Dipodal Ferrocene-Based Adsorbate Molecules for Self-Assembled Monolayers on Gold

Formation of iron(iii)–thiolate metallocyclophane using a ferrocene-based bis-isocyanide

Ferrocene-based iron–thiolate complexes are reported, and the kinetic product transforms to its corresponding thermodynamic product by the chelating effect of Fc(NC)₂.

Synthesis and characterization of 1'-(diphenylphosphino)-1-isocyanoferrocene, an organometallic ligand combining two different soft donor moieties, and its Group 11 metal complexes

The development of a practical synthesis of 1'-(diphenylphosphino)-1-aminoferrocene (2) and its P-borane adduct (2B) allowed the facile preparation of 1'-(diphenylphosphino)-1-isocyanoferrocene (1). This compound combining two specific soft-donor moieties was studied as a ligand for univalent Group 11 metal ions. The reactions of 1 with AgCl at 1 : 1 and 2 : 1 molar ratios only led to the coordination polymer [Ag₂(μ-Cl)₂(μ(P,C)-1)]_n (6), while those with Ag[SbF₆] provided the dimer [Ag₂(Me₂CO-κO)₂(μ(P,C)-1)₂][SbF₆]₂ and the quadruply-bridged disilver complex [Ag₂(μ(P,C)-1)₄][SbF₆]₂ (8), respectively. Addition of 1 to [AuCl(tht)] (tht = tetrahydrothiophene) afforded the mono- and the digold complex, [AuCl(1-κP)] (9) and [(μ(P,C)-1)(AuCl)₂] (10), depending on the reaction stoichiometry. Finally, the reaction of 1 with [Au(tht)₂][SbF₆] or halogenide removal from 9 with AgNTf₂ led to cationic dimers [Au₂(μ(P,C)-1)₂]X₂ (11, X = SbF₆ (a) or NTf₂ (b)). Catalytic tests in the Au-mediated isomerization of (Z)-3-methylpent-2-en-4-yn-1-ol to 2,3-dimethylfuran revealed that 11a and 11b are substantially less catalytically active than their analogues containing 1'-(diphenylphosphino)-1-cyanoferrocene as the ligand, most likely due to a stronger coordination of the isonitrile moiety, which prevents dissociation of the dimeric complexes into catalytically active monomeric species.

Onion derived carbon nanodots for live cell imaging and accelerated skin wound healing

Nitrogen, sulfur, and phosphorous co-doped water-soluble carbon nanodots are synthesized from culinary waste onion peel powder (OPP) by a short microwave treatment. Onion Derived Carbon Nano Dots (OCND) that comprised hydrophilic group-decorated amorphous nano-dots exhibited bright, stable fluorescence at an excitation of 450 nm and emission wavelength at 520 nm along with a free radical scavenging property. The OCND exhibited excellent stability at different pH and UV exposure. Although extracted polyphenols degraded in the extract, interestingly it was shown to be cytocompatible and blood compatible as observed during cytotoxicity, fluorescence imaging of the cell and a hemolysis study. The present work not only focuses on the synthesis of OCND from the OPP extract but also provides an interesting fact that, even after the degradation of polyphenols in the extract, they are non-toxic to human cells (HFF & MG63) and RBCs. Moreover, OCND had no adverse effect on the migration rate of Human Foreskin-derived Fibroblasts (HFFs) as observed from a scratch assay. In addition to accelerating the migration rate of fibroblasts, the OCND altered intra- and extracellular reactive oxygen species (ROS) by enhancing the antioxidant mechanism of a fibroblast under oxidative stress. Further, OCND was observed to accelerate wound healing in a full thickness (FT) wound in a rat model for topical application, which can be attributed to its radical scavenging potential. In summary, this study leads to a new type of OCND synthesis route, which is inherently co-doped with phosphorous, sulfur and nitrogen and holds a great promise for a myriad of biological applications, including bio-imaging, free radical scavenging and wound healing.

Charge Transport through Ferrocene 1,1'-Diamine Single-Molecule Junctions

The charge transport through ferrocene 1,1'-diamine (FDA) molecules between gold electrodes is investigated using the mechanically controllable break junction technique combined with a theoretical framework of density functional theory simulations to understand the physics of these molecular junctions. The characteristic conductances of the molecule are measured at low bias as well as current-voltage (IV) characteristics. By fitting the IV characteristics to the single-level model, the values for the position of the molecular level, mainly responsible for the transport, and its coupling to the leads, are obtained. The influence of the binding sites, molecular conformation, and electrode distance are systematically studied from a theoretical perspective. While a strong dependence of conductance on the adsorption geometry is found, the decrease of conductance as a function of electrode distance arises mainly from a decrease of coupling strength of the molecular electronic orbitals through a reduced overlap and, to a lesser extent, from a shift of their alignment with respect to the Fermi energy.

Self-assembled monolayers on gold of β-cyclodextrin adsorbates with different anchoring groups

We designed multivalent β-cyclodextrin-based adsorbates bearing different anchoring groups aiming to yield stable monolayers with improved packing and close contact of the cavity to the gold surface. Toward this end the primary rim of the β-cyclodextrin was decorated with several functional groups, namely iodide, nitrile, amine, isothiocyanate, methyl sulfide, and isocyanide. Monolayers formed by these adsorbates were characterized by contact angle measurements, surface plasmon resonance spectroscopy, polarization modulation infrared reflection adsorption spectroscopy, X-ray photoelectron spectroscopy, and electrochemistry. The nature of the anchoring group influenced the adsorption kinetics, thickness, layer stability, number of anchoring groups bounded to the surface, and packing in the resulting monolayers. Therefore, chemical manipulation of multivalent adsorbates can be used to modify the properties of their monolayers.

Avoiding problem reactions at the ferrocenyl-alkyne motif: a convenient synthesis of model, redox-active complexes for molecular electronics

A much improved route to 1,1′-bis(arylethynyl)ferrocenes comprising accessible thiolates on the aryl ring is reported. Unanticipated reactions between AcCl, TBAF–BBr₃ and ferrocenyl-alkynes are also discussed, offering a rationale for previous synthetic difficulties.

Molecular suction pads: self-assembled monolayers of subphthalocyaninatoboron complexes on gold

Subphthalocyaninatoboron complexes with six long-chain alkylthio substituents in their periphery are applicable for the formation of self-assembled monolayers (SAMs) on gold. Such films are prepared from solution with the axially chlorido-substituted derivatives and characterised by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results are in accord with the formation of SAMs assembled by the chemisorption of both covalently bound thiolate-type as well as coordinatively bound thioether units. The adsorbate molecules adopt an essentially flat adsorption geometry on the substrate, resembling a suction pad on a surface.

Zwitterionic dithiocarboxylates derived from N-heterocyclic carbenes: coordination to gold surfaces

The zwitterionic dithiocarboxylates 1(+)-CS(2)(-)-4(+)-CS(2)(-) were prepared by reacting the corresponding N-heterocyclic carbenes 1,3-bis(2,6-diisoproylphenyl)imidazol-2-ylidene (1), 1,3-diisopropylimidazol-2-ylidene (2), 1,3-dibenzylimidazol-2-ylidene (3) and 1,3-diethylbenzimidazol-2-ylidene (4) with CS(2). In the latter two cases, the corresponding N-heterocylic carbene was generated in situ. Compounds 2(+)-CS(2)(-)-4(+)-CS(2)(-) were structurally characterised by single-crystal X-ray diffraction studies. The chemisorption of these zwitterionic dithiocarboxylates on solid gold substrates was investigated in situ and in real time by optical second harmonic generation (SHG). The resulting thin films were exemplarily characterised by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) in the case of 1(+)-CS(2)(-) and 2(+)-CS(2)(-), revealing the formation of almost contamination-free self-assembled monolayers, which exhibit a remarkable degree of orientational order.

Dithienylcyclopentene-functionalised subphthalocyaninatoboron complexes: photochromism, luminescence modulation and formation of self-assembled monolayers on gold

Subphthalocyaninatoboron (SubPc) complexes bearing six peripheral n-dodecylthio substituents and an apical photochromic dithienylperfluorocyclopentene unit were prepared. The photoinduced isomerisation of the apical substituent from the open to the ring-closed form significantly influences the photoluminescence of the covalently attached SubPc unit, which is more efficiently quenched by the ring-closed form. Films on gold were fabricated from these multifunctional conjugates and characterised by near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS). The results are in accord with the formation of self-assembled monolayers based on dome-shaped SubPc-based anchor groups. Their chemisorption is primarily due to the peripheral n-dodecylthio substituents, giving rise to covalently attached thiolate as well as coordinatively bound thioether units, whose alkyl chains are in an almost parallel orientation to the surface.

Phthalocyaninato complexes with peripheral alkylthio chains: disk-like adsorbate species for the vertical anchoring of ligands on gold surfaces

Thin metalorganic films were prepared on gold by self-assembly of thioether-functionalised phthalocyaninato complexes from solution. The phthalocyaninato ligands used contain eight peripheral, β-positioned, alkylthio substituents SR (1a: R = n-C(8)H(17), 1b: R = n-C(12)H(25)), which serve as headgroups for surface binding and promote lateral assembly, while the disk-like phthalocyaninato core offers the scope for the attachment of axial ligands to the adsorbed molecules. This process was mimicked by coordination of pyridine (Py) to [Zn(1a)] and [Zn(1b)], respectively. The crystal structures of the products [Zn(1a)(Py)] and [Zn(1b)(Py)] were determined. The crystal structures of 4,5-bis(octylthio)phthalodinitrile and 4,5-bis(dodecylthio)phthalodinitrile were also determined. The films fabricated from [Mn(1a)Cl] and [Mn(1b)Cl] on gold were characterised by XPS, ToF-SIMS and NEXAFS spectroscopy, which revealed the presence of well-defined and homogeneous self-assembled monolayers (SAMs), whose constituents are bound to the substrate by thioether-gold linkages. The orientation of the macrocycles is predominantly parallel to the surface. Strong electronic interaction of the manganese(III) centre with the substrate leads to Cl loss upon adsorption and its reduction to Mn(II).

Adamantane-Based Tripodal Thioether Ligands Functionalized with a Redox-Active Ferrocenyl Moiety for Self-Assembled Monolayers

Self-assembled monolayers (SAMs) can decorate surfaces with `smart´ functional units possessing reversible stimulus-response behavior for optical, thermal, magnetic or redox-chemical stimuli. An independent performance of individual functional groups in such a film is desirable, which can be, in particular, ensured by fairly large lateral separations between tailgroups in the SAM. Adsorbate molecules with multiple attachment points are very promising in this context owing to their large surface footprint, which covers a surface area exceeding the lateral dimensions of the functional groups. To address these design constraints, novel tridentate long-chain tripodal thioether ligands with central adamantine units and a redox-active ferrocenyl tailgroup, 1-[4-(ferrocenylethynyl)phenyl]-3,5,7-tri[(4-n-octylsulfanyl)phenyl]adamantine (T8) and 1-[4-(ferrocenylethynyl)phenyl]-3,5,7-tri[(4-n-dodecylsulfanyl)phenyl]adamantine (T12), were synthesized and used as tripodal adsorbate molecules for the fabrication of redox-active ferrocenyl-terminated SAMs on Au(111). These SAMs were characterized by X-ray photoelectron spectroscopy, near edge X-ray absorption fine structure spectroscopy and sum frequency generation spectroscopy. The data suggest that T8 and T12 form almost contamination-free, well-aligned and fairly densely-packed SAMs on Au(111) with laterally separated ferrocenyl units. The SAMs show a homogeneous binding chemistry, an important requirement for high fidelity SAMs. SFG results indicate lateral interactions between neighboring molecules via the long-chain binding units.

Heterobimetallic metal-complex assemblies constructed from the flexible arm-like ligand 1,1'-bis[(3-pyridylamino)carbonyl]ferrocene: structural versatility in the solid state

The bidentate ferrocenyl sandwich molecule 1,1'-bis[(3-pyridylamino)carbonyl]ferrocene (3-BPFA) has been employed as an organometallic ligand in reactions with a series of transition metal salts to construct heterobimetallic architectures. X-ray crystallographic characterization reveals that the crystal packing of free ligand 3-BPFA induces spontaneous resolution of helical chains via intermolecular hydrogen bonds. By combining the flexibility from the arm-like molecule (3-BPFA) with the variation of the coordination property from different metal ions and/or the different counteranions, five different types of architectures are prepared: one octahedral coordination cage (copper(II) complex 1); two discrete pseudocapsules for combination of chlorine anions (nickel(II) complex 2 and cobalt(II) complex 3); two dimers with metal-metal interactions (silver(I) complexes 4 and 5); one macrocyclic complex (mercury(II) complex 6); and five two-dimensional mixed-metal-organic frameworks (M'-MOFs) (zinc(II), cadmium(II), and mercury(II) complexes 7-11). The structures of all complexes are characterized in detail by IR, elementary analysis, and single-crystal X-ray diffraction analysis. The factors inducing the structure variation among the complexes are discussed by taking account of the coordination geometry of different metal ions, the span angle between the two "arms", and the coordination mode of the 3-BPFA ligand.

Tripodal Binding Units for Self-Assembled Monolayers on Gold: A Comparison of Thiol and Thioether Headgroups

Whereas thiols and thioethers are frequently used as binding units of oligodentate precursor molecules to fabricate self-assembled monolayers (SAMs) on coinage metal and semiconductor surfaces, their use for tridentate bonding configuration is still questionable. Against this background, novel tridentate thiol ligands, PhSi(CH(2)SH)(3) (PTT) and p-Ph-C(6)H(4)Si(CH(2)SH)(3) (BPTT), were synthesized and used as tripodal adsorbate molecules for the fabrication of SAMs on Au(111). These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The PTT and BPTT films were compared with the analogous systems comprised of same tripodal ligands with thioether instead of thiol binding units (anchors). XPS and NEXAFS data suggest that the binding uniformity, packing density, and molecular alignment of the thiol-based ligands in the respective SAMs is superior to their thioether counterparts. In addition, the thiol-based films showed significantly lower levels of contamination. Significantly, the quality of the PTT SAMs on Au(111) was found to be even higher than that of the films formed from the respective monodentate counterpart, benzenethiol. The results obtained allow for making some general conclusions on the specific character of molecular self-assembly in the case of tridentate ligands.