Highly Selective Stable Isotope Labeling of Histidine Residues by Using a Novel Precursor in E. coli-Based Overexpression Systems

Exploring the pH dependence of an improved PETase

Enzymatic recycling of plastic and especially of polyethylene terephthalate (PET) has shown great potential to reduce its negative impact on our society. PET hydrolases (PETases) have been optimized using rational design and machine learning, but the mechanistic details of the PET depolymerization process remain unclear. Belonging to the carboxylic-ester hydrolase family with a canonical Ser-His-Asp catalytic triad, their observed alkaline pH optimum is generally thought to be related to the protonation state of the catalytic His. Here, we explore this aspect in the context of LCCICCG, an optimized PETase, derived from the leaf-branch compost cutinase enzyme. We use NMR to identify the dominant tautomeric structure of the six histidines. Five show surprisingly low pKa values below 4.0, whereas the catalytic H242 in the active enzyme displays a pKa value that varies from 4.9 to 4.7 when temperatures increase from 30°C to 50°C. Whereas the hydrolytic activity of the enzyme toward a soluble substrate can be modeled by the corresponding protonation/deprotonation curve, an important discrepancy is found when the substrate is the solid plastic. This opens the way to further mechanistic understanding of the PETase activity and underscores the importance of studying the enzyme at the liquid-solid interface.

13 Cβ-Valine and 13 Cγ-Leucine Methine Labeling To Probe Protein Ligand Interaction

Precise information regarding the interaction between proteins and ligands at molecular resolution is crucial for effectively guiding the optimization process from initial hits to lead compounds in early stages of drug development. In this study, we introduce a novel aliphatic side chain isotope-labeling scheme to directly probe interactions between ligands and aliphatic sidechains using NMR techniques. To demonstrate the applicability of this method, we selected a set of Brd4-BD1 binders and analyzed 1 H chemical shift perturbation resulting from CH-π interaction of Hβ -Val and Hγ -Leu as CH donors with corresponding ligand aromatic moieties as π acceptors.

Cost-effective selective deuteration of aromatic amino acid residues produces long-lived solution 1H NMR magnetization in proteins

Solution NMR studies of large proteins are hampered by rapid signal decay due to short-range dipolar 1H-1H and 1H-13C interactions. These are attenuated by rapid rotation in methyl groups and by deuteration (2H), so selective 1H,13C-isotope labelling of methyl groups in otherwise perdeuterated proteins, combined with methyl transverse relaxation optimized spectroscopy (methyl-TROSY), is now standard for solution NMR of large protein systems > 25 kDa. For non-methyl positions, long-lived magnetization can be introduced as isolated 1H-12C groups. We have developed a cost-effective chemical synthesis for producing selectively deuterated phenylpyruvate and hydroxyphenylpyruvate. Feeding these amino acid precursors to E. coli in D2O, along with selectively deuterated anthranilate and unlabeled histidine, results in isolated and long-lived 1H magnetization in the aromatic rings of Phe (HD, HZ), Tyr (HD), Trp (HH2, HE3) and His (HD2 and HE1). We are additionally able to obtain stereoselective deuteration of Asp, Asn, and Lys amino acid residues using unlabeled glucose and fumarate as carbon sources and oxalate and malonate as metabolic inhibitors. Combining these approaches produces isolated 1H-12C groups in Phe, Tyr, Trp, His, Asp, Asn, and Lys in a perdeuterated background, which is compatible with standard 1H-13C labeling of methyl groups in Ala, Ile, Leu, Val, Thr, Met. We show that isotope labeling of Ala is improved using the transaminase inhibitor L-cycloserine, and labeling of Thr is improved through addition of Cys and Met, which are known inhibitors of homoserine dehydrogenase. We demonstrate the creation of long-lived 1H NMR signals in most amino acid residues using our model system, the WW domain of human Pin1, as well as the bacterial outer membrane protein PagP.

Specific isotopic labelling and reverse labelling for protein NMR spectroscopy: using metabolic precursors in sample preparation

The study of protein structure, dynamics and function by NMR spectroscopy commonly requires samples that have been enriched ('labelled') with the stable isotopes 13C and/or 15N. The standard approach is to uniformly label a protein with one or both of these nuclei such that all C and/or N sites are in principle 'NMR-visible'. NMR spectra of uniformly labelled proteins can be highly complicated and suffer from signal overlap. Moreover, as molecular size increases the linewidths of NMR signals broaden, which decreases sensitivity and causes further spectral congestion. Both effects can limit the type and quality of information available from NMR data. Problems associated with signal overlap and signal broadening can often be alleviated though the use of alternative, non-uniform isotopic labelling patterns. Specific isotopic labelling 'turns on' signals at selected sites while the rest of the protein is NMR-invisible. Conversely, specific isotopic unlabelling (also called 'reverse' labelling) 'turns off' selected signals while the rest of the protein remains NMR-visible. Both approaches can simplify NMR spectra, improve sensitivity, facilitate resonance assignment and permit a range of different NMR strategies when combined with other labelling tools and NMR experiments. Here, we review methods for producing proteins with enrichment of stable NMR-visible isotopes, with particular focus on residue-specific labelling and reverse labelling using Escherichia coli expression systems. We also explore how these approaches can aid NMR studies of proteins.

Simultaneous measurement of 1HC/N-R2's for rapid acquisition of backbone and sidechain paramagnetic relaxation enhancements (PREs) in proteins

Paramagnetic relaxation enhancements (PREs) are routinely used to provide long-range distance restraints for the determination of protein structures, to resolve protein dynamics, ligand-protein binding sites, and lowly populated species, using Nuclear Magnetic Resonance Spectroscopy (NMR). Here, we propose a simultaneous ¹H-¹⁵ N, ¹H-¹³C SESAME based pulse scheme for the rapid acquisition of ¹H^C/N-R₂ relaxation rates for the determination of backbone and sidechain PREs of proteins. The ¹H^N-R₂ rates from the traditional and our approach on Ubiquitin (UBQ) are well correlated (R² = 0.99), revealing their potential to be used quantitatively. Comparison of the S57C UBQ calculated and experimental PREs provided backbone and side chain Q factors of 0.23 and 0.24, respectively, well-fitted to the UBQ NMR structure, showing that our approach can be used to acquire accurate PRE rates from the functionally important sites of proteins but in at least half the time as traditional methods.

Site-selective 1H/2H labeling enables artifact-free 1H CPMG relaxation dispersion experiments in aromatic side chains

Aromatic side chains are often key residues in enzyme active sites and protein binding sites, making them attractive probes of protein dynamics on the millisecond timescale. Such dynamic processes can be studied by aromatic ¹³C or ¹H CPMG relaxation dispersion experiments. Aromatic ¹H CPMG relaxation dispersion experiments in phenylalanine, tyrosine and the six-ring moiety of tryptophan, however, are affected by ³J ¹H-¹H couplings which are causing anomalous relaxation dispersion profiles. Here we show that this problem can be addressed by site-selective ¹H/²H labeling of the aromatic side chains and that artifact-free relaxation dispersion profiles can be acquired. The method has been further validated by measuring folding-unfolding kinetics of the small protein GB1. The determined rate constants and populations agree well with previous results from ¹³C CPMG relaxation dispersion experiments. Furthermore, the CPMG-derived chemical shift differences between the folded and unfolded states are in excellent agreement with those obtained directly from the spectra. In summary, site-selective ¹H/²H labeling enables artifact-free aromatic ¹H CPMG relaxation dispersion experiments in phenylalanine and the six-ring moiety of tryptophan, thereby extending the available methods for studying millisecond dynamics in aromatic protein side chains.

Optimal Isotope Labeling of Aromatic Amino Acid Side Chains for NMR Studies of Protein Dynamics

Aromatic side chains in proteins are often directly evolved in stabilizing the hydrophobic core, protein binding, or enzymatic activity. They are also responsible for specific local dynamic processes, such as histidine tautomerization or ring flips. Despite their importance, they are often not targeted directly by NMR spectroscopy, because of spectroscopic complications and challenges. This chapter addresses state-of-the-art site-selective ¹³C-labeling methods for aromatic side chains, and describes how they solve several of the spectroscopic issues. A special emphasis is put on thereby enabled protein dynamics experiments of aromatic side chains.

Late metabolic precursors for selective aromatic residue labeling

In recent years, we developed a toolbox of heavy isotope containing compounds, which serve as metabolic amino acid precursors in the E. coli-based overexpression of aromatic residue labeled proteins. Our labeling techniques show excellent results both in terms of selectivity and isotope incorporation levels. They are additionally distinguished by low sample production costs and meet the economic demands to further implement protein NMR spectroscopy as a routinely used method in drug development processes. Different isotopologues allow for the assembly of optimized protein samples, which fulfill the requirements of various NMR experiments to elucidate protein structures, analyze conformational dynamics, or probe interaction surfaces. In the present article, we want to summarize the precursors we developed so far and give examples of their special value in the probing of protein-ligand interaction.

Anthranilic acid, the new player in the ensemble of aromatic residue labeling precursor compounds

The application of metabolic precursors for selective stable isotope labeling of aromatic residues in cell-based protein overexpression has already resulted in numerous NMR probes to study the structural and dynamic characteristics of proteins. With anthranilic acid, we present the structurally simplest precursor for exclusive tryptophan side chain labeling. A synthetic route to ¹³C, ²H isotopologues allows the installation of isolated ¹³C-¹H spin systems in the indole ring of tryptophan, representing a versatile tool to investigate side chain motion using relaxation-based experiments without the loss of magnetization due to strong ¹J_CC and weaker ²J_CH scalar couplings, as well as dipolar interactions with remote hydrogens. In this article, we want to introduce this novel precursor in the context of hitherto existing techniques of in vivo aromatic residue labeling.

Site-selective 13C labeling of histidine and tryptophan using ribose

Experimental studies on protein dynamics at atomic resolution by NMR-spectroscopy in solution require isolated ¹H-X spin pairs. This is the default scenario in standard ¹H-¹⁵N backbone experiments. Side chain dynamic experiments, which allow to study specific local processes like proton-transfer, or tautomerization, require isolated ¹H-¹³C sites which must be produced by site-selective ¹³C labeling. In the most general way this is achieved by using site-selectively ¹³C-enriched glucose as the carbon source in bacterial expression systems. Here we systematically investigate the use of site-selectively ¹³C-enriched ribose as a suitable precursor for ¹³C labeled histidines and tryptophans. The ¹³C incorporation in nearly all sites of all 20 amino acids was quantified and compared to glucose based labeling. In general the ribose approach results in more selective labeling. 1-¹³C ribose exclusively labels His δ2 and Trp δ1 in aromatic side chains and helps to resolve possible overlap problems. The incorporation yield is however only 37% in total and 72% compared to yields of 2-¹³C glucose. A combined approach of 1-¹³C ribose and 2-¹³C glucose maximizes ¹³C incorporation to 75% in total and 150% compared to 2-¹³C glucose only. Further histidine positions β, α and CO become significantly labeled at around 50% in total by 3-, 4- or 5-¹³C ribose. Interestingly backbone CO of Gly, Ala, Cys, Ser, Val, Phe and Tyr are labeled at 40-50% in total with 3-¹³C ribose, compared to 5% and below for 1-¹³C and 2-¹³C glucose. Using ribose instead of glucose as a source for site-selective ¹³C labeling enables a very selective labeling of certain positions and thereby expanding the toolbox for customized isotope labeling of amino-acids.