify the influence of the fluorination level on surface properties. Experimental measurements and theoretical calculations identified that all fluorinated NHCs formed SAMs and adopted a flat-lying adsorption configuration while anchored to the metal surface via Au adatom. A higher fluorination level induced a stronger interaction of the fluorinated side groups with the Au surface. The stronger interaction and surface proximity of the fluorinated side groups deteriorated the overall binding energy of the NHC due to the less-optimized adsorption geometry of the carbene carbon. Ultraviolet photoelectron spectroscopy measurements revealed that fluorinated NHC monolayers lowered the surface work function by up to 1 eV and induced an increase of 15-20° in the water contact angle. The impact on surface properties did not vary according to the fluorination level of NHCs, and similar values were measured for NHC with 1-5 fluorine atoms. It is therefore identified that dominant adsorbate-substrate interactions between the fluorinated side groups and the Au surface quenched the distinct impact of the fluorination level on surface functionality.

Energetics and Redox Kinetics of Pure Ferrocene-Terminated N-Heterocyclic Carbene Self-Assembled Monolayers on Gold

N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on gold have received considerable attention, but little is known about the lateral interactions between neighboring NHC molecules, their stability when subjected to aggressive oxidizing/reducing conditions, and their interactions with solution ions, all of which are essential for their use in a wide range of applications. To address these deficiencies, we present a comprehensive investigation of two different ferrocene (Fc)-terminated NHC SAMs with different chain lengths and linking groups. Pure monolayers of Fc-terminated NHCs display only a single, symmetrical pair of redox peaks, implying the formation of a homogeneous SAM structure with uniformly distributed Fc/Fc+ redox centers. By comparison, pure Fc-alkylthiol SAMs exhibit complex and impractical redox chemistry and require surface dilution in order to achieve reproducible properties. The NHC SAMs examined in this study exhibit very fast Fc redox kinetics and comparable or even superior stability against the application of multiple potential cycles or long-time holding at constant potential compared to alkylthiol SAMs. Furthermore, ion pairing of Fc+ and hydrophobic perchlorate and other hydrophilic anions is observed with Fc-NHC SAMs, highlighting conditions favorable for future applications of these monolayers. This study should therefore shed light on the very promising characteristics of redox-active NHC SAMs as an alternative to traditional Fc-alkylthiol SAMs for multiple practical applications, including in sensors and electrocatalysis.

Ultrastable 3D Heterogeneous Integration via N-Heterocyclic Carbene Self-Assembled Nanolayers

The commercialization of 3D heterogeneous integration through hybrid bonding has accelerated, and accordingly, Cu-polymer bonding has gained significant attention as a means of overcoming the limitations of conventional Cu-SiO2 hybrid bonding, offering high compatibility with other fabrication processes. Polymers offer robust bonding strength and a low dielectric constant, enabling high-speed signal transmission with high reliability, but suffer from low thermomechanical stability. Thermomechanical stability of polymers was not achieved previously because of thermal degradation and unstable anchoring. To overcome these limitations, wafer-scale Cu-polymer bonding via N-heterocyclic carbene (NHC) nanolayers was presented for 3D heterogeneous integration, affording ultrastable packing density, crystallinity, and thermal properties. NHC nanolayers were deposited on copper electrodes via electrochemical deposition, and wafer-scale 3D heterogeneous integration was achieved by adhesive bonding at 170 °C for 1 min. Ultrastable conductivity and thermomechanical properties were observed by the spatial mapping of conductivity, work function, and force-distance curves. With regard to the characterization of NHC nanolayers, low-temperature bonding, robust corrosion inhibition, enhanced electrical conductivity, back-end-of-line process compatibility, and fabrication process reduction, NHC Cu/polymer bonding provides versatile advances in 3D heterogeneous integration, indicating that NHC Cu/polymer bonding can be utilized as a platform for future 3D vertical chip architectures.

The Electron-Rich and Nucleophilic N-Heterocyclic Imines on Metal Surfaces: Binding Modes and Interfacial Charge Transfer

The strongly electron-donating N-heterocyclic imines (NHIs) have been employed as excellent surface anchors for the thermodynamic stabilization of electron-deficient species due to their enhanced nucleophilicity. However, the binding mode and interfacial property of these new ligands are still unclear, representing a bottleneck for advanced applications in surface functionalization and catalysis. Here, NHIs with different side groups have been rationally designed, synthesized, and analyzed on various metal surfaces (Cu, Ag). Our results reveal different binding modes depending on the molecular structure and metal surface. The molecular design enables us to achieve a flat-lying or upright configuration and even a transition between these two binding modes depending on the coverage and time. Importantly, the two binding modes exhibit different degrees of interfacial charge transfer between the molecule and the surface. This study provides essential microscopic insight into the NHI adsorption geometry and interfacial charge transfer for the optimization of heterogeneous catalysts in coordination chemistry.

Pyridinium-Derived Mesoionic N-Heterocyclic Olefins (py-mNHOs)

Mesoionic polarization allows access to electron-rich olefins that have found application as organocatalysts, ligands, or nucleophiles. Herein, we report the synthesis and characterization of a series of 3-methylpyridinium-derived mesoionic olefins (py-mNHOs). We used a DFT-supported design concept, which showed that the introduction of aryl groups in the 1-, 2-, 4-, and 6-positions of the heterocyclic core allowed the kinetic stabilization of the novel mesoionic compounds. Tolman electronic parameters indicate that py-mNHOs are remarkably strong σ-donor ligands toward transition metals and main group Lewis acids. Additionally, they are among the strongest nucleophiles on the Mayr reactivity scale. In reactions of py-mNHOs with electron-poor π-systems, a gradual transition from the formation of zwitterionic adducts via stepwise to concerted 1,3-dipolar cycloadditions was observed experimentally and analyzed by quantum-chemical calculations.