Desmotropy, polymorphism, and solid-state proton transfer: four solid forms of an aromatic o-hydroxy Schiff base

Identification and quantification techniques of polymorphic forms - A review

In the pharmaceutical industry, the unexpected appearance of crystalline forms could impact the therapeutic efficacy of an Active Pharmaceutical Ingredient (API). For quality control, a thorough qualitative and quantitative monitoring of pharmaceutical solid forms is essential to ensure the detection and the quantification of crystalline forms, wither different or with the same chemical composition (polymorphs) at a low detection level. The purpose of this paper was to review and highlight the importance of choosing adequate solid-state techniques for detection and quantification APIs that present polymorphism - based on limits of detection (LOD) and quantification (LOQ), pharmacopeias specifications, international guidelines and studies reported in the literature. To this study, the powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Infrared and Raman spectroscopies and solid-state nuclear magnetic resonance (NMR) were the solid-state techniques analyzed. Additionally, the Argentine, Brazilian, British, European, International, Japanese, Mexican and the United States of America pharmacopeias were reviewed. Based on the analysis performed, the advantages and disadvantages of these techniques, as well as the LOD and LOQ values of APIs were reported. In comparison to these solid-state techniques, reference material used for identification analyses should be previously identified with the corresponding polymorph. Without this previous procedure, the patterns, the spectra, and DSC curves of the reference material can only be used to confirm the mixture of solid forms, not being able to specify which polymorphs are contained in the sample. A major advantage of PXRD is the use of the calculated diffraction patterns obtained from the Crystallographic Information Frameworks (CIFs) files which could be used as a reference pattern without any other information, assistance technique, or physical standards. Regarding the quantification aspect, different pharmacopeias suggest various methods such as the PXRD combining with Rietveld method, which can be used to obtain lower LOD values for minority phases in the mixture of different substances without the need for a calibration curve. Raman spectroscopy can detect polymorphs in small particles and solid-state NMR spectroscopy is a powerful technique for quantification not only crystalline but also crystalline-amorphous mixtures. Finally, this review intends to be a useful tool to control, with efficiency and accuracy, the polymorphism of APIs in pharmaceutical compounds.

Photo-and thermoresponsive N-salicylideneaniline derivatives: solid-state studies and structural aspects

Eight photo-and/or thermoresponsive salicylideneanilines were obtained by mechanosynthesis under solvent-free conditions and stabilized by external stimuli for their isolations in solid-state. Switching properties of these materials were investigated by various analytical techniques and spectroscopic data.

Using Desmotropes, Cocrystals, and Salts to Manipulate Reactivity in Mechanochemical Organic Reactions

Performing reactions in the solid state offers the largely unexplored possibility of influencing reactivity by manipulating the solid form of the starting reactants. In this work, we explore the use of various solid forms of barbituric acid and its effect on reaction paths and kinetics in a Knoevenagel condensation reaction with vanillin. Modifications of barbituric acid included the use of its desmotrope, a cocrystal, and a salt as the starting reactant. Comparing these reactions with the reaction starting from the commercial keto tautomer of barbituric acid, we find that the reaction kinetics could be accelerated or decelerated, together with a change in the reaction mechanism. Exploring solid forms of reactants can be used as general methodology for manipulating mechanochemical reactivity, further highlighting the benefits of conducting reactions in the solid state, because many of the modifications of solids become unavailable upon dissolution.

Evidence of IR-Induced Chemistry in a Neat Solid: Tautomerization of Thiotropolone by Thermal, Electronic, and Vibrational Excitations

Thiotropolone isolated in argon and xenon matrices (as monomers) or in a neat solid (as the crystalline or amorphous state) at low temperature was found to exist only in the thione-enol form. Visible light irradiation (λ ≥ 400 nm) leads to thione-enol → thiol-keto tautomerization in matrices and under neat solid conditions at 15 K. The assignment of the IR spectra of the two thiotropolone tautomers (thione-enol and thiol-keto) was carried out with the support of B3LYP/6-311+G(2d,p) computations. The thiol-keto form generated in situ in a neat solid was found to tautomerize back to the thione-enol upon annealing up to 100 K. Gaussian-4 (G4) computations estimate that such a tautomerization process has an energy barrier of ∼25 kJ mol^-1, which is consistent with the observations. Moreover, it was found that narrowband IR irradiation of the thiol-keto form in a neat solid, at the frequency of its CH stretching overtones/combination modes, also induces tautomerization to the thione-enol form. Such a result constitutes an important demonstration of vibrationally induced chemistry under neat solid conditions.

Tautomeric Equilibrium of an Asymmetric β-Diketone in Halogen-Bonded Cocrystals with Perfluorinated Iodobenzenes

In order to study the effect of halogen bond on tautomerism in β-diketones in the solid-state, we have prepared a series of cocrystals derived from an asymmetric β-diketone, benzoyl-4-pyridoylmethane (b4pm), as halogen bond acceptor and perfluorinated iodobenzenes: iodopentaflourobenzene (ipfb), 1,2-, 1,3- and 1,4-diiodotetraflorobenzene (12tfib, 13tfib and 14tfib) and 1,3,5-triiodo-2,4,6-trifluorobenzene (135titfb). All five cocrystals are assembled by I···N halogen bonds involving pyridyl nitrogen and iodoperfluorobenzene iodine resulting in 1:1 (four compounds) or 1:2 (one compound) cocrystal stoichiometry. Tautomer of b4pm in which hydrogen atom is adjacent to the pyridyl fragment was found to be more stable in vacuo than tautomer with a benzoyl hydroxyl group. This tautomer is also found to be dominant in the majority of crystal structures, somewhat more abundantly in crystal structures of cocrystals in which additional I···O halogen bond with the benzoyl oxygen has been established. Attempts have also been made to prepare an equivalent series of cocrystals using a closely related asymmetric β-diketone, benzoyl-3-pyridoylmethane (b3pm); however, all attempts were unsuccessful, which is attributed to more effective crystal packing of b3pm isomer compared to b4pm, which reduced the probability of cocrystal formation.

Irbesartan desmotropes: Solid-state characterization, thermodynamic study and dissolution properties

Irbesartan (IBS) is a tetrazole derivative and antihypertensive drug that has two interconvertible structures, 1H- and 2H-tautomers. The difference between them lies in the protonation of the tetrazole ring. In the solid-state, both tautomers can be isolated as crystal forms A (1H-tautomer) and B (2H-tautomer). Studies have reported that IBS is a polymorphic system and its forms A and B are related monotropically. These reports indicate form B as the most stable and less soluble form. Therefore, the goal of this contribution is to demonstrate through a complete solid-state characterization, thermodynamic study and dissolution properties that the IBS forms are desmotropes that are not related monotropically. However, the intention is also to call attention to the importance of conducting strict chemical and in solid-state quality controls on the IBS raw materials. Hence, powder X-ray diffraction (PXRD) and Raman spectroscopy (RS) at ambient and non-ambient conditions, differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FT-IR) and scanning electron microscopy (SEM) techniques were applied. Furthermore, intrinsic dissolution rate (IDR) and structural stability studies at 98% relative humidity (RH), 25 °C and 40 °C were conducted as well. The results show that in fact, form A is approximately four-fold more soluble than form B. In addition, both IBS forms are stable at ambient conditions. Nevertheless, structural and/or chemical instability was observed in form B at 40 °C and 98% RH. IBS has been confirmed as a desmotropic system rather than a polymorphic one. Consequently, forms A and B are not related monotropically.

The Relationship between the Structure and Properties of Amino Acid Ionic Liquids

Ionic liquids based on different l-amino acids (glycine, l-valine, l-leucine, l-isoleucine, l-histidine, l-methionine, l-tyrosine, l-tryptophan, l-arginine, and l-threonine) and different cations (tetrabutylammonium (TBA), tributylmethylammonium (tBMA), didecyldimethylammonium (DDA), (2-hydroxyethyl)trimethylammonium (choline) (Chol), alkyl(C₁₂-C₁₄) dimethylbenzylammonium (benzalkonium) (BA), dodecyltrimethylammonium (DDTMA), hexadecyltrimethylammonium (HDTMA), octadecyltrimethylammonium (ODTMA) and 1-ethyl-3-methylimidazolium (EMIM)) have been synthesized and characterized by NMR and FTIR. Viscosity, specific rotation, surface activity, thermal stability (TG), and phase transformations (DSC) have been determined and compared with available data. Furthermore, benzalkonium, didecyldimethylammonium, dodecyltrimethylammonium, hexadecyltrimethylammonium, and octadecyltrimethylammonium amino acid ionic liquids have been shown to exhibit surface activity. The dissolution of cellulose in amino acid ionic liquids (AAILs) composed of various cations was also investigated. Cellulose was only dissolved in EMIM salts of amino acids. In particular, the influence of the cation type on selected physicochemical and spectroscopic properties were discussed. The article is a mini review on amino acid ionic liquids.

Co-crystallization of a neutral mol-ecule and its zwitterionic tautomer: structure and Hirshfeld surface analysis of 5-methyl-4-(5-methyl-1H-pyrazol-3-yl)-2-phenyl-2,3-di-hydro-1H-pyrazol-3-one 5-methyl-4-(5-methyl-1H-pyrazol-2-ium-3-yl)-3-oxo-2-phenyl-2,3-di-hydro-1H-pyrazol-1-ide monohydrate

The title compound, 2C₁₄H₁₄N₄O·H₂O, comprises a neutral mol-ecule containing a central pyrazol-3-one ring flanked by an N-bound phenyl group and a C-bound 5-methyl-1H-pyrazol-3-yl group (at positions adjacent to the carbonyl substituent), its zwitterionic tautomer, whereby the N-bound proton of the central ring is now resident on the pendant ring, and a water mol-ecule of crystallization. Besides systematic variations in geometric parameters, the two independent organic mol-ecules have broadly similar conformations, as seen in the dihedral angle between the five-membered rings [9.72 (9)° for the neutral mol-ecule and 3.32 (9)° for the zwitterionic tautomer] and in the dihedral angles between the central and pendant five-membered rings [28.19 (8) and 20.96 (8)° (neutral mol-ecule); 11.33 (9) and 11.81 (9)°]. In the crystal, pyrazolyl-N-H⋯O(carbon-yl) and pyrazolium-N-H⋯N(pyrazol-yl) hydrogen bonds between the independent organic mol-ecules give rise to non-symmetric nine-membered {⋯HNNH⋯NC₃O} and {⋯HNN⋯HNC₃O} synthons, which differ in the positions of the N-bound H atoms. These aggregates are connected into a supra-molecular layer in the bc plane by water-O-H⋯N(pyrazolide), water-O-H⋯O(carbon-yl) and pyrazolyl-N-H⋯O(water) hydrogen bonding. The layers are linked into a three-dimensional architecture by methyl-C-H⋯π(phen-yl) inter-actions. The different inter-actions, in particular the weaker contacts, formed by the organic mol-ecules are clearly evident in the calculated Hirshfeld surfaces, and the calculated electrostatic potentials differentiate the tautomers.

Enantiopure Schiff bases of amino acid phenylhydrazides: impact of the hydrazide function on their structures and properties

New chiral Schiff bases have been synthesized and characterized with an important contribution from quantum chemical calculations at the DFT level of theory. They have been evaluated for their physical and biological properties.

Enhanced fluorescence with nanosecond dynamics in the solid state of metal ion complexes of alkoxy salophens

Incorporation of an alkoxy moiety dramatically alters the photophysics and molecular packing of aluminum complexes of salophen leading to enhanced emission in the solid state.

A structural, spectroscopic and theoretical study of an o-vanillin Schiff base derivative involved in enol-imine and keto-amine tautomerism

The potassium salt of the Schiff base derived from o-vanillin and taurine is involved in enol-imine (I) and keto-amine (II) tautomerism. Both tautomeric forms coexist in the crystal and they are stabilized by strong O–H⋯N and O⋯H–N intramolecular hydrogen bonds.

A pair of Schiff base enantiomers studied by absorption, fluorescence, electronic and vibrational circular dichroism spectroscopies and density functional theory calculation

A pair of enantiomeric Schiff bases were synthesized and characterized, in particular their absolute configurations were determined by vibrational circular dichroism spectroscopy.

Phenol-quinone tautomerism in (arylazo)naphthols and the analogous Schiff bases: benchmark calculations

Tautomerization energies of a series of isomeric [(4-R-phenyl)azo]naphthols and the analogous Schiff bases (R = N(CH3)2, OCH3, H, CN, NO2) are calculated by LPNO-CEPA/1-CBS using the def2-TZVPP and def2-QZVPP basis sets for extrapolation. The performance of various density functionals (B3LYP, M06-2X, PW6B95, B2PLYP, mPW2PLYP, PWPB95) as well as MP2 and SCS-MP2 is evaluated against these results. M06-2X and SCS-MP2 yield results close to the LPNO-CEPA/1-CBS values. Solvent effects (CCl4, CHCl3, CH3CN, and CH3OH) are treated by a variety of bulk solvation models (SM8, IEFPCM, COSMO, PBF, and SMD) as well as explicit solvation (Monte Carlo free energy perturbation using the OPLSAA force field).

Photochromic cycle of 2'-hydroxyacetophenone azine studied by absorption and emission spectroscopy in different solvents

This paper reports on the investigations of the synthesized di-(o-hydroxyaryl ketoimine) compound by the steady state absorption and emission techniques as well as picosecond time resolved emission and femtosecond transient absorption methods in different solvents. The results of the experimental observation have been supported by the theoretical DFT and TD-DFT calculations. The theoretical data have revealed the completed influence of the environmental polarity on particular conformers of studied compound. Dependencies between the activation rate constant and polarizability function as well as Kamlet-Abbond-Taft hydrogen-bonding parameter have been obtained in different solvent. The mechanism of photodynamic changes of di-(o-hydroxyaryl ketoimine) is presented.

Structure investigation of intramolecular hydrogen bond in some substituted salicylaldehydes and 4-aminoantipyrine derivatives in solution and in the solid state

Seven imine derivatives obtained by condensation of appropriate aldehydes and salicylaldehydes with 4-aminoantipyrine were investigated in terms of intramolecular hydrogen bond structure. On the base of (1)H, (13)C and (15)N NMR measurements in solution and in the solid state we found out that all compounds which can form such structure exist as OH forms with strong H-bonds to nitrogen atom. The structure conclusions taken from NMR study were confirmed by pKa measurements. Surpassingly, the positions of protons in H-bridges only very slightly depend on the substituents in aldehyde used for condensation and on the phase (solution vs. solid state). The influence of antipyrine moiety seems to be the major factor defining H-bond structure.

Spectroscopic studies of amino acid ionic liquid-supported Schiff bases

Amino acid ionic liquid-supported Schiff bases, derivatives of salicylaldehyde and various amino acids (l-threonine, l-valine, l-leucine, l-isoleucine and l-histidine) have been investigated by means of various spectroscopic techniques (NMR, UV-Vis, IR, MS) and deuterium isotope effects on ¹³C-NMR chemical shifts. The results have shown that in all studied amino acid ionic liquid-supported Schiff bases (except the l-histidine derivative) a proton transfer equilibrium exists and the presence of the COO⁻ group stabilizes the proton transferred NH-form.