Hydrolysis of tetravalent cerium for a simple route to nanocrystalline cerium dioxide: an in situ spectroscopic study of nanocrystal evolution

Electronic-Structure Interpretation: How Much Do We Understand Ce L3 XANES?

Historically, cerium has been attractive for pharmaceutical and industrial applications. The cerium atom has the unique ability to cycle between two chemical states (Ce(III) and Ce(IV)) and drastically adjust its electronic configuration: [Xe] 4f15d16s2 in response to a chemical reaction. Understanding how electrons drive chemical reactions is an important topic. The most direct way of probing the chemical and electronic structure of materials is by X-ray absorption spectroscopy (XAS) or X-ray absorption near-edge structure (XANES) in high energy resolution fluorescence detection (HERFD) mode. Such measurements at the Ce L3 edge have the advantage of a high penetration depth, enabling in-situ reaction studies in a time-resolved manner and investigation of material production or material performance under specific conditions. But how much do we understand Ce L3 XANES? This article provides an overview of the information that can be extracted from experimental Ce L3 XAS/XANES/HERFD data. A collection of XANES data recorded on various cerium systems in HERFD mode is presented here together with detailed discussions on data analysis and the current status of spectral interpretation, including electronic structure calculations.

Globular pattern formation of hierarchical ceria nanoarchitectures

Dissipative structures often appear as an unstable counterpart of ordered structures owing to fluctuations that do not form a homogeneous phase. Even a multiphase mixture may simultaneously undergo one chemical reaction near equilibrium and another one that is far from equilibrium. Here, we observed in real time crystal seed formation and simultaneous nanocrystal aggregation proceeding from CeIV complexes to CeO2 nanoparticles in an acidic aqueous solution, and investigated the resultant hierarchical nanoarchitecture. The formed particles exhibited two very different size ranges, resulting in further pattern formation with opalescence. The hierarchically assembled structures in solutions were CeO2 colloids, viz. primary core clusters (1-3 nm) of crystalline ceria and secondary clusters (20-30 nm) assembled through surface ions. Such self-assembly is widespread in multi-component complex fluids, paradoxically moderating hierarchical reactions. Stability and instability are not only critical but also complementary for co-optimisation around the nearby free energy landscape prior to bifurcation.

Preparation of monodisperse cerium oxide particle suspensions from a tetravalent precursor

Cerium oxide particles are a unique material that enables studying the intersection of metal oxides, f-elements, and nanomaterials. Distinct from diverse applications in catalysis, energy, and medicine, cerium possesses additional influence as a non-radioactive actinide surrogate. Herein, we present a synthesis for sub-micron cerium particles using hexamethylenetetramine and ammonium hydroxide as precipitating agents with a CeIV precursor. The combinatorial homogeneous precipitation approach yields monodisperse and moderately-stable CeO2 particle suspensions in ethanol, as determined by powder X-ray diffraction, scanning electron microscopy, dynamic light scattering, and zeta potential measurements. Various additives may be used to moderate and manipulate the surface charge of the particles. Proof-of-concept electrophoretic deposition of the particles produces a uniform layer of CeO2 on graphite. The synthesis and suspension properties are developed as a methodology towards future controlled actinide hydrolysis and film deposition.

Cerium Nanophases from Cerium Ammonium Nitrate

Ceria nanomaterials with facile CeIII/IV redox behavior are used in sensing, catalytic, and therapeutic applications, where inclusion of CeIII has been correlated with reactivity. Understanding assembly pathways of CeO2 nanoparticles (NC-CeO2) in water has been challenged by "blind" synthesis, including rapid assembly/precipitation promoted by heat or strong base. Here, we identify a layered phase denoted Ce-I with a proposed formula CeIV(OH)3(NO3)·xH2O (x ≈ 2.5), obtained by adding electrolytes to aqueous cerium ammonium nitrate (CAN) to force precipitation. Ce-I represents intermediate hydrolysis species between dissolved CAN and NC-CeO2, where CAN is a commonly used CeIV compound that exhibits unusual aqueous and organic solubility. Ce-I features Ce-(OH)2-Ce units, representing the first step of hydrolysis toward NC-CeO2 formation, challenging prior assertions about CeIV hydrolysis. Structure/composition of poorly crystalline Ce-I was corroborated by a pair distribution function, Ce-L3 XAS (X-ray absorption spectroscopy), compositional analysis, and 17O nuclear magnetic resonance spectroscopy. Formation of Ce-I and its transformation to NC-CeO2 is documented in solution by small-angle X-ray scattering (SAXS) and in the solid-state by transmission electron microscopy (TEM) and powder X-ray diffraction. Morphologies identified by TEM support form factor models for SAXS analysis, evidencing the incipient assembly of Ce-I. Finally, two morphologies of NC-CeO2 are identified. Sequentially, spherical NC-CeO2 particles coexist with Ce-I, and asymmetric NC-CeO2 with up to 35% CeIII forms at the expense of Ce-I, suggesting direct replacement.

The Role of Cerium Valence in the Conversion Temperature of H2Ti3O7 Nanoribbons to TiO2-B and Anatase Nanoribbons, and Further to Rutile

CeO2-TiO2 is an important mixed oxide due to its catalytic properties, particularly in heterogeneous photocatalysis. This study presents a straightforward method to obtain 1D TiO2 nanostructures decorated with CeO2 nanoparticles at the surface. As the precursor, we used H2Ti3O7 nanoribbons prepared from sodium titanate nanoribbons by ion exchange. Two cerium sources with an oxidation state of +3 and +4 were used to obtain mixed oxides. HAADF-STEM mapping of the Ce4+-modified nanoribbons revealed a thin continuous layer at the surface of the H2Ti3O7 nanoribbons, while Ce3+ cerium ions intercalated partially between the titanate layers. The phase composition and morphology changes were monitored during calcination between 620 °C and 960 °C. Thermal treatment led to the formation of CeO2 nanoparticles on the surface of the TiO2 nanoribbons, whose size increased with the calcination temperature. The use of Ce4+ raised the temperature required for converting H2Ti3O7 to TiO2-B by approximately 200 °C, and the temperature for the formation of anatase. For the Ce3+ batch, the presence of cerium inhibited the conversion to rutile. Analysis of cerium oxidation states revealed the existence of both +4 and +3 in all calcined samples, regardless of the initial cerium oxidation state.

Structure of the {U13} polyoxo cluster U13O8Cl x (MeO)38-x (x = 2.3, MeO = methoxide)

The structure of a new type of polyoxo cluster complex that contains thirteen uranium atoms, {U13}, is reported. The complex crystallized from methanol containing tetra-valent uranium (UIV) with a basic organic ligand, and was characterized as di-chloridoocta-cosa-μ2-methano-lato-octa-kis-(methano-lato)octa-μ4-oxido-trideca-uranium, [U13(CH3O)35.7Cl2.3O8] or [U13(μ4-Ooxo)8Cl x (MeO)38-x ] (x = 2.3, MeO = methoxide) (I), by single-crystal X-ray diffraction. The characterized {U13} polyoxo cluster complex (I) possesses a single cubic uranium polyhedron at the centre of the cluster core. To the best of our knowledge, this is the very first example of a polyoxo actinide complex that bears a single cubic polyhedron in its structure. The cubic polyhedron in I is well comparable in shape with those in bulk UO2. The U-O bonds in the cubic polyhedron of I are, however, significantly shorter than those not only in bulk UO2 but also in another analogue in the {U38} cluster. This shortening of U-O bonds, together with BVS calculations and the overall negative charge (2-) of I, suggests that the central uranium atom in I, which forms the single cubic coordination polyhedron, is presumably oxidized to the penta-valent state (UV) from the original tetra-valent state (UIV). Complex I is, hence, the first example of a polyoxo cluster possessing a single cubic coordination polyhedron of UV.

Theoretical Investigation on the Elusive Reaction Mechanism of Spirooxindole Formation Mediated by Cytochrome P450s: A Nascent Feasible Charge-Shift C-O Bond Makes a Difference

Spirooxindoles are pivotal biofunctional groups widely distributed in natural products and clinic drugs. However, construction of such subtle chiral skeletons is a long-standing challenge to both organic and bioengineering scientists. The knowledge of enzymatic spirooxindole formation in nature may inspire rational design of new catalysts. To this end, we presented a theoretical investigation on the elusive mechanism of the spiro-ring formation at the 3-position of oxindole mediated by cytochrome P450 enzymes (P450). Our calculated results demonstrated that the electrophilic attack of CpdI, the active species of P450, to the substrate, shows regioselectivity, i.e., the attack at the C9 position forms a tetrahedral intermediate involving an unusual feasible charge-shift C9^δ+-O^δ- bond, while the attack at the C1 position forms an epoxide intermediate. The predominant route is the first route with the charge-shift bonding intermediate due to holding a relatively lower barrier by >5 kcal mol^-1 than the epoxide route, which fits the experimental observations. Such a delocalized charge-shift bond facilitates the formation of a spiro-ring mainly through elongation of the C1-C9 bond to eliminate the aromatization of the tricyclic beta-carboline. Our theoretical results shed profound mechanistic insights for the first time into the elusive spirooxindole formation mediated by P450s.

The missing pieces of the PuO2 nanoparticle puzzle

The nanoscience field often produces results more mystifying than any other discipline. It has been argued that changes in the plutonium dioxide (PuO₂) particle size from bulk to nano can have a drastic effect on PuO₂ properties. Here we report a full characterization of PuO₂ nanoparticles (NPs) at the atomic level and probe their local and electronic structures by a variety of methods available at the synchrotron, including extended X-ray absorption fine structure (EXAFS) at the Pu L₃ edge, X-ray absorption near edge structure (XANES) in high energy resolution fluorescence detection (HERFD) mode at the Pu L₃ and M₄ edges, high energy X-ray scattering (HEXS) and X-ray diffraction (XRD). The particles were synthesized from precursors with different oxidation states of plutonium (III, IV, and V) under various environmentally and waste storage relevant conditions (pH 8 and pH > 10). Our experimental results analyzed with state-of-the-art theoretical approaches demonstrate that well dispersed, crystalline NPs with a size of ∼2.5 nm in diameter are always formed in spite of diverse chemical conditions. Identical crystal structures and the presence of only the Pu(iv) oxidation state in all NPs, reported here for the first time, indicate that the structure of PuO₂ NPs is very similar to that of the bulk PuO₂. All methods give complementary information and show that investigated fundamental properties of PuO₂ NPs, rather than being exotic, are very similar to those of the bulk PuO₂.

Peering into the Formation of Cerium Oxide Colloidal Particles in Solution by In Situ Small-Angle X-ray Scattering

The formation of CeO₂ colloidal particles upon heating an aqueous solution of (NH₄)₂Ce(NO₃)₆ to 100 °C was investigated by time-resolved in situ SAXS analysis using synchrotron radiation, providing absolute intensity data. In particular, the experiments were performed by applying different temperatures between room temperature and 100 °C as well as under variation of the ionic strength and concentration. Using validated SAXS evaluation tools (SASfit and McSAS software), the analyses revealed the presence of two types of particle populations possessing average dimensions of ca. 2 nm and 5-15 nm, with the latter being agglomerates of the 2 nm particles rather than single crystallites. The analysis revealed not only the changes in the size, but also the relative volume fractions of these two CeO₂ particle populations as a function of the aforementioned parameters. Increasing the temperature increases the number of the 5-15 nm agglomerates on one hand by the enhanced nucleation rate of the primary particles. On the other hand, especially at high temperatures (90 and 100 °C) the larger agglomerate particles precipitate, resulting in interesting trends in the fractions of the two populations as a function of time, temperature, ionic strength, and precursor concentration. The experimental studies are complemented by calculating colloidal interaction energies based on classical DLVO theory. Thereby, this study provides detailed insight into the nucleation, growth, and agglomeration of CeO₂ nanoparticles. The primary objective of this study is to provide a better understanding of the nucleation and growth of particles by the hydrolysis of the tetravalent cerium ion in aqueous solutions.

Synthesis of silver-cerium titanate nanotubes and their surface properties and antibacterial applications

Nano-heterostructures of titanate nanotubes were synthesized and they revealed a complex structure with the formation of TiO₂ (anatase), CeO₂, Ag₂O and metallic silver nanoparticles on the outer walls and intercalation of Ce⁴⁺ and Ag⁺ into the interlayer spaces of the nanotubes by microwave-assisted hydrothermal process and subjected to ion exchange reactions. To the best of our knowledge, this is the first reported silver and cerium co-exchanged titanate nanotubes for bio-applications. The co-ion exchange processes preserved the original tubular structure of titanate nanotubes with significant changes of the superficial as well as interlamellar environment. This study opens up possibility of synthesizing complex, functional nano-heterostructure with the scope of modification of the final structure, especially the amount and oxidation state of the intercalated cation (Ce⁴⁺, Ce³⁺ and Ag⁺) as well as the quantity and variety of the decorating nanoparticles (CeO₂, Ag₂O or metallic Ag). The interplay of which, in turn, can lead to important biological properties and applications, owing to their ion-liberation capacity. The samples were tested in antibacterial activity with two different kind of bacteria (gram positive and negative), cell cytotoxicity and adhesion, and it was found that the nano-heterostructure formed shows high antibacterial activity with low cytotoxicity and high cell adhesion, which makes it a promising material for further health applications.

Hydrolyzed Ce(IV) salts limit sucrose-dependent biofilm formation by Streptococcus mutans

Several studies have focused on the antimicrobial effects of cerium oxide nanoparticles (CeO₂-NP) but few have focused on their effects on bacteria under initial biofilm formation conditions. Streptococcus mutans is a prolific biofilm former contributing to dental caries in the presence of fermentable carbohydrates and is a recognized target for therapeutic intervention. CeO₂-NP derived solely from Ce(IV) salt hydrolysis were found to reduce adherent bacteria by approximately 40% while commercial dispersions of "bare" CeO₂-NP (e.g., 3 nm, 10-20 nm, 30 nm diameter) and Ce(NO₃)₃·6H₂O were either inactive or observed to slightly increase biofilm formation under similar in vitro conditions. Planktonic growth and dispersal assays support a non-bactericidal mode of biofilm inhibition active in the initial phases of S. mutans biofilm production. Human cell proliferation assays suggest only minor effects of hydrolyzed Ce(IV) salts on cellular metabolism at concentrations up to 1 mM Ce, with less observed toxicity compared to equimolar concentrations of AgNO₃. The results presented herein have implications in clinical dentistry.

Giant Radiolytic Dissolution Rates of Aqueous Ceria Observed in Situ by Liquid-Cell TEM

The dynamics of cerium oxide nanoparticle aqueous corrosion are revealed in situ. We use innovative liquid-cell transmission electron microscopy (TEM) combined with deliberate high-intensity electron-beam irradiation of nanoparticle suspensions. This enables life video-recording of materials reactions in liquid, with nm resolution. We introduce image quantification to measure detailed rates of dissolution as a function of time and particle size to be compared with literature data. Giant dissolution rates, exceeding any previous reports for chemical dissolution rates at room temperature by many orders of magnitude, are discovered. The reasons for this accelerated dissolution are outlined, including the importance of the radiolysis of water preceding the ceria attack. Electron-water interaction generates radicals, ions, and hydrated electrons, which assist in hydration and reductive dissolution of oxide minerals. The presented methodology has the potential to become a novel accelerated testing procedure to compare multiple nanoscale materials for relative aqueous durability. The ceria-water system is of crucial importance for the fields of catalysis, abrasive polishing, environmental remediation, and as simulant for actinide oxide behaviour in contact with liquid for nuclear engineering.

Crystallization kinetics of cerium oxide nanoparticles formed by spontaneous, room-temperature hydrolysis of cerium(iv) ammonium nitrate in light and heavy water

Ceria nanocrystals form tenfold more slowly in D₂O vs. H₂O, revealing a rate-determining proton transfer reaction and a non-classical crystallization mechanism.

Oxyhydroxy Silicate Colloids: A New Type of Waterborne Actinide(IV) Colloids

At the near-neutral and reducing aquatic conditions expected in undisturbed ore deposits or in closed nuclear waste repositories, the actinides Th, U, Np, and Pu are primarily tetravalent. These tetravalent actinides (AnIV) are sparingly soluble in aquatic systems and, hence, are often assumed to be immobile. However, AnIV could become mobile if they occur as colloids. This review focuses on a new type of AnIV colloids, oxyhydroxy silicate colloids. We herein discuss the chemical characteristics of these colloids and the potential implication for their environmental behavior. The binary oxyhydroxy silicate colloids of AnIV could be potentially more mobile as a waterborne species than the well-known mono-component oxyhydroxide colloids.

Evidence for an oxygen evolving iron-oxo-cerium intermediate in iron-catalysed water oxidation

The non-haem iron complex α-[Fe(II)(CF3SO3)2(mcp)] (mcp=(N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-cis-diaminocyclohexane) reacts with Ce(IV) to oxidize water to O2, representing an iron-based functional model for the oxygen evolving complex of photosystem II. Here we trap an intermediate, characterized by cryospray ionization high resolution mass spectrometry and resonance Raman spectroscopy, and formulated as [(mcp)Fe(IV)(O)(μ-O)Ce(IV)(NO3)3](+), the first example of a well-characterized inner-sphere complex to be formed in cerium(IV)-mediated water oxidation. The identification of this reactive Fe(IV)-O-Ce(IV) adduct may open new pathways to validate mechanistic notions of an analogous Mn(V)-O-Ca(II) unit in the oxygen evolving complex that is responsible for carrying out the key O-O bond forming step.

Intrinsic formation of nanocrystalline neptunium dioxide under neutral aqueous conditions relevant to deep geological repositories

Simple dilution of an aqueous Np(iv) bicarbonate solution triggers the intrinsic formation of nanocrystalline neptunium dioxide (NpO₂). This new formation route could be a likely scenario in the repository and disposal of radioactive waste.

Optimizing the design and synthesis of supported silver nanoparticles for low cost water disinfection

Silver nanoparticles (AgNPs) were successfully synthesized and impregnated on silica using chemical reduction methods. XPS and Ag K-edge XANES analysis revealed that the impregnation of AgNPs onto silica using a chitosan + sodium borohydride (NaBH4) method results in higher silver loading and Ag(0)/Ag(I) ratio compared to that obtained using NH3 + NaBH4/glucose methods. The effects of the dosage of chitosan on silver loading, Ag(I) release, and bactericidal activities of AgNP-impregnated silica were investigated, with results showing that, at high dosages of chitosan, Ag(I) released from AgNP-impregnated silica plays an important role in disinfection, while AgNP-mediated bactericidal action dominates at low dosages of chitosan. To further decrease the manufacturing cost, partially oxidized "black rice husk ash" containing substantial residual carbon was applied as AgNP support and found to lead to a greater degree of silver impregnation and to exhibit a longer disinfection lifetime than that of lower carbon content silica supports. On the basis of these findings, it is clear that considerable scope exists for careful optimization in the design and production of AgNP-based bactericidal materials for water treatment purposes.