A comparative investigation of the thermal unfolding of pseudoazurin in the Cu(II)-holo and apo form

Molecular Insight into the High Thermal Stability of Metalloprotein Azurin

We investigate the events characterizing the steps of the unfolding pathway of blue copper metalloprotein azurin using replica exchange molecular dynamics (REMD). Our studies show that the unfolding of azurin begins with the melting of α-helix and β-sheets II and V. This is followed by the melting of other β-sheets and the exposure of hydrophobic protein core to the solvent, resulting in disruptions of its tertiary structure. Free energy surfaces constructed at different temperatures portray different basins that signify the stability of different melted structures in the unfolding process. The contact maps at different temperatures reveal that the strong hydrophobic interaction within the core of the protein is the vital force that renders high stability to this protein. Analysis of the individual β-sheets by looking into their amino acid sequence shows that β-sheets with charged side chains on the surface melt fast compared to others. The β-barrel of azurin is able to dynamically rearrange, and it helps the protein to preserve its hydrophobic core, holding back the native topology from melting fast. B-factor analysis shows that residues of β-sheets III, IV, and VII deviate less from their initial structure at the transition temperature.

Reversible heat inactivation of copper sites precedes thermal unfolding of molluscan (Rapana thomasiana) hemocyanin

Hemocyanin (Hc) is a type-3 copper protein, containing dioxygen-binding active sites consisting of paired copper atoms. In the present study the thermal unfolding of the Hc from the marine mollusc Rapana thomasiana (RtH) has been investigated by combining differential scanning calorimetry, Fourier transform infrared (FTIR) and UV-vis absorption spectroscopy. Two important stages in the unfolding pathway of the Hc molecule were discerned. A first event, with nonmeasurable heat absorption, occurring around 60°C, lowers the binding of dioxygen to the type-3 copper groups. This pretransition is reversible and is ascribed to a slight change in the tertiary structure. In a second stage, with midpoint around 80°C, the protein irreversibly unfolds with a loss of secondary structure and formation of amorphous aggregates. Experiments with the monomeric structural subunits, RtH1 and RtH2, indicated that the heterogeneity in the process of thermal denaturation can be attributed to the presence of multiple 50kDa functional units with different stability. In accordance, the irreversible unfolding of a purified functional unit (RtH2-e) occurred at a single transition temperature. At slightly alkaline pH (Tris buffer) the C-terminal β-sheet rich domain of the functional unit starts to unfold before the α-helix-rich N-terminal (copper containing) domain, triggering the collapse of the global protein structure. Even around 90°C some secondary structure is preserved as shown by the FTIR spectra of all investigated samples, confirming the high thermostability of molluscan Hc.

Changes in non-core regions stabilise plastocyanin from the thermophilic cyanobacterium Phormidium laminosum

We report a theoretical investigation on the different stabilities of two plastocyanins. The first one belongs to the thermophilic cyanobacterium Phormidium laminosum and the second one belongs to its mesophilic relative Synechocystis sp. These proteins share the same topology and secondary-structure elements; however, the melting temperatures of their oxidised species differ by approximately 15 K. Long-time-scale molecular dynamics simulations, performed at different temperatures, show that the thermophilic protein optimises a set of intramolecular interactions (interstrand hydrogen bonding, salt bridging and hydrophobic clustering) within the region that comprises the strands beta 5 and beta 6, loop L5 and the helix. This region exhibits most of the differences in the primary sequence between the two proteins and, in addition, it is involved in the interaction with known physiological partners. Further work is in progress to unveil the specific structural features responsible for the different thermal stability of the two proteins.

Modulation of copper site properties by remote residues determines the stability of plastocyanins

The metal cofactor determines the thermal stability in cupredoxins, but how the redox state of copper modulates their melting points remains unknown. The metal coordination environment is highly conserved in cyanobacterial plastocyanins. However, the oxidised form is more stable than the reduced one in thermophilic Phormidium, but the opposite occurs in mesophilic Synechocystis. We have performed neutral amino-acid substitutions at loops of Phormidium plastocyanin far from the copper site. Notably, mutation P49G/G50P confers a redox-dependent thermal stability similar to that of the mesophilic plastocyanin. Moreover, X-ray absorption spectroscopy reveals that P49G/G50P mutation makes the electron density distribution at the oxidised copper site shift towards that of Synechocystis plastocyanin.

The hyperthermophilic nature of the metallo-oxidase from Aquifex aeolicus

The stability of the Aquifex aeolicus multicopper oxidase (McoA) was studied by spectroscopy, calorimetry and chromatography to understand its thermophilic nature. The enzyme is hyperthermostable as deconvolution of the differential scanning calorimetry trace shows that thermal unfolding is characterized by temperature values at the mid-point of 105, 110 and 114 degrees C. Chemical denaturation revealed however a very low stability at room temperature (2.8 kcal/mol) because copper bleaching/depletion occur before the unfolding of the tertiary structure and McoA is highly prone to aggregate. Indeed, unfolding kinetics measured with the stopped-flow technique quantified the stabilizing effect of copper on McoA (1.5 kcal/mol) and revealed quite an uncommon observation further confirmed by light scattering and gel filtration chromatography: McoA aggregates in the presence of guanidinium hydrochloride, i.e., under unfolding conditions. The aggregation process results from the accumulation of a quasi-native state of McoA that binds to ANS and is the main determinant of the stability curve of McoA. Kinetic partitioning between aggregation and unfolding leads to a very low heat capacity change and determines a flat dependence of stability on temperature.

Role of copper in thermal stability of human ceruloplasmin

Human ceruloplasmin (CP) is a multicopper oxidase essential for normal iron homeostasis. The protein has six domains with one type-1 copper in each of domains 2, 4, and 6; the remaining coppers form a catalytic trinuclear cluster at the interface between domains 1 and 6. To assess the role of the coppers in CP thermal stability, we have probed the thermal unfolding process as a function of scan rate of holo- and apo-forms using several detection methods (circular dichroism, aromatic and 8-anilino-naphthalene-1-sulfonic acid fluorescence, visible absorption, activity, and differential scanning calorimetry). Both species of CP undergo irreversible thermal reactions to denatured states with significant residual structure. For identical scan rates, the thermal midpoint appears at temperatures 15-20 degrees higher for the holo- as compared with the apo- form. The thermal data for both forms were fit by a mechanistic model involving two consecutive, irreversible steps (N --> I --> D). The holo-intermediate, I, has lost one oxidized type-1 copper and secondary structure in at least one domain; however, the trinuclear copper cluster remains intact as it is functional in oxidase activity. The activation parameters obtained from the fits to the thermal transitions were used to assess the kinetic stability of apo- and holo-CP at physiological temperatures (i.e., at 37 degrees C). It emerges that native CP (i.e., with six coppers) is rather unstable and converts to I in <1 day at 37 degrees C. Nonetheless, this form remains intact for more than 2 weeks and may thus be a biologically relevant state of CP in vivo. In contrast, apo-CP unfolds rapidly: the denatured state is reached in <2 days at 37 degrees C.

Thermal stability effects of removing the type-2 copper ligand His306 at the interface of nitrite reductase subunits

Nitrite reductase (NiR) is a highly stable trimeric protein, which denatures via an intermediate, N(3)<--(k)-->U(3)--(k)-->F (N-native, U-unfolded and F-final). To understand the role of interfacial residues on protein stability, a type-2 copper site ligand, His306, has been mutated to an alanine. The characterization of the native state of the mutated protein highlights that this mutation prevents copper ions from binding to the type-2 site and eliminates catalytic activity. No significant alteration of the geometry of the type-1 site is observed. Study of the thermal denaturation of this His306Ala NiR variant by differential scanning calorimetry shows an endothermic irreversible profile, with maximum heat absorption at T (max) approximately equal to 85 degrees C, i.e., 15 degrees C lower than the corresponding value found for wild-type protein. The reduction of the protein thermal stability induced by the His306Ala replacement was also shown by optical spectroscopy. The denaturation pathway of the variant is compatible with the kinetic model N(3)--(k)-->F(3), where the protein irreversibly passes from the native to the final state. No evidence of subunits' dissociation has been found within the unfolding process. The results show that the type-2 copper sites, situated at the interface of two monomers, significantly contribute to both the stability and the denaturation mechanism of NiR.