Novel feature of nano-titanium dioxide on textiles: Antifelting and antibacterial wool

Effect of the Photoreduction Process on the Self-Cleaning and Antibacterial Activity of Au-Doped TiO2 Colloids on Cotton Fabric

This study aims at understanding the effect of the photoreduction process during the synthesis of gold (Au)-doped TiO2 colloids on the conferred functionalities on cotton fabrics. TiO2/Au and TiO2/Au/SiO2 colloids were synthesized through the sol-gel method with and without undergoing the photoreduction step based on different molar ratios of Au:Ti (0.001 and 0.01) and TiO2/SiO2 (1:1 and 1:2.3). The colloids were applied to cotton fabrics, and the obtained photocatalytic self-cleaning, wet photocatalytic activity, UV protection, and antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria were investigated. The obtained results demonstrated that the photoreduction of Au weakened the self-cleaning effect and reduced the photocatalytic activity of coated fabrics. Also, an excess amount of Au deteriorated the photocatalytic activity under both UV and visible light. The most efficient self-cleaning effect was obtained on fabrics coated with a ternary TiO2/Au/SiO2 colloid containing ionic Au, where it decomposed coffee and red-wine stains after 3 h of illumination. Adding silica (SiO2) made the fabrics superhydrophilic and led to greater methylene blue (MB) dye adsorption, a faster dye degradation pace, and more efficient stain removal. Moreover, the photoreduction process affected the size of Au nanoparticles (NPs), weakened the antibacterial activity of fabrics against both types of tested bacteria, and modestly increased the UV protection. In general, the photoactivity of Au-doped colloids was influenced by the synthesis method, the ionic and metallic states of the Au dopant, the concentration of the Au dopant, and the presence and concentration of silica.

The Influence of Titanium Dioxide (TiO2) Particle Size and Crystalline Form on the Microstructure and UV Protection Factor of Polyester Substrates

The inclusion of particles in a polymeric substrate to achieve certain properties is a well-known practice. In the case of textile substrates, this practice may deeply affect the structure of the produced yarns, as even a filament with no textile applications can be obtained. In this manuscript, titanium dioxide (TiO2) particles were incorporated into polyester (PET) chips and the influence of these fillers on the properties of yarn and fabric, and the ultraviolet protection factor (UPF) was assessed. For this purpose, rutile and anatase crystalline forms of TiO2, as well as the size of the particles, were evaluated. Moreover, parameters such as mechanical properties, orientation of the macromolecules and thermal behavior were analyzed to ensure that the textile grade is maintained throughout the production process. The results showed that the inclusion of micro- and nanoparticles of TiO2 decreases the molecular weight and tenacity of PET. Also, although orientation and crystallinity varied during the textile process, the resulting heatset fabrics did not present important differences in those parameters. Finally, the attainment of textile-grade PET-TiO2 fabrics with UPF indexes of 50+ with both rutile and anatase and micro- and nano-sized TiO2 forms was demonstrated.

Enhancing the multifunctional properties of cellulose fabrics through in situ hydrothermal deposition of TiO2 nanoparticles at low temperature for antibacterial self-cleaning under UV-Vis illumination

This study aimed to improve the multifunctional properties (including photocatalysis, stability reusability, self-cleaning, antibacterial effects, and thermal radiation shielding) of cellulose fabrics through incorporation of TiO2 nanoparticles. To achieve this, anatase TiO2 nanoparticles were synthesized in situ and deposited onto cotton fabrics through hydrothermal method. The presence of TiO2 nanoparticles in cellulose fabrics greatly enhanced the photocatalytic efficiency and adsorption range and did not damage the fabric fibers. The TiO2-coated cotton exhibited an outstanding photocatalytic efficiency, with dye removal rates of 92.20 % ± 0.015 % and 99.68 % ± 0.002 % under UV-A and visible illumination, respectively. In addition, the material exhibited thermal radiation shielding properties, in which no heat absorption was observed within 60 min at 40 °C-70 °C. To further enhance the hydrophobicity, the TiO2-coated cotton was surface-modified with 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDTS). The resulting PFDTS/TiO2-coated cotton was superhydrophobic with a water contact angle of 156.50° ± 0.05° with a sliding angle of 4.33° ± 0.47° and roughness of 67.35 nm. The superhydrophobicity of the PFDTS/TiO2-coated cotton also facilitated self-cleaning through water injection to remove soil impurities. Furthermore, the PFDTS/TiO2-coated cotton exerted antibacterial effects against gram-negative (Escherichia coli) and gram-positive (Staphylococcus aureus) bacteria under UV-A or visible illumination. These nanocomposite fabrics with multifunctional properties have potential for industrial, military, and medical applications.

Antibacterial Textile Based on Hydrolyzed Milk Casein

Antimicrobial textile structures are developed based on polypropylene (PP) and a natural material, hydrolyzed casein. The casein, from bovine milk, is subjected to acid hydrolysis in aqueous media, then blended into the PP matrix in the melt phase by extrusion. The obtained blend, containing 5 wt.% of hydrolyzed casein, is then processed by a melt spinning process to get multifilaments, leading to the production knitting structures. Thanks to the addition of the hydrolyzed casein, the obtained textile showed a strong antibacterial activity towards both Gram (+) and Gram (−) bacterial strains. The addition of 5 wt.% hydrolyzed casein does not significantly impact the mechanical properties of PP in the dumbbells form, but a small decrease was observed in the tenacity of the filaments. No moisture retention was observed after the addition of hydrolyzed casein, but the rheological behavior was slightly affected. The obtained results can contribute to addressing concerns regarding nonrenewable antibacterial agents used in textile materials, particularly their effects on the environment and human health, by offering antibacterial agents from a biobased and edible substance with high efficiency. They are also promising to respond to issues of wasting dairy products and recycling them, in addition to the advantages of using melt processes.

Studies of Polylactic Acid and Metal Oxide Nanoparticles-Based Composites for Multifunctional Textile Prints

A novel approach toward the production of multifunctional printed technical textiles is reported. Three different metal oxides nanoparticles including titanium dioxide, magnesium oxide, and zinc oxide were prepared and characterized. Both natural wool and synthetic acrylic fibers were pretreated with the prepared metal oxide nanoparticles followed by printing using polylactic acid based paste containing acid or basic dyestuffs. Another route was applied via post-treatment of the targeted fabrics with the metal oxide nanoparticles after running the printing process. The color strength (K/S) and colorfastness properties of pretreated and post-treated printed fabrics were evaluated and compared with untreated printed fabrics. The presence of nanoparticles on a fabric surface during the coating process was found to significantly increase the color strength value of the coated textile substrates. The increased K/S value depended mainly on the nature and concentration of the applied metal oxide, as well as the nature of colorant and fabric. In addition, the applied metal oxide nanoparticles imparted the printed fabrics with good antibacterial activity, high ultraviolet protection, photocatalytic self-cleaning, and improved colorfastness properties. Those results suggest that the applied metal oxide-based nanoparticles could introduce ideal multifunctional prints for garments.

Environmentally responsive and anti-bugs textile finishes - Recent trends, challenges, and future perspectives

Bugs, such as microorganisms and insects, are present in the environment and sometimes can be health-hazardous if the living environment is not maintained following proper hygienic regulations. In the present scenario of increasing public awareness, environmental consciousness, and growing demand for easy-care, and disinfected textiles, the manufacturing of protective and easy-to-care textiles has become a key necessity of the modern world. Comfortable, clean, hygienic, antimicrobial, and insect repelling properties of textile goods are gaining the accelerating research momentum as a basic requirement to produce multifunctional textiles. These functional finishes have numerous applications such as in-home textiles, bed nets, and tenting, camping gear as well as in military uniforms. Synthetic antimicrobial and insect repellents are quite effective against insects and microscopic organisms but are slightly toxic to the human being and the environment. To overcome these problems, researchers are considering natural agents for functional finishes, but their effectiveness is less durable to textile material. Besides needful advantages, the excessive use of dyes in finishing processes heavily required washing cycles and ultimately release various types of hazardous dyes or wasteful effluents in the environment. This review reports the chemical composition and recent developments in textile finishes, particularly antimicrobial and insect repellent textile finishes. A large number of commonly used antimicrobial agents (i.e. chitosan, zwitterionic compounds, silver and silver-based compounds, titanium dioxide nanoparticles, imidazolium salts, triclosan and quaternary ammonium salts) and insect repellent textile finishes (i.e. N‑N‑diethyl‑m‑toluamide, permethrin, cypermethrin, pyrethrum, picaridin, bioallethrin, citriodiol and essential oils) have been presented. Finally, the review is wrapped up with major research gaps/challenges, concluding remarks, and future opportunities in this area of research.

Advanced Functional Fibrous Materials for Enhanced Thermoregulating Performance

The concept of thermoregulating textiles capable of providing personal thermal management property (PTM) has attracted significant attention in recent years. It is considered as an emerging approach to promote the comfort and general well-being of wearers and also to mitigate the energy consumption load for indoor living space conditioning. Regulating the heat exchange between human body and environment has been the core subject of many studies on introducing the PTM functionality to textiles. This work provides an overview of the latest literature, summarizing the recent innovations and state-of-the-art approaches of controlling the heat gain and loss of textiles. To this end, methods to control the fundamental aspects of heat gain and loss of fabrics such as using near-infrared reflective materials and conductive nanomaterials, designing photonic structures of fabrics, and engineering nanoporous structures for passive cooling and heating effects will be discussed. Moreover, specific attention is given to the application of phase change materials in textiles, their integration methods, and the associated mechanisms. Several commercial methods such as adapting the innovative designs, introducing moisture management capability, and using air/liquid thermoregulating systems will also be discussed. This review article provides a clear picture of the concept of thermoregulating textiles and recommends some future research trajectories for this emerging field.

Synthesis and applications of nano-TiO2: a review

TiO₂-based nanomaterials have attracted prodigious attention as a photocatalysts in numerous fields of applications. In this thematic issue, the mechanism behind the photocatalytic activity of nano-TiO₂ as well as the critical properties have been reviewed in details. The synthesis routes and the variables that affect the size and crystallinity of nano-TiO₂ have also been discussed in detail. Moreover, a newly emerged class of color TiO₂, TiO₂ in aerogel form, nanotubes form, doped and undoped form, and other forms of TiO₂ have been discussed in details. Photocatalytic and photovoltaic applications and the type of nano-TiO₂ that is more suitable for these applications have been discussed in this review.

Enhanced antimicrobial and anticancer properties of ZnO and TiO2 nanocomposites

The study describes the antibacterial and anticancer activities of a nanocomposite prepared by mixing zinc oxide and titanium dioxide nanoparticles. The particle mixtures were analyzed by X-ray diffraction, Field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and dynamic light scattering techniques. Thus, analyzed samples were subject to disc diffusion method at various concentrations to analyze their antibacterial activities against two Gram-positive and two Gram-negative bacteria. The same samples were then analyzed for their anticancer activities on four different cell lines. The results indicate a synergistic effect of the nanocomposite on both antibacterial and anticancer properties when compared to their individual counterparts.

Sonosynthesis of nano TiO2 on wool using titanium isopropoxide or butoxide in acidic media producing multifunctional fabric

This study presents a novel idea to prepare nanocrystalline structure of TiO2 under ambient pressure at 60-65 °C using in situ sonochemical synthesis by hydrolysis of either titanium isopropoxide or titanium butoxide in an acidic aqueous solution. The nano titanium dioxide coated wool fabrics possess significant antibacterial/antifungal activity and self-cleaning property by discoloring Methylene blue stain under sunlight irradiation. This process has no negative effect on cytotoxicity and tensile strength of the sonotreated fabric even reduces alkaline solubility and photoyellowing and improves hydrophilicity. More titanium isopropoxide or titanium butoxide as a precursor led to higher photocatalytic activities of the treated fabrics. Also introducing more ethanol improved the adsorption of TiO2 on the wool fabric surface leading to enhanced photocatalytic activity. EDS and XRD patterns, SEM images, X-ray mapping confirmed the presence of nano TiO2 particles on the fabric surface. The role of both solvent and precursor concentrations on the various properties of the fabric was investigated and the optimized conditions were obtained using response surface methodology.

Laundering durability of photocatalyzed self-cleaning cotton fabric with TiO₂ nanoparticles covalently immobilized

Photocatalyzed self-cleaning cotton fabrics with TiO2 nanoparticles covalently immobilized are obtained by cograft polymerization of 2-hydroxyethyl acrylate (HEA) together with the surface functionalized TiO2 nanoparticles under γ-ray irradiation. The covalent bonds between the TiO2 nanoparticles and cotton fabrics bridged by poly(2-hydroxyethyl acrylate) (PHEA) graft chains is strong enough to survive 30 accelerated laundering circles, equivalent to 150 commercial or domestic launderings.

Utilization of monochloro-triazine β-cyclodextrin for enhancing printability and functionality of wool

Monochloro-triazine β-cyclodextrin (MCT-βCD) was successfully utilized to modify the wool fabric structure. The modified wool exhibited better post-printing, using different dyestuffs, and outstanding antibacterial activities most probably due to the remarkable capacity of grafted βCD moieties to form guest-host inclusion complexes in addition to the positive role of wool's active sites. The following treatment sequence: pre-modification, post-printing, followed by after-treatment with Ag-NP's colloid or triclosan derivatives was investigated. The extent of improvement in the aforementioned properties is governed by the degree of pre-modification, type of dyestuff and extent of fixation, type of antibacterial agent, its mode of interaction and extent of loading onto the modified printed wool. The imparted antibacterial functionalities were retained, more than 75%, even after 15 washing cycles.