p-Quaterphenylene as an Aggregation-Induced Emission Fluorogen in Supramolecular Organogels and Fluorescent Sensors

Aggregation induced emission and volatile acid vapour sensing in acridine appended poly (aryl ether) based low molecular weight organogelator

Considerable research attention has been devoted to the development of portable and rapid fluorescence sensors that can selectively detect volatile acids, due to the harmful effects of acid vapour on the environment and human health. Although various types of fluorophores have been reported for sensing volatile acid vapours, regulation of the sensory response using aggregation induced emissive (AIE) based gelators has rarely been reported. In this study, we present the design and synthesis of a novel organogelator that is capable of sensing volatile acids through AIE. An acridine-attached poly(aryl ether) dendron molecular system is synthesized through an aldimine coupling reaction, which self-assembles and forms a gel, exhibiting AIE behavior. The synthesized molecule and prepared gel were characterized using NMR, MASS, XRD, HRSEM and rheology techniques. The AIE property of APD was investigated using steady-state absorption and emission spectroscopic techniques. The sensory response of the APD gelator was tested with various analytes, and the results indicated that APD shows rapid response, particularly to acid vapours, where the detection limits (DL) of trifluoroacetic acid (TFA), hydrochloric acid (HCl) and nitric acid (HNO3) vapor were as low as 0.22, 0.9 and 0.30 ppm, respectively. An APD solid film in filter paper shows a visual color change from yellow to red in an aqueous acidic medium, and the effect is reversed in an alkaline medium. These findings suggest that an APD gelator could potentially be utilized to generate a portable acid vapor sensor kit due to its low detection limit and rapid response time, and it could be also be used as a substitute for existing acid indicators.

Nanopatterns of molecular spoked wheels as giant homologues of benzene tricarboxylic acids

Molecular spoked wheels with D_3h and C_s symmetry are synthesized by Vollhardt trimerization of C_2v-symmetric dumbbell structures with central acetylene units and subsequent intramolecular ring closure. Scanning tunneling microscopy of the D_3h-symmetric species at the solid/liquid interface on graphite reveals triporous chiral honeycomb nanopatterns in which the alkoxy side chains dominate the packing over the carboxylic acid groups, which remain unpaired. In contrast, C_s-symmetric isomers partially allow for pairing of the carboxylic acids, which therefore act as a probe for the reduced alkoxy chain nanopattern stabilization. This observation also reflects the adsorbate substrate symmetry mismatch, which leads to an increase of nanopattern complexity and unexpected templating of alkoxy side chains along the graphite armchair directions. State-of-the-art GFN-FF calculations confirm the overall structure of this packing and attribute the unusual side-chain orientation to a steric constraint in a confined environment. These calculations go far beyond conventional simple space-filling models and are therefore particularly suitable for this special case of molecular packing.

Scanning tunneling microscopy investigations of phenylene-based molecular spoked wheels with D_3h and C_s symmetries on graphite show the competitive or complementary effects of carboxylic acid groups and alkoxy chains on the nanopattern formation.

Butterfly-like Shape Liquid Crystals Based Fused-Thiophene as Unidimensional Ambipolar Organic Semiconductors with High Mobility

Mesomorphous butterfly-like shape molecules based on benzodithiophene, benzodithiophene-4,8-dione and cyclopentadithiophen-4-one core moieties were efficiently synthesized by the Suzuki-Miyaura coupling and Scholl oxidative cyclo-dehydrogenation reactions' tandem. Most of the butterfly molecules spontaneously self-organize into columnar hexagonal mesophase. The electron-deficient systems possess strong solvent-gelling ability but are not luminescent, whereas the electron-rich terms do not form gels but strongly emit light between 400 and 600 nm. The charge carrier mobility was also measured by time-of-flight transient photocurrent technique in the mesophases for some of the compounds. They display hole-transport performances with positive charge mobility in the 10^-3  cm^-2  V^-1  s^-1 range, consistent with the high degree of ordering and stability of the columnar superstructures. In particular, the mesogen with a benzodithiophen-4,8-dione core shows ambipolar charge carrier transport with both high electron (μ_e =6.6×10^-3  cm^-2  V^-1  s^-1 ) and hole (μ_h =4.5×10^-3  cm^-2  V^-1  s^-1 ) mobility values.

A Lyotropic Liquid Crystal from a Flexible Oligopeptide Amphiphile in Dimethyl Sulfoxide

Despite the rapid progress in peptide liquid crystals (LCs) due to their prominent properties, our investigation on flexible peptide-based LCs is incomplete, mainly resulted from their unclear formation mechanisms and unexploited applications in organic solvents. Here, we develop a lyotropic LC based on a flexible oligopeptide amphiphile, which aggregates into aligned cylinder-like nanostructures in dimethyl sulfoxide (DMSO). The formation mechanism of lyotropic LC in DMSO was probed by the experimental investigation and molecular dynamics simulation, indicating that the hydrogen bonding and hydrophobic and electrostatic interactions contribute to the formation of ordered nanostructures in the organic solvent. Arising from the orientational order and suitable fluidity, we exploit the application of lyotropic LC as an aligned medium to measure the residual dipolar couplings of bioactive molecules. This study not only offers the understanding of the mechanism to create LC systems without rigid aromatic groups but also expands the applications of ordered bottom-up nanomaterials in organic solvents.

Supramolecular organogel formation through three-dimensional α-cyclodextrin nanostructures: solvent chirality-selective organogel formation

Novel supramolecular organogels were efficiently formed by mixing a 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) solution of α-cyclodextrin (α-CD) with 1- or 2-butanol via the formation of three-dimensional hexagonal nanostructures composed of head-to-tail α-CD channel assemblies. Mixing (R)- and (S)-2-butanol with an α-CD/HFIP solution realized (S)-2-butanol-selective organogel formation.

From Paramagnetic to Superparamagnetic Ionic Liquid/Poly(ionic liquid): The Effect of π-π Stacking Interaction

Magnetic ionic liquids (MILs) and poly(magnetic ionic liquids) (PMILs) with FeCl₄^- as anions usually show weak magnetism, such as paramagnetism or antiferromagnetism, at room temperature. Inspired by the natural inorganic ferromagnet with ordered crystal structures, a soft superparamagnetic ionic liquid (TMBBDI[FeCl₄]) and corresponding poly(ionic liquid) (PTMBBDI[FeCl₄]) were prepared by introducing π-π stacking biphenyl groups into the organic cations. Both of the compounds exhibited superparamagnetism from 100 to 300 K, while a ferromagnetic hysteresis loop was found at 300 K. Ferromagnetic interactions were observed from zero field cooling and field cooling studies for both TMBBDI[FeCl₄] and PTMBBDI[FeCl₄]. However, the MIL and PMIL without π-π stacking interaction were paramagnetic without ferromagnetic interaction. The superparamagnetism of the TMBBDI[FeCl₄] and PTMBBDI[FeCl₄] was ascribed to the π-π stacking interactions between biphenyl groups, which not only shortened the Fe-Fe distance to the ferromagnetic interaction range but also increased the order degree of the molecules.

Discotic Organic Gelators in Ion Sensing, Metallogel Formation, and Bioinspired Catalysis

Two organogelators G2 and G3 with a carboxamide group have been synthesized and characterized with different spectroscopic tools. Dimethylformamide or dimethyl sulfoxide solutions of both the compounds upon the addition of a minute quantity of water show the tendency to form gels. Supramolecular self-assembly for gel formation paves the way for aggregation-induced emission enhancement (AIEE) phenomena for both the gelator molecules. Introduction of metal ions in organogels strengthens the gel property without much affecting the fluorescence behavior. However, the introduction of Ag⁺, Fe²⁺, and Fe³⁺ ions in the G2 organogel separately results in total quenching of AIEE, making it possible to sense that particular cation in the gel state. The G3 organogel shows a similar behavior with the Fe²⁺ ion. Remarkably, other metallogels such as Ni(II)G2 and Co(II)G2 can sense sulfide ion and Cu(II)G2 can sense iodide ion by switching off the fluorescence even in multianalyte conditions. Furthermore, the copper-based metallogel Cu(II)G2 can be utilized as a catalyst and reaction medium for aerobic oxidation of catechol to quinone. To the best of our knowledge, this is the first attempt known so far to utilize a metallogel material for bioinspired catalysis such as catechol oxidation.

A dual pH-responsive supramolecular gelator with aggregation-induced emission properties

Functionalising AIE-active aromatic thioethers with self-complementary zwitterionic binding sites leads to a dual pH-responsive supramolecular organogelator with aggregation-induced emission (AIE) properties. The self-assembled fibrillar gel network is highly fluorescent (λem = 490 nm), whereas the addition of both acid and base leads to the sol state with a loss of emission. More over, the gel was found to be thermo- and mechanoresponsive.

Self-Assembly of Azobenzene Derivatives into Organogels and Photoresponsive Liquid Crystals

A new class of coil-rod-coil molecules with an azobenzene core was synthesized. They were found to form robust organogels in several organic solvents. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), FTIR spectroscopy, UV/Vis absorption spectroscopy, ¹ H NMR spectroscopy, and X-ray diffraction (XRD) revealed that in these organogels, the molecules self-assembled into a nanofiber network with an H-type aggregation mode under the joint effect of π-π stacking, intermolecular hydrogen bonding, and van der Waals forces. Interestingly, the incorporation of the azobenzene mesogene into the rigid core led to photoisomerizable liquid crystal materials, which exhibited quick responsiveness to light and temperature, along with the trans-cis transition stimulated by UV light and heating.

A smart organic gel template as metal cation and inorganic anion sensor

A carboxamide based molecule has shown unique gelation property in an aqueous mixture of DMF or DMSO. The gel itself has shown aggregation-induced fluorescence enhanced emission (AIEE), which can be utilized effectively in sensing ferrous and ferric ions as both of them switch off the fluorescence completely. An investigation by IR spectroscopy reveals an enhanced π interaction of nitrile group with the iron center and this could be the possible reason behind the complete quenching of AIEE. This molecule was further investigated for the formation of metallogels for a wide array of cations, which in turn can act in tandem to behave as a dynamic array to detect several anions by either switching off or switching on the emission property of the metallogels.