Preparation and characterization of HAP/carboxymethyl chitosan nanocomposites

Combination of self-assembling system and N,O-carboxymethyl chitosan improves ocular residence of anti-glaucoma drug

Glaucoma is known to be one of the principal causes of vision loss due to elevated intraocular pressure. Currently, latanoprost eye drops is used as first-line treatment for glaucoma; however, it possesses low bioavailability due to rapid precorneal clearance. A novel delivery system with a mucoadhesive property could overcome this problem. Therefore, we attempt to develop a combination of self-assembling latanoprost nanomicelles (Latcel) and a mucoadhesive polymer (N,O-carboxymethyl chitosan: N,O-CMC) to improve the corneal residence time. Latcel was developed using Poloxamer-407 by thin film hydration method, followed by the addition of N,O-CMC using simple solvation to obtain Latcel-CMC and characterized using various physicochemical characterization techniques. The particle size of Latcel-CMC was 94.07 ± 2.48 nm and a zeta potential of -16.03 ± 0.66 mV, with a sustained release for 24h whereas marketed latanoprost drops released 90 % of the drug within 1h. In vitro cytotoxicity studies, HET-CAM, and in vivo Draize test showed the biocompatibility of Latcel-CMC. Cellular uptake studies performed using fluorescein isothiocyanate (FITC) loaded nanomicelles in human corneal epithelial cells indicates the increased cellular uptake as compare to plain FITC solution. In vivo ocular residence time was evaluated in Wistar rats using Indocyanine green (ICG) loaded nanomicelles by an in vivo imaging system (IVIS), indicating Latcel-CMC (8h) has better residence time than plain ICG solution (2h). The Latcel-CMC showed improved corneal residence time and sustained release of latanoprost due to increased mucoadhesion. Thus, the developed N,O-Carboxymethyl chitosan based nanomicelles eye drop could be a better strategy than conventional eye drops for topical delivery of latanoprost to treat glaucoma.

Zizyphus mauritiana seed extract: Paving the way for next-generation bone constructs with nano-fluorohydroxyapatite/carboxymethyl chitosan nanocomposite scaffold

This is the first study that explored the potential use of Zizyphus mauritiana seed extract (ZSE) to synthesize nano-fluorohydroxyapatite/carboxymethyl chitosan nanocomposite scaffolds at different concentrations (CFZ1, CFZ2 and CFZ3) using co-precipitation method. The proposed scaffolds showed presence of intermolecular H bonding interactions between the constituents, according to the FTIR. The mechanical studies revealed shore hardness of 72 ± 4.6 and optimal compressive modulus in case of CFZ3 [1654.48 ± 1.6 MPa], that was comparable with that of human cortical bone. The SEM, TEM and platelet adhesion images corroborated uniformly distributed needle like particles in case of CFZ3 with an average size ranging from 22 to 26 nm, linked rough morphology, and appropriate hemocompatibility. The markedly up regulation in the ALP activity and protein adsorption upon increasing ZSE concentration demonstrated that CFZ nanocomposite scaffolds were compatible with osteoblastic cells relative to CF nanocomposite. The cytotoxicity study indicated that CFZ nanocomposite do not induce toxicity over MG-63 and did not aggravate LDH leakage in contrast to CF. The histopathological investigations on albino rats confirmed significantly improved regeneration of bone in the repair of a critical-size [8 mm] calvarium defect. Therefore, CFZ3 nanocomposite scaffold represents a simple, off-the-shelf solution to the combined challenges associated with bone defects.

Injectable multifunctional carboxymethyl chitosan/hyaluronic acid hydrogel for drug delivery systems

Injectable hydrogels with notable mechanical properties and self-healing ability are promising carriers for use as a drug delivery system. Here, adipic acid dihydrazide (ADH) and calcium ions (Ca2+) were introduced into quaternary ammonium carboxymethyl chitosan and aldehyde-modified hyaluronic acid hydrogels (QCS + OHA). The hydrogels were synthesized through the interaction of the Schiff bases (imine bonds, acylhydrazone bonds) and coordination bonds via a facile one-step approach. The gelation time (∼54 s) ensured excellent injectability. The QCS + OHA + ADH + Ca2+ hydrogel had notable mechanical properties (compressive stress up to 896.30 KPa), good self-healing ability (up to 94 %), good pH responsiveness, and excellent antibacterial properties. In addition, the QCS + OHA + ADH + Ca2+ hydrogel had a high drug loading capacity (121.3 mg/g) and sustained drug release behaviour (≥120 h). The results of cytotoxicity tests showed a high cell proliferation rate (up to 98 %) and good cytocompatibility. In summary, this work presents an injectable and self-healing pH-responsive hydrogel that can be used as a carrier for drug delivery systems.

Chitosan Nanocomposites as Wound Healing Materials: Advances in Processing Techniques and Mechanical Properties

This review discusses the increasing potential of chitosan nanocomposites as viable materials capable of targeting these debilitating factors. This review focuses on various techniques used to process chitosan nanocomposites and their mechanical properties. Chitosan nanocomposites are regarded as highly effective antimicrobials for the treatment of chronic wounds. Chitosan nanocomposites, such as chitosan/polyethylene and oxide/silica/ciprofloxacin, demonstrate efficient antibacterial activity and exhibit no cytotoxicity against Human Foreskin Fibroblast Cell Lines (HFF2). Other studies have also showcased the capacity of chitosan nanocomposites to accelerate and improve tissue regeneration through increment in the number of fibroblast cells and angiogenesis and reduction of the inflammation phase. The layer-by-layer technique has benefits, ensuring its suitability in preparing chitosan nanocomposites for drug delivery and wound dressing applications. While the co-precipitation route requires a cross-linker to achieve stability during processing, the solution-casting route can produce stable chitosan nanocomposites without a cross-linker. By using the solution casting method, fillers such as multi-walled carbon nanotubes (MWCNTs) and halloysite nanotubes (HTs) can be uniformly distributed in the chitosan, leading to improved mechanical properties. The antibacterial effects can be achieved with the introduction of AgNPs or ZnO. With the increasing understanding of the biological mechanisms that control these diseases, there is an influx in the introduction of novel materials into the mainstream wound care market.

A review on adsorptive removal of dyes from wastewater by hydroxyapatite nanocomposites

Dye removal from wastewater is of prominence due to its hostile effects on human health and the environment. The complex structure of the dye molecule is responsible for its difficulty in removal. Adsorption is found to be a promising technique to eliminate dye wastes due to its high removal capacity at low concentration. Among different adsorbents used, hydroxyapatite is a biocompatible adsorbent that is relatively efficient in both anionic and cationic dye removal. Recently, modification of hydroxyapatite by doping with other materials to increase its removal efficiency has gained much attention. This review summarizes compilation of recent literature on the removal of anionic and cationic dye by different hydroxyapatite nanocomposites, comparison of adsorption capacities of different hydroxyapatite nanocomposites, the possible adsorption mechanism of removal of dyes, the general isotherm, and kinetic and thermodynamic studies explaining the type of adsorption and the characteristics, advantages, and limitations of adsorbents.

Synthesis of carboxymethyl chitosan-functionalized graphene nanomaterial for anticorrosive reinforcement of waterborne epoxy coating

In this study, a carboxymethyl chitosan functionalized graphene (CMCS-rGO) nanomaterial was successfully synthesized in aqueous solution by non-covalent functionalization method. Fourier transform infrared, Raman, ultraviolet visible spectroscopy and thermogravimetric analysis confirmed that carboxymethyl chitosan had been successfully anchored on the surface of graphene. In addition, the CMCS-rGO was used as an anticorrosive nanofiller to be added to waterborne epoxy (EP) coatings to protect steel substrates. The corrosion protection behavior of all coatings was tested by electrochemical workstation, and the results proved that the incorporation of well-dispersed CMCS-rGO nanomaterials could significantly improve the anti-corrosion performance of waterborne epoxy coatings. Furthermore, even after 180 days of immersion, the impedance modulus value of the 0.2 % CMCS-rGO/EP at |Z|_f =0.01 Hz was still approximately 2 orders of magnitude higher than that of the EP.

One-dimensional hydroxyapatite materials: preparation and applications

As one of the biominerals, hydroxyapatite (HAP) plays important roles in biology, and inspires researchers to investigate HAP-based materials for the applications in various biomedical fields. Among them, one-dimensional (1-D) micro-/nanostructured HAP materials have attracted great interest in the last decades. This review summarizes the preparation and applications of 1-D HAP materials, and discusses different aspects of 1-D HAP materials. Various synthetic methods have been developed to prepare 1-D HAP materials with different morphologies, sizes, surface properties and crystallinities. In addition, elements-substituted 1-D HAP materials and composites have also been prepared. Surfactants and additives are usually adopted to control the nucleation and growth of 1-D HAP materials, but the related mechanisms are not very clear yet. The applications of 1-D HAP materials have been widely investigated, and the biomedical applications show great prospect but still need further improvements. A new kind of highly flexible fire-resistant inorganic paper made of ultralong HAP nanowires has been developed and is a promising alternative of the traditional cellulose paper for valuable archives and important documents. Regardless of the advances, further studies should be made for preparing 1-D HAP materials with controlled structures, sizes and morphologies and for boosting their various applications.

Preparation, characterization and toxicology properties of α- and β-chitosan Maillard reaction products nanoparticles

In this study, β-chitosan (CS) Maillard reaction (MR) NPs was prepared to improve the water solubility of CS NPs. The α- and β-CS MR was firstly induced by high intensity ultrasound-assisted (UA) water-bath heating at 80°C for 8h. The α- and β-CS Maillard reaction products (MRPs NPs were then prepared by ionic gelation method between the positively charged primary amino groups of CS and the negatively charged groups of sodium tripolyphosphate (TPP). The α- and β-CS MRPs NPs had particle size of 42.49 and 61.74nm, and Zeta-potential of 27.43 and 35.13mV, respectively. The prepared α- and β-CS MRPs NPs was characterized by transmission electron microscope (TEM), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA)-differential scanning calorimetry (DSC) to verify whether α- and β-CS MRPs has been incorporated into the CS NPs. The α- and β-CS MRPs NPs exhibited no significant difference (p>0.05) in antioxidant activity compared with α- and β-CS MRPs at the same concentration based on reducing power, DPPH radical scavenging activity, and ORAC values. The cytotoxicity test of α- and β-CS MRPs NPs showed good cell viability (70.86-99.16%) of human pulmonary microvascular endothelial cells (HLMVEC) at the concentration range from 0.12 to 1mg/mL, and fluorescein-5-isothiocyanate (FITC)-α- and β-CS MRPs NPs maintained the morphological characteristics of living cells. These results showed that α- and β-CS MRPs NPs can be used as water-soluble antioxidant substances for applications in food and other fields.

Preparation of Highly Dispersed Reduced Graphene Oxide Modified with Carboxymethyl Chitosan for Highly Sensitive Detection of Trace Cu(II) in Water

In this article, reduced graphene oxide (RGO)/carboxymethyl chitosan (CMC) composites (RGO/CMC) were synthesized by a hydrothermal method through in-situ reduction and modification of graphene oxide (GO) in the presence of CMC. An electrochemical sensor for the determination of Cu(II) by differential pulse anodic stripping voltammetry (DPASV) was constructed by an electrode modified with RGO/CMC. The fabricated electrochemical sensor shows a linear range of 0.02⁻1.2 μmol·L^-1, a detection limit of 3.25 nmol·L^-1 (S/N = 3) and a sensitivity of 130.75 μA·μmol·L^-1·cm^-2, indicating the sensor has an excellent detection performance for Cu(II).

Silk sericin microcapsules with hydroxyapatite shells: protection and modification of organic microcapsules by biomimetic mineralization

Silk protein sericin based organic–inorganic hybrid microcapsules are fabricated by incubating sericin microcapsules with a supersaturated calcium phosphate solution containing citric acid.

Effect of γ-rays on carboxymethyl chitosan for use as antioxidant and preservative coating for peach fruit

Carboxymethyl chitosan (CMCS) was synthesized by alkylation of chitosan using monochloroacetic acid and characterized by FTIR and (1)H-NMR spectroscopies. Different molecular weights (Mws) of CMCS were prepared by radiation degradation of CMCS in the solution form at different irradiation doses. The structural changes and Mw of degraded CMCS were confirmed by UV-Vis, FTIR and GPC. The antioxidant activity of CMCS was evaluated using scavenging effect on DPPH radicals, reducing power and ferrous ion chelating activity assays. The antioxidant activity of CMCS enhanced with decreasing CMCS Mw. The possible practical use of CMCS as preservative coating for peach fruit by dipping treatment after 10 days of storage at ambient temperature was investigated. The CMCS with lower Mw had a good effect on delaying spoilage and decreasing malondialdehyde (MDA) content of peach fruits suggesting their possible use as antioxidant and preservative coating.

Enhancement of the controlled-release properties of chitosan membranes by crosslinking with suberoyl chloride

A novel crosslinking agent, suberoyl chloride, was used to crosslink N-phthaloyl acylated chitosan and improves the properties of chitosan membranes. Membranes with different crosslinking degrees were synthesized. The derivatives were characterized by Fourier transform infrared spectroscopy and ¹³C solid state nuclear magnetic resonance spectroscopy, which indicated that the crosslinking degrees ranged from 0 to 7.4%. The permeabilities of various plant nutrients, including macroelements (N, P, K), microelements (Zn²⁺ and Cu²⁺), and a plant growth regulator (naphthylacetic acid), were varied by moderate changes in crosslinking degree, indicating that the controlled-release properties can be regulated in this way. The film-forming ability of native chitosan was maintained, whilst mechanical properties, hydrophobicity and controlled permeability were improved. These dramatic improvements occurred with a small amount of added suberoyl chloride; excessive crosslinking led to membranes with unwanted poor permeability. Thus, both the mechanical properties and permeability of the crosslinked membrane can be optimized.

Preparation of a Facilitated Transport Membrane Composed of Carboxymethyl Chitosan and Polyethylenimine for CO2/N2 Separation

The miscibility of carboxymethyl chitosan/polyethylenimine (CMCS/PEI) blends was analyzed by FT-IR, TGA and SEM. Defect-free CMCS/PEI blend membranes were prepared with polysulfone (PSf) ultrafiltration membranes as support layer for the separation of CO₂/N₂ mixtures. The results demonstrate that the CMCS/PEI blend is miscible, due to the hydrogen bonding interaction between the two targeted polymers. For the blended membrane without water, the permeability of CO₂ gas is 3.6 × 10⁻⁷ cm³ cm⁻² s⁻¹ cmHg⁻¹ and the corresponding separation factor for CO₂ and N₂ gas is about 33 at the pressure of 15.2 cmHg. Meanwhile, the blended membrane with water has the better permselectivity. The blended membrane containing water with PEI content of 30 wt% has the permeance of 6.3 × 10⁻⁴ cm³ cm⁻² s⁻¹ cmHg⁻¹ for CO₂ gas and a separation factor of 325 for CO₂/N₂ mixtures at the same feed pressure. This indicates that the CO₂ separation performance of the CMCS/PEI blend membrane is higher than that of other facilitated transport membranes reported for CO₂/N₂ mixture separation.

Synthesis of a Cellulose-Magnetic Nanocomposite in Ionic Liquid

Cellulose nanocomposite is one of the most fascinating materials with broad applications. In this work, cellulose-magnetite nanocomposite has been prepared by dispersion of magnetite nanoparticles in a homogenous ionic liquid solution of grafted cellulose. Bagasse cellulose was first grafted with polymethacrylic acid in 1-butyl-3-methylimidazolium, and then fabricated with Fe3O4 nanoparticles during the homogeneous media. The obtained nanocomposite contained high content of iron due to the clelation of the grafted cellulose and Fe3O4 nanoparticles. It also exhibited superparamagnetic behavior with 8.606 emu/g saturation magnetizations. The cellulose-magnetite nanocomposite will be potential for the development of functional cellulose and protective materials for electromagnet radiation or microwaves.

Biocomposites and hybrid biomaterials based on calcium orthophosphates

The state-of-the-art of biocomposites and hybrid biomaterials based on calcium orthophosphates that are suitable for biomedical applications is presented in this review. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through successful combinations of the desired properties of matrix materials with those of fillers (in such systems, calcium orthophosphates might play either role), innovative bone graft biomaterials can be designed. Various types of biocomposites and hybrid biomaterials based on calcium orthophosphates, either those already in use or being investigated for biomedical applications, are extensively discussed. Many different formulations, in terms of the material constituents, fabrication technologies, structural and bioactive properties as well as both in vitro and in vivo characteristics, have already been proposed. Among the others, the nanostructurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using biocomposites and hybrid biomaterials based on calcium orthophosphates in the selected applications are highlighted. As the way from the laboratory to the hospital is a long one, and the prospective biomedical candidates have to meet many different necessities, this review also examines the critical issues and scientific challenges that require further research and development.

Nanosized and nanocrystalline calcium orthophosphates

Recent developments in biomineralization have already demonstrated that nanosized crystals and particles play an important role in the formation of hard tissues of animals. Namely, it is well established that the basic inorganic building blocks of bones and teeth of mammals are nanosized and nanocrystalline calcium orthophosphates in the form of apatites. In mammals, tens to hundreds nanocrystals of a biological apatite have been found to be combined into self-assembled structures under the control of bioorganic matrixes. Therefore, application and prospective use of the nanosized and nanocrystalline calcium orthophosphates for a clinical repair of damaged bones and teeth are also well known. For example, greater viability and better proliferation of various types of cells have been detected on smaller crystals of calcium orthophosphates. Thus, the nanosized and nanocrystalline forms of calcium orthophosphates have great potential to revolutionize the hard tissue-engineering field, starting from bone repair and augmentation to controlled drug delivery systems. This paper reviews the current state of art and recent developments of various nanosized and nanocrystalline calcium orthophosphates, starting from synthesis and characterization to biomedical and clinical applications. The review also provides possible directions for future research and development.

Nanodimensional and Nanocrystalline Apatites and Other Calcium Orthophosphates in Biomedical Engineering, Biology and Medicine

Recent developments in biomineralization have already demonstrated that nanosized particles play an important role in the formation of hard tissues of animals. Namely, the basic inorganic building blocks of bones and teeth of mammals are nanodimensional and nanocrystalline calcium orthophosphates (in the form of apatites) of a biological origin. In mammals, tens to hundreds nanocrystals of a biological apatite were found to be combined into self-assembled structures under the control of various bioorganic matrixes. In addition, the structures of both dental enamel and bones could be mimicked by an oriented aggregation of nanosized calcium orthophosphates, determined by the biomolecules. The application and prospective use of nanodimensional and nanocrystalline calcium orthophosphates for a clinical repair of damaged bones and teeth are also known. For example, a greater viability and a better proliferation of various types of cells were detected on smaller crystals of calcium orthophosphates. Thus, the nanodimensional and nanocrystalline forms of calcium orthophosphates have a great potential to revolutionize the field of hard tissue engineering starting from bone repair and augmentation to the controlled drug delivery devices. This paper reviews current state of knowledge and recent developments of this subject starting from the synthesis and characterization to biomedical and clinical applications. More to the point, this review provides possible directions of future research and development.