Ring-opening polymerization of lactide with group 3 metal complexes supported by dianionic alkoxy-amino-bisphenolate ligands: combining high activity, productivity, and selectivity

Enantiomorphic Site-Assisted Chain End Control Stereospecific Alternating Copolymerization of Chiral Cyclic Diesters

Stereospecific alternating copolymerization of different chiral cyclic esters is one feasible approach to enrich the structural diversity of copolyesters and tailor their properties. However, dramatically different reactivities of different cyclic esters let a perfectly stereospecific alternating polymerization of these cyclic esters be a challenge, thus the catalyst is required to balance their reactivities. Herein, a remarkable enantiomorphic site effect on chain end control was discovered and successfully utilized to balance the reactivities of highly reactive S, S-lactide (S, S-LA) and low reactive R, R-ethylglycolide (R, R-EG)/R, R-propylglycolide (R, R-PG) during their heterospecific alternating copolymerization. The enantiomorphic site of R, R-SalenAl complex can increase the relative reactivity of R, R-EG/R, R-PG and suppress that of S, S-LA, then a perfectly alternating sequence of the copolymer of S, S-LA and R, R-EG/R, R-PG can be achieved (Palt=0.96/0.91); inversely, using S, S-SalenAl complex, the significant enantiomorphic site effect enlarges the reactivity difference of two monomers, the alternating level was just 0.70/0.68 even to 0.61. Poly(S, S-LA-alt-R, R-EG) with a high alternating regularity exhibits lower glass transition temperatures and a dramatically higher elongation at break (ϵB=449±51 % (Palt=0.96) vs ϵB=6±1% (Palt=0.70)).

Syndioselective Ring-Opening Polymerization of β-Lactones Enabled by Dimethylbiphenyl-Salen Yttrium Complexes

Polyhydroxyalkanoates (PHAs) have served as promising alternatives to traditional petroleum-based plastics. Chemical synthesis of stereoregular PHAs via stereocontrolled ring-opening polymerization (ROP) of racemic β-lactones was a desired strategy with a formidable challenge. Herein, we developed a class of DiMeBiPh-salen yttrium complexes that adopted a cis-α configuration for stereoselective ROP of rac-β-butyrolactones (rac-BBL) and rac-β-valerolactone (rac-BVL). Notably, catalyst Y5 promoted robust polymerization with TOF up to 104 h-1 and furnished syndiotactic P3HB, P3HV, and P(3HB)-co-P(3HV) copolymers with Pr values of up to 0.95. Varying the compositions in P(3HB)-co-P(3HV) copolymers offered an intriguing opportunity to fine tune the thermal properties. Our kinetic study supported a polymeryl exchange mechanism. This work demonstrated that the DiMeBiPh-salen system could serve as a new catalytic framework for the stereoselective ROP of β-lactones, which leverages the catalyst design for stereoselective polymerization.

Solvent-Dependent Sequence-Controlled Copolymerization of Lactones: Tailoring Material Properties from Robust Plastics to Tough Elastomers

Copolymerization stands as a versatile and potent method for tailoring polymer properties by adjusting structural unit composition and sequence distribution. However, achieving sequence-controlled copolymerization in a one-step and one-pot process remains challenging. This study introduces a solvent-dependent sequence-controlled copolymerization strategy to produce block and statistical copolyesters from 4-phenyl-2-oxabicyclo[2.1.1]hexan-3-one (4Ph-BL) and ϵ-caprolactone (ϵ-CL). The distinct kinetics of the two monomers enable the facile synthesis of diblock and triblock copolyesters, PCL-b-P(4Ph-BL) and P(4Ph-BL)-b-PCL-b-P(4Ph-BL), in non-coordinating solvents, such as dichloromethane and toluene. Conversely, coordinating solvents like tetrahydrofuran, 2-methyltetrahydrofuran, 2,5-dimethyltetrahydrofuran, 1,4-dioxane, and 1,2-dimethoxyethane facilitate frequent transesterifications, yielding statistical copolyesters P[CL-stat-(4Ph-BL)] with varying ratios of heterosequences. Density functional theory (DFT) calculations confirmed that coordinating solvents stabilize the transition state for transesterification, thereby validating their role in triggering this process. By varying the microstructures and compositions, the resultant copolyesters display tunable thermal and mechanical properties, evolving from robust plastics with an ultimate tensile strength of up to 46.3±3.1 MPa to tough elastomers with >99.3 % elastic recovery. All the copolyesters exhibit remarkable thermal stability (Td,5%=376 °C) and maintain desirable chemical circularity (>92 %), supporting a closed-loop life cycle for sustainable material economy.

Anilido-Oxazoline-Ligated Iron Alkoxide Complexes for Living Ring-Opening Polymerization of Cyclic Esters with Controllability

Anilido-oxazoline-ligated iron complexes, including bis(anilido-oxazolinate) iron(II), mononuclear iron(II) alkyl and aryloxide, as well as the dinuclear analogues, were synthesized, and their catalytic performance on ring-opening polymerization (ROP) has been studied. Transmetalation of FeCl2(THF)1.5 with in situ-generated anilido-oxazolinate lithium afforded the bis(anilido-oxazolinate) iron complexes 1 and 2. Half-sandwich anilido-oxazolinate iron trimethylsilylalkyl complexes 3 and 4 could be synthesized in good yields via taking pyridine as an L-type ligand. Treatment of 3 with benzyl alcohol and 4-phenoxyphenol, respectively, generated the dimeric alkoxide or aryloxide complexes 5 and 6, whereas the reaction with 2,4,6-trimethylphenol and 2,6-di-tert-butyl-4-methylphenol yielded the mononuclear aryloxide complexes 7 and 8, respectively. The iron alkoxide and aryloxide complexes were active single component catalysts for the ROP of ε-caprolactone (CL). Remarkably, the dinuclear complex 5 exhibited excellent controllability, livingness, and high initiation efficiency for ROP of CL. ROP of CL derivatives by 5 produced the corresponding polycyclic esters with good controllability, and the well-defined block copolymers could be generated by sequentially feeding different monomers. The chain initiation and propagation processes were investigated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and kinetics analysis. In addition, a computational study was conducted to rationalize the mechanism and synergistic effect of the alkoxide-bridged bimetallic iron centers.

Achieving Exceptional Thermal and Hydrolytic Resistance in Chemically Circular Polyesters via In-Chain 1,3-Cyclobutane Rings

Polyesters, a highly promising class of circular polymers for achieving a closed-loop sustainable plastic economy, inherently exhibit material stability defects, especially in thermal and hydrolytic instability. Here, we introduce a class of polyesters, P(4R-BL) (R=Ph, Bu), featuring conformationally rigid 1,3-cyclobutane rings in the backbone. These polyesters not only exhibit superior thermostability (Td,5%=376-380 °C) but also demonstrate exceptional hydrolytic resistance with good integrity even after 1 year in basic and acidic aqueous solutions, distinguishing themselves from typical counterparts. Tailoring the flexibility of the side group R enables the controlled thermal and mechanical performance of P(4Ph-BL) and P(4Bu-BL) to rival durable syndiotactic polystyrene (SPS) and low-density polyethylene (LDPE), respectively. Significantly, despite their high stability, both polyesters can be effectively depolymerized into pristine monomers, establishing a circular life cycle.

Synthesis of Poly(δ-caprolactone) via Bis(phenolate) Rare-Earth Metal Complexes Mediated Ring-Opening Polymerization and Its Chemical Recycling

New amine-amino-bis(phenolate) ligands (H2LtBu and H2LCl) with a cyclic tertiary amine (pyrrolidine) as a side arm and tBu or Cl group on the phenolate ring have been prepared. The alkane elimination reaction between these free ligands and rare-earth tris(alkyl)s Ln(CH2SiMe3)3(THF)2 afforded the corresponding silylalkyl complexes LtBuLnCH2SiMe3(THF) (Ln = Y (1), Lu (2)) and LClYCH2SiMe3(THF) (3), where the solid-state structure of complex 1 was unambiguously confirmed by X-ray diffraction (XRD) analysis. These rare-earth metal complexes have been utilized as catalysts for the ring-opening polymerization (ROP) of biobased δ-caprolactone (δCL), either in the absence or presence of alcohols, to give poly(δ-caprolactone) (PδCL) with controlled molecular weight and narrow distribution (Đ < 1.2). The polymerization kinetics of δCL in toluene with yttrium complexes 1 and 3 were investigated. Oligomers prepared with complex 3 alone and the 3/PhCHMeOH binary catalyst system were well characterized with 1H NMR spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS). Moreover, chemical recycling of the resultant PδCL was achieved with high yield in a solution at ambient temperature (>92%) or in bulk at 130 °C (>82%) by using commercial KOtBu as a promotor.

Monodentate Alkoxy/Aryloxy Anchored Yttrium Dihydrides; Anticipated Outcomes and Surprises

The synthesis, characterization, and solid-state structure of bulky alkoxy- and aryloxy-supported yttrium polynuclear hydrides are reported. Hydrogenolysis of the supertrityl alkoxy anchored yttrium dialkyl, Y(OTr*)(CH₂SiMe₃)₂(THF)₂ (1) (Tr* = tris(3,5-di-tert-butylphenyl)methyl), resulted in the clean conversion to the tetranuclear dihydride, [Y(OTr*)H₂(THF)]₄ (1a). X-ray analysis revealed a highly symmetrical structure (4̅ site symmetry) with the four Y atoms located on the corners of a compressed tetrahedron, each bonded to an OTr* and tetrahydrofuran (THF) ligand and the cluster held together by four face-capping, μ₃-H, and four edge-bridging, μ₂-H, hydrides. DFT calculations on the full system with and without THF, but also on model systems, clearly show that the structural preference for complex 1a is controlled by the presence and coordination of THF molecules. Contrary to the exclusive formation of the tetranuclear dihydride, hydrogenolysis of the bulky aryloxy yttrium dialkyl, Y(OAr*)(CH₂SiMe₃)₂(THF)₂ (2) (Ar* = 3,5-di-tert-butylphenyl) gave a mixture of the analogous tetranuclear 2a and trinuclear, [Y₃(OAr*)₄H₅(THF)₄], polyhydride, 2b. Similar results, i.e., a mixture of tetra-/tri-nuclear products, were obtained from hydrogenolysis of the even bulkier Y(OAr^Ad2,Me)(CH₂SiMe₃)₂(THF)₂ compound. Experimental conditions were established to optimize the production of either the tetra- or trinuclear products. X-ray structure of 2b revealed a triangular array of three yttrium atoms with two face-capping μ₃-H and three edge-bridging μ₂-H hydrides, with one yttrium bonded to two aryloxy ligands while the other two have a complement of one aryloxy and two THF ligands; the solid-state structure is close to being C₂ symmetric, with the C₂ axis running through the unique Y and unique μ₂-H hydride. As opposed to 2a, which shows distinct ¹H NMR resonances for μ₃/ μ₂-H (δ = 5.83/6.35 ppm, respectively), no hydride signals for 2b were observed at room temperature, indicating hydride exchange on the NMR time scale. Their presence and assignment were secured at -40 °C from ¹H SST (spin saturation) experiment.

Insights into substitution strategy towards thermodynamic and property regulation of chemically recyclable polymers

The development of chemically recyclable polymers serves as an attractive approach to address the global plastic pollution crisis. Monomer design principle is the key to achieving chemical recycling to monomer. Herein, we provide a systematic investigation to evaluate a range of substitution effects and structure-property relationships in the ɛ-caprolactone (CL) system. Thermodynamic and recyclability studies reveal that the substituent size and position could regulate their ceiling temperatures (T_c). Impressively, M4 equipped with a tert-butyl group displays a T_c of 241 °C. A series of spirocyclic acetal-functionalized CLs prepared by a facile two-step reaction undergo efficient ring-opening polymerization and subsequent depolymerization. The resulting polymers demonstrate various thermal properties and a transformation of the mechanical performance from brittleness to ductility. Notably, the toughness and ductility of P(M13) is comparable to the commodity plastic isotactic polypropylene. This comprehensive study is aimed to provide a guideline to the future monomer design towards chemically recyclable polymers.

Calixarene-Metal Complexes in Lactide Polymerization: The Story so Far

Polylactide synthetic procedures have lately gained attention, possibly due to their biocompatibility and the environmental problems associated with fossil-fuel-based polymers. Polylactides can be obtained from natural sources such as cassava, corn, and sugar beet, and polylactides can be manufactured in a laboratory using a variety of processes that begin with lactic acid or lactide. One of the most effective synthetic pathways is through a Lewis acid catalyzed ring-opening polymerization of lactides to obtain a well-defined polymer. In this regard, calixarenes, because of their easy functionalization and tunable properties, have been widely considered to be a suitable 3D molecular scaffold for new metal complexes that can be used for lactide polymerization. This review summarizes the progress made in applying some metal-calixarene complexes in the ring-opening polymerization of lactide.

Defining Stereochemistry in the Polymerization of Lactide by Aluminum Catalysts: Insights into the Dual-Stereocontrol Mechanism

Aspects of the proposed pathway combining chain-end and enantiomorphic site control for the stereospecific polymerization of lactide (LA) were investigated through studies of aluminum complexes supported by enantiopure and racemic bipyrrolidine-based salan ligands, Lig¹AlOBn and Lig²AlOBn. Spectroscopic analysis of stoichiometric initiation reactions and the definition of the stereochemistry of the selective formation of the "match" single-insertion products by X-ray crystallography led to key conclusions about the observed stereocontrol. Notably, it was determined to rely heavily on the preference for the trio of stereocenters around the metal to have a "match" formation (RR-ligand + S-polymer), which works synergistically with the enantiomorphic site preference of the catalyst to ring-open next to a stereocenter of a monomer of the same chirality as that of the ligand, resulting in highly heterotactic or syndiotactic PLA from rac- or meso-LA, respectively.

Effect of Chain Stereoconfiguration on Poly(3-hydroxybutyrate) Crystallization Kinetics

Poly(3-hydroxybutyrate) (PHB) is naturally accumulated by bacteria but can also be synthesized chemically. Its processability is limited, as it tends to degrade at temperatures above its melting temperature; hence, investigation into crystallization kinetics and morphology of PHB materials of both natural and synthetic origins is of great need and interest to get a better understanding of structure-property relationship. Accordingly, this contribution reports a first study of the crystallization and morphology of synthetic PHB materials of different molecular weights. These synthetic PHBs are racemic mixtures (50/50 mol %) of R and S chain configurations and are compared with an enantiopure bacterial R-PHB. Nonisothermal and isothermal crystallization studies show that R and S chains of PHB can cocrystallize in the same unit cell as the R-PHB. Most significantly, the results show that the presence of S chains decreases the overall crystallization rate, which could enhance the processability and industrialization of PHB-based materials.

Zirconium Complexes with Bulkier Amine Bis(phenolate) Ligands and Their Catalytic Properties for Ethylene (Co)polymerization

A series of new zirconium complexes bearing bulkier amine bis(phenolate) tetradentate ligands, Me₂NCH₂CH₂N{CH₂(2-O-3-R-5-^tBu-C₆H₂)}₂ZrCl₂ [R = CPhMe₂ (1); CMePh₂ (2); CPh₃ (3); Ph (4); 3,5-Me₂C₆H₃ (5); 3,5-^tBu₂C₆H₃ (6); 4-^tBuC₆H₄ (7)], were synthesized and characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR, and elemental analyses. The molecular structures of complexes 1 and 3 were determined by single-crystal X-ray diffraction analysis. The X-ray crystallography analysis reveals that these complexes display a slightly distorted octahedral geometry around their metal centers. Upon activation with methylaluminoxane (MAO), dry-MAO, MAO/butylated hydroxytoluene (BHT), or AlⁱBu₃/CPh₃B(C₆F₅)₄, these zirconium complexes exhibit high catalytic activity for ethylene polymerization [up to 1.07 × 10⁷ g PE (mol Zr)^-1 h^-1] and ethylene/1-hexene copolymerization [up to 2.78 × 10⁷ g polymer (mol Zr)^-1 h^-1], affording (co)polymers with moderate to high molecular weights and good comonomer incorporations. The zirconium complexes with bulkier R groups show higher catalytic activities and longer lifetimes and produce polymers with higher molecular weights, while the zirconium complexes with aryls as R groups demonstrate relatively good comonomer incorporation ability for the copolymerization reactions. These catalytic systems also show moderate catalytic activities for the polymerization reactions of propylene, 1-hexene, and 1-decene. Upon activation with MAO, the zirconium complexes also show moderate catalytic activities for the copolymerization reaction of ethylene with 3-buten-1-ol (treated with 1 equiv of AlⁱBu₃), affording copolymers with the incorporation of 3-buten-1-ol up to 1.05%.

The versatile roles of neutral donor ligands in tuning catalyst performance for the ring-opening polymerization of cyclic esters

The use of neutral donor ligands is an effective strategy to modify catalyst structure and performance in the synthesis of sustainable polymers through the ring-opening polymerization (ROP) of cyclic esters.

Combining high activity with broad monomer scope: indium salan catalysts in the ring-opening polymerization of various cyclic esters

An indium salan-type catalyst shows very high activities in the ring-opening polymerization of various cyclic esters, including β-butyrolactone, γ-butyrolactone, lactide, ε-caprolactone and ε-decalactone.

Access to high-molecular-weight poly(γ-butyrolactone) by using simple commercial catalysts

The simple commercial organomagnesium catalysts were utilized for efficient access to high-molecular-weight poly(γ-butyrolactone) and facile manipulation of the reaction conditions enabled the polymer topology controlled.

Biobased High-Performance Aromatic-Aliphatic Polyesters with Complete Recyclability

The development of high-performance recyclable polymers represents a circular plastics economy to address the urgent issues of plastic sustainability. Herein, we design a series of biobased seven-membered-ring esters containing aromatic and aliphatic moieties. Ring-opening polymerization studies showed that they readily polymerize with excellent activity (TOF up to 2.1 × 10⁵ h^-1) at room temperature and produce polymers with high molecular weight (M_n up to 438 kg/mol). The variety of functionalities allows us to investigate the substitution effect on polymerizability/recyclability of monomers and properties of polymers (such as T_gs from -1 to 79 °C). Remarkably, a stereocomplexed P(M2) exhibited significantly increased T_m and crystallization rate. More importantly, product P(M)s were capable of depolymerizing into their monomers in solution or bulk with high efficiency, thus establishing their circular life cycle.

Lactide polymerization using a sterically encumbered, flexible zinc complex

4-(tert-Butyl)-2-trityl-6-(di-(2-picolyl)amine)phenol, LH, was prepared from paraformaldehyde, 4-(tert-butyl)-2-tritylphenol and di-(2-picolyl)amine. Reaction with Zn(N(SiMe3)2)2 gave LZnN(SiMe3)2. The complex was shown by X-ray diffraction study, variable temperature NMR and DFT calculations to coordinate only one pyridine ligand, which allows for fast and facile complex isomerisation. LZnN(SiMe3)2 was active in rac-lactide polymerization, but in contrast to previous complexes of this type did not show any evidence for isotactic monomer enchainment via a catalytic-site mediated chain-end control mechanism. Addition of alcohol led to increased activity, but the complex was unstable in the presence of free alcohol.

Highly Active Homoleptic Zinc and Magnesium Complexes Supported by Constrained Reduced Schiff Base Ligands for the Ring-Opening Polymerization of Lactide

New homoleptic zinc and magnesium complexes containing constrained reduced Schiff base ligands based on substituted 7-hydroxy-1-indanone were successfully synthesized and used as a catalyst for the polymerization of lactide. The ligands contain a side arm having different basicity because dimethylamino, pyridyl, and furfuryl groups are shown to greatly affect the polymerization rates. The homoleptic zinc complex containing constrained reduced Schiff base ligands and a dimethylamino side arm was highly active, giving a 92% conversion of l-lactide in 3 min using [LA]:[Zn]:[BnOH] = 500:1:2 at room temperature. The polymerization is pseudo-first-order dependent on the LA concentration. Well-controlled and living behavior of the zinc complex was observed and demonstrated in the preparation of stereodiblock and triblock copolymers of l-, d-, and rac-lactide in a one-pot sequential synthesis with a predictable block length, block sequence, and narrow dispersity rapidly in 10 min. Stereocomplex formation was observed for PLA made sequentially from 100 l-LA, 100 rac-LA, and 100 d-LA having a high T_m of up to 220 °C.

Collaboration between Trinuclear Aluminum Complexes Bearing Bipyrazoles in the Ring-Opening Polymerization of ε-Caprolactone

Trinuclear aluminum complexes bearing bipyrazoles were synthesized, and their catalytic activity for ε-caprolactone (CL) polymerization was investigated. D^Bu₂Al₃Me₅ exhibited higher catalytic activity than did the dinuclear aluminum complex L^Bu₂Al₂Me₄ (16 times as high for CL polymerization; [CL]:[D^Bu₂Al₃Me₅]:[BnOH] = 100:0.5:5, [D^Bu₂Al₃Me₅] = 10 mM, conversion 93% after 18 min at room temperature). Density functional theory calculations revealed a polymerization mechanism in which CL first approached the central Al atom and then moved to an external Al. The coordinated CL ring was opened because the repulsion of two tert-butyl groups on the ligands pushed an alkoxide initiator on an external Al to initiate CL. In these trinuclear Al catalysts, the central Al plays a role in monomer capture and then collaborates with the external Al to activate CL, accelerating polymerization.

Phosphasalalen Rare-Earth Complexes for the Polymerization of rac-Lactide and rac-β-Butyrolactone

A series of new phosphasalalen pro-ligands, analogues of salalen but with an iminophosphorane replacing the imine functionality, and their corresponding rare-earth alkoxide and siloxide complexes were synthesized. The multinuclear NMR spectra and X-ray diffraction analyses revealed that, for the tert-butoxide and ethoxide complexes, the resulting phosphasalalen rare-earth product was composed of a mononuclear alkoxide and a binuclear complex containing bridged alkoxo and hydroxo groups, while an analogous binuclear complex was isolated as the sole product for the siloxide complex. All the complexes could catalyze the heteroselective ring-opening polymerization (ROP) of rac-lactide (P_r up to 0.77) with high catalytic activities and a controlled polydispersity. Remarkably, the yttrium and lutetium phosphasalalen complexes could also efficiently catalyze the ROP of rac-β-butyrolactone to produce syndiotactic polymers (P_r up to 0.73) while their salalen analogues were inert, revealing the special effects of the iminophosphorane moiety. Detailed end-group analyses and kinetic investigations suggested that the alkoxo-hydroxo-bridged complexes maintained their binuclear structures in the polymerization.

Stereoselective polymerization of rac-lactide catalyzed by zwitterionic calcium complexes

Two zwitterionic calcium complexes L¹CaN(SiMe₃)₂(THF) (1) and L²CaN(SiMe₃)₂ (2) via protolysis reaction were synthesized. At −75 °C, 1 gave a heterotactic sequence enriched polylactide, whilst 2 produced an isotactic sequence enriched polymer.

Strategies for the synthesis of block copolymers with biodegradable polyester segments

Oxygenated block copolymers with biodegradable polyester segments can be prepared in one-pot through sequential or simultaneous addition of monomers. This review highlights the state of the art in this area.

Synthesis, structures, and catalytic efficiency in ring opening polymerization of rac-lactide with tridentate vs. bidentate cobalt(ii), zinc(ii), and cadmium(ii) complexes containing N-substituted N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amine ligands

A series of Co(ii), Zn(ii), and Cd(ii) complexes supported by 1-(3,5-dimethyl-1H-pyrazol-1-yl)-N-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-N-(furan-2-ylmethyl)methanamine (L_A) and N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-isopropylaniline (L_B) were synthesized. The direct chelation of CoCl₂·6H₂O, ZnCl₂, and CdBr₂·4H₂O by the ligands produced [L_nMX₂] (L_n = L_A or L_B; M = Zn or Co, with X = Cl; M = Cd, with X = Br) complexes in high yields. Structural studies revealed that [L_BCoCl₂] and [L_BZnCl₂] adopted distorted tetrahedral geometries, as L_B coordinated the metal centers in a bidentate fashion, while L_A coordinated the metal centers in a tridentate fashion through the nitrogen atoms of the pyrazole and amine moieties, so that [L_ACoCl₂] and [L_AZnCl₂] exhibited trigonal bipyramidal geometries and [L_ACdBr₂] a square pyramidal geometry. [L_BCdBr₂] has two Cd-containing structures per unit cell, whereby one Cd center adopted a distorted tetrahedral geometry and the other exhibited square bipyramidal geometry. The in situ-generated alkyl derivatives of the synthesized complexes were assessed in the ring-opening polymerization of rac-lactide. Heterotactic polylactides (PLAs) were furnished with all complexes. The [L_BZnCl₂]/MeLi system produced PLA with a superior heterotactic bias (P_r up to 0.94) at −25 °C. PLAs with wide-ranging polydispersity indices (1.16–2.23) and low molecular weights were produced in all cases, irrespective of the specific M(II) center and ancillary ligand utilized.

Co(ii), Zn(ii), and Cd(ii) complexes supported by bis-pyrazolyl ligands were applied to the ring-opening polymerization of rac-lactide to produce heterotactic polylactides (PLAs) with superior heterotactic bias i.e. P_r up to 0.94 at −25 °C.

Active Ga-catalysts for the ring opening homo- and copolymerization of cyclic esters, and copolymerization of epoxide and anhydrides

A series of gallium complexes L12Ga4Me8 (1), L22Ga4Me8 (2), and L32Ga4Me8 (3) was synthesized by reaction of GaMe3 with Schiff base ligands L1-3H2 (L1H2 = 2,4-di-tert-butyl-6-{[(3-hydroxypropyl)imino]methyl}phenol; L2H2 = 2,4-dichloro-6-{[(3-hydroxypropyl)imino]methyl}phenol; L3H2 = 4-tert-butyl-2-{[(3-hydroxypropyl)imino]methyl}phenol) and characterized by 1H, 13C NMR, IR spectroscopy, elemental analysis and single crystal X-ray analysis (1, 2), proving their tetranuclear structure in the solid state. Complexes 1-3 showed good catalytic activity in the ring opening homopolymerization (ROP) and ring opening copolymerization (ROcoP) of lactide (LA) and ε-caprolactone (ε-CL) in the presence of benzyl alcohol (BnOH) in toluene at 100 °C, yielding polymers with the expected average molecular weights (Mn) and narrow molecular weight distributions (MWD), as well as a high isoselectivity for the ROP of rac-lactide (rac-LA), yielding isotactic-enriched PLAs with Pm values up to 0.78. Kinetic studies with complex 1 proved the first order dependence on monomer concentration, while mechanistic studies confirmed the coordination insertion mechanistic (CIM) pathway. Sequential addition of monomers gave well defined diblock copolymers of PCL-b-PLLA and PLLA-b-PCL, proving the living character of the polymerization reactions. The catalysts also showed perfect selectivity for the copolymerization of cyclohexene oxide (CHO) with both succinic anhydride (SA) and maleic anhydride (MA) in the presence of BnOH and produced >99% alternating block copolymers.

Biodegradable Polyhydroxyalkanoates by Stereoselective Copolymerization of Racemic Diolides: Stereocontrol and Polyolefin-Like Properties

Bacterial polyhydroxyalkanoates (PHAs) are a unique class of biodegradable polymers because of their biodegradability in ambient environments and structural diversity enabled by side-chain groups. However, the biosynthesis of PHAs is slow and expensive, limiting their broader applications as commodity plastics. To overcome such limitation, the catalyzed chemical synthesis of bacterial PHAs has been developed, using the metal-catalyzed stereoselective ring-opening (co)polymerization of racemic cyclic diolides (rac-8DL^R , R=alkyl group). In this combined experimental and computational study, polymerization kinetics, stereocontrol, copolymerization characteristics, and the properties of the resulting PHAs have been examined. Most notably, stereoselective copolymerizations of rac-8DL^Me with rac-8DL^R (R=Et, Bu) have yielded high-molecular-weight, crystalline isotactic PHA copolymers that are hard, ductile, and tough plastics, and exhibit polyolefin-like thermal and mechanical properties.

Lutetium and yttrium complexes supported by an anilido-oxazoline ligand for polymerization of 1,3-conjugated dienes and ε-caprolactone

Lutetium and yttrium complexes supported by an anilido-oxazoline ligand exhibit highcis-1,4 stereoselectivity for 1,3-conjugated diene polymerization and high activity for ring-opening polymerization of ε-caprolactone.

Application of Diethylzinc/propyl Gallate Catalytic System for Ring-Opening Copolymerization of rac-Lactide and ε-Caprolactone

Biodegradable polyesters gain significant attention because of their wide potential biomedical applications. The ring-opening polymerization method is widely used to obtain such polymers, due to high yields and advantageous properties of the obtained material. The preparation of new, effective, and bio-safe catalytic systems for the synthesis of biomedical polymers is one of the main directions of the research in modern medical chemistry. The new diethylzinc/propyl gallate catalytic system was first used in the copolymerization of ε-caprolactone and rac-lactide. In this paper, the activity of the new zinc-based catalytic system in the copolymerization of cyclic esters depending on the reaction conditions was described. The microstructure analysis of the obtained copolyesters and their toxicity studies were performed. Resulted copolyesters were characterized by low toxicity, moderate dispersity (1.19–1.71), varying randomness degree (0.18–0.83), and average molar mass (5300–9800 Da).

Tailor-made block copolymers of l-, d- and rac-lactides and ε-caprolactone via one-pot sequential ring opening polymerization by pyridylamidozinc(ii) catalysts

Three-coordinated Zn(ii) complexes bearing sterically encumbered bidentate monoanionic [N,N -] pyridylamido ligands efficiently catalyze the ring opening polymerization of lactide (LA) and ε-caprolactone (CL). Owing to the polymerization controlled nature and high rate, precise stereodiblock poly(LLA-b-DLA) with different block lengths can be easily produced by one-pot sequential monomer addition at room temperature in short reaction times. NMR, SEC and DSC analyses confirm the production of highly isotactic diblock copolymers which crystallize in the high melting stereocomplex phase. Stereo-triblock and tetrablock copolymers of l-LA, d-LA and rac-LA have been synthesized similarly. Finally, a diblock poly(CL-b-LA) has been easily obtained by sequential addition of ε-caprolactone and lactide under mild conditions.

Packaging materials with desired mechanical and barrier properties and full chemical recyclability

Plastics have become indispensable in modern life and the material of choice in packaging applications, but they have also caused increasing plastic waste accumulation in oceans and landfills. Although there have been continuous efforts to develop biodegradable plastics, the mechanical and/or transport properties of these materials still need to be significantly improved to be suitable for replacing conventional plastic packaging materials. Here we report a class of biorenewable and degradable plastics, based on copolymers of γ-butyrolactone and its ring-fused derivative, with competitive permeability and elongation at break compared to commodity polymers and superior mechanical and transport properties to those of most promising biobased plastics. Importantly, these materials are designed with full chemical recyclability built into their performance with desired mechanical and barrier properties, thus representing a circular economy approach to plastic packaging materials.

Rare-earth/zinc heterometallic complexes containing both alkoxy-amino-bis(phenolato) and chiral salen ligands: synthesis and catalytic application for copolymerization of CO2 with cyclohexene oxide

Ten rare-earth/zinc heterometallic complexes were synthesized and their catalytic application for copolymerization of CO₂ with cyclohexene oxide was explored.

Highly active rare-earth metal catalysts for heteroselective ring-opening polymerization of racemic lactide

Rare-earth metal complexes usually exhibit high activities in the ring-opening polymerization (ROP) of lactide, yet only a few scandium complexes have shown satisfactory activity. Herein, we report the synthesis of a series of chiral anilido-oxazoline-supported scandium and yttrium complexes that exhibit high activity in the ROP of racemic lactide (rac-LA). Complexes La-f-Ln(CH2SiMe3)2THF (La-f = 2-(2,6-R2PhN)-phenyl-4-(S)-R'-oxazoline; for 1a-f: L = La-f, Ln = Sc; for 2a-d: L = La-d, Ln = Y) were synthesized via the convenient one-pot reaction of Ln(CH2SiMe3)3(THF)2 (Ln = Sc, Y) with the corresponding proligands. The crystal structures of 1a, 1d, 1e, and 1f were isostructural, adopting a distorted trigonal bipyramidal configuration. Sc complexes 1 showed outstanding activity in the ROP of rac-LA with heteroselectivity. TOFs of up to 720 h-1 and 2910 h-1 were obtained in THF at room temperature and toluene at 60 °C, respectively. To our knowledge, these are the highest activities reported for Sc systems. Y complexes 2 showed higher activity and heteroselectivity than the Sc complexes, with TOFs of up to 1176 h-1 in THF at room temperature. Compared with the ortho-substituent on the anilido moiety, the bulky substituent at the chiral center of the oxazoline ring had a greater effect on controlling the heteroselectivity.