Direct Z-scheme system of UiO-66 cubes wrapped with Zn0.5Cd0.5S nanoparticles for photocatalytic hydrogen generation synchronized with organic pollutant degradation

Optimized fabrication of Z-scheme photocatalyst based on MOF materials offers sustainable energy generation and environmental improvement due to their attractive properties. The Z-scheme heterojunctions consisting of UiO-66 cubes covered with Zn0.5Cd0.5S nanoparticles were fabricated by a facile solvothermal method. Thanks to the Z-scheme carrier transport under simulated sunlight irradiation, UiO-66@Zn0.5Cd0.5S exhibited enhanced photocatalytic performance of H2 generation synchronized with organic pollutant degradation in fluoroquinolone antibiotic wastewater. Synergistically, the highest comprehensive performance was obtained in ciprofloxacin solution. The H2 yield reached 224 μmol∙ g-1∙ h-1 and simultaneously the removal efficiency was up to 83.6 %. The degradation pathways revealed that the process of piperazine ring cleavage and decarboxylation also generates H protons, further promoting the production of H2. Therefore, the effective spatial separation and transfer of the photoinduced carriers are attributed to the good band structure, large specific surface area, and cooperative reduction and oxidation reactions of UiO-66@Zn0.5Cd0.5S, resulting in significant photocatalytic activity. The toxicity assessment of antibiotics and intermediate products during the photocatalytic reaction also verifies the reduction of environmental risk. This study highlights a promising way to expand the application of the MOFs-based photocatalyst in clean energy conversion coupling with water remediation.

Efficient photocatalytic degradation of antibiotics by binary heterojunction complex boron subphthalocyanine bromide/bismuth oxychloride

The development of stable and efficient heterojunction photocatalysts for wastewater environmental purification exhibits a significant challenge. Herien, a promising binary heterojunction complex comprising boron subphthalocyanine bromide/bismuth oxychloride (SubPc-Br/BiOCl) was successfully synthesized using the hydrothermal method, which involved the self-assembled of SubPc-Br on the surface of BiOCl via intermolecular π-π stacking interactions to compose an electron-transporting layer. The photocatalytic efficiency of SubPc-Br/BiOCl for the degradation of tetracycline and the minocycline exhibited a substantial improvement of 29.14% and 53.72%, respectively, compared to the original BiOCl. Experimental characterization and theoretical calculations elucidated that the enhanced photocatalytic performance of the SubPc-Br/BiOCl composite photocatalysts stemmed from the S-scheme electron transport mechanism at the interface between BiOCl and SubPc-Br supramolecules, which broadened the visible light absorption range, increased the carrier molecular efficiency, and accelerated the carriers. Furthermore, molecular dynamic (MD) simulations provided insights into the action trajectories of the two semiconductors, revealing that the presence of SubPc-Br enhances the water and organic pollutant adsorption capabilities of the BiOCl surface within the supramolecular array system. In conclusion, the synthesis and analysis of the binary heterojunction complex SubPc-Br/BiOCl yield valuable insights into the efficient photocatalytic degradation of antibiotics, holding great promise for diverse environmental applications.

An electrochemical biosensor for the amplification of thrombin activity by perylene-mediated photoinitiated polymerization

BACKGROUND

Thrombin, a coagulation system protease, is a key enzyme involved in the coagulation cascade and has been developed as a marker for coagulation disorders. However, the methods developed in recent years have the disadvantages of complex operation, long reaction time, low specificity and sensitivity. Meanwhile, thrombin is at a lower level in the pre-disease period. Therefore, to accurately diagnose the disease, it is necessary to develop a fast, simple, highly sensitive and specific method using signal amplification technology.

RESULTS

We designed an electrochemical biosensor based on photocatalytic atom transfer radical polymerization (photo-ATRP) signal amplification for the detection of thrombin. Sulfhydryl substrate peptides (without carboxyl groups) are self-assembled to the gold electrode surface via Au-S bond and serve as thrombin recognition probes. The substrate peptide is cleaved in the presence of thrombin to generate -COOH, which can form a carboxylate-Zr(IV)-carboxylate complex via Zr(IV) and initiator (α-bromophenylacetic acid, BPAA). Subsequently, an electrochemical biosensor was prepared by introducing polymer chains with electrochemical signaling molecules (ferrocene, Fc) onto the electrode surface by photocatalytic (perylene, Py) mediated ATRP using ferrocenylmethyl methacrylate (FMMA) as a monomer. The concentration of thrombin was evaluated by the voltammetric signal generated by square wave voltammetry (SWV), and the result showed that the biosensor was linear between 1.0 ng/mL ∼ 10 fg/mL, with a lower detection limit of 4.0 fg/mL (∼0.1 fM). Moreover, it was shown to be highly selective for thrombin activity in complex serum samples and for thrombin inhibition screening.

SIGNIFICANCE

The biosensor is an environmentally friendly and economically efficient strategy while maintaining the advantages of high sensitivity, anti-interference, good stability and simplicity of operation, which has great potential for application in the analysis of complex samples.

Z-scheme heterojunction g-C3N4-TiO2 reinforced chitosan/poly(vinyl alcohol) film: Efficient and recyclable for fruit packaging

Nanoparticles-loaded bio-based polymers have emerged as a sustainable substitute to traditional oil-based packaging materials, addressing the challenges of limited recyclability and significant environmental impact. However, the functionality and efficiency of nanoparticles have a significant impact on the application of bio-based composite films. Herein, graphitic carbon nitride (g-C3N4) and titanium dioxide (TiO2) coupled photocatalyst (g-C3N4-TiO2) was prepared by one-step calcination and introduced into chitosan (CS) and polyvinyl alcohol (PVA) solution to fabricate g-C3N4-TiO2/CS/PVA green renewable composite film via solution casting method. The results demonstrated the successful preparation of a Z-scheme heterojunction g-C3N4-TiO2 with exceptional photocatalytic activity. Furthermore, the incorporation of heterojunction enhanced mechanical properties, water barrier, and ultraviolet (UV) resistance properties of the fresh-keeping film. The g-C3N4-TiO2/CS/PVA composite film exhibited superior photocatalytic antibacterial preservation efficacy on strawberries under LED light, with a prolonged preservation time of up to 120 h, when compared to other films such as polyethylene (PE), CS/PVA, g-C3N4/CS/PVA, and TiO2/CS/PVA. In addition, the composite film has good recyclability and renewability. This work is expected to have great potential for low-cost fruit preservation and sustainable packaging, which also contributes to environmental protection.

Tragacanth gum-based copper oxide nanoparticles: Comprehensive characterization, antibiofilm, antimicrobial and photocatalytic potentials

Hereunder, we pioneered the synthesis of Copper Oxide nanoparticles (CuO NPs) utilizing Tragacanth gum (TG). The NPs were characterized using advanced techniques and assessed for different pharmaceutical and environmental perspectives. The successful formation of a colloidal NPs solution was confirmed by the appearance of a distinct black color and a distinct peak at 260 nm in UV-Visible spectrophotometry. The FTIR analysis unveiled a spectrum of functional groups responsible for the reduction and stabilization of CuO NPs. Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM) revealed size of NPs as 36.24 nm and 28 ± 04 nm respectively. Energy Dispersive X-ray (EDX) Analysis indicated weight percentages of 70.38 % for Cu and 18.88 % for O, with corresponding atomic percentages. The X-ray Diffraction (XRD) analysis revealed the orthorhombic crystal structure of the prepared CuO NPs. Antimicrobial assessments through disc-diffusion assays demonstrated significant zones of inhibition (ZOI) against gram-positive bacterial strains (Bacillus Halodurans and Micrococcus leutus) and a gram-negative bacterial strain (E. coli). Against the fungal strain Aspergillus niger, a ZOI of 18.5 ± 0.31 mm was observed. The NPs exhibited remarkable antioxidant potential determined through 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and H2O2 scavenging assays. At a concentration of 3 mg/mL, the NPs demonstrated biofilm inhibition rates of 96 %, 90 %, 89.60 %, and 72.10 % against Micrococcus luteus, Bacillus halodurans, MRSA and E.coli respectively. Furthermore, the CuO NPs showed a high photocatalytic potential towards the degradation of safranin dye under sunlight irradiation. In conclusion, the findings underline the promising multifunctional properties of TG-based CuO NPs for different practical applications.

Rational construction of visible-light-driven perylene diimides/Fe2O3@C derived from MIL-88A (Fe) heterojunction with S-scheme electron transfer pathway to activate peroxymonosulfate for degradation of antibiotics

The novel composite photocatalytic material perylene diimides/Fe2O3@C (PDIs/Fe2O3@C) was constructed by a simple hydrothermal-calcination method and an oil bath method. 20 % PDIs/Fe2O3@C displayed a 16.4-fold increase in the rate of tetracycline (TC) removal over Fe2O3@C at 8 min. The main factor that enhanced photocatalytic performance was due to the combination of PDIs with Fe2O3@C, which effectively improved the phenomenon during the self-assembly of highly agglomerative PDIs, increased the specific surface area of Fe2O3@C, exposed more reaction sites, and promoted the activation of peroxymonosulfate (PMS) by Fe2+/Fe3+; and secondly, the composite of two different materials, both organic and inorganic, which effectively promoted the photogenerated electron transfer and the separation of electron-hole pairs, the a new S-scheme electron transport pathway is formed, which effectively promoted the photogenerated electron transfer as well as the e--h+ separation, which was more favorable for the activation of PMS. The whole reaction pathway and product toxicity were thoroughly evaluated by Fukui function calculations, Liquid Chromatograph Mass Spectrometer (LC-MS), and Toxicity Estimation Software Tool (T.E.S.T.) simulation results, which demonstrated the rationality of the degradation pathway and the greatly reduced product toxicity. Moreover, the composites were effective and versatile for all other antibiotics (chlortetracycline (CTC), ciprofloxacin (CIP) and sulfadiazine (SDZ)). As an advanced oxidation process, the activation of PDIs/Fe2O3@C under visible light shows its potential application in pollutant degradation, which provides new perspectives and ideas for further effective treatment of real wastewater.

MoS2-based nanocomposites and aerogels for antibiotic pollutants removal from wastewater by photocatalytic degradation process: A review

Photocatalytic technologies based on molybdenum disulfide (MoS2) catalysts are effective, eco-friendly, and promising for antibiotic pollutants treatment. The technologies used by MoS2-based nanocomposites and aerogels for efficient degradation of antibiotics are reviewed in detail for the first time in this paper. The fundamental aspects of MoS2 were comprehensively scrutinized, encompassing crystal structure, optical properties, and photocatalytic principle. Then, the main synthesized methods and advantages/disadvantages for the preparation of MoS2-based nanocomposites and aerogels were systematically presented. Besides, a comprehensive overview of diverse MoS2-based nanocomposites and aerogels photo-degradation systems that enhanced the degradation of antibiotic pollutants were revealed. Meanwhile, the photo-degradation mechanism concentrated on the photoelectron transfer pathways and reactive oxygen species (ROS) were systematically evaluated. Finally, the challenges and perspectives for deeply development of MoS2-based nanocomposites and aerogels were discussed. This review may help researchers to deeply understand the research status of MoS2-based nanocomposites and aerogels for antibiotics removal, and makes clear the photo-degradation mechanism from photoelectron transfer pathways and ROS aspects of MoS2-based nanocomposites and aerogels.

Vacancy induced enhanced photocatalytic activity of nitrogen doped CuO NPs synthesized by Co-precipitation method

The chemical co-precipitation method, an effective approach in the synthesis of nanomaterials, was used to synthesize CuO nanoparticles (NPs). Structural and morphological modification of undoped and nitrogen (N) doped CuO nanoparticles were studied thoroughly using X-ray diffraction (XRD), FT-IR and field emission scanning electron microscope (FE SEM). Doping effect on defects was investigated using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL) spectroscopy. Thus, the effect of doping on crystallinity, crystallite size, strain induced in lattice, defects and electron-hole recombination rate were investigated. Optical band gap was calculated using Kubelka-Munk function from the diffuse reflectance spectra (DRS) obtained using ultraviolet visible (UV-Vis) spectroscopy. Finally, photocatalytic performance was studied from rhodamine B (Rh B) degradation and reaction kinetics were analyzed. Maximum degradation efficiency was obtained for 1.0 mol% N doped CuO NPs which also exhibited minimum band gap and lowest electron-hole recombination rate. For the optimum doping concentration, nitrogen was found to create oxygen vacancies while substituting oxygen in the lattice, and thus reduce electron-hole recombination rate and increase photocatalytic degradation rate effectively.

A comparative study on green synthesis and characterization of Mn doped ZnO nanocomposite for antibacterial and photocatalytic applications

Biological and green synthesis of nanomaterial is a superior choice over chemical and physical methods due to nanoscale attributes implanted in a green chemistry matrix, have sparked a lot of interest for their potential uses in a variety of sectors. This research investigates the growing relevance of nanocomposites manufactured using ecologically friendly, green technologies. The transition to green synthesis correlates with the worldwide drive for environmentally sound procedures, limiting the use of traditional harsh synthetic techniques. Herein, manganese was decorated on ZnO NPs via reducing agent of Withania-extract and confirmed by UV-spectrophotometry with highest peak at 1:2 ratio precursors, and having lower bandgap energy (3.3 eV). XRD showed the sharp peaks and confirms the formation of nanoparticles, having particle size in range of 11-14 nm. SEM confirmed amorphous tetragonal structure while EDX spectroscopy showed the presence of Zn and Mn in all composition. Green synthesized Mn-decorated ZnO-NPs screened against bacterial strains and exhibited excellent antimicrobial activities against gram-negative and gram-positive bacteria. To check further, applicability of synthesized Mn-decorated Zn nanocomposites, their photocatalytic activity against toxic water pollutants (methylene blue (MB) dye) were also investigated and results showed that 53.8% degradation of MB was done successfully. Furthermore, the installation of green chemistry in synthesizing nanocomposites by using plant extract matrix optimizes antibacterial characteristics, antioxidant and biodegradability, helping to build sustainable green Mn decorated ZnO nanomaterial. This work, explains how biologically friendly Mn-doped ZnO nanocomposites can help reduce the environmental impact of traditional packaging materials. Based on these findings, it was determined that nanocomposites derived from biological resources should be produced on a wide scale to eradicate environmental and water contaminants through degradation.

Phyto-fabricated ZnO nanoparticles for anticancer, photo-antimicrobial effect on carbapenem-resistant/sensitive Pseudomonas aeruginosa and removal of tetracycline

Alternanthera sessilis (AS) leaf extract was used to synthesize zinc oxide nanoparticles (ZnO NPs). Bioanalytical characterization techniques such as X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) confirmed the formation of crystalline ZnO NPs with average sizes of 40 nm. The AS-ZnO NPs antimicrobial activity was analyzed under dark (D) and white light (WL) conditions. The improved antimicrobial activity was observed against Escherichia coli, Staphylococcus aureus and Bacillus subtilis at the minimal inhibitory concentration (MIC) of 125 and 62.5 µg/mL under WL than the D at 125 and 250 µg/mL for E. coli, B. subtilis, and Pseudomonas aeruginosa, respectively. In contrast, the growth of P. aeruginosa and S. aureus was not completely inhibited until 1 mg/mL AS-ZnO NPs under WL and D. Similarly, AS-ZnO NPs displayed a weaker inhibitory effect against carbapenem-sensitive P. aeruginosa (CSPA) and carbapenem-resistant P. aeruginosa (CRPA) strains of PAC023, PAC041 and PAC032, PAC045 under D. Interestingly, the distinct inhibitory effect was recorded against CSPA PAC041 and CRPA PAC032 in which the bacteria growth was inhibited 99.9% at 250, 500 µg/mL under WL. The cytotoxicity results suggested AS-ZnO NPs demonstrated higher toxicity to MCF-7 breast cancer cells than the RAW264.7 macrophage cells. Further, AS-ZnO NPs exhibited higher catalytic potential against tetracycline hydrochloride (TC-H) degradation at 65.6% and 60.8% under WL than the dark at 59.35% and 48.6% within 120 min. Therefore, AS-ZnO NPs can be used to design a photo-improved antimicrobial formulation and environmental catalyst for removing TC-H from wastewater.

Research progress, trends, and updates on pollutants removal by Bi2WO6-based photocatalysts under visible light irradiation

In recent years, extensive research has been conducted on bismuth tungstate (Bi2WO6) in the field of photocatalysis owing to its unique crystal structure and favorable bandgap. This study offers a comprehensive review of the research on Bi2WO6-based photocatalysts from 2007 to 2022 using bibliometric analysis. The analysis utilized the Web of Science Core Collection Database and encompassed a dataset of 2064 publications. The bibliometric analysis and science mapping were carried out using the bibliometix R-package and CiteSpace software. This analysis examined and discussed the network of relationships among countries, journals, organizations, authors, and keywords pertaining to the topic and subtopics under investigation. The findings demonstrate that China has played a significant role in this research area and has formed close collaborations with other countries. The identification of highly-cited emerging terms suggests that enhancing the photocatalytic performance of Bi2WO6-based nanomaterials is a primary research focus. Moreover, there has been increasing interest in exploring the synergistic effects of photocatalysis and adsorption as a means to improve catalytic efficiency. This study provides valuable insights for researchers seeking a deeper understanding of Bi2WO6-based photocatalysts.

Carbon quantum dots assisted BiFeO3@BiOBr S-scheme heterojunction enhanced peroxymonosulfate activation for the photocatalytic degradation of imidacloprid under visible light: Performance, mechanism and biotoxicity

A novel S-scheme heterojunction photocatalyst carbon quantum dots (CQDs)/BiFeO3/BiOBr (CBB) was synthesized via a facile hydrothermal method, which was highly effective in activating peroxymonosulfate (PMS) to photodegrade imidacloprid (IMD) (one of the typical neonicotinoid insecticides (NEOs)) under visible light irradiation. Based on the physicochemical and photoelectrochemical analysis, the super photocatalytic performance of the CBB photocatalyst was contributed to the enhanced separation and transfer of photogenerated electrons (e-) and holes (h+), the activation of PMS by reactive species, and the wider light absorption range induced by CQDs. Moreover, the intermediate products and possible photodegradation pathways of IMD were confirmed through high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS) detection and density functional theory (DFT) calculations. Although the photodegradation of IMD in the CBB/PMS/Vis system can be affected by the water quality parameters (i.e., acid group anions, pH, and the presence of humic acid (HA)), the synthesized CBB photocatalyst showed excellent photocatalytic performance in multiple natural water samples. This study provides a new idea to construct an effective and efficient heterojunction photocatalyst, which may have great advantages in photocatalytic degradation of NEOs and possibly other emerging contaminants in the aquatic environment.

Revealing the synergistic effect between radical and non-radical species of sulfur-doped carbon nitride for ciprofloxacin removal: Based on density functional theory study

The distinct characteristics of active species produced during the photocatalytic reaction can result in alterations in the degradation routes of organic pollutants with diverse chemical structures. The relationship between the active species and degradation pathways of organic pollutants lacks a direct experimental or characterization method, so in-depth research is still needed to understand the details of their interactions. In this study, sulfur-doped bulk carbon nitride (SBCN) was prepared based on bulk carbon nitride (BCN), and the process of S-doping enhancing the production of O21 was revealed. Through the degradation experiment, the degradation rate of CIP by SBCN reached 91 %, which was higher than that of BCN (66 %). The increase of degradation rate was mainly attributed to the increase of O21. Through the density functional theory (DFT) calculation of CIP and its degradation intermediate, due to the preferential oxidation of CIP by O21, O21 changes the initial degradation direction of CIP, releasing more attack sites for ˙O2-, thereby achieving more efficient degradation of CIP through the synergy of O21 and ˙O2-. In this study, the attack preferences of the active species and their synergistic promotion provide important insights for the efficient photocatalytic degradation of organic pollutants.

g-C3N4 modified with non-precious metal Al with LSPR as an efficient visible light catalyst

The issue of water pollution has emerged as a formidable challenge, prompting a pressing need for solutions. The utilization of metal nanoparticles with surface plasmon resonance and semiconductor composite photocatalysts is regarded as a highly effective approach to solve this problem. g-C3N4 is an effective catalyst for the degradation of organic pollutants. Its photocatalytic performance is usually enhanced by the use of the noble metal Au Ag. However, the high cost of these materials limits their application. In this study, we present the synthesis of Al NPs/g-C3N4 nanocomposites using the bridging effect of ligands. The characterized of transmission electron microscopy (TEM), X-ray diffractometer (XRD) and ultraviolet-visible spectroscopy (UV-Vis) proved that Al NPs/g-C3N4 with a wider light absorption range were successfully synthesized. The effects of ligands, (glutathione (GSH), glutamic acid (GAG), and cysteine (CYS)), Al diameter (40 to 200 nm) and the ratio of Al to g-C3N4 (1:1 to 5:1) on the photocatalytic degradation of methylene blue (MB) by Al NPs/g-C3N4 were also evaluated. The results showed that the optimum degradation efficiency of Al NPs/g-C3N4 for MB at 5 mg/L reached 100% within 60 min, which was 11 times higher than that of pure g-C3N4. The principal analysis of Al enhancing the photocatalytic performance of g-C3N4 was studied through transient photocurrent spectroscopy (TPC), electrochemical impedance spectroscopy (EIS), and steady-state transient fluorescence spectroscopy (PL). The results confirmed that hot carriers generated by localized surface plasmon resonance (LSPR) of Al nanoparticles increase the carrier concentration. In addition, the Schottky barrier generated by Al and g-C3N4 could also improve the carrier separation rate and increase the carrier lifetime. This work is expected to solve the problem of organic wastewater treatment and lay the foundation for subsequent research on photocatalysis.

Sulfur vacancy-enhanced In2S3-x hollow microtubes for photocatalytic Cr (VI) and tetracycline removal

Morphological regulation and defect engineering are efficient methods for photocatalytic technology by improving photon absorption and electron dissociation. Herein, In2S3-x hollow microtubes with S-vacancies (MIS) were fabricated via a simple solvothermal reaction using In-based metal-organic frameworks (In-MOFs) as a precursor. Experimental results demonstrate that the hollow structure and optimal S-vacancies can jointly accelerate the photocatalytic reaction, attributed to a larger specific surface area, more active sites, and faster electron transfer efficiency. The champion MIS(2) displayed significantly better photocatalytic activity for Cr(VI) reduction and tetracycline (TC) degradation. The Cr(VI) reduction rate by MIS(2) is 3.67 and 2.82 times higher than those of optimal In2S3 template-free (HIS(2)) and MIS(1) with poor S-vacancies, respectively. The removal efficiency of TC by MIS(2) is 1.37 and 1.15 times higher than those of HIS(2) and MIS(1). Further integration of MIS(2) with aerogel simplifies the recovery process significantly.

Investigations on Chemically Synthesized Pure and Doped Manganese Dioxide Nanoparticles for Dye Removal and Photocatalytic Applications

Pure and Mg2+, Ni2+, Cd2+ doped MnO2 nanoparticles were synthesized by chemical co-precipitation method. These samples were characterised by PXRD, SEM, EDX, FTIR, UV-Vis-NIR, PL, Antibacterial, Cyclic Voltammetry, Dye Degradation and Photocatalytic studies. From the powder XRD studies, the crystallite size of the particle was calculated using Scherer formula and found that the synthesized nanoparticles were in the range from 10 to 12 nm. The morphology of all the synthesized samples was viewed from SEM micrograph. The composition and purity of the samples were identified from EDX studies. In FTIR spectra metal-oxygen stretching and bending modes of vibrations were observed. From the absorption spectra of UV-Vis optical analysis values of absorption coefficient, extinction coefficient, refractive index, real and imaginary part of optical dielectric constant and optical conductivity were compared. The band gap energy obtained from Tauc's plot varies from 1.21 to 1.51 eV exhibits semiconducting behaviour of all the synthesized samples. Investigations on photoluminecsence spectrum reveals blue shift in wavelength for doped nanooxides compared to pure MnO2. Antimicrobial activity of synthesised samples against gram positive and gram negative bacteria was determined. The obtained results reveal very high bacterial resistance in Cd2+ doped MnO2 nanoparticles with higher activity towards bacterial resistance compared to standard drug. The specific capacitance values were determined from Cyclic Voltammetry studies. Using the batch method of dye removing technique the percentage of malachite green dye removal was calculated. Also the photocatalytic efficiency of all the synthesized MnO2 samples in removing malachite green dye was studied by exposing to sunlight for different dosage and contact time. Ni2+ doped MnO2 shows relatively higher % of dye degradation capacity about 93% for 0.1 g of dosage of photocatalysts.

The effects of antimicrobial photocatalytic nanoparticles on the flexural strength of orthodontic acrylic resins: A systematic review and meta-analysis

BACKGROUND/PURPOSE

Orthodontic acrylic resins containing antimicrobial photocatalytic nanoparticles aims to reduce oral lesions including denture stomatitis and white spot lesions but they should not imperil its mechanical properties. This systematic review was done to evaluate the effect of various photocatalytic nanoparticles on the flexural strength (FS) of acrylic resins.

MATERIALS AND METHODS

We systematically searched the PubMed/Medline, Cochrane Library, and Scopus databases from January 2018 to October 2023. The review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and the quality of the studies was evaluated using the QUIN tool, which is specifically designed to assess the risk of bias in vitro studies.

RESULTS

Following screening of 1016 initial records, 23 studies were deemed eligible for inclusion. The addition of photocatalytic nanoparticles, such as emodin (Emo), curcumin (Cur), Cur nisin (CurNis), zeolite/zinc oxide (Zeo/ZnO), and Ulva lactuca (U. lactuca), to acrylic resins resulted in a reduction in FS, with the extent of reduction dependent on the nanoparticle concentration. Specifically, the addition of Emo (≥0.5 %), Cur (≥0.5 %), CurNis (≥5 %), Zeo/ZnO (≥2), and U. lactuca (≥1 %) to acrylic resins significantly decreased FS. Conversely, the inclusion of ZnO and titanium dioxide (TiO2) in acrylic resins improved FS, but higher concentrations (≥5 % for TiO2) had a limited positive effect.

CONCLUSION

Our study supports the use of low concentrations of photocatalytic nanoparticles, such as ZnO (≤2 %), TiO2 (≤3 %), Emo (≤0.5 %), Cur (≤0.5 %), CurNis (≤5 %), and U. lactuca (≤1 %), in orthodontic acrylic resins without compromising FS.

Copper-doped bismuth oxychloride nanosheets assembled into sphere-like morphology for improved photocatalytic inactivation of drug-resistant bacteria

The devastating microbiological contamination as well as emerging drug-resistant bacteria has posed severe threats to the ecosystem and public health, which propels the continuous exploitation of safe yet efficient disinfection products and technology. Here, copper doping engineered bismuth oxychloride (Cu-BiOCl) nanocomposite with a hierarchical spherical structure was successfully prepared. It was found that due to the exposure of abundant active sites for the adsorption of both bacteria cells and molecular oxygen in the structure, the obtained Cu-BiOCl with nanosheets assembled into sphere-like morphology exhibited remarkable photocatalytic antibacterial effects. In particular, compared to the pure BiOCl, composite Cu-BiOCl possessed improved antibacterial effects against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Methicillin-resistant Staphylococcus aureus (MRSA). The combination of physicochemical characterizations and theoretical calculations has revealed that copper doping significantly promoted the light absorbance, inhibited the recombination of electron-hole pairs, and enhanced molecular oxygen adsorption, which resulted in more generation of active species including reactive oxygen species (ROS) and h+ to achieve superior photocatalytic bacterial inactivation. Finally, transcriptome analysis on MRSA pinpointed photocatalytic inactivation induced by Cu-BiOCl may retard largely the development of drug-resistance. Therefore, the built spherical Cu-BiOCl nanocomposite has provided an ecofriendly, economical and robust strategy for the efficient removal of drug-resistant bacteria with promising potentials for environmental and healthcare utilizations.

Visible-Light-Responsive Polyoxometalate@Metal-Organic Frameworks Involving Ir Metalloligands for Highly Selective Photocatalytic Oxidation of Sulfides to Sulfoxide

The synthesis of highly efficient visible-light-responsive photocatalysts is fundamental to solving the problems of low efficiency and poor selectivity in photocatalytic organic synthesis reactions. We synthesized a crystalline polyoxometalate @metal-organic framework material {Zn4 (H2 O)8 [Ir(ppy)2 (dcbpy)]4 [SiW12 O40 ]} ⋅ 4H2 O (Ir-SiW) by self-assembly of Ir metalloligands with POMs. The introduction of Ir metalloligands extends the light absorbing range to visible light, improving the efficient utilization of solar energy. The transfer of photogenerated electrons from Ir metalloligands to SiW12 was observed under visible light irradiation, which boosted the carrier separation efficiency. The synergistic effect of the two components increased the photocatalytic thioether oxidation activity, and the product methyl phenyl sulfoxide for 2.5 h under visible light irradiation (λ >400 nm) reached 99.5 %, which was higher than those of other POM-based photocatalysts. Meanwhile, the yield of methyl phenyl sulfoxide was still higher than 97 % after three cycles, demonstrating the high stability and reusability of Ir-SiW.

Amino-grafted Biochar as a Novel Photocatalyst for degradation of high concentration dye

Photocatalytic degradation of organic pollution by biochar was a sustainable strategy for waste water remediation, nevertheless, it still suffers drawbacks like low efficiency due to the poor photocatalytic properties of pristine biochar. Herein, amino groups were grafted on the edge sites/defects of biochar by Friedel-Crafts acylation to enhance the degradation of high concentration dye solutions. The results suggested that the amino groups played an important role in imparting photocatalytic properties to biochar. Owing to the strong Lewis basicity and electron-donating ability of amino groups, their interaction with oxygen-containing functional groups/aromatic structures in biochar was improved, which enhanced the electron exchange ability of biochar under visible light irradiation, resulting in excellent degradation performances of high concentration RhB (∼10 times faster than ungrafted biochar). In this work, amino-grafted garlic peel biochar delivered a new idea for the future direction of biochar-based photocatalysis in wastewater remediation.

Insight into the effect of microplastics on photocatalytic degradation tetracycline by a dissolvable semiconductor-organic framework

The presence of microplastics (MPs) in large quantities in the aqueous environment significantly affects the degradation process of water pollution. Still, the interaction between MPs and pollutants during photocatalytic degradation has not been studied. Here, a soluble BiOCl-OH semiconductor-organic framework (BOCH-SOF) was prepared from xylitol, and the polystyrene (PS) MPs' effect on the photocatalytic degradation of tetracycline (TC) was investigated. It was found that the appropriate number of PS can promote TC degradation and also change degradation products and pathways. At the same time, the presence of TC can effectively enhance PS aging and reduce the molecular weight of PS. This indicates that BOCH-SOF produces a synergistic effect in treating the combined pollution of TC and PS. Through free radical analysis and density functional theory calculations, it was proposed that PS and TC can complement each other. A certain concentration and size of PS can promote the conversion of Bi(III) to Bi and enhance charge separation and radical generation; the TC can change the interfacial charge distribution and free radical depletion, extend the light absorption in the system, and the PS and TC work together to ultimately achieve the synergistic degradation of the TC and the aging PS. This paper provides an in-depth analysis of the mechanism of the effect of MPs on the photocatalytic degradation of antibiotics, which is significant in controlling the combined pollution of MPs and associated pollutants in the water environment.

Remarkably fast and reusable photocatalysis by UV annealed Cu2O-SnO2 p-n heterojunction

Powdered micro- or nano-particles photocatalyst has separation and recovery challenges, which may create a second pollution to environment and harmful to animals. To address those issues, SnO2, Cu2O and Cu2O-SnO2 p-n heterojunction thin films are formed on glass substrates using efficient co-sputtering method that is commonly employed for large-area high-definition display panel. Using first-order kinetics, 100 °C ultraviolet (UV) annealed Cu2O-SnO2 p-n heterojunction shows the superb fast degradation rate constant of 0.21 and 0.16 min-1 for methylene blue (MB) and methyl orange (MO) organic dyes, respectively, as photogenerated electron-hole pairs is increased. Record best degradation rate constants of 0.19 and 0.11 min-1 for respective MB and MO are still achieved even after four repeated cycles. The 100 °C UV annealed Cu2O-SnO2 film catalyst displays greater degradation efficiency in both dyes, reaching 100% degradation at room temperature after 30 and 35 min of illumination for MB and MO respectively. The scavenger experiments show that hydroxyl (·OH) and superoxide radicals (·O2-) are the major active species in the degradation of dye. The 100 °C UV annealed Cu2O-SnO2 film catalyst showed stability as well as reusability towards the dye degradation. As a result, the present work delivers an effective way to enhance the photocatalytic performance and also an easy recovery of the catalyst, which can be explored for various emerging pollutants.

Sustainable, efficient, and synergistic photocatalytic degradation toward organic dyes and formaldehyde gas via Cu2O NPs@wood

Cuprous oxide (Cu2O) nanoparticles (NPs) was anchored on wood by simple spraying method, then both soft and hard wood has been endowed efficient function photocatalytic degradation toward organic dyes and formaldehyde gas synergistically. The best recycle ability of wood based photocatalyst toward organic pollutants was achieved, which was characterized by photocatalytic degradation efficiency of methylene blue (MB) more than 95% after 100 cycles, and formaldehyde gas over 85% after 60 cycles. Cu2O NPs@wood performed much lower forbidden bandwidth (Eg), which accelerated to generate much more radical of e- and finally promoted the capacity of photocatalytic degradation. The proposed Cu2O NPs@wood catalysts has potential to be applied both in the field of wastewater and air pollution remediation.

Enhanced photocatalytic degradation of tetracycline using NiCo-BiVO4 nanocomposite under visible light irradiation: A noble-metal-free approach for water remediation

The increasing pollution of water bodies with organic contaminants, including antibiotics, has become a significant environmental concern. In this study, a noble-metal-free alternative, NiCo bimetal cocatalyst, was synthesized and applied to enhance the photocatalytic degradation of the antibiotic tetracycline (TC) using BiVO4 as the photocatalyst under the visible spectrum. The NiCo-BiVO4 nanocomposite exhibited improved visible light absorption, reduced recombination rate of charge carriers, and enhanced electrochemical properties. The photocatalytic degradation of TC was significantly enhanced by the NiCo bimetal modification, with the 2 wt% NiCo-BiVO4 nanocomposite achieving an 87.2% degradation of TC and 82% Total Organic Carbon (TOC) removal within 120 min. The degradation kinetics of TC (target compound) followed a first-order reaction, with photogenerated electrons and holes identified as the primary active species responsible for the degradation process. The recyclability of the catalyst was also demonstrated for multiple runs, indicating its stability. Furthermore, the pathway of TC degradation by 2 wt% NiCo-BiVO4 nanocomposite was proposed based on the detected intermediate products using LC-MS analysis. This study provides a promising approach for developing efficient, noble-metal-free photocatalysts to remove organic contaminants from water sources.

Enhanced carbon dioxide adsorption and carrier separation over amine functionalized zirconium metal organic framework/gold/indium oxide for boosting photocatalytic carbon dioxide reduction

Photocatalytic CO2 conversion is a prospective way to mitigate greenhouse effect. In2O3 is widely used in the resource conversion of CO2, but still exists a few drawbacks containing limited CO2 capture and activation, narrow light absorption range, low charge separation and utilization. To overcome these disadvantages, an NH2-UiO-66/Au/In2O3 composite photocatalyst is built, with Au nanoparticles and NH2-UiO-66 decorated on the surface of In2O3 nanorods. Significantly, the improved carrier separation ability is attributed to the Schottky junction at the Au/In2O3 interface and the heterostructure between In2O3 and NH2-UiO-66. And the widened light absorption is attributed to the plasmon effect caused by Au nanoparticles. Moreover, the increase of CO2 adsorption and activation is mainly due to the porosity of NH2-UiO-66, thereby greatly improving photocatalytic CO2RR efficiency of NH2-UiO-66/Au/In2O3 nanorods. The CO yield of NH2-UiO-66/Au/In2O3 is 8.56 μmol g-1 h-1, which is nearly 45 times that of In2O3. This work will present a novel idea to design high-efficient composite photocatalysts for CO2 reduction by multifunctional component synergistic enhancement.

In-situ grown carbon as charge transfer medium for enhanced photoinduced electrons extraction from polymer carbon nitride toward TiO2

Interfacial charge transfer resistance is one of the main limiting factors for realizing high photocatalytic efficiency of heterostructures system. Herein, an activated carbon layer is successfully introduced between the interface of polymer carbon nitride (CN) and TiO2 heterostructure (CNP-x) as charge transfer medium by in situ pyrolysis carbonization method. Because of the lower spatial resistance of the crystalline/amorphous interface and the fast carrier transportation character of activated carbon, the efficiency of TiO2 in extracting photoinduced electrons from CN was significantly improved. That is, the separation/transport of photocarriers in CNP-x heterostructure is accelerated, and the recombination time of photogenerated electrons and holes is prolonged. The CNP-1 exhibits a H2 evolution rate of 1298.5 μmol h-1 with apparent quantum yield (AQY) of 34.5 %, 20.3 % and 12.6 % at 365 nm, 380 nm and 400 nm, respectively. This work offers a novel and unique strategy to promote interface charge separation and transport of CN-based heterostructures by accurately introduction charge transfer medium.

A comprehensive review on the application of semiconducting materials in the degradation of effluents and water splitting

In this comprehensive review article, we delve into the critical intersection of environmental science and materials science. The introduction sets the stage by emphasizing the global water shortage crisis and the dire consequences of untreated effluents on ecosystems and human health. As we progress into the second section, we embark on an intricate exploration of piezoelectric and photocatalytic principles, illuminating their significance in wastewater treatment and sustainable energy production. The heart of our review is dedicated to a detailed analysis of the detrimental impacts of effluents on human health, underscoring the urgency of effective treatment methods. We dissected three key materials in the realm of piezo-photocatalysis: ZnO-based materials, BaTiO3-based materials, and bismuth-doped materials. Each material is scrutinized for its unique properties and applications in the removal of pollutants from wastewater, offering a comprehensive understanding of their potential to address this critical issue. Furthermore, our exploration extends to the realm of hydrogen production, where we discuss various types of hydrogen and the role of piezo-photocatalysis in generating clean and sustainable hydrogen. By illuminating the synergistic potential of these advanced materials and technologies, we pave the way for innovative solutions to the pressing challenges of water pollution and renewable energy production. This review article not only serves as a valuable resource for researchers and scholars in the fields of material science and environmental engineering but also underscores the pivotal role of interdisciplinary approaches in addressing complex global issues.

Simultaneous preparation of ZnO/rGO composites through Zn(OH)2 decomposition and graphite oxide reduction and their photocatalytic properties

ZnO/reduced graphite oxide (rGO) composites were simultaneously prepared by the thermal reduction of graphite oxide (GO) and the decomposition of Zn(OH)2. The samples were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, photoluminescence, and DRS. Results indicate that Zn(OH)2 was heated and decomposed into ZnO at a low temperature (200 ℃), while GO was reduced to graphene. The synthesized ZnO particles were small and loaded on graphene layers. The ZnO/rGO photocatalysts exhibited excellent photocatalytic activity against methylene blue (MB) under simulated sunlight irradiation. The ZnO/50% rGO photocatalyst showed the best MB photodegradation rate of up to 99.7% within 3 min. Synchronous reaction provided an efficient, simple, and fast preparation method for ZnO/rGO composites, with an excellent solar photocatalytic degradation ability.

Plasmonic coupling-boosted photothermal nanoreactor for efficient solar light-driven photocatalytic water splitting

Photothermal nanoreactor with rapid charge transfer and improved spectral utilization is a key point in photocatalysis research. Herein, silver sulfide quantum dots (Ag2S QDs) were coating on the surface of porous graphitic carbon nitride nano vesicles (PCNNVs) to form Ag2S/PCNNVs nanoreactors by a simple calcination method for obtaining efficient photothermal-assisted photocatalytic hydrogen (H2) evolution under simulated/real sunlight irradiation. In particularly, the as-prepared optimal 3% Ag2S/PCNNVs sample exhibited the H2 production rate of 34.8 mmol h-1 g-1, which was 3.5 times higher than that of bare PCNNVs. The enhancement of photothermal-assisted activity over the Ag2S/PCNNVs composite system is mainly attributed to the coupling of the photothermal conversion performance of Ag2S QDs and the thermal insulation performance of PCNNVs based on the plasmonic coupling-boosted photothermal nanoreactor. This study presents a promising strategy for the development of high-efficient photothermal-assisted photocatalysts.

Photocatalytic Reduction of CO2 to HCOOH and CO by a Phosphine-Bipyridine-Phosphine Ir(III) Catalyst: Photophysics, Nonadiabatic Effects, Mechanism, and Selectivity

Photocatalytic CO2 reduction is one of the best solutions to solve the global energy crisis and to realize carbon neutralization. The tetradentate phosphine-bipyridine (bpy)-phosphine (PNNP)-type Ir(III) photocatalyst, Mes-IrPCY2, was reported with a high HCOOH selectivity but the photocatalytic mechanism remains elusive. Herein, we employ electronic structure methods in combination with radiative, nonradiative, and electron transfer rate calculations, to explore the entire photocatalytic cycle to either HCOOH or CO, based on which a new mechanistic scenario is proposed. The catalytic reduction reaction starts from the generation of the precursor metal-to-ligand charge transfer (3 MLCT) state. Subsequently, the divergence happens from the 3 MLCT state, the single electron transfer (SET) and deprotonation process lead to the formation of one-electron-reduced species and Ir(I) species, which initiate the reduction reaction to HCOOH and CO, respectively. Interestingly, the efficient occurrence of proton or electron transfer reduces barriers of critical steps. In addition, nonadiabatic transitions play a nonnegligible role in the cycle. We suggest a lower free-energy barrier in the reaction-limiting step and the very efficient SET in 3 MLCT are cooperatively responsible for a high HCOOH selectivity. The gained mechanistic insights could help chemists to understand, regulate, and design photocatalytic CO2 reduction reaction of similar function-integrated molecular photocatalyst.

Facile In-Situ photocatalytic reduction of AuNPs on multilayer Core-Shell Fe3O4@SiO2@PDA magnetic nanostructures and their SERS application

Surface-enhanced Raman scattering (SERS) is a promising analytical technique for the rapid, sensitive, and repeatable detection in various SERS application fields. Herein, a new type of potential magnetically recyclable SERS substrate was designed and rapidly synthesized via a facile three-step template method. First, the magnetic ferroferric oxide (Fe3O4) cores were prepared by a convenient solvothermal approach, and coated with a thin layer of silica by a sol-gel process in order to improve their stability in complicated environments. Next, the negatively charged polydopamine (PDA)/K6[SiW11VIVO40]·7H2O (PDA/SiW11V) outer shell was assembled upon the magnetic Fe3O4@SiO2 core-shell nanoparticles via a layer-by-layer sequential adsorption process using the stickiness of PDA. The SiW11V multilayer shell can be used as the subsequent photocatalytic reduction precursors for the in-situ loading of high-density gold nanoparticles (AuNPs), without any other organic additives. The AuNPs decorated multilayer core-shell Fe3O4@SiO2@PDA magnetic nanostructures were employed as a potential magnetically recyclable SERS substrate, and showed excellent SERS performance. Using crystal violet (CV) as a model target, the as-fabricated AuNPs modified multilayer core-shell Fe3O4@SiO2@PDA magnetic nanostructures SERS substrates exhibited significant enhancement, and pushed the detection limit down to 10-12 M. Aside from the ultrahigh sensitivity, these SERS substrates also possess an excellent reproducibility (relative standard deviation (RSD) ∼ 8.3%), long-term stability (75 days), and unique chemical stability capability in different organic solvents and different environments with pH ≤ 10. Furthermore, a real-life application is also performed by the detection of melamine in spiked milk solution using the as-prepared magnetic nanostructures SERS-active substrates (limit of detection (LOD), 10-8 M). These results highlight that the rational design and controllable synthesis of multifunctional magnetic SERS substrates is a promising strategy in many different application fields such as biosensing, photoelectrocatalysis, and medical diagnosis.

Understanding the effective breakdown of PAH s in water through the use of g-C3N4-Ag-Cu-Ni nanocomposites

The research work aimed to explore the suitability of using a novel g- C3N4-Ag-Cu-Ni nanocomposite for the simultaneous degradation of pyrene in wastewater. The outcome revealed that the g- C3N4 phase was successfully fabricated on the g-C3N4-based compound, and the existence of the g- C3N4-based compound beneficially stabilized the Ag-Cu-Ni particles. The g- C3N4-Ag-Cu-Ni nanocomposite demonstrated excellent performance in pyrene degradation under various conditions. The degradation of pyrene increased with a rise in the dosage of g- C3N4-Ag-Cu-Ni. These findings indicate that the g- C3N4-Ag-Cu-Ni nanocomposite could be a promising material for water purification, especially for the simultaneous photocatalytic and antimicrobial treatment of contaminated water bodies. The study provides a helpful guide for future research in this field.

Synergistic defect and doping engineering building strong bonded S-scheme heterojunction for photocatalysis

Photocatalytic degradation of pollutants is considered a promising approach for wastewater treatment, but is hampered by low efficiency and limited understanding of degradation pathways. A novel oxygen-doped porous g-C3N4/oxygen vacancies-rich BiOCl (OCN/OVBOC) heterostructure was prepared for photocatalytic degradation of bisphenol A (BPA). The synergistic defect and doping engineering favor the formation of strong bonded interface for S-scheme mechanism. Among them, 0.3 OCN/OVBOC showed the most excellent degradation rate, which was 8 times and 4 times higher than that of pure g-C3N4 and BiOCl, respectively. This excellent performance is mainly attributed to the significantly enhanced charge separation via strong bonded interface and redox capability of the S-scheme heterojunction structure, by tuning the coordination excitation and electron localization of the catalyst via O doping and vacancies. This work provides important insights into the role of synergistic defect and doping engineering in facilitating the formation of strong bonded S-scheme heterojunction and ultimately sheds new light on the design of efficient photocatalysts.

Ultrasonic processing of WO3 nanosheets integrated Ti3C2 MXene 2D-2D based heterojunctions with synergistic effects for enhanced water splitting and environmental remediation

This article describes a straightforward chemical procedure that involves hydrothermal and ultrasonic treatments to create a new 2D/2D ultrathin WO3/Ti3C2 heterojunctions. The features of the fabricated heterojunctions were characterized and examined by field emission electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), optical absorption spectroscopy (UV-Vis). By photodegrading an organic dye under the influence of visible light, the photocatalytic degradation capabilities of the heterojunctions were also investigated. The performance of WO3/Ti3C2 was superior to that of bare WO3, with a removal rate of 94% and a kinetic rate constant (k) that was approximately 3 times that of WO3. The creation of 2D/2D heterojunction was observed to encourage the spatial charge separation and increase the surface reactive sites, to result with the increased photocatalytic activity in WO3/Ti3C2 heterojunction. The photocurrent values discovered through photoelectrochemical studies further indicated Ti3C2's active function in enhancing water-splitting performance. The impedance analysis examined by an electrochemical method revealed that heterojunctions might be helpful in accelerating the migration of charges quickly to get the outcomes seen.

Piezo-photocatalysis for efficient charge separation to promote CO2 photoreduction in nanoclusters

The substantial emissions of CO2 greenhouse gases have resulted in severe environmental problems, and research on the implementation of semiconductor materials to minimize CO2 is currently a highly discussed subject. Effective separation of interface charges is a major challenge for efficient piezo-photocatalytic systems. Meanwhile, the ultrasmall-sized metal nanoclusters can shorten the distance of electron transport. Herein, we synthesized Au25(p-MBA)18 nanoclusters (Au25 NCs) modified red graphitic carbon nitride (RCN) nanocatalysts with highly exposed Au active sites by in-situ seed growth method. The loading of Au25 NCs on the RCN surface provides more active sites and creates a long-range ordered electric field. It allows for the direct utilization of the piezoelectric field to separate photogenerated carriers during photo-piezoelectric excitation. Based on the above advantages, the rate of CO2 reduction to CO over Au25 NCs/RCN (111.95 μmol g-1 h-1) was more than triple compared to that of pristine RCN. This paper has positive implication for further application of metal clusters loaded semiconductor for piezo-photocatalytic CO2 reduction.

Enhanced photocatalytic activity of tin oxide-doped molybdenum disulfide nanohybrids under visible light irradiation: Antibiotics elimination, heavy metal reduction and antibacterial behavior

Nano-heterojunction photocatalytic can operate removal of pollutants, which is basic for the sustainable development of a clean environment. Herein, we propose a novel MoS2/SnO2 (MS) S-scheme heterojunction by a facile hydrothermal process, which is cheap, easily available, highly visible-light response, and good stability. The MS nano-heterojunction suggested superior performance with the photocatalytic degradation of 97.6% within 100 min for ciprofloxacin (CIP) removal, which was 5.74 and 4.88 folds higher than that of pristine MoS2 and SnO2, respectively. The fabricated MS photocatalysts displayed outstanding photocatalytic efficiency toward Cr (VI) reduction. The removal capability of Cr (VI) reached up to 92.5% within 60 min. The photodegradation efficiency was 5.2 folds that of pristine MoS2. In addition, the antibacterial performance approximately approached 100% for E. coli within 10 min, which was more apparent than the others. A series of excellent results implied that MS nano-heterojunction had a high ultraviolet and visible light absorbance, larger specific surface area, outstanding electron-hole pairs migration and higher capability of photo-response electrons and holes separation rate. This system offers a novel window into the evolution of nano-heterojunction for wastewater treatment and solar energy harvesting applications.

Green synthesis of rectangular hollow tubular carbon nitride via in-situ self-assembly strategy to enhance the degradation of tetracycline hydrochloride under visible light irradiation

It has been an urgent requirement for materials with remarkable performance in the photocatalytic degradation of organic contaminants by photocatalytic technology. Limited surface area and speedy recombination rate of photogenerated charge carriers seriously restrain the application of g-C3N4. Morphology control is a powerful approach to enhance the photocatalytic efficiency of g-C3N4. Herein, we reported a method to attain graphitic carbon nitride with rectangular hollow tubular morphology and asperous surface (TUM-CN-2) which is prepared from urea-melamine hydrothermal products and trithiocyanuric acid by self-assembling without using organic solvents or template agents. The specific surface area, photocatalytic activity, and photo-generated carriers migration and separation rate of the obtained photocatalyst TUM-CN-2 are vastly improved. Contrasted with pure g-C3N4, the degradation rate of tetracycline hydrochloride (TCH) and Rhodamine B (RhB) was enhanced about 3.04 and 13.96 times in visible light irradiation, respectively. Moreover, the interference parameters, active free radicals, potential degradation mechanism, and degradation paths of TCH were researched systematically. This work provides a green way to acquire the modified g-C3N4 with splendid catalytic activity through the self-assembly method.

Performance and applications of ZnO/pyrolusite composite particle electrode

In this research, we employed a synergistic three-dimensional (3D)-electrode technology in combination with a photocatalytic method to effectively treat wastewater containing chlorine derived from sulfonated phenolic resin (SMP). To modulate the band gap of single ZnO through semiconductor compounding, we successfully synthesized a ZnO/pyrolusite composite particle electrode on the surface of a pyrolusite particle electrode via a hydrothermal method. By incorporating MnO2 into pyrolusite, the ZnO band gap was modified, leading to a reduction in bandwidth of approximately 1.21 eV compared to pristine ZnO. Consequently, the light absorption range of the material was significantly broadened. Through the synergistic effect of photocatalysis, we achieved an impressive 96.45% removal rate of chemical oxygen demand (COD) in SMP wastewater, which effectively enhanced the photocatalytic performance of the material. Furthermore, our quenching experimental study confirmed the involvement of active chlorine species (ACl: Cl2, HClO, and ClO-), OH, h+, and O2- in the degradation process of SMP within the photocatalytic system constructed by the ZnO/pyrolusite composite particle electrode. The relative contributions were ranked as follows: ACl > h+ > ·OH > ·O2-.

Enhanced water splitting over ethylenediaminetetraacetate treated SrTiO3 photocatalysts with high crystallinity, reduced size, and surface nanostructure

The key elements that influence the properties and capabilities of particulate photocatalysts are their crystallinity, size, and surface active sites. However, simultaneously controlling these three variables remains a challenge. In this study, we present the first exploration into the use of a simple ethylenediaminetetraacetate (EDTA) etching technique to decrease the particle size and increase the surface active sites of photocatalysts while preserving their high crystallinity. By employing SrTiO3 as a model photocatalyst, we were able to create an ordered step nanostructure on the surface of sintered SrTiO3. As a result of the EDTA treatment, the particle size was reduced while the crystallinity was maintained. The separation of photogenerated electrons and holes is enhanced by the combination of reduced particle size and high crystallinity. To enhance chemical reaction activities, the organized surface nano-step structures serve as high-activity sites. As a result, when subjected to simulated light irradiation, the EDTA-treated SrTiO3 samples demonstrate improved photocatalytic performance for water splitting into H2 and O2 in a stoichiometric amount that is 3.8 times greater than that of untreated SrTiO3. Since EDTA interacts with most metals, this simple EDTA etching technique has the potential to be further developed to modify additional photocatalysts with exceptional performance for a variety of applications.

Simultaneous photothermal and photocatalytic MOF- derived C/TiO2 composites for high-efficiency solar driven purification of sewage

Solar-driven water evaporation is a promising technology of freshwater production to address the water scarcity. However, the photothermal material and the distilled water would be contaminated in the evaporation of wastewater including organic pollutants. In this work, MOF-derived C/TiO2 composites (carbonized UiO-66-NH2 (Ti)) with simultaneous photothermal and photocatalytic functions are designed for producing freshwater from sewage. With advantageous features of porous structure with large specific area, excellent sunlight absorption and super-hydrophilicity, the carbonized UiO-66-NH2 (Ti) layer exhibits high water evaporation efficiency of 94% under 1.0 sun irradiation. Meanwhile, the layer can simultaneously decompose the organic pollutants with degradation efficiency of 92.7% in the underlying water during solar-driven water evaporation. This bifunctional material will provide a new approach for solar-driven water evaporation and photocatalytic degradation of organic pollutant synergistically.

Boosting photocatalytic nitrogen reduction reaction by Jahn-Teller effect

Compared with traditional the Haber-Bosch process, photocatalytic ammonia production has attracted a considerable attention due to its advantages of low energy consumption and sustainability. In this work, we mainly study the photocatalytic nitrogen reduction reaction (NRR) on MoO3·0.55H2O and α-MoO3. Structure analysis shows that compared to α-MoO6, the [MoO6] octahedrons in MoO3·0.55H2O obviously distort (Jahn-Teller distortion), leading to the formation of Lewis acid active sites that favors the adsorption and activation of N2. X-ray photoelectron spectroscopy (XPS) further confirms the formation of more Mo5+ as Lewis acid active sites in MoO3·0.55H2O. Transient photocurrent, photoluminescence and electrochemical impedance spectra (EIS) confirmed that MoO3·0.55H2O has a higher charge separation and transfer efficiency than α-MoO3. Density functional theory (DFT) calculation further confirmed that the N2 adsorption on MoO3·0.55H2O is more favorable thermodynamically than that on α-MoO3. As a result, under visible light irradiation (λ ≥ 400 nm) for 60 min, an ammonia production rate of 88.6 μmol·gcat-1 was achieved on MoO3·0.55H2O, which is about 4.6 times higher than that on α-MoO3. In comparison to other photocatalysts, MoO3·0.55H2O exhibits an excellent photocatalytic NRR activity under visible light irradiation without using sacrificial agent. This work offers a new fundamental understanding to photocatalytic NRR from the viewpoint of crystal fine structure, which benefits designing efficient photocatalysts.

Green synthesis of Ag, Se, and Ag2Se nanoparticles by Pseudomonas aeruginosa: characterization and their biological and photocatalytic applications

Nanoparticles have drawn significant interest in a range of applications, ranging from biomedical to environmental sciences, due to their distinctive physicochemical characteristics. In this study, it was reported that simple biological production of Ag, Se, and bimetallic Ag2Se nanoparticles (NPs) with Pseudomonas aeruginosa is a promising, low-cost, and environmentally friendly method. For the first time in the scientific literature, Ag2Se nanoparticles have been generated via green bacterial biosynthesis. UV-vis spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and EDX were used to characterize the produced NPs. Biosynthesized NPs were examined for antibacterial, antibiofilm, and photocatalytic properties, and it was determined that the effects of NPs were dose dependent. The biosynthesized AgNPs, SeNPs, and Ag2Se NPs showed anti-microbial activity against Escherichia coli and Staphylococcus aureus. Minimal inhibitory concentrations (MICs) of E. coli and S. aureus were between 150 and 250 µg/mL. The NPs showed antibiofilm activity against E. coli and S. aureus at sub-MIC levels and reduced biofilm formation by at least 80% at a concentration of 200 µg/mL of each NPs. To photocatalyze the breakdown of Congo red, Ag, Se, and Ag2Se NPs were utilized, and their photocatalytic activity was tested at various concentrations and intervals. A minor decrease of photocatalytic degradation was detected throughout the NPs reuse operation (five cycles). Based on the encouraging findings, the synthesized NPs demonstrated antibacterial, antibiofilm, and photocatalytic properties, suggesting that they might be used in pharmaceutical, medical, environmental, and other applications.

CaCu3Ti4O12 nanoparticle-loaded cotton fabric for dual photocatalytic antibacterial and dye degradation applications

CaCu3Ti4O12 (CCTO) nanoparticles (NPs) were screen printed on pristine cotton fabric. The CCTO-coated fabric was characterized using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman, X-ray diffraction (XRD), x-ray photoelectron spectrometer (XPS), and field emission-scanning electron microscopy (FE-SEM). The modified fabric photocatalytic antibacterial and dye-degradation abilities were assessed. After 2 h of bacterial contact, unwashed CCTO-embedded cotton reduced E. coli and S. aureus by 95.1% and 94.3%, respectively. After 20 washing cycles, the modified fabric was able to eliminate S. aureus and E. coli by more than 85%. The cloth coated with CCTO-NPs degraded the methylene blue (MB) dye by 82% in 4 h, as opposed to the pure cotton's 11% degradation rate. The embedding of CCTO-NPs onto the cotton surface had minimal effect on fabric intrinsic properties like tensile strength, abrasion resistance, and water-vapor permeability.

Efficient photocatalytic reduction of p-nitrophenol under visible light irradiation based on Ag NPs loaded brown 2D g-C3N4 / g-C3N4 QDs nanocomposite

Recently, low-cost graphitic carbon nitride (g-C3N4) revealed high photocatalytic activities and provided solutions to environmental pollution. In this study, we synthesized brown mesoporous 2D g-C3N4 by calcination dicyandiamide with pluronic P123. This is followed by loading of Ag NPs on the prepared 2D g-C3N4 by photodeposition process. After that, a ternary composite 2% Ag/ 2D g-C3N4 / g-C3N4 QDs heterojunction photocatalyst has been successfully prepared. The prepared nanomaterials were comprehensively characterized by various analysis techniques such as XRD, UV-Vis., BET, XPS, SEM, TEM. This new system exhibited a large surface area with porous structure and a wide absorption of visible light. The results verified that Ag NPs decoration enhanced the charge separation of photo-generated carriers of g-C3N4 2D and g-C3N4 QDs, promote significant enhancement in the photocatalytic activity for reduction of p-nitrophenol with a rate constant (k) value of 0.49729 / min in 6 min. This rate is about two-fold higher than that observed for pure g-C3N4 2D and g-C3N4 QDs as well as shows an improvement compared to 2% Ag/ g-C3N4 2D and g-C3N4 2D/ g-C3N4 QDs. The results open the door to design highly efficient 2D/0D nanocomposite photocatalysts for a wide variety of environmental applications.

Efficient removal of copper and silver ions in electroplating wastewater by magnetic-MOF-based hydrogel and a reuse case for photocatalytic application

Direct discharge of electroplating wastewater containing hazardous metal ions such as Cu2+ and Ag + results in environmental pollution. In this study, we rationally prepare a magnetic composite hydrogel consisted of Fe3O4, UiO-66-NH2, chitosan (CTS) and polyethyleneimine (PEI), namely Fe3O4@UiO-66-NH2/CTS-PEI. Thanks to the strong attraction between the amino group and metal cations, the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel shows the maximum adsorption capacities of 321.67 mg g-1 for Cu2+ ions and 226.88 mg g-1 for Ag + ions within 120 min. As real scenario, the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel exhibits excellent removal efficiencies for metallic ions even in the complicated media of actual electroplating wastewater. In addition, we explore the competitive adsorption order of metal cations by using experimental characterization and theoretical calculations. The optimal configuration of CTS-PEI is also discovered with the density functional theory, and the water retention within hydrogel is simulated through molecular dynamics modeling. We find that the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel could be reused and after 5 cycles of adsorption-desorption, removal efficiency could maintain 80%. Finally, the Ag+ accumulated by hydrogel are reduced to generate a photocatalyst for efficient degradation of Rhodamine B. The novel magnetic hydrogel paves a promising path for efficient removal of heavy metal ions in wastewater and further resource utilization as photocatalysts.

Adsorption and photodegradation of micropollutant in wastewater by photocatalyst TiO2/rice husk biochar

With the acceleration of global industrialization, organic pollutants have become a threat to ecological safety and human health. This work prepared TiO2/rice husk biochar (TiO2/BC) for removal of bisphenol A (BA) micropollutant in wastewater. Experiment results revealed a low BA removal efficiency by TiO2/BC was observed at 34.5% under the dark environment. However, the removal rate of BA by UV light-assisted TiO2/BC significantly increased to 97.6% in 1 h. The results also demonstrated that the removal performance of BA using TiO2/BC was 2.1times higher than that of commercial TiO2 (46.4%). Besides, the removal efficiency of BA by reused TiO2/BC after eight cycles slightly decreased by 12.8%, demonstrating the excellent properties of the prepared composite. TiO2/BC also exhibited high removal efficiency of BA (over 89%) from the synthetic wastewater sample, indicating the potential utilization of composite for removing BA in wastewater. This work provides a new way to turn biomass waste into useful material and effective method to remove micropollutant BA.

Ethanol templated synthesis of microporous/mesoporous nanozinc oxide with multi-level structure and its outstanding photo-catalytic properties

Zinc oxide has been of interest because of its efficient redox capacity in the UV spectral region. However, the high bandwidth limits its application in the visible region. Although synthesizing heterojunctions and doping with other elements have become the focus of the problem, it inevitably has an impact on the environment. In contrast, the template method is not only environmentally friendly but also can be used to increase the degradation rate by changing the nanoparticle mesoporous structure. Microporous/mesoporous zinc oxide with multi-level structure was synthesized using anhydrous ethanol as a green templating agent in a mild and energy-efficient method. The prepared nZnO was characterized using XRD, SEM, BET, and HR-TEM. XRD confirmed that the formation of hexagonal wurtzite zincite nZnO with good crystallinity. SEM results showed that the products were flower-like structures composed of nanosheets with a thickness of 20 nm and an average diameter of 400 nm. TEM and BET confirmed the presence of pits with diameters ranging from about 1 nm to 20 nm existed on the surface of the nanosheets, while the specific surface area of 28.05 m2/g and the pore volume of 0.069 cm3/g also provide advantages for nZnO as a photocatalytic material. The synthesized nZnO overcame the disadvantage of responding only in the UV region, and the photocatalytic degradation efficiency of MB reached 93.2% after 60 min of xenon lamp irradiation, and stabilized at 86.15% after five photocycling tests. Compared with other kinds of templates, anhydrous ethanol has the advantages of environmental friendliness and simple post-processing, and it also provides ideas for the synthesis of multilevel structures of other nanomaterials.

Construction of type-II scheme SnO@HfC photocatalyst for bisphenol A degradation via peroxymonosulfate activation; DFT and self-cleaning analysis

In this study, novel stannous oxide@hafnium carbide (SnO@HfC) nanocomposite was successfully manufactured by an appropriate hydrothermal scheme which was utilized for the photocatalytic degradation of BPA by stimulation of peroxymonosulfate (PMS) and self-cleaning application. Numerous methods were applied for the characterization of photocatalyst and demonstrated the successful preparation of SnO@HfC nanocomposite. The crystal structures, band structures and density of states for SnO and HfC were explored by DFT analysis. The amazing PMS stimulation performance of SnO@HfC nanocomposite originated from the establishment of a heterojunction, which led to the enhancement of the light response aptitude and the electron conduction competence of the composite. BPA was degraded by 0.75 g/L PMS and SnO@HfC at neutral pH during the period of 60 min. In order to identify active groups in the reaction procedure, quenching experiments and electron paramagnetic resonance (EPR) approaches were also used. In the subsequent active species scavenging assays, where sulfate radicals, hydroxyl radicals, holes, and superoxide radicals were engaged in the degradation of BPA. While, liquid phase mass spectrometry (LC-MS) was used to pinpoint the intermediate metabolites in the course of degradation. SnO@HfC/PMS/light system delivered excellent TOC removal efficiency and less ions leaching. The SnO@HfC nanocomposite proved good durability and reusability in continuous cycle tests along with excellent self-cleaning function on the glass substrate. The SnO@HfC nanocomposite performs admirably in terms of self-cleaning application. The SnO@HfC nanocomposite is expected to be used in the future for the treatment of wastewater that contains pharmaceuticals due to its superior stability and reusability after five consecutive cycles.

Carbon dots/TiO2 enhanced visible light-assisted photocatalytic of leachate: Simultaneous effects and Mechanism insights

The persistence and potential fouling risks associated with humic substances and bacteria present in leachate have gained increasing attention. Therefore, developing efficient and environmentally compatible technologies for their removal is essential. This study presented the hydrothermal synthesis of a photocatalyst by coupling carbon dots (CDs) and bulk TiO2 (P25). The incorporation of CDs increased the photocatalytic performance by enhancing visible light absorption and facilitating the separation of electrons/holes. Compared to P25, the CDs/P25 exhibited optimal photocatalytic activity for humic acid (HA), fulvic acid (FA), and leachate, with 1.64, 1.02, and 1.12 times higher activity, respectively. Remarkedly, the CDs/P25 accelerated the conversion of large HA molecules into small molecules at a faster rate and higher amount than the bulk P25, due to the increase of hydroxyl radicals, monoclinic oxygen radicals, and superoxide radicals. Additionally, the CDs/P25 demonstrated better bacterial-deactivation ability than the P25, with dead bacteria percentages of 83.3% and 34.6%, respectively. This study provides a promising strategy for efficiently applying CDs/P25 photocatalysis to leachate treatment.

Ultrasensitive detection of miRNA-21 by click chemistry and fluorescein-mediated photo-ATRP signal amplification

The development of a convenient and efficient assay using miRNA-21 as a lung cancer marker is of great importance for the early prevention of cancer. Herein, an electrochemical biosensor for the detection of miRNA-21 was successfully fabricated under blue light excitation using click chemistry and photocatalytic atom transfer radical polymerization (photo-ATRP). By using hairpin DNA as a recognition probe, the electrochemical sensor deposits numerous electroactive monomers (ferrocenylmethyl methacrylate) on the electrode surface under the reaction of photocatalyst (fluorescein) and pentamethyldiethylenetriamine, thereby achieving signal amplification. This biosensor is sensitive, precise and selective for miRNA-21, and is highly specific for RNAs with different base mismatches. Under optimal conditions, the biosensor showed a linear relationship in the range of 10 fM ∼1 nM (R2 = 0.995), with a detection limit of 1.35 fM. Furthermore, the biosensor exhibits anti-interference performance when analyzing RNAs in serum samples. The biosensor is based on green chemistry and has the advantages of low cost, specificity and anti-interference ability, providing economic benefits while achieving detection objectives, which makes it highly promising for the analysis of complex samples.