Segmented poly(urethane-urea) elastomers based on polycaprolactone: Structure and properties

Conditioning the microenvironment for soft tissue regeneration in a cell free scaffold

The use of cell-free scaffolds for the regeneration of clinically relevant volumes of soft tissue has been challenged, particularly in the case of synthetic biomaterials, by the difficulty of reconciling the manufacturing and biological performance requirements. Here, we investigated in vivo the importance of biomechanical and biochemical cues for conditioning the 3D regenerative microenvironment towards soft tissue formation. In particular, we evaluated the adipogenesis changes related to 3D mechanical properties by creating a gradient of 3D microenvironments with different stiffnesses using 3D Poly(Urethane-Ester-ether) PUEt scaffolds. Our results showed a significant increase in adipose tissue proportions while decreasing the stiffness of the 3D mechanical microenvironment. This mechanical conditioning effect was also compared with biochemical manipulation by loading extracellular matrices (ECMs) with a PPAR-γ activating molecule. Notably, results showed mechanical and biochemical conditioning equivalency in promoting adipose tissue formation in the conditions tested, suggesting that adequate mechanical signaling could be sufficient to boost adipogenesis by influencing tissue remodeling. Overall, this work could open a new avenue in the design of synthetic 3D scaffolds for microenvironment conditioning towards the regeneration of large volumes of soft and adipose tissue, with practical and direct implications in reconstructive and cosmetic surgery.

Porous polycaprolactone and polycarbonate poly(urethane urea)s via emulsion templating: structures, properties, cell growth

Macroporous, emulsion-templated, linear poly(urethane urea) elastomers were synthesized from polyols (poly(ε-caprolactone)s or polycarbonates) and a diisocyanate. Growing cells adhered to the walls, spread, and penetrated into the porous structures.

Investigation of the effects of polycaprolactone molecular weight and graphene content on crystallinity, mechanical properties and shape memory behavior of polyurethane/graphene nanocomposites

In the following work, different shape memory polyurethanes (SMPUs) were synthesized using polycaprolactone (PCL) with various molecular weights, hexamethylene diisocyanate (HDI), and 1,4-butanediol (BDO). Afterward, polyurethane (PU)-based nanocomposites were prepared with different graphene nanosheets contents via solution casting method. Hydrogen nuclear magnetic resonance (¹H-NMR) was used to confirm the chemical structure of PCLs and calculate their actual molecular weights. The chemical structure and hydrogen bonding content of PUs and their nanocomposites were investigated by Fourier-transform infrared spectroscopy (FTIR). According to the results, the hydrogen bonding contents of nanocomposites were reduced by graphene nanosheets inhibition from the formation of hydrogen bonds between polyurethane chains. Thermal properties and crystalline morphology of samples were studied using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The results indicated that the transition temperature and crystallinity of samples were changed by variation of the molecular weight of the PCL component and of the concentration of the graphene nanosheets. Graphene nanosheets dispersion in polyurethane matrix was investigated using the field emission scanning electron microscope (FE-SEM). The mechanical and shape memory properties of different PUs and their nanocomposites were determined at both 75 °C and room temperature. It can be deduced from the results that the modulus of the samples increased due to the rigidity of nanosheets. Furthermore, the restricted mobility of PCL chains, due to the presence of nanosheets, led to higher shape fixity ratio. Moreover, the nanosheets prevented the stress transfer on the hard segments which increased the shape recovery ratio.

Increased X-ray Visualization of Shape Memory Polymer Foams by Chemical Incorporation of Iodine Motifs

Shape memory polymers can be programmed into a secondary geometry and recovered to their primary geometry with the application of a controlled stimulus. Porous shape memory polymer foam scaffolds that respond to body temperature show particular promise for embolic medical applications. A limitation for the minimally invasive delivery of these materials is an inherent lack of X-ray contrast. In this work, a triiodobenzene containing a monomer was incorporated into a shape memory polymer foam material system to chemically impart X-ray visibility and increase material toughness. Composition and process changes enabled further control over material density and thermomechanical properties. The proposed material system demonstrates a wide range of tailorable functional properties for the design of embolic medical devices, including X-ray visibility, expansion rate, and porosity. Enhanced visualization of these materials can improve the acute performance of medical devices used to treat vascular malformations, and the material porosity provides a healing scaffold for durable occlusion.

Incorporating isosorbide as the chain extender improves mechanical properties of linear biodegradable polyurethanes as potential bone regeneration materials

Novel linear biodegradable polyurethanes based on poly (d,l-lactic acid) as soft segments and isosorbide as chain extender were exhibited with high molecular weight and appropriate mechanical performances, promising as the scaffold materials for bone regeneration.

Determination of amino groups on functionalized graphene oxide for polyurethane nanomaterials: XPS quantitation vs. functional speciation

Simple spectrophotometric method for the estimation of accessible amino groups and preparation of polyurethane nanocomposites.

Indirect three-dimensional printing: A method for fabricating polyurethane-urea based cardiac scaffolds

Biomaterial scaffolds are a key part of cardiac tissue engineering therapies. The group has recently synthesized a novel polycaprolactone based polyurethane-urea copolymer that showed improved mechanical properties compared with its previously published counterparts. The aim of this study was to explore whether indirect three-dimensional (3D) printing could provide a means to fabricate this novel, biodegradable polymer into a scaffold suitable for cardiac tissue engineering. Indirect 3D printing was carried out through printing water dissolvable poly(vinyl alcohol) porogens in three different sizes based on a wood-stack model, into which a polyurethane-urea solution was pressure injected. The porogens were removed, leading to soft polyurethane-urea scaffolds with regular tubular pores. The scaffolds were characterized for their compressive and tensile mechanical behavior; and their degradation was monitored for 12 months under simulated physiological conditions. Their compatibility with cardiac myocytes and performance in novel cardiac engineering-related techniques, such as aggregate seeding and bi-directional perfusion, was also assessed. The scaffolds were found to have mechanical properties similar to cardiac tissue, and good biocompatibility with cardiac myocytes. Furthermore, the incorporated cells preserved their phenotype with no signs of de-differentiation. The constructs worked well in perfusion experiments, showing enhanced seeding efficiency. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1912-1921, 2016.

Physicochemical characterization of segmented polyurethanes prepared with glutamine or ascorbic acid as chain extenders and their hydroxyapatite composites

Segmented polyurethanes with glutamine or ascorbic acid as chain extenders and their hydroxyapatite composites for bone tissue regeneration.