Affinity-enhanced protein partitioning in decyl beta-D-glucopyranoside two-phase aqueous micellar systems

What Can Be Learned from the Partitioning Behavior of Proteins in Aqueous Two-Phase Systems?

This review covers the analytical applications of protein partitioning in aqueous two-phase systems (ATPSs). We review the advancements in the analytical application of protein partitioning in ATPSs that have been achieved over the last two decades. Multiple examples of different applications, such as the quality control of recombinant proteins, analysis of protein misfolding, characterization of structural changes as small as a single-point mutation, conformational changes upon binding of different ligands, detection of protein-protein interactions, and analysis of structurally different isoforms of a protein are presented. The new approach to discovering new drugs for a known target (e.g., a receptor) is described when one or more previous drugs are already available with well-characterized biological efficacy profiles.

Binding affinity of family 4 carbohydrate binding module on cellulose films of nanocrystals and nanofibrils

The binding affinity and thermodynamics of family 4 carbohydrate-binding module (CBM4), belonging to type B CBM, on model surfaces of cellulose nanocrystals (CNC) and nanofibrils (CNF) were investigated by quartz crystal microbalance with dissipation monitoring (QCM-D) technology in real-time at different temperatures. The thermodynamic parameters associated with the interaction, such as Gibbs free energy, enthalpy change, entropy change and heat capacity were obtained using the van't Hoff analysis via a nonlinear parameter estimation. The results demonstrated CBM4 binds preferentially to both CNF and CNC, whereas the driving forces behind them were very different. The former was related to the hydrogen bonds formed in the CBM4 clefts, resulting in a favorable enthalpy but compensated by unfavorable entropy change; on the contrary, the latter was mainly driven by favorable entropy but compensated by unfavorable enthalpic change due to water rearrangement.

The solvent side of proteinaceous membrane-less organelles in light of aqueous two-phase systems

Water represents a common denominator for liquid-liquid phase transitions leading to the formation of the polymer-based aqueous two-phase systems (ATPSs) and a set of the proteinaceous membrane-less organelles (PMLOs). ATPSs have a broad range of biotechnological applications, whereas PMLOs play a number of crucial roles in cellular compartmentalization and often represent a cellular response to the stress. Since ATPSs and PMLOs contain high concentrations of polymers (such as polyethylene glycol (PEG), polypropylene glycol (PPG), Ucon, and polyvinylpyrrolidone (PVP), Dextran, or Ficoll) or biopolymers (peptides, proteins and nucleic acids), it is expected that the separated phases of these systems are characterized by the noticeable changes in the solvent properties of water. These changes in solvent properties can drive partitioning of various compounds (proteins, nucleic acids, organic low-molecular weight molecules, metal ions, etc.) between the phases of ATPSs or between the PMLOs and their surroundings. Although there is a sizable literature on the properties of the ATPS phases, much less is currently known about PMLOs. In this perspective article, we first represent liquid-liquid phase transitions in water, discuss different types of biphasic (or multiphasic) systems in water, and introduce various PMLOs and some of their properties. Then, some basic characteristics of polymer-based ATPSs are presented, with the major focus being on the current understanding of various properties of ATPS phases and solvent properties of water inside them. Finally, similarities and differences between the polymer-based ATPSs and biological PMLOs are discussed.

Application of an aqueous two-phase micellar system to extract bromelain from pineapple (Ananas comosus) peel waste and analysis of bromelain stability in cosmetic formulations

Bromelain is a set of proteolytic enzymes found in pineapple (Ananas comosus) tissues such as stem, fruit and leaves. Because of its proteolytic activity, bromelain has potential applications in the cosmetic, pharmaceutical, and food industries. The present study focused on the recovery of bromelain from pineapple peel by liquid-liquid extraction in aqueous two-phase micellar systems (ATPMS), using Triton X-114 (TX-114) and McIlvaine buffer, in the absence and presence of electrolytes CaCl2 and KI; the cloud points of the generated extraction systems were studied by plotting binodal curves. Based on the cloud points, three temperatures were selected for extraction: 30, 33, and 36°C for systems in the absence of salts; 40, 43, and 46°C in the presence of KI; 24, 27, and 30°C in the presence of CaCl2 . Total protein and enzymatic activities were analyzed to monitor bromelain. Employing the ATPMS chosen for extraction (0.5 M KI with 3% TX-114, at pH 6.0, at 40°C), the bromelain extract stability was assessed after incorporation into three cosmetic bases: an anhydrous gel, a cream, and a cream-gel formulation. The cream-gel formulation presented as the most appropriate base to convey bromelain, and its optimal storage conditions were found to be 4.0 ± 0.5°C. The selected ATPMS enabled the extraction of a biomolecule with high added value from waste lined-up in a cosmetic formulation, allowing for exploration of further cosmetic potential.

A new micellar aqueous two-phase partitioning system (ATPS) for the separation of proteins

Partitioning of six typical globular proteins with molecular weights ranging from 12.6 to 250 kDa was investigated using an aqueous two-phase system formed by heating a solution containing the individual proteins and n-dodecyldimethylphosphine oxide (APO12) above the cloud point of the nonionic surfactant (approximately 40 degrees C). The partition coefficient, Kp, was much greater at 55 than 45 degrees C and depended on both APO12 and protein concentrations. The value of Kp for bovine beta-lactoglobulin (beta-L) varied from 2 to 60, and was larger for 1.0mg/mL solutions than for ovalbumin (2x greater), bovine serum albumin (3x greater) and lysozyme (12x greater). Catalase and cytochrome c were apparently denatured in the presence of 20mg/mL of APO12 and were not investigated. Large values of Kp for beta-L resulted when the pH of APO12 mixtures containing phospholipids and either a cationic or anionic surfactant in molar ratios of 10:0.5:1.0 was partitioned above or below the isoelectric point of the protein, respectively. The affinity of the proteins for the APO12 micelle was responsible for partitioning of the proteins into the upper phase. Finally, DSC studies with beta-L showed that the denaturing action of n-decyldimethylphosphine oxide (APO10) below 61 degrees C and APO12 at 22 degrees C was reversed by dilution or dialysis, respectively.

Cloud point extraction applied to casein proteins of cow milk and their identification by mass spectrometry

This work describes the optimization of a cloud point extraction (CPE) method for casein proteins from cow milk samples. To promote phase separation, polyoxyethylene(8) isooctylphenyl ether (Triton X-114) and sodium chloride (NaCl) were used as nonionic surfactant and electrolyte, respectively. Using multivariate studies, four major CPE variables were evaluated: Triton X-114 concentration, sample volume, NaCl concentration, and pH. The results show that surfactant concentration and sample volume were the main variable affecting the CPE process, with the following optimized parameters: 1% (w/v) Triton X-114 concentration, 50 microL of sample volume, 6% (w/v) NaCl concentration and extractions carried out at pH 7.0. At these conditions, 923+/-66 and 67+/-2 microg mL(-1) of total protein were found in the surfactant-rich and surfactant-poor phases, respectively. Finally, matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) was then used to evaluate those target proteins (alpha(s1)-casein, alpha(s2)-casein and beta-casein) separation as well as to check the efficiency of the extraction procedure, making a fingerprint of those target proteins possible.

Affinity partitioning of a Cellulomonas fimi beta-mannanase with a mannan-binding module in galactomannan/starch aqueous two-phase system

A new approach in affinity separations was studied by partitioning of Cellulomonas fimi beta-mannanase (EC 3.2.1.78) containing a mannan-binding module in galactomannan/hydroxypropyl starch aqueous two-phase system. Comparison was made with a truncated version of C. fimi beta-mannanase which lacked the mannan-binding module. Results showed that affinity partitioning of the beta-mannanase was achieved due to biospecificity of the mannan-binding module towards the top phase containing galactomannan. Experiments were conducted at pH 8 to prevent enzyme degradation of the phase containing galactomannan. Removal of the top phase polymer was accomplished by beta-mannanase degradation allowed by shifting to the optimal pH 6. In the combination with the genetic fusion of any given protein to the mannan-binding module, the results envision a general procedure for primary affinity recovery of such fusion proteins.

Carbohydrate binding modules: biochemical properties and novel applications

Polysaccharide-degrading microorganisms express a repertoire of hydrolytic enzymes that act in synergy on plant cell wall and other natural polysaccharides to elicit the degradation of often-recalcitrant substrates. These enzymes, particularly those that hydrolyze cellulose and hemicellulose, have a complex molecular architecture comprising discrete modules which are normally joined by relatively unstructured linker sequences. This structure is typically comprised of a catalytic module and one or more carbohydrate binding modules (CBMs) that bind to the polysaccharide. CBMs, by bringing the biocatalyst into intimate and prolonged association with its substrate, allow and promote catalysis. Based on their properties, CBMs are grouped into 43 families that display substantial variation in substrate specificity, along with other properties that make them a gold mine for biotechnologists who seek natural molecular "Velcro" for diverse and unusual applications. In this article, we review recent progress in the field of CBMs and provide an up-to-date summary of the latest developments in CBM applications.

Affinity-tagged green fluorescent protein (GFP) extraction from a clarifiedE. coli cell lysate using a two-phase aqueous micellar system

Green fluorescent protein (GFP) has been proposed as an ideal choice for a protein-based biological indicator for use in the validation of decontamination or disinfection treatments. In this article, we present a potentially scalable and cost-effective way to purify recombinant GFP, produced by fermentation in Escherichia coli, by affinity-enhanced extraction in a two-phase aqueous micellar system. Affinity-enhanced partitioning, which improves the specificity and yield of the target protein by specific bioaffinity interactions, has been demonstrated. A novel affinity tag, family 9 carbohydrate-binding module (CBM9) is fused to GFP, and the resulting fusion protein is affinity-extracted in a decyl beta-D-glucopyranoside (C10G1) two-phase aqueous micellar system. In this system, C10G1 acts as phase forming and as affinity surfactant. We will further demonstrate the implementation of this concept to attain partial recovery of affinity-tagged GFP from a clarified E. coli cell lysate, including the simultaneous removal of other contaminating proteins. The cell lysate was partitioned at three levels of dilution (5x, 10x, and 40x). Irrespective of the dilution level, CBM9-GFP was found to partition preferentially to the micelle-rich phase, with the same partition coefficient value as that found in the absence of the cell lysate. The host cell proteins from the cell lysate were found to partition preferentially to the micelle-poor phase, where they experience less excluded-volume interactions. The demonstration of proof-of-principle of the direct affinity-enhanced extraction of CBM9-GFP from the cell lysate represents an important first step towards developing a cost-effective separation method for GFP, and more generally, for other proteins of interest.