Advances in Bioinspired Superhydrophobic Surfaces Made from Silicones: Fabrication and Application

As research on superhydrophobic materials inspired by the self-cleaning and water-repellent properties of plants and animals in nature continues, the superhydrophobic preparation methods and the applications of superhydrophobic surfaces are widely reported. Silicones are preferred for the preparation of superhydrophobic materials because of their inherent hydrophobicity and strong processing ability. In the preparation of superhydrophobic materials, silicones can both form micro-/nano-structures with dehydration condensation and reduce the surface energy of the material surface because of their intrinsic hydrophobicity. The superhydrophobic layers of silicone substrates are characterized by simple and fast reactions, high-temperature resistance, UV resistance, and anti-aging. Although silicone superhydrophobic materials have the disadvantages of relatively low mechanical stability, this can be improved by the rational design of the material structure. Herein, we summarize the superhydrophobic surfaces made from silicone substrates, including the cross-linking processes of silicones through dehydration condensation and hydrosilation, and the surface hydrophobic modification by grafting hydrophobic silicones. The applications of silicone-based superhydrophobic surfaces have been introduced such as self-cleaning, corrosion resistance, oil-water separation, etc. This review article should provide an overview to the bioinspired superhydrophobic surfaces of silicone-based materials, and serve as inspiration for the development of polymer interfaces and colloid science.

Membranes for Oil/Water Separation: A Review

Recent advancements in separation and membrane technologies have shown a great potential in removing oil from wastewaters effectively. In addition, the capabilities have improved to fabricate membranes with tunable properties in terms of their wettability, permeability, antifouling, and mechanical properties that govern the treatment of oily wastewaters. Herein, authors have critically reviewed the literature on membrane technology for oil/water separation with a specific focus on: 1) membrane properties and characterization, 2) development of various materials (e.g., organic, inorganic, and hybrid membranes, and innovative materials), 3) membranes design (e.g., mixed matrix nanocomposite and multilayers), and 4) membrane fabrication techniques and surface modification techniques. The current challenges and future research directions in materials and fabrication techniques for membrane technology applications in oil/water separation are also highlighted. Thus, this review provides helpful guidance toward finding more effective, practical, and scalable solutions to tackle environmental pollution by oils.

Capacitive Deionization for the Removal of Paraquat Herbicide from Aqueous Solution

In comparison to other conventional methods like adsorption and reverse osmosis (RO), capacitive deionization (CDI) has only been investigated extensively for the removal of inorganic pollutants from water, demonstrating limited practicality. Herein, the study investigated the use of CDI for the removal of paraquat (PQ) herbicide from water by using commercial activated carbon (AC) electrodes. The CDI performance was examined as a function of the initial PQ concentration, applied voltage, flowrate, treatment time, and cycle stability testing in the batch mode approach. The applied voltage had a beneficial effect on the removal efficiency, whereas the removal efficiency of PQ declined as the initial PQ concentration increased. However, the electrosorption capacity gradually increased with the increase of initial feed solutions’ concentration. The maximum removal efficiency and electrosorption capacity achieved at 5 mg/L and 20 mg/L PQ initial concentrations, an applied voltage of 1.2 V, and 5 mL/min flowrate were 100% and 0.33 mg/g and 52.5% and 0.7 mg/g, respectively. Washing the electrodes with distilled water achieved sequential desorption of PQ, and the process produces a waste stream that can be disposed of or treated further. Therefore, the CDI method is considered a promising and efficient method for removing organic pollutants from water including pesticides.

Polystyrene-Fe3O4-MWCNTs Nanocomposites for Toluene Removal from Water

In this research, multi-walled carbon nanotubes (MWCNTs) were functionalized by oxidation with strong acids HNO₃, H₂SO₄, and H₂O₂. Then, magnetite/MWCNTs nanocomposites were prepared and polystyrene was added to prepare polystyrene/MWCNTs/magnetite (PS:MWCNTs:Fe) nanocomposites. The magnetic property of the prepared nano-adsorbent PS:MWCNTs:Fe was successfully checked. For characterization, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and BET surface area were used to determine the structure, morphology, chemical nature, functional groups, and surface area with pore volume of the prepared nano-adsorbents. The adsorption procedures were carried out for fresh MWCNTs, oxidized MWCNTs, MWCNTs-Fe, and PS:MWCNTs:Fe nanocomposites in batch experiments. Toluene standard was used to develop the calibration curve. The results of toluene adsorption experiments exhibited that the PS:MWCNTs:Fe nonabsorbent achieved the highest removal efficiency and adsorption capacity of toluene removal. The optimum parameters for toluene removal from water were found to be 60 min, 2 mg nano-sorbent dose, pH of 5, solution temperature of 35 °C at 50 mL volume, toluene concentration of 50 mg/L, and shaking speed of 240 rpm. The adsorption kinetic study of toluene followed the pseudo-second-order kinetics, with the best correlation (R²) value of 0.998, while the equilibrium adsorption study showed that the Langmuir isotherm was obeyed, which suggested that the adsorption is a monolayer and homogenous.

Using polypropylene needle punch nonwoven sorbents as the interceptor for oil in static and dynamic water experiments

This work was to determine the impact of pore size and thickness of sorbents besides the influence of oil properties on the performance of sorbents used as an interceptor barrier for oils in Static and dynamic water experiments. polypropylene needle punch sorbents were used. SEM test showed the porous structure of sorbents. Oil sorption test investigated that with sorbents had same thickness N1 absorbed oil 8.89 g/g of soybean oil and 7.15 g/g of motor oil. Meanwhile, sorbents with the same pore size, N6 absorbed oil 6.11 g/g of soybean oil and 5.13 g/g of motor oil. All sorbents showed a retention rate of over 75% after 24 h of dripping. Dynamic oil spreading revealed that smaller pore size and higher thickness exhibited higher height wicking. The static performance experiment showed motor oil and soybean oil started to leak at 38 and 32 min for N1, then prolonged with reducing pore size with intercepting efficiency around 70% after 600 min for motor oil and 540 min for soybean oil. In comparison, The motor oil and soybean oil started to leak at 49 and 40 min for N4 and then prolonged with increased thickness with intercepting efficiency around 70% after 480 min for motor oil and 360 min for soybean oil. Under the dynamic experiment, oils spilled quicker with initial leakage of sorbents N3 and N6 at rate flow 55.65 ml/s for motor oil and soybean oil were (41 min, 36 min) and (50 min, 41 min) while intercepting efficiency was (99%, 98.40%) and (99.33%, 98.40%).

Fabrication of a PAN–PA6/PANI membrane using dual spinneret electrospinning followed by in situ polymerization for separation of oil-in-water emulsions

A polyacrylonitrile–polyamide 6/polyaniline (PAN–PA6/PANI) doped membrane was prepared using dual spinneret simultaneous electrospinning of PAN and PA6 and in situ polymerization of aniline at low temperature.

Removal of paraquat from aqueous solutions by a bentonite modified zero-valent iron adsorbent

Bentonite-supported zero-valent iron (B-ZVI) composite is synthesized from bentonite, which was then used as an adsorbent to remove paraquat from aqueous solutions.

Radionuclide tolerance mechanism of plants for ultraselective enrichment of low content of thorium with exceptional selectivity coefficient

Selective enriching low content of radionuclides from radioactive wastewater is a critical issue for environmentally benign utilization of nuclear power. Inspired by the tolerance mechanism of plants to radionuclides, we developed a pH-triggered ultraselective coordinative adsorption (CA) membrane. The as-prepared CA membrane featured the advantages of both coordinative adsorption and membrane separation, including ultrahigh selectivity coefficient of 1242, large capacity (80 L m^-2) and short mass transfer distance. The adsorption isotherms of Th⁴⁺ on the CA membrane were well described by the Freundlich model (R² > 0.99), and the adsorption kinetics have a good fitting by using the pseudo-second-order kinetic model (R² > 0.99). In a continuous separation under gravity, the CA membrane was able to selectively enrich the low content of Th⁴⁺ (0.05 mmol L^-1) in the presence of 700 folds (35 mmol L^-1) of co-existing ions (Na⁺, Mg²⁺, K⁺, Ca²⁺, Sr²⁺, Cs⁺ and Ba²⁺). The exceptional extraction efficiency to Th⁴⁺ was 100%, superior to that (3.7%) of all co-existing ions. Notably, the Th⁴⁺ enriched on the CA membrane was facilely eluted by diluted HNO₃ (0.1 mol L^-1). The Th⁴⁺ in the eluents was enriched by up to 54 folds. The eluted CA membrane was further reused for selective enrichment of Th⁴⁺, which showed no obvious loss of selectivity and enrichment capability. Our strategy might open up a new strategy for realizing ultraselective and recyclable enrichment of low content of irradiation contaminants from wastewater.