Molecular and Biological Catalysts Coimmobilization on Electrode by Combining Diazonium Electrografting and Sequential Click Chemistry

An innovative method for controlled synthesis of bicomponent monolayer films obtained by reduction of diazonium

This study presents a novel method based on the electrochemical co-reduction of two aryldiazonium salts, enabling the synthesis of controlled two-component monolayer thin films on carbon in a single step. By introducing a 12-carbon alkyl chain as a spacer between the aryldiazonium function and the functional group, precise control over film thickness and composition was achieved. The alkyl chain effectively standardizes the reduction potential, enabling the equalization of reactivity and precise stoichiometric control. Experimental results from spectroscopic, electrochemical, and X-ray photoelectron spectroscopy analyses validate the effectiveness of the method in controlling the composition of the mixed layers.

Catalyst Design through Grafting of Diazonium Salts-A Critical Review on Catalyst Stability

In the pursuit of designing a reusable catalyst with enhanced catalytic activity, recent studies indicate that electrochemical grafting of diazonium salts is an efficient method of forming heterogeneous catalysts. The aim of this review is to assess the industrial applicability of diazonium-based catalysts with particular emphasis on their mechanical, chemical, and thermal stability. To this end, different approaches to catalyst production via diazonium salt chemistry have been compared, including the immobilization of catalysts by a chemical reaction with a diazonium moiety, the direct use of diazonium salts and nanoparticles as catalysts, the use of diazonium layers to modulate wettability of a carrier, as well as the possibility of transforming the catalyst into the corresponding diazonium salt. After providing descriptions of the most suitable carriers, the most common deactivation routes of catalysts have been discussed. Although diazonium-based catalysts are expected to exhibit good stability owing to the covalent bond created between a catalyst and a post-diazonium layer, this review indicates the paucity of studies that experimentally verify this hypothesis. Therefore, use of diazonium salts appears a promising approach in catalysts formation if more research efforts can focus on assessing their stability and long-term catalytic performance.

Covalent Grafting of Dielectric Films on Cu(111) Surface via Electrochemical Reduction of Aryl Diazonium Salts

Covalent grafting of dielectric films containing polyhedral oligomeric silsesquioxane (POSS) on the surface of Cu(111) is performed by a one-step electrochemical reduction of diazonium salts. This method is efficient and economic and performs in a proton-polar solvent of deionized water and tetrahydrofuran (THF), where the monomer employs an octavinylsilsesquioxane (OVS) containing a POSS core. The eight vinyl bonds contained in OVS are used to participate in aryl radical-initiated polymerization reactions to form films. The formed film is dense and covers the copper surface completely and uniformly. The thickness of the film can be controlled by adjusting the reaction time. The components of the films are mainly polynitrophenyl (PNP) or polyaminophenyl (PAP) as well as poly(octavinylsilsesquioxane) (POVS), and the POVS content could be adjusted by the applied voltage. The introduction of POSS prevents the copper surface from being oxidized and often gives the film good properties such as good dielectric properties, mechanical properties, and thermal properties. In addition, the presence of Cu-O-C and Cu-C bonds between the film and copper interface is confirmed at different film thicknesses by X-ray photoelectron spectroscopy (XPS), which allowed the construction of covalent bonds between metal and nonmetal, further enhancing the bonding between the film and copper. Organic films prepared by electrochemical reduction of diazonium salts using OVS as a monomer will have potential significance for the future development of the electronics industry.

Fine-Tuning the Electrocatalytic Regeneration of NADH Cofactor Using [Rh(Cp*)(bpy)Cl]+-Functionalized Metal-Organic Framework Films

Electrochemical regeneration of the reduced form of the nicotinamide adenine dinucleotide (NADH) cofactor catalyzed by immobilized [Rh(Cp*)(bpy)Cl]⁺ is a promising approach for the enzymatic synthesis of many valuable chemicals with NAD-dependent dehydrogenases. However, rational control of the efficiency is often limited by the irregular structure of the electrode/electrolyte interface and the accessibility of the molecular catalyst. Here, we propose an electrochemical system for NADH cofactor regeneration, based on highly ordered three- dimensional (3D) metal-organic framework (NU-1000) films. [Rh(Cp*)(bpy)Cl]⁺ is incorporated at the zirconium nodes of NU-1000 via solvent-assisted ligand incorporation (SALI), leading to a diffusion-controlled behavior, associated with an electron hopping mechanism. Varying the ratio of redox-active [Rh(Cp*)(bpy)Cl]⁺ and inactive postgrafting agents enables the elaboration of functional electrodes with tunable electrocatalytic activity for NADH regeneration. The exceptionally high faradic efficiency of 97%, associated with a very high turnover frequency (TOF) of ∼1400 h^-1 for NADH regeneration, and the total turnover number (TTN) of over 20000 for the enzymatic conversion from pyruvate to l-lactate, when coupled with l-lactate dehydrogenases (LDH) as a model reaction, open up promising perspectives for employing these electrodes in various alternative bioelectrosynthesis approaches.

Bulk Electrocatalytic NADH Cofactor Regeneration with Bipolar Electrochemistry

Electrochemical regeneration of reduced nicotinamide adenine dinucleotide (NADH) is an extremely important challenge for the electroenzymatic synthesis of many valuable chemicals. Although some important progress has been made with modified electrodes concerning the reduction of NAD⁺ , the scale-up is difficult due to mass transport limitations inherent to large-size electrodes. Here, we propose instead to employ a dispersion of electrocatalytically active modified microparticles in the bulk of a bipolar electrochemical cell. In this way, redox reactions occur simultaneously on all of these individual microelectrodes without the need of a direct electrical connection. The concept is validated by using [Rh(Cp*)(bpy)Cl]⁺ functionalized surfaces, either of carbon felt as a reference material, or carbon microbeads acting as bipolar objects. In the latter case, enzymatically active 1,4-NADH is electroregenerated at the negatively polarized face of the particles. The efficiency of the system can be fine-tuned by controlling the electric field in the reaction compartment and the number of dispersed microelectrodes. This wireless bioelectrocatalytic approach opens up very interesting perspectives for electroenzymatic synthesis in the bulk phase.

Para-Fluoro-Thiol Reaction on Anchor Layers Grafted from an Aryldiazonium Salt: A Tool for Surface Functionalization with Thiols

A new coupling reaction, the para-fluoro-thiol (PFT) reaction, activated by base at room temperature, is reported for carbon surface functionalization. 4-Nitrothiophenol (4-NTP) and (3-nitrobenzyl)mercaptan (3-NBM) were coupled to pentafluorophenyl (F₅-Ph) anchor layers grafted from the aryldiazonium ion formed in situ. The relative yields of the PFT reactions, estimated from the electrochemical responses of coupled nitrophenyl (NP) and nitrobenzyl (NB) groups, depended on the nucleophilicity of the thiolate and the strength of the base. The highest surface concentration (4.6 × 10^-10 mol cm^-2) was obtained using 3-NBM in the presence of [Bu₄N]OH; this concentration corresponds to the maximum that is typically achieved for other high-yielding coupling reactions at aryldiazonium ion anchor layers. The PFT reaction is expected to be applicable to the numerous thiol derivatives commonly restricted to self-assembled monolayer (SAM) formation at gold and other noble metals, thereby opening a simple new approach for interface design on carbon substrates. The strategy may also have advantages for modification of gold surfaces: the layer prepared by coupling 3-NBM to F₅-Ph films on gold was found to be more stable to storage under ambient conditions than self-assembled monolayers of 3-NBM.

The Role of Aryldiazonium Chemistry in Designing Electrochemical Aptasensors for the Detection of Food Contaminants

Food safety monitoring assays based on synthetic recognition structures such as aptamers are receiving considerable attention due to their remarkable advantages in terms of their ability to bind to a wide range of target analytes, strong binding affinity, facile manufacturing, and cost-effectiveness. Although aptasensors for food monitoring are still in the development stage, the use of an electrochemical detection route, combined with the wide range of materials available as transducers and the proper immobilization strategy of the aptamer at the transducer surface, can lead to powerful analytical tools. In such a context, employing aryldiazonium salts for the surface derivatization of transducer electrodes serves as a simple, versatile and robust strategy to fine-tune the interface properties and to facilitate the convenient anchoring and stability of the aptamer. By summarizing the most important results disclosed in the last years, this article provides a comprehensive review that emphasizes the contribution of aryldiazonium chemistry in developing electrochemical aptasensors for food safety monitoring.

Electrografting of Carbon Surfaces with Aliphatic Chains and its Effect on the Rectification of Ferrocene as Redox Probe in Solution

The mediated oxidation of acetate and octanoate ions in acetonitrile was used to covalently modify carbon surfaces with films bearing saturated aliphatic chains of different length. Film thickness increases proportionally with the length of the aliphatic chain within the carboxylate precursor. The thickest film was obtained from octanoate oxidation and rectification occurs when ferrocene is used as redox probe in acetonitrile solution. This effect increases with the bulky and hydrophobic nature of the supporting electrolyte cations; n-Hx₄ N⁺ >n-Bu₄ N⁺ >Me₄ N⁺ . The combination of the bulky and hydrophobic properties of the supporting electrolyte ions as well as the hydrophobic properties of the electrografted films is the basis of rectification of ferrocene in cyclic voltammetry experiments. This phenomenon was simulated through a CEC mechanism in solution, where the mass transport inside the film channels was emulated through single chemical equilibria.

Building Tailored Interfaces through Covalent Coupling Reactions at Layers Grafted from Aryldiazonium Salts

Aryldiazonium ions are widely used reagents for surface modification. Attractive aspects of their use include wide substrate compatibility (ranging from plastics to carbons to metals and metal oxides), formation of stable covalent bonding to the substrate, simplicity of modification methods that are compatible with organic and aqueous solvents, and the commercial availability of many aniline precursors with a straightforward conversion to the active reagent. Importantly, the strong bonding of the modifying layer to the surface makes the method ideally suited to further on-surface (postfunctionalization) chemistry. After an initial grafting from a suitable aryldiazonium ion to give an anchor layer, a target species can be coupled to the layer, hugely expanding the range of species that can be immobilized. This strategy has been widely employed to prepare materials for numerous applications including chemical sensors, biosensors, catalysis, optoelectronics, composite materials, and energy conversion and storage. In this Review our goal is first to summarize how a target species with a particular functional group may be covalently coupled to an appropriate anchor layer. We then review applications of the resulting materials.

Tailoring the performance of electrochemical biosensors based on carbon nanomaterials via aryldiazonium electrografting

Carbon nanomaterials (CNs) offer some of the most valuable properties for electrochemical biosensing applications, such as good electrical conductivity, wide electrochemical stability, high specific surface area, and biocompatibility. Regardless the envisioned sensing application, endowing CNs with specific functions through controlled chemical functionalization is fundamental for promoting the specific binding of the analyte. As a versatile and straightforward method of surface functionalization, aryldiazonium chemistry have been successfully used to accommodate in a stable and reproducible way different functionalities, while the electrochemical route has become the favourite choice since the deposition conditions can be readily controlled and adapted to the substrate. In particular, the modification of CNs by electrochemical reduction of aryl diazonium salts is established as a powerful tool which allows tailoring the chemical and electronic properties of the sensing platform. By outlining the stimulating results disclosed in the last years, this article provides not only a comprehensively review, but also a rational assessment on contribution of aryldiazonium electrografting in developing CNs-based electrochemical biosensors. Furthermore, some of the emerging challenges to be surpassed to effectively implement this methodology for in vivo and point of care analysis are also highlighted.