Retrospective image-based gating of intracoronary ultrasound images for improved quantitative analysis: The intelligate method

CARDIAN: a novel computational approach for real-time end-diastolic frame detection in intravascular ultrasound using bidirectional attention networks

Introduction

Changes in coronary artery luminal dimensions during the cardiac cycle can impact the accurate quantification of volumetric analyses in intravascular ultrasound (IVUS) image studies. Accurate ED-frame detection is pivotal for guiding interventional decisions, optimizing therapeutic interventions, and ensuring standardized volumetric analysis in research studies. Images acquired at different phases of the cardiac cycle may also lead to inaccurate quantification of atheroma volume due to the longitudinal motion of the catheter in relation to the vessel. As IVUS images are acquired throughout the cardiac cycle, end-diastolic frames are typically identified retrospectively by human analysts to minimize motion artefacts and enable more accurate and reproducible volumetric analysis.

Methods

In this paper, a novel neural network-based approach for accurate end-diastolic frame detection in IVUS sequences is proposed, trained using electrocardiogram (ECG) signals acquired synchronously during IVUS acquisition. The framework integrates dedicated motion encoders and a bidirectional attention recurrent network (BARNet) with a temporal difference encoder to extract frame-by-frame motion features corresponding to the phases of the cardiac cycle. In addition, a spatiotemporal rotation encoder is included to capture the IVUS catheter's rotational movement with respect to the coronary artery.

Results

With a prediction tolerance range of 66.7 ms, the proposed approach was able to find 71.9%, 67.8%, and 69.9% of end-diastolic frames in the left anterior descending, left circumflex and right coronary arteries, respectively, when tested against ECG estimations. When the result was compared with two expert analysts' estimation, the approach achieved a superior performance.

Discussion

These findings indicate that the developed methodology is accurate and fully reproducible and therefore it should be preferred over experts for end-diastolic frame detection in IVUS sequences.

End-diastolic segmentation of intravascular ultrasound images enables more reproducible volumetric analysis of atheroma burden

BACKGROUND

Volumetric intravascular ultrasound (IVUS) analysis is currently performed at a fixed frame interval, neglecting the cyclic changes in vessel dimensions occurring during the cardiac cycle that can affect the reproducibility of the results. Analysis of end-diastolic (ED) IVUS frames has been proposed to overcome this limitation. However, at present, there is lack of data to support its superiority over conventional IVUS.

OBJECTIVES

The present study aims to compare the reproducibility of IVUS volumetric analysis performed at a fixed frame interval and at the ED frames, identified retrospectively using a novel deep-learning methodology.

METHODS

IVUS data acquired from 97 vessels were included in the present study; each vessel was segmented at 1 mm interval (conventional approach) and at ED frame twice by an expert analyst. Reproducibility was tested for the following metrics; normalized lumen, vessel and total atheroma volume (TAV), and percent atheroma volume (PAV).

RESULTS

The mean length of the analyzed segments was 50.0 ± 24.1 mm. ED analysis was more reproducible than the conventional analysis for the normalized lumen (mean difference: 0.76 ± 4.03 mm³ vs. 1.72 ± 11.37 mm³ ; p for the variance of differences ratio < 0.001), vessel (0.30 ± 1.79 mm³ vs. -0.47 ± 10.26 mm³ ; p < 0.001), TAV (-0.46 ± 4.03 mm³ vs. -2.19 ± 14.39 mm³ ; p < 0.001) and PAV (-0.12 ± 0.59% vs. -0.34 ± 1.34%; p < 0.001). Results were similar when the analysis focused on the 10 mm most diseased segment. The superiority of the ED approach was due to a more reproducible detection of the segment of interest and to the fact that it was not susceptible to the longitudinal motion of the IVUS probe and the cyclic changes in vessel dimensions during the cardiac cycle.

CONCLUSIONS

ED IVUS segmentation enables more reproducible volumetric analysis and quantification of TAV and PAV that are established end points in longitudinal studies assessing the efficacy of novel pharmacotherapies. Therefore, it should be preferred over conventional IVUS analysis as its higher reproducibility is expected to have an impact on the sample size calculation for the primary end point.

A deep learning methodology for the automated detection of end-diastolic frames in intravascular ultrasound images

Coronary luminal dimensions change during the cardiac cycle. However, contemporary volumetric intravascular ultrasound (IVUS) analysis is performed in non-gated images as existing methods to acquire gated or to retrospectively gate IVUS images have failed to dominate in research. We developed a novel deep learning (DL)-methodology for end-diastolic frame detection in IVUS and compared its efficacy against expert analysts and a previously established methodology using electrocardiographic (ECG)-estimations as reference standard. Near-infrared spectroscopy-IVUS (NIRS-IVUS) data were prospectively acquired from 20 coronary arteries and co-registered with the concurrent ECG-signal to identify end-diastolic frames. A DL-methodology which takes advantage of changes in intensity of corresponding pixels in consecutive NIRS-IVUS frames and consists of a network model designed in a bidirectional gated-recurrent-unit (Bi-GRU) structure was trained to detect end-diastolic frames. The efficacy of the DL-methodology in identifying end-diastolic frames was compared with two expert analysts and a conventional image-based (CIB)-methodology that relies on detecting vessel movement to estimate phases of the cardiac cycle. A window of ± 100 ms from the ECG estimations was used to define accurate end-diastolic frames detection. The ECG-signal identified 3,167 end-diastolic frames. The mean difference between DL and ECG estimations was 3 ± 112 ms while the mean differences between the 1st-analyst and ECG, 2nd-analyst and ECG and CIB-methodology and ECG were 86 ± 192 ms, 78 ± 183 ms and 59 ± 207 ms, respectively. The DL-methodology was able to accurately detect 80.4%, while the two analysts and the CIB-methodology detected 39.0%, 43.4% and 42.8% of end-diastolic frames, respectively (P < 0.05). The DL-methodology can identify NIRS-IVUS end-diastolic frames accurately and should be preferred over expert analysts and CIB-methodologies, which have limited efficacy.

Automated lumen segmentation using multi-frame convolutional neural networks in intravascular ultrasound datasets

Aims

Assessment of minimum lumen areas in intravascular ultrasound (IVUS) pullbacks is time-consuming and demands adequately trained personnel. In this work, we introduce a novel and fully automated pipeline to segment the lumen boundary in IVUS datasets.

Methods and results

First, an automated gating is applied to select end-diastolic frames and bypass saw-tooth artefacts. Second, within a machine learning (ML) environment, we automatically segment the lumen boundary using a multi-frame (MF) convolutional neural network (MFCNN). Finally, we use the theory of Gaussian processes (GPs) to regress the final lumen boundary. The dataset consisted of 85 IVUS pullbacks (52 patients). The dataset was partitioned at the pullback-level using 73 pullbacks for training (20 586 frames), 6 pullbacks for validation (1692 frames), and 6 for testing (1692 frames). The degree of overlapping, between the ground truth and ML contours, median (interquartile range, IQR) systematically increased from 0.896 (0.874-0.933) for MF1 to 0.925 (0.911-0.948) for MF11. The median (IQR) of the distance error was also reduced from 3.83 (2.94-4.98)% for MF1 to 3.02 (2.25-3.95)% for MF11-GP. The corresponding median (IQR) in the lumen area error remained between 5.49 (2.50-10.50)% for MF1 and 5.12 (2.15-9.00)% for MF11-GP. The dispersion in the relative distance and area errors consistently decreased as we increased the number of frames, and also when the GP regressor was coupled to the MFCNN output.

Conclusion

These results demonstrate that the proposed ML approach is suitable to effectively segment the lumen boundary in IVUS scans, reducing the burden of costly and time-consuming manual delineation.

The Evolution of Data Fusion Methodologies Developed to Reconstruct Coronary Artery Geometry From Intravascular Imaging and Coronary Angiography Data: A Comprehensive Review

Understanding the mechanisms that regulate atherosclerotic plaque formation and evolution is a crucial step for developing treatment strategies that will prevent plaque progression and reduce cardiovascular events. Advances in signal processing and the miniaturization of medical devices have enabled the design of multimodality intravascular imaging catheters that allow complete and detailed assessment of plaque morphology and biology. However, a significant limitation of these novel imaging catheters is that they provide two-dimensional (2D) visualization of the lumen and vessel wall and thus they cannot portray vessel geometry and 3D lesion architecture. To address this limitation computer-based methodologies and user-friendly software have been developed. These are able to off-line process and fuse intravascular imaging data with X-ray or computed tomography coronary angiography (CTCA) to reconstruct coronary artery anatomy. The aim of this review article is to summarize the evolution in the field of coronary artery modeling; we thus present the first methodologies that were developed to model vessel geometry, highlight the modifications introduced in revised methods to overcome the limitations of the first approaches and discuss the challenges that need to be addressed, so these techniques can have broad application in clinical practice and research.

Positive remodeling at 3 year follow up is associated with plaque-free coronary wall segment at baseline: a serial IVUS study

AIMS

At present it is unknown what limits the arterial remodeling process during atherosclerotic plaque formation. In healthy arteries remodeling is regulated by the shear stress induced response by the endothelium. As endothelium at the plaque site is assumed to be dysfunctional, we tested the hypothesis that plaque free wall (PFW) determines vascular remodeling during atherosclerotic plaque build-up.

METHODS & RESULTS

66 human coronary ROIs (38 patients) were studied at baseline and at 3 years follow up applying intravascular ultrasound (IVUS). From the IVUS images the lumen and external elastic membrane contours were delineated to assess wall thickness (WT), vessel area (VA), Plaque Area (PA) and plaque burden (PA/VA*100%). WT < 0.5 mm was defined as normal and determined the arc of the PFW (0-360°). Positive remodeling was defined as relative difference of VA over time >5%. At baseline, IVUS-PFW was inversely related to plaque burden (p < 0.05). Positive remodeling was most frequently observed in ROIs with IVUS-PFW > 180° (i.e. larger than half of the circumference) compared to PFW < 180° (55% vs. 12%, p < 0.05). Accordingly, plaques with IVUS-PFW > 180° at baseline had the largest change in VA (1.1 ± 2.1 vs. -0.4 ± 0.6 mm(2), p < 0.05) with an odds ratio of 9.2 to develop positive remodeling.

CONCLUSIONS

Our serial IVUS data show that IVUS-PFW is a determinant of vascular remodeling. ROIs with PFW > 180 at baseline had the highest probability to undergo positive remodeling.

Serial observation of drug-eluting absorbable metal scaffold: multi-imaging modality assessment

BACKGROUND

The drug-eluting absorbable metal scaffold has demonstrated feasibility, safety, and promising clinical and angiographic outcomes at 12 months in human coronary arteries. This study aimed to evaluate the degradation rate and long-term vascular responses to drug-eluting absorbable metal scaffold.

METHODS AND RESULTS

BIOSOLVE-I was a multicenter, single-arm, first-in-man trial assessing the safety and performance of drug-eluting absorbable metal scaffold in 46 patients with coronary artery disease. Patients who underwent serial invasive imaging, such as quantitative coronary angiography, intravascular ultrasound, and optical coherence tomography, at 6 and 12 months were included in this study. From postimplantation to follow-up, arterial curvature and angulation were significantly increased by the degradation process. The greatest increase was seen from postimplantation to 6 months. The systolic-diastolic changes of the curvature and angulation gradually improved throughout the follow-up period. At the site of implantation, vasoconstriction (-10% mean reduction) was observed during the acetylcholine test at 6 months. The average percent hyperechogenicity of the scaffolded segments showed a continuous decrease over time, with the most pronounced changes within the first 6 months (from 22.1±7.0% to 15.8±3.7%; P<0.001). Struts discernible on optical coherence tomography at 6 and 12 months showed full neointimal coverage, with stabilization of the mean scaffold area from 6 to 12 months. Furthermore, the mean neointimal area (1.55±0.51 versus 1.58±0.34 mm(2); P=0.794) remained unchanged from 6 to 12 months.

CONCLUSIONS

This serial analysis of drug-eluting absorbable metal scaffold confirmed the safety and efficacy of this new device, with vasomotion restoration and continued degradation over time demonstrated by multi-invasive imaging modalities.

CLINICAL TRIAL REGISTRATION

URL: http://www.clinicaltrials.gov. Unique identifier: NCT01168830.

Interstudy reproducibility of the second generation, Fourier domain optical coherence tomography in patients with coronary artery disease and comparison with intravascular ultrasound: a study applying automated contour detection

Recently, Fourier domain OCT (FD-OCT) has been introduced for clinical use. This approach allows in vivo, high resolution (15 micron) imaging with very fast data acquisition, however, it requires brief flushing of the lumen during imaging. The reproducibility of such fast data acquisition under intracoronary flush application is poorly understood. To assess the inter-study variability of FD-OCT and to compare lumen morphometry to the established invasive imaging method, IVUS. 18 consecutive patients with coronary artery disease scheduled for PCI were included. In each target vessel a FD-OCT pullback (MGH system, light source 1,310 nm, 105 fps, pullback speed 20 mm/s) was acquired during brief (3 s) injection of X-ray contrast (flow 3 ml/s) through the guiding catheter. A second pullback was repeated under the same conditions after re-introduction of the FD OCT catheter into the coronary artery. IVUS and OCT imaging was performed in random order. FD-OCT and IVUS pullback data were analyzed using a recently developed software employing semi automated lumen contour and stent strut detection algorithms. Corresponding ROI were matched based on anatomical landmarks such as side branches and/or stent edges. Inter-study variability is presented as the absolute difference between the two pullbacks. FD-OCT showed remarkably good reproducibility. Inter-study variability in native vessels (cohort A) was very low for mean and minimal luminal area (0.10 ± 0.38, 0.19 ± 0.57 mm², respectively). Likewise inter-study variability was very low in stented coronary segments (cohort B) for mean lumen, mean stent, minimal luminal and minimal stent area (0.06 ± 0.08, 0.07 ± 0.10, 0.04 ± 0.09, 0.04 ± 0.10 mm², respectively). Comparison to IVUS morphometry revealed no significant differences. The differences between both imaging methods, OCT and IVUS, were very low for mean lumen, mean stent, minimal luminal and minimal stent area (0.10 ± 0.45, 0.10 ± 0.36, 0.26 ± 0.54, 0.05 ± 0.47 mm², respectively). FD-OCT shows excellent reproducibility and very low inter-study variability in both, native and stented coronary segments. No significant differences in quantitative lumen morphometry were observed between FD-OCT and IVUS. Evaluating these results suggest that FD-OCT is a reliable imaging tool to apply in longitudinal coronary artery disease studies.

Long-Term (>10 Years) clinical outcomes of first-in-human biodegradable poly-l-lactic acid coronary stents: Igaki-Tamai stents

BACKGROUND

The purpose of this study was to evaluate the long-term safety of the Igaki-Tamai stent, the first-in-human fully biodegradable coronary stent made of poly-l-lactic acid.

METHODS AND RESULTS

Between September 1998 and April 2000, 50 patients with 63 lesions were treated electively with 84 Igaki-Tamai stents. Overall clinical follow-up (>10 years) of major adverse cardiac events and rates of scaffold thrombosis was analyzed together with the results of angiography and intravascular ultrasound. Major adverse cardiac events included all-cause death, nonfatal myocardial infarction, and target lesion revascularization/target vessel revascularization. During the overall clinical follow-up period (121 ± 17 months), 2 patients were lost to follow-up. There were 1 cardiac death, 6 noncardiac deaths, and 4 myocardial infarctions. Survival rates free of all-cause death, cardiac death, and major adverse cardiac events at 10 years were 87%, 98%, and 50%, respectively. The cumulative rates of target lesion revascularization (target vessel revascularization) were 16% (16%) at 1 year, 18% (22%) at 5 years, and 28% (38%) at 10 years. Two definite scaffold thromboses (1 subacute, 1 very late) were recorded. The latter case was related to a sirolimus-eluting stent, which was implanted for a lesion proximal to an Igaki-Tamai stent. From the analysis of intravascular ultrasound data, the stent struts mostly disappeared within 3 years. The external elastic membrane area and stent area did not change.

CONCLUSION

Acceptable major adverse cardiac events and scaffold thrombosis rates without stent recoil and vessel remodeling suggested the long-term safety of the Igaki-Tamai stent.

Low resolution limits and inaccurate algorithms decrease significantly the value of late loss in current drug-eluting stent trials

Quantitative coronary and vascular angiography (QCA resp., QVA) remains the current gold standard for evaluation of restenosis. Late loss as one of the most commonly accepted parameters to highlight efficacy of the various devices has shown high correlation to clinical parameters but, surprisingly, has no impact on the evaluation of the remaining amount of restenostic tissue. The current clinical practice leads to unrealistic late loss calculations. Smaller late loss differences are usually not greater than the inherited resolution limits of QCA, which is especially the case in small differences between the various stents in the drug-eluting stent era. Late loss include additional systematic and random errors, due to the fact that measurements were taken at two different time points including the inherited resolution and calibration limits of QCA on two occasions. Due to the limited value of late loss in discriminating the small differences between the one and other DES, late lumen area loss and clearly defined calculation algorithms (e.g., MLD-relocation) should be used in future DES studies also to fulfill the more stringent regulatory requirements.

Sequential Turning Acquisition and Reconstruction (STAR) method for four-dimensional imaging of cyclically moving structures

Optical coherence tomography allows for dynamic, three-dimensional (3D+T) imaging of the heart within animal embryos. However, direct 3D+T imaging frame rates remain insufficient for cardiodynamic analysis. Previously, this limitation has been addressed by reconstructing 3D+T representations of the beating heart based on sets of two-dimensional image sequences (2D+T) acquired sequentially at high frame rate and in fixed (and parallel) planes throughout the heart. These methods either require additional hardware to trigger the acquisition of each 2D+T series to the same phase of the cardiac cycle or accumulate registration errors as the slices are synchronized retrospectively by pairs, without a gating signal. Here, we present a sequential turning acquisition and reconstruction (STAR) method for 3D+T imaging of periodically moving structures, which does not require any additional gating signal and is not prone to registration error accumulation. Similarly to other sequential cardiac imaging methods, multiple fast image series are consecutively acquired for different sections but in between acquisitions, the imaging plane is rotated around the center line instead of shifted along the direction perpendicular to the slices. As the central lines of all image-sequences coincide and represent measurements of the same spatial position, they can be used to accurately synchronize all the slices to a single inherent reference signal. We characterized the accuracy of our method on a simulated dynamic phantom and successfully imaged a beating embryonic rat heart. Potentially, this method can be applied for structural or Doppler imaging approaches with any direct space imaging modality such as computed tomography, ultrasound, or light microscopy.

Coronary plaque burden in patients with stable and unstable coronary artery disease using multislice CT coronary angiography

PURPOSE

We evaluated the multislice computed tomography (MSCT) coronary plaque burden in patients with stable and unstable angina pectoris.

MATERIALS AND METHODS

Twenty-one patients with stable and 20 with unstable angina pectoris scheduled for conventional coronary angiography (CCA) underwent MSCT-CA using a 64-slice scanner offering a fast rotation time (330 ms) and higher X-ray tube output (900 mAs). To determine the MSCT coronary plaque burden, we assessed the extent (number of diseased segments), size (small or large), type (calcific, noncalcific, mixed) of plaque, its anatomic distribution and angiographic appearance in all available ≥2-mm segments. In a subset of 15 (seven stable, eight unstable) patients, the detection and classification of coronary plaques by MSCT was verified by intracoronary ultrasound (ICUS).

RESULTS

Sensitivity and specificity of MSCT compared with ICUS to detect significant plaques (defined as ≥1-mm plaque thickness on ICUS) was 83% and 87%. Overall, 473 segments were examined, resulting in 11.6±1.5 segments per patient. Plaques were present in 62% of segments and classified as large in 47% of diseased segments. Thirty-two percent were noncalcific, 25% calcific and 43% mixed. Plaques were most frequently located in the proximal and mid segments. Plaque was found in 33% of segments classified as normal on CCA. Unstable patients had significantly more noncalcific plaques when compared with stable patients (45% vs. 21%, p<0.05).

CONCLUSIONS

MSCT-CA provides important information regarding the coronary plaque burden in patients with stable and unstable angina.

First-in-man evaluation of intravascular optical frequency domain imaging (OFDI) of Terumo: a comparison with intravascular ultrasound and quantitative coronary angiography

AIMS

The objective of this study is to evaluate the feasibility and safety of imaging human coronary arteries in vivo by optical frequency domain imaging (OFDI) in comparison to intravascular ultrasound (IVUS). OFDI has been recently developed to overcome the limitations of conventional time-domain optical coherence tomography (OCT), namely the need for proximal balloon occlusion. The Terumo-OFDI system is capable of acquiring images with high-speed automated pullback (up to 40 mm/sec) and requires only a short injection (3-4 sec) of small amount of x-ray contrast (9-16 ml).

METHODS AND RESULTS

Nineteen patients who underwent stent implantation were enrolled. IVUS/OFDI were performed before and after stenting. The incidences of any adverse event and angiographic adverse findings were recorded. Lumen area (LA) was measured by IVUS and OFDI at 1 mm intervals in the stented segments (n=19) as well as in the proximal, distal, and to-be-stented segments (n=40). In addition, lumen area in the stented segment was also measured by edge (E-) and video-densitometric (VD-) quantitative coronary angiography (QCA). The OFDI images were obtained without any adverse event related to imaging procedures. Post stenting (n=19), minimal LA (MLA) measured by OFDI (5.84 ± 1.89 mm2) was larger than that of E-QCA (4.16 ± 1.46 mm2, p<0.001) and VD-QCA (4.92 ± 1.55 mm2, p<0.05). It was smaller than IVUS-MLA (6.26 ± 2.01 mm2, N.S.) but the correlation between the two measurements was highly significant (R2=0.82, p<0.001).

CONCLUSIONS

The OFDI imaging is feasible both before and after stenting and has a promising safety profile. The OFDI provided clear high resolution images and robust lumen measurements.

Detection and quantification of coronary atherosclerotic plaque by 64-slice multidetector CT: a systematic head-to-head comparison with intravascular ultrasound

OBJECTIVE

We evaluated the ability of 64-slice multidetector computed tomography (MDCT)-derived plaque parameters to detect and quantify coronary atherosclerosis, using intravascular ultrasound (IVUS) as the reference standard.

METHODS

In 32 patients, IVUS and 64-MDCT was performed. The MDCT and IVUS datasets of 44 coronary arteries were co-registered using a newly developed fusion technique and quantitative parameters were derived from both imaging modalities. The threshold of >0.5 mm of maximum wall thickness was used to establish plaque presence on MDCT and IVUS.

RESULTS

We analyzed 1364 coregistered 1-mm coronary cross-sections and 255 segments of 5-mm length. Compared with IVUS, 64-MDCT enabled correct detection in 957 of 1109 cross-sections containing plaque (sensitivity 86%). In 180 of 255 cross-sections atherosclerosis was correctly excluded (specificity 71%). On the segmental level, MDCT detected 213 of 220 segments with any atherosclerotic plaque (sensitivity 96%), whereas the presence of any plaque was correctly ruled out in 28 of 32 segments (specificity 88%). Interobserver agreement for the detection of atherosclerotic cross-sections was moderate (Cohen's kappa coefficient K=0.51), but excellent for the atherosclerotic segments (K=1.0). Pearson's correlation coefficient for vessel plaque volumes measured by MDCT and IVUS was r=0.91 (p<0.001). Bland-Altman analysis showed a slight non-significant underestimation of any plaque volume by MDCT (p=0.5), with a trend to underestimate noncalcified and overestimate mixed/calcified plaque volumes (p=0.22 and p=0.87 respectively).

CONCLUSION

MDCT is able to detect and quantify atherosclerotic plaque. Further improvement in CT resolution is necessary for more reliable assessment of very small and distal coronary plaques.

Invasive imaging technologies: can we reconcile light and sound?

Since the introduction of intravascular, catheter-based invasive imaging and diagnostic tools in the catheterization laboratories two decades ago, the functional assessment of angiographically moderate or ambiguous lesions by fractional flow reserve measurements represents the established standard of care today. Likewise, intravascular ultrasound (IVUS) is widely accepted to guide treatment strategy in complex lesions, such as long or left main stem lesions. Developments are driven by the clinical interest to optimize treatment, prevent periprocedural complications, understand treatment failure and understand progression of atherosclerosis. As a result, a variety of devices are now clinically available that enable detection and monitoring of specific plaque features over time, such as the presence of necrotic core by IVUS-VH, a lipid-core plaque by near infrared (NIR) spectroscopy or a thin fibrous cap atheroma by optical coherence tomography (OCT). As the physical boundaries for both light and sound are different, these imaging technologies offer different advantages and limitations. Light-based technologies offer unparalleled high image resolution (OCT) or unparalleled high sensitivity and specificity for distinct plaque components (NIR spectroscopy), whereas conventional IVUS offers a much better tissue penetration. From a clinical perspective, both types of information are valuable. Ideally, this information should easily and in real time be available in the catheterization laboratory, consisting of co-registered datasets gained during a single catheter pullback. On this background, a combined NIR spectroscopy and IVUS catheter has recently been introduced for clinical use. The article discusses the potential and limitations of these different technologies. They may allow advanced coronary plaque diagnosis in a fast, accurate, reliable, user- and patient-friendly manner and, as such, can help to improve clinical practice today and therapeutic options in the future.

Evaluation of in-stent restenosis in the APPROACH trial (Assessment on the Prevention of Progression by Rosiglitazone On Atherosclerosis in diabetes patients with Cardiovascular History)

To determine (1) the medium-term effect of rosiglitazone and glipizide on intra-stent neointima hyperplasia, (2) restenosis pattern as assessed by intra-vascular ultrasound (IVUS) and quantitative coronary angiography (QCA) in patients with T2DM and coronary artery disease. A total of 462 patients with T2DM were randomized to rosiglitazone or glipizide for up to 18 months in the APPROACH trial, and had evaluable baseline and follow-up IVUS examinations. There was no significant difference in the size of plaque behind stent between the rosiglitazone and glipizide groups at 18 months among those treated with a bare metal stent (−5.6 mm³ vs. 1.9 mm³; P = 0.61) or with a drug-eluting stent (12.1 mm³ vs. 5.5 mm³; P = 0.09). Similarly, there was no significant difference in percentage intimal hyperplasia volume between the rosiglitazone and glipizide groups at 18 months among those treated with a bare metal stent (24.1% vs. 19.8%; P = 0.38) or with a drug-eluting stent (9.8% vs. 8.3%; P = 0.57). QCA data (intra-stent late loss, intra-stent diameter stenosis or binary restenosis) were not different between the rosiglitazone and glipizide groups. This study suggests that both rosiglitazone and glipizide have a similar effect on neointimal growth at medium term follow-up, a finding that warrants investigation in dedicated randomized trials.

Image-based cardiac phase retrieval in intravascular ultrasound sequences

Longitudinal motion during in vivo pullbacks acquisition of intravascular ultrasound (IVUS) sequences is a major artifact for 3-D exploring of coronary arteries. Most current techniques are based on the electrocardiogram (ECG) signal to obtain a gated pullback without longitudinal motion by using specific hardware or the ECG signal itself. We present an image-based approach for cardiac phase retrieval from coronary IVUS sequences without an ECG signal. A signal reflecting cardiac motion is computed by exploring the image intensity local mean evolution. The signal is filtered by a band-pass filter centered at the main cardiac frequency. Phase is retrieved by computing signal extrema. The average frame processing time using our setup is 36 ms. Comparison to manually sampled sequences encourages a deeper study comparing them to ECG signals.

Small coronary calcifications are not detectable by 64-slice contrast enhanced computed tomography

Recently, small calcifications have been associated with unstable plaques. Plaque calcifications are both in intravascular ultrasound (IVUS) and multi-slice computed tomography (MSCT) easily recognized. However, smaller calcifications might be missed on MSCT due to its lower resolution. Because it is unknown to which extent calcifications can be detected with MSCT, we compared calcification detection on contrast enhanced MSCT with IVUS. The coronary arteries of patients with myocardial infarction or unstable angina were imaged by 64-slice MSCT angiography and IVUS. The IVUS and MSCT images were registered and the arteries were inspected on the presence of calcifications on both modalities independently. We measured the length and the maximum circumferential angle of each calcification on IVUS. In 31 arteries, we found 99 calcifications on IVUS, of which only 47 were also detected on MSCT. The calcifications missed on MSCT (n = 52) were significantly smaller in angle (27° ± 16° vs. 59° ± 31°) and length (1.4 ± 0.8 vs. 3.7 ± 2.2 mm) than those detected on MSCT. Calcifications could only be detected reliably on MSCT if they were larger than 2.1 mm in length or 36° in angle. Half of the calcifications seen on the IVUS images cannot be detected on contrast enhanced 64-slice MSCT angiography images because of their size. The limited resolution of MSCT is the main reason for missing small calcifications.

3D fusion of intravascular ultrasound and coronary computed tomography for in-vivo wall shear stress analysis: a feasibility study

Wall shear stress, the force per area acting on the lumen wall due to the blood flow, is an important biomechanical parameter in the localization and progression of atherosclerosis. To calculate shear stress and relate it to atherosclerosis, a 3D description of the lumen and vessel wall is required. We present a framework to obtain the 3D reconstruction of human coronary arteries by the fusion of intravascular ultrasound (IVUS) and coronary computed tomography angiography (CT). We imaged 23 patients with IVUS and CT. The images from both modalities were registered for 35 arteries, using bifurcations as landmarks. The IVUS images together with IVUS derived lumen and wall contours were positioned on the 3D centerline, which was derived from CT. The resulting 3D lumen and wall contours were transformed to a surface for calculation of shear stress and plaque thickness. We applied variations in selection of landmarks and investigated whether these variations influenced the relation between shear stress and plaque thickness. Fusion was successfully achieved in 31 of the 35 arteries. The average length of the fused segments was 36.4 ± 15.7 mm. The length in IVUS and CT of the fused parts correlated excellently (R (2) = 0.98). Both for a mildly diseased and a very diseased coronary artery, shear stress was calculated and related to plaque thickness. Variations in the selection of the landmarks for these two arteries did not affect the relationship between shear stress and plaque thickness. This new framework can therefore successfully be applied for shear stress analysis in human coronary arteries.

Approaching artery rigid dynamics in IVUS

Tissue biomechanical properties (like strain and stress) are playing an increasing role in diagnosis and long-term treatment of intravascular coronary diseases. Their assessment strongly relies on estimation of vessel wall deformation. Since intravascular ultrasound (IVUS) sequences allow visualizing vessel morphology and reflect its dynamics, this technique represents a useful tool for evaluation of tissue mechanical properties. Image misalignment introduced by vessel-catheter motion is a major artifact for a proper tracking of tissue deformation. In this work, we focus on compensating and assessing IVUS rigid in-plane motion due to heart beating. Motion parameters are computed by considering both the vessel geometry and its appearance in the image. Continuum mechanics laws serve to introduce a novel score measuring motion reduction in in vivo sequences. Synthetic experiments validate the proposed score as measure of motion parameters accuracy; whereas results in in vivo pullbacks show the reliability of the presented methodologies in clinical cases.

Quantitative ex vivo and in vivo comparison of lumen dimensions measured by optical coherence tomography and intravascular ultrasound in human coronary arteries

INTRODUCTION AND OBJECTIVES

The relationship between the lumen dimensions obtained in human coronary arteries using intravascular ultrasound (IVUS) and those obtained using optical coherence tomography (OCT) is not well understood. The objectives were to compare the lumen measurements obtained ex vivo in human coronary arteries using IVUS, OCT and histomorphometry, and in vivo in patients using IVUS and OCT with and without balloon occlusion.

METHODS

Ex vivo study: the lumen areas of matched anatomical sections of human coronary arteries were measured using IVUS, OCT and histology. In vivo study: the lumen areas in matched sections were measured using IVUS and OCT with and without occlusion.

RESULTS

Ex vivo: in the eight specimens studied, the lumen area obtained using OCT and IVUS was larger than that obtained using histomorphometry: mean difference 0.8+/-1 mm(2) (28%) for OCT and 1.3+/-1.1 mm(2) (40%) for IVUS. In vivo: in the five vessels analyzed, the lumen area obtained using IVUS was larger than that obtained using OCT: mean difference 1.67+/-0.54 mm(2) (33.7%) for IVUS relative to OCT with occlusion and 1.11+/-0.53 mm(2) (21.5%) relative to OCT without occlusion. The lumen area obtained using OCT without occlusion was larger than that obtained using OCT with occlusion: mean difference 0.61+/-0.23 mm(2) (13%).

CONCLUSIONS

In fixed human coronary arteries, both IVUS and OCT overestimated the lumen area compared with histomorphometry. In vivo the lumen dimensions obtained using IVUS were larger than those obtained using OCT, with or without occlusion. Moreover, the OCT image acquisition technique (i.e. with or without occlusion) also had an impact on lumen measurement.

High temporal resolution OCT using image-based retrospective gating

High temporal resolution OCT imaging is very advantageous for analyzing cardiac mechanics in the developing embryonic heart of small animals. An image-based retrospective gating technique is presented to increase the effective temporal resolution of an OCT system and to allow visualization of systolic dynamics in 3D. The gating technique employs image similarity measures for rearranging asynchronously acquired input data consisting of a time series of 2D images at each z position along the heart volume, to produce a time sequence of 3D volumes of the beating heart. The study includes a novel robust validation technique, which quantitatively evaluates the accuracy of the gating technique, in addition to visual evaluations by 2D multiplanar reformatting (MPR) and 3D volume rendering. The retrospective gating and validation is demonstrated on a stage 14 embryonic quail heart data set. Using the validation scheme, it is shown that the gating is accurate within a standard deviation of 4.7 ms, which is an order of magnitude shorter than the time interval during which systolic contraction (approximately 50 ms) occurs in the developing embryo. This gating method has allowed, for the first time, clear visualization of systolic dynamics of the looping embryonic heart in 3D.

MAHOROBA, first-in-man study: 6-month results of a biodegradable polymer sustained release tacrolimus-eluting stent in de novo coronary stenoses

AIMS

To report the 4-month angiographic and 6-month clinical follow-up in first-in-man study using the tacrolimus-eluting bioabsorbable polymer-coated cobalt-chromium MAHOROBA stent.

METHODS AND RESULTS

A total of 47 patients with either stable angina or unstable angina, or silent myocardial ischaemia, based on a de novo coronary stenosis that could be covered by a single 18 mm stent in a native coronary artery with a diameter between 3.0 and 3.5 mm were enrolled at three sites. The primary endpoint was in-stent late loss at 4 months. The secondary endpoints include %volume obstruction of the stents assessed by intravascular ultrasound (IVUS) at 4 months and major adverse cardiac events (MACE) at 6 months. Forty-seven patients were enrolled. Procedural success was achieved in 97.9%. At 4-month follow-up, in-stent late loss was 0.99 +/- 0.46 mm, whereas in-stent %volume obstruction in IVUS was 34.8 +/- 15.8%. At 6 months, there were no deaths, but 2 patients suffered from a myocardial infarction and 11 patients required ischaemia-driven repeat revascularization. The composite MACE rate was 23.4%.

CONCLUSION

This tacrolimus-eluting stent failed to prevent neointimal hyperplasia, despite the theoretical advantages of the tacrolimus, which has less inhibitory effects on endothelial cells than smooth muscle cells.

Re-examining minimal luminal diameter relocation and quantitative coronary angiography--intravascular ultrasound correlations in stented saphenous vein grafts: methodological insights from the randomised RRISC trial

AIMS

Angiographic parameters (such as late luminal loss) are common endpoints in drug-eluting stent trials, but their correlation with the neointimal process and their reliability in predicting restenosis are debated.

METHODS AND RESULTS

Using quantitative coronary angiography (QCA) data (49 bare metal stent and 44 sirolimus-eluting stent lesions) and intravascular ultrasound (IVUS) data (39 bare metal stent and 34 sirolimus-eluting stent lesions) from the randomised Reduction of Restenosis In Saphenous vein grafts with Cypher stent (RRISC) trial, we analysed the "relocation phenomenon" of QCA-based in-stent minimal luminal diameter (MLD) between post-procedure and follow-up and we correlated QCA-based and IVUS-based restenotic parameters in stented saphenous vein grafts. We expected the presence of MLD relocation for low late loss values, as MLD can "migrate" along the stent if minimal re-narrowing occurs, while we anticipated follow-up MLD to be located close to post-procedural MLD position for higher late loss. QCA-based MLD relocation occurred frequently: the site of MLD shifted from post-procedure to follow-up an "absolute" distance of 5.8 mm [2.5-10.2] and a "relative" value of 29% [10-46]. MLD relocation failed to correlate with in-stent late loss (rho = 0.14 for "absolute" MLD relocation [p = 0.17], and rho=0.03 for "relative" relocation [p = 0.811). Follow-up QCA-based and IVUS-based MLD values well correlated in the overall population (rho = 0.76, p < 0.001), but QCA underestimated MLD on average 0.55 +/- 0.49 mm, and this was mainly evident for lower MLD values. Conversely, the location of QCA-based MLD failed to correlate with the location of IVUS-based MLD (rho = 0.01 for "absolute" values--in mm [p = 0.911, rho = 0.19 for "relative" values--in % [p = 0.111). Overall, the ability of late loss to "predict" IVUS parameters of restenosis (maximum neointimal hyperplasia diameter, neointimal hyperplasia index and maximum neointimal hyperplasia area) was moderate (rho between 0.46 and 0.54 for the 3 IVUS parameters).

CONCLUSIONS

These findings suggest the need for a critical re-evaluation of angiographic parameters (such as late loss) as endpoints for drug-eluting stent trials and the use of more precise techniques to describe accurately and properly the restenotic process.

Robust image-based IVUS pullbacks gating

Intracoronary UltraSound (IVUS) imaging allows to obtain high resolution images of internal part of coronary arteries. This tool is unique in the possibility to explore internal vessel structures of the coronary wall, being a powerful tool for diagnosis. Since the coronary vessel is moving due to the periodical contraction and expansion of heart muscles, the acquired images present different artifacts. One of the most severe problems is the longitudinal oscillation of the IVUS catheter inside the vessel. To alleviate this problem, ECG-gating has been proposed. The goal of gating is to have subsequent frames that represent the internal vessel section in "stable" position and avoid the repetition of frames; that is to generate an image sequence in which the artifacts due to the heart beat have been removed while, possible translation due to vessel tortuosity can still be present. This paper presents a simple and efficient model of catheter longitudinal movement together with a fast and robust image based gating algorithm. Experimental results on 9 sequences from 7 patients, plus a comparison with ECG gating are presented.

Assessment on the Prevention of Progression by Rosiglitazone on Atherosclerosis in diabetes patients with Cardiovascular History (APPROACH): study design and baseline characteristics

BACKGROUND

Rosiglitazone, a thiazolidinedione, has effects on insulin sensitivity and cardiovascular risk factors that may favorably impact the progression of coronary atherosclerosis.

METHODS

APPROACH is a double-blind randomized clinical trial comparing the effects of the insulin sensitizer rosiglitazone with the insulin secretagogue glipizide on the progression of coronary atherosclerosis. Patients with type 2 diabetes and coronary artery disease undergoing clinically indicated coronary angiography or percutaneous coronary intervention are randomized to receive rosiglitazone or glipizide for 18 months using a titration algorithm designed to provide comparable glycemic control between treatment groups. The primary end point is change in percent atheroma volume from baseline to study completion in a nonintervened coronary artery, as measured by intravascular ultrasound. Cardiovascular events are adjudicated by an end point committee.

RESULTS

A total of 672 patients were randomized. The mean age was 61 years, hemoglobin A(1c) (HbA(1c)) 7.2%, body mass index 29.5 kg/m(2), and median duration of diabetes 4.8 years. At baseline, approximately half of the participants were receiving oral antidiabetic monotherapy (53.9%) with 27.5% receiving dual combination therapy and 17.9% treated with diet and exercise alone. Approximately two thirds of the participants (68%) had dyslipidemia, 79.9% hypertension, and 24% prior myocardial infarction.

CONCLUSIONS

APPROACH has fully enrolled a high-risk patient population and will compare the glucose-independent effects of rosiglitazone and glipizide on the progression of coronary atherosclerosis, as well as provide additional data on the cardiovascular safety of rosiglitazone in patients with type 2 diabetes and coronary artery disease.

Quantification of coronary plaque by 64-slice computed tomography: a comparison with quantitative intracoronary ultrasound

BACKGROUND

Noninvasive assessment of coronary atherosclerotic plaque may be useful for risk stratification and treatment of atherosclerosis.

MATERIALS AND METHODS

We studied 47 patients to investigate the accuracy of coronary plaque volume measurement acquired with 64-slice multislice computed tomography (MSCT), using newly developed quantification software, when compared with quantitative intracoronary ultrasound (QCU). Quantitative MSCT coronary angiography (QMSCT-CA) was performed to determine plaque volume for a matched region of interest (regional plaque burden) and in significant plaque defined as a plaque with > or =50% area obstruction in QCU, and compared with QCU. Dataset with image blurring and heavy calcification were excluded from analysis.

RESULTS

In 100 comparable regions of interest, regional plaque burden was highly correlated (coefficient r = 0.96; P < 0.001) between QCU and QMSCT-CA, but QMSCT-CA overestimated the plaque burden by a mean difference of 7 +/- 33 mm3 (P = 0.03). In 76 significant plaques detected within the regions of interest, plaque volume determined by QMSCT-CA was highly correlated (r = 0.98; P < 0.001) with a slight underestimation of 2 +/- 17 mm3 (P = not significant) when compared with QCU. Calcified and mixed plaque volume was slightly overestimated by 4 +/- 19 mm3 (P = ns) and noncalcified plaque volume was significantly underestimated by 9 +/- 11 mm3 (P < 0.001) with QMSCT-CA. Overall, the limits of agreement for plaque burden/volume measurement between QCU and QMSCT-CA were relatively large. Reproducibility for the measurements of regional plaque burden with QMSCT-CA was good, with a mean intraobserver and interobserver variability of 0% +/- 16% and 4% +/- 24%, respectively.

CONCLUSIONS

Quantification of coronary plaque within selected proximal or middle coronary segments without image blurring and heavy calcification with 64-slice CT was moderately accurate with respect to intravascular ultrasound and demonstrated good reproducibility. Further improvement in CT resolution is required for more reliable measurement of coronary plaques using quantification software.

Modelling of image-catheter motion for 3-D IVUS

Three-dimensional intravascular ultrasound (IVUS) allows to visualize and obtain volumetric measurements of coronary lesions through an exploration of the cross sections and longitudinal views of arteries. However, the visualization and subsequent morpho-geometric measurements in IVUS longitudinal cuts are subject to distortion caused by periodic image/vessel motion around the IVUS catheter. Usually, to overcome the image motion artifact ECG-gating and image-gated approaches are proposed, leading to slowing the pullback acquisition or disregarding part of IVUS data. In this paper, we argue that the image motion is due to 3-D vessel geometry as well as cardiac dynamics, and propose a dynamic model based on the tracking of an elliptical vessel approximation to recover the rigid transformation and align IVUS images without loosing any IVUS data. We report an extensive validation with synthetic simulated data and in vivo IVUS sequences of 30 patients achieving an average reduction of the image artifact of 97% in synthetic data and 79% in real-data. Our study shows that IVUS alignment improves longitudinal analysis of the IVUS data and is a necessary step towards accurate reconstruction and volumetric measurements of 3-D IVUS.

Cardiac phase extraction in IVUS sequences using 1-D Gabor filters

A main issue in the automatic analysis of Intravascular Ultrasound (IVUS) images is the presence of periodic changes provoked by heart motion during the cardiac cycle. Although the Electrocardiogram (ECG) signal can be used to gate the sequence, few IVUS systems incorporate the ECG-gating option, and the synchronization between them implies several issues. In this paper, we present a fast and robust method to assign a phase in the cardiac cycle to each image in the sequence directly from in vivo clinical IVUS sequences. It is based on the assumption that the vessel wall is significantly brighter than the blood in each IVUS beam. To guarantee stability in this assumption, we use normalized reconstructed images. Then, the wall boundary is extracted for all the radial beams in the sequence and a matrix with these positions is formed. This matrix is filtered using a bank of 1-D Gabor filters centered at the predominant frequency of a given number of windows in the sequence. After filtering, we combine the responses to obtain a unique phase within the cardiac cycle for each image. For this study, we gate the sequence to make the sequence comparable with other ones of the same patient. The method is tested with 12 pullbacks of real patients and 15 synthetic tests.

Effect of perindopril on coronary remodelling: insights from a multicentre, randomized study

AIMS

This study sought to evaluate the effect of perindopril in coronary remodelling.

METHODS AND RESULTS

In this sub-study of a double-blind, multicentre trial, patients without clinical evidence of heart failure were randomized to perindopril 8 mg/day or placebo for at least 3 years and IVUS investigation was performed at both time-points. Positive and negative remodelling were defined as a relative increase (positive remodelling) or decrease (negative remodelling) of the mean vessel cross-sectional area (CSA)>2 SD of the mean intra-observer difference. A total of 118 matched evaluable IVUS (711 matched 5 mm segments) were available at follow-up. After a median follow-up of 3.0 (inter-quartile range 1.9, 4.1) years, there was no significant difference in the change of plaque CSA between perindopril (360 segments) and placebo (351 segments) groups, P=0.27. Conversely, the change in vessel CSA was significantly different between groups (perindopril -0.18+/-2.4 mm2 vs. placebo 0.19+/-2.4, P = 0.04). Negative remodelling occurred more frequently in the perindopril than in the placebo group (34 vs. 25%, P=0.01). In addition, the placebo group showed a larger, although not significant, mean remodelling index (RI) than the perindopril group (1.03+/-0.2 vs. 1.00+/-0.2, P=0.06). The temporal change in vessel dimensions assessed by the RI was significantly correlated with the change in plaque dimensions (r=0.48, P<0.0001).

CONCLUSION

In this sub-analysis of a multicentre, controlled study, long-term administration of perindopril was associated with a constrictive remodelling pattern without affecting the lumen.

Long-term effect of perindopril on coronary atherosclerosis progression (from the perindopril's prospective effect on coronary atherosclerosis by angiography and intravascular ultrasound evaluation [PERSPECTIVE] study)

The multicenter EUROPA trial of 12,218 patients showed that perindopril decreased adverse clinical events in patients with established coronary heart disease. The PERSPECTIVE study, a substudy of the EUROPA trial, evaluated the effect of perindopril on coronary plaque progression as assessed by quantitative coronary angiography and intravascular ultrasound (IVUS). In total 244 patients (mean age 57 years, 81% men) were included. Evaluable paired quantitative coronary angiograms were obtained from 96 patients randomized to perindopril and from 98 patients to placebo. Concomitant treatment at baseline consisted of aspirin (90%), lipid-lowering agents (70%), and beta blockers (60%). The primary and secondary end point was the difference of minimum and mean lumen diameters (quantitative coronary angiography) or mean plaque cross-sectional area (IVUS) measured at baseline and 3-year follow-up between the perindopril and placebo groups. After a median follow-up of 3.0 years (range 1.9 to 4.1), no differences in change in quantitative coronary angiographic or IVUS measurements were detected between the perindopril and placebo groups (minimum and mean luminal diameters -0.07 +/- 0.4 vs -0.02 +/- 0.4 mm, p = 0.34; mean luminal diameter -0.05 +/- 0.2 vs -0.05 +/- 0.3 mm, p = 0.89; mean plaque cross-sectional area -0.18 +/- 1.2 vs -0.02 +/- 1.2 mm(2), p = 0.48). In conclusion, we found no progression in coronary artery disease by quantitative coronary angiography and IVUS with long-term administration of perindopril or placebo, possibly because most patients were on concomitant treatment with a statin.

Intravascular ultrasound comparison of sirolimus-eluting stent versus bare metal stent implantation in diseased saphenous vein grafts (from the RRISC [Reduction of Restenosis In Saphenous Vein Grafts With Cypher Sirolimus-Eluting Stent] trial)

The randomized Reduction of Restenosis In Saphenous Vein Grafts with Cypher Sirolimus-Eluting Stent trial compared angiographic outcomes of sirolimus-eluting stents (SESs) versus bare metal stents (BMSs) in saphenous vein grafts (SVG). Using intravascular ultrasound (IVUS) performed during 6-month follow-up angiography, we compared the vascular effects of the 2 types of stent on SVGs. Of 75 patients (96 lesions) included, 59 patients underwent IVUS in 61 SVGs; 29 patients received 40 SESs for 34 lesions, and 30 patients received 42 BMSs for 39 lesions. IVUS parameters (diameters, areas, and volumes) were compared in the 2 groups. A specific analysis was performed for overlapping SESs. Median neointimal volume was 1.3 mm(3) (interquartile range 0 to 13.1) in SESs versus 24.5 (7.8 to 39.5) in BMSs (p <0.001). Minimal incomplete stent apposition was detected at only 3 stent edges (2 BMSs, 1 SES) next to ectatic regions of the SVG. Compared with single SESs, overlapping SESs showed significant increases in neointimal reaction, with a neointimal volume of 0.6 mm(3)/mm of stent (0.1 to 1.8) versus 0 (0 to 0.4) in single SESs (p = 0.03), and this phenomenon was mainly localized in overlapping SES segments, where neointimal volume per millimeter of stent was 1.1 mm(3)/mm (0.6 to 4.4) versus 0 (0 to 1.3) in nonoverlapping segments (p = 0.05). In conclusion, SESs effectively inhibit neointimal hyperplasia volume compared with BMSs in diseased vein grafts, without evidence of increased incomplete apposition risk. The neointimal response to overlapping SES layers seems higher than to a single SES layer.

Reproducible coronary plaque quantification by multislice computed tomography

BACKGROUND

The aim of this study was to investigate reproducibility and accuracy of computer-assisted coronary plaque measurements by multislice computed tomography coronary angiography (QMSCT-CA).

METHODS AND RESULTS

Forty-eight patients undergoing MSCT-CA and coronary arteriography for symptomatic coronary artery disease and quantitative intravascular ultrasound (IVUS, QCU) were examined. Two investigators performed the QMSCT-CA twice and a third investigator performed the QCU, all blinded for each other's results. There was no difference found for the matched region of interest (ROI) lengths (QCU 29.4 +/- 13 mm vs. QMSCT-CA 29.6 +/- 13 mm, P = 0.6; total length = 1,400 mm). The comparison of volumetric measurements showed (lumen QCU 267 +/- 139 mm(3) vs. mean QMSCT-CA 177 +/- 91 mm(3), P < 0.001; vessel 454 +/- 194 mm(3) vs. 398 +/- 187 mm(3), P <<0.001; and plaque 189 +/- 93 mm(3) vs. 222 +/- 121 mm(3); investigator 1, P = 0.02; and investigator 2, P = 0.07) significant differences. Automated lumen detection was also applied for QMSCT-CA (218 +/- 112 mm(3), P < 0.001 vs. QCU). The interinvestigator variability measurements for QMSCT-CA showed no significant differences.

CONCLUSION

QMSCT-CA systematically underestimates absolute coronary lumen- and vessel dimensions when compared with QCU. However, repeated measurements of coronary plaque by QMSCT-CA showed no statistically significant differences, although, the outcome showed a scattered result. Automated lumen detection for QMSCT-CA showed improved results when compared with those of human investigators.

Randomized double-blind comparison of sirolimus-eluting stent versus bare-metal stent implantation in diseased saphenous vein grafts: six-month angiographic, intravascular ultrasound, and clinical follow-up of the RRISC Trial

OBJECTIVES

We sought to compare, in a randomized fashion, sirolimus-eluting stents (SES) versus bare-metal stents (BMS) in saphenous vein grafts (SVGs).

BACKGROUND

Sirolimus-eluting stents reduce restenosis and repeated revascularization in native coronary arteries compared with BMS. However, randomized data in SVG are absent.

METHODS

Patients with SVG lesions were randomized to SES or BMS. All were scheduled to undergo 6-month coronary angiography. The primary end point was 6-month angiographic in-stent late lumen loss. Secondary end points included binary angiographic restenosis, neointimal volume by intravascular ultrasound and major adverse clinical events (death, myocardial infarction, target lesion, and vessel revascularization).

RESULTS

A total of 75 patients with 96 lesions localized in 80 diseased SVGs were included: 38 patients received 60 SES for 47 lesions, whereas 37 patients received 54 BMS for 49 lesions. In-stent late loss was significantly reduced in SES (0.38 +/- 0.51 mm vs. 0.79 +/- 0.66 mm in BMS, p = 0.001). Binary in-stent and in-segment restenosis were reduced, 11.3% versus 30.6% (relative risk [RR] 0.37; 95% confidence interval [CI] 0.15 to 0.97, p = 0.024) and 13.6% versus 32.6% (RR 0.42; 95% CI 0.18 to 0.97, p = 0.031), respectively. Median neointimal volume was 1 mm(3) (interquartile range 0 to 13) in SES versus 24 (interquartile range 8 to 34) in BMS (p < 0.001). Target lesion and vessel revascularization rates were significantly reduced, 5.3% versus 21.6% (RR 0.24; 95% CI 0.05 to 1.0, p = 0.047) and 5.3% versus 27% (RR 0.19; 95% CI 0.05 to 0.83, p = 0.012), respectively. Death and myocardial infarction rates were not different.

CONCLUSIONS

Sirolimus-eluting stents significantly reduce late loss in SVG as opposed to BMS. This is associated with a reduction in restenosis rate and repeated target lesion and vessel revascularization procedures. (The RRISC Study; http://clinicaltrials.gov/ct/show; NCT00263263).