Level, distribution and sources of Np, Pu and Am isotopes in Peter the Great Bay of Japan sea

Transuranium elements such as Np, Pu and Am, are considered to be the most important radioactive elements in view of their biological toxicity and environmental impact. Concentrations of 237Np, Pu isotopes and 241Am in two sediment cores collected from Peter the Great Bay of Japan Sea were determined using radiochemical separation combined with inductively coupled plasma mass spectrometry (ICP-MS) measurement. The 239,240Pu and 241Am concentrations in all sediment samples range from 0.01 Bq/kg to 2.02 Bq/kg and from 0.01 Bq/kg to 1.11 Bq/kg, respectively, which are comparable to reported values in the investigated area. The average atomic ratios of 240Pu/239Pu (0.20 ± 0.02 and 0.21 ± 0.01) and 241Am/239+240Pu activity ratios (3.32 ± 2.76 and 0.45 ± 0.17) in the two sediment cores indicated that the sources of Pu and Am in this area are global fallout and the Pacific Proving Grounds through the movement of prevailing ocean currents, and no measurable release of Np, Pu and Am from the local K-431 nuclear submarine incident was observed. The extremely low 237Np/239Pu atomic ratios ((2.0-2.5) × 10-4) in this area are mainly attributed to the discrepancy of their different chemical behaviors in the ocean due to the relatively higher solubility of 237Np compared to particle active plutonium isotopes. It was estimated using two end members model that 23% ± 6% of transuranium radionuclides originated from the Pacific Proving Grounds tests, and the rest (ca. 77%) from global fallout.

Pyridine Diphosphonate Ligand for Stabilization of Tetravalent Uranium and Neptunium in Aqueous Medium under Aerobic Conditions

Though uranium is usually present in its +6 oxidation state (as uranyl ion) in aqueous solutions, its conversion to oxidation states such as +4 or +5 is a challenging task. Electrochemical reduction and axial oxo activation are the preferred methods to get stable unusual oxidation states of uranium in an aqueous medium. In previous studies, dicarboxylic acid has been used to stabilize UO2+ in aqueous alkaline solutions. In the present work, a diphosphonate ligand was chosen due to its higher complexing ability compared to that of the carboxylate ligands. Neptunium complexation studies with 2,6-pyridinediphosphonic acid (PyPOH) indicated the formation of different species at different pH values and the complexation facilitates disproportionation of NpO2+ to Np4+ and NpO22+ at pH 2. Hexavalent actinides form insoluble complexes in aqueous media at pH = 2, as confirmed by UO22+ complexation studies. The in situ complexation-driven precipitation resulted in conversion to pure Np4+ in aqueous media as the Np4+-PyPOH complex. A strong complexing ability of the PyPOH ligand toward the Np4+ ion is also seen for the stabilization of the electrochemically generated U4+ in aqueous medium under aerobic conditions. The U4+-PyPOH complex was found to be stable for 3 months. Raman, UV-vis, fluorescence, and cyclic voltametric studies along with density functional theory (DFT) calculations were done to get structural insights into the PyPOH complexes of actinides in different oxidation states.

Sorption behaviour of neptunium in marine and fresh water bottom sediments in Far East area of Russia (Lake Khanka and Amur Bay)

The concentration and sorption behavior of 237Np on the bottom sediments of water bodies in the Far East region of Russia (Lake Khanka and Peter the Great Bay) were studied for the first time. The 237Np concentrations vary from 1.06 × 10-6 to 4.43 × 10-5 mBq g-1 in the bottom sediments of Lake Khanka and from 1.05 × 10-4 to 2.52 × 10-3 mBq g-1 for Amur Bay. The experiment on the adsorption of Np on marine and lake sediment showed that it is sorbed through complexation with silicates (albite, leucite). The Np sorption isotherm on marine sediments is described by the Langmuir equation; the distribution coefficients (Kd) of Np vary from 57 to 588 mL g-1. For lake sediments, the isotherm is described by the Henry equation; the Kd value reaches 935 mL g-1.

Kinetic features of solvent extraction by N,O-donor ligands of f-elements: a comparative study of diamides based on 1,10-phenanthroline and 2,2'-bipyridine

A variant of microfluidic setup design for the study of extraction kinetics has been proposed. Mass transfer constants for Am(III) and Eu(III) and observed rate constants were obtained for N-,O-donor ligands featuring phenanthroline and bipyridyl cores. The possibility of determining rate constants for cations independently of each other makes it possible to observe the kinetic effect of separation. The extraction rate was found to be lower for the bipyridyl ligand, compared to phenanthroline. The values of the rotation barriers for the ligands were calculated using the DFT method. The values correlate with the obtained low extraction rate for the bipyridyl ligand. Also, crystallographic data showing anti-conformation for the bipyridyl ligand align with the kinetic data. Surface tension was also determined for the systems with the studied ligands. It is shown that at equal ligand concentrations, the value of surface tension agrees with the extraction rate. Furthermore, it is shown that for the bipyridyl ligand, prior contact of the organic phase with nitric acid significantly affects the surface tension.

Formation of Neptunium(V) Carbonates: Examining the Forceful Influence of Alkali and Alkaline Earth Cations

Herein, neptunium(V) carbonates containing sodium or potassium cations were synthesized via chemical precipitation. Various techniques such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, thermogravimetry combined with differential scanning calorimetry, X-ray diffraction, and X-ray absorption spectroscopy were used to analyze the microstructures and elemental compositions of these samples. The crystal structures of hydrated NaNpO2CO3·3H2O (P1, a = 4.3420(2) Å, b = 4.8962(2) Å, c = 10.0933(11) Å, α = 91.014(7)°, β = 77.834(11)°, and γ = 90.004(10)°) and KNpO2CO3 (P63/mmc, a = b = 5.0994(2) Å, c = 10.2210(15) Å) were determined for the first time using the Rietveld method. The synthesized carbonates exhibited distinct structural features and decomposition behaviors, as demonstrated through thermogravimetry analysis, which revealed the presence of crystalline hydrate water in sodium neptunium(V) carbonate. Furthermore, calcium-containing neptunium(V) carbonates were synthesized and characterized. Samples with the general composition Ca0.5NpO2CO3 were obtained using the ion exchange method and chemical precipitation from solutions containing competing cations (Ca2+, Na+, K+, and Mg2+). The synthesis conditions notably affected the diffraction patterns of the obtained calcium neptunium(V) carbonates. This investigation enhances our understanding of the structural properties and thermodynamic stability of neptunium(V) carbonates in the presence of diverse cations commonly found under radioactive waste disposal conditions.

Sensing and extraction of hazardous metals by di-phosphonates of heterocycles: a combined experimental and theoretical study

In this study, pyridine and phenanthroline diphosphonate ligands were investigated for the first time from the context of solvent extraction and potentiometric sensing of Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) cations. The extraction efficiency under the same conditions for phenanthroline-diphosphonates is considerably higher than that for pyridine ligands. At the same time, the pyridine-diphosphonates show pronounced selectivity towards lead in this metal series. The extraction systems with phenanthroline diphosphonates provided the most efficient extraction of Cd(II) and Pb(II) cations (D > 90). The newly developed pyridine and phenanthroline diphosphonate ligands have proven to be highly effective components in plasticized polymeric membranes. These ligands can be utilized to construct potentiometric ion sensors that exhibit a notable response specifically towards Pb(II) cations. Among the previously reported tetradentate ligands, the phenanthroline diphosphonate ligand, when incorporated into plasticized polymeric membranes, demonstrated the highest sensitivity towards d-metals and Pb(II). The structure of the single crystal complex of Pb(II) and Cd(II) with pyridine-diphosphonates was studied by X-ray diffraction analysis (XRD). The geometry of Cu(II), Zn(II), Cd(II) and Pb(II) complexes and the energy effect of the complex formation, including pseudo-oligomerization reactions, were determined by DFT calculations. The high sensing and extraction efficiency of diphosphonates with respect to Pb(II) is consistent with the minimum values of complex formation energies. The variation in sensory and extraction properties observed among the studied diphosphonate ligands is influenced by the ability to form polynuclear complexes with Pb(II) cations, whereas such properties are absent in the case of Cd(II) cations.

Insights into Actinium Complexes with Tetraacetates─AcBATA versus AcDOTA: Thermodynamic, Structural, and Labeling Properties

In the current research, we conducted a comparative study of the Ac³⁺ complex with H₄DOTA and H₄BATA. The stability constants of the [AcBATA]^- and [AcDOTA]^- complexes were studied directly by extraction methods. We discovered that the thermodynamic properties of the [AcBATA]^- complex are superior to those of [AcDOTA]^-. Moreover, the fast kinetics of H₄BATA complexation with Ac³⁺ during the radiolabeling experiment was observed already at room temperature. Ac³⁺ was placed inside the macrocyclic cavity of the [AcBATA]^- complex, preventing the release of the cation. According to DFT studies, two possible conformations were found, where two pendant arms coordinate with the metal cation on one side of the azacrown cavity and two on the other side, or three pendant arms are located on one side and one on the other. Finally, high inertness in vitro and in vivo of [AcBATA]^- was discovered, making the H₄BATA ligand highly preferable for application as a component of actinium-based radiopharmaceuticals.

Super-oxidized "activated graphene" as 3D analogue of defect graphene oxide: Oxidation degree vs U(VI) sorption

Porous carbons are not favorable for sorption of heavy metals and radionuclides due to absence of suitable binding sites. In this study we explored the limits for surface oxidation of "activated graphene" (AG), porous carbon material with the specific surface area of ∼2700 m²/g produced by activation of reduced graphene oxide (GO). Set of "Super-Oxidized Activated Graphene" (SOAG) materials with high abundance of carboxylic groups on the surface were produced using "soft" oxidation. High degree of oxidation comparable to standard GO (C/O=2.3) was achieved while keeping 3D porous structure with specific surface area of ∼700-800 m²/. The decrease in surface area is related to the oxidation-driven collapse of mesopores while micropores showed higher stability. The increase in the oxidation degree of SOAG is found to result in progressively higher sorption of U(VI), mostly related to the increase in abundance of carboxylic groups. The SOAG demonstrated extraordinarily high sorption of U(VI) with the maximal capacity up to 5400 μmol/g, that is 8.4 - fold increase compared to non-oxidized precursor AG, ∼50 -fold increase compared to standard graphene oxide and twice higher than extremely defect-rich graphene oxide. The trends revealed here show a way to further increase sorption if similar oxidation degree is achieved with smaller sacrifice of surface area.

Effect of the type of N-substituent in the benzo-18-azacrown-6 compound on copper(II) chelation: complexation, radiolabeling, stability in vitro, and biodistribution in vivo

In this work, we synthesized two new benzo-18-azacrown-6 ethers bearing picolinate and pyridine pendant arms and studied the copper complexes of these ligands, as well as those of an acetate analog. All considered ligands were capable of forming mono- and dinuclear complexes due to their large size and large number of donor sites. Among all forms of complexes, the coordination of cations inside the macrocycle has only been shown for the mononuclear form of the acetate complex, while out-cage coordination has been observed for other forms. Electrochemical studies have shown the instability of the mononuclear form of the complex with the pyridine ligand to the reduction in the range of redox potentials of bioreductants. The stabilities of labeled acetate complexes with "in-cage" coordination of the cation and picolinate with "out-cage" coordination were compared in an excess of serum and superoxide dismutase; while the former turned out to be unstable to transchelation, the latter was stable throughout the experiment. Additional studies in biologically relevant media were performed for the picolinate complex and demonstrated its stability in vitro. The biodistribution of this complex in mice after 6 hours post-injection demonstrates a slow excretion from the body; however, the accumulation is noticeably lower than that of free copper cations.

Photonuclear production of medical radioisotopes 161Tb and 155Tb

The production possibility of ¹⁶¹Tb and ¹⁵⁵Tb by irradiating of natural dysprosium with gamma rays obtained by decelerating an electron beam with an energy of 55 MeV has been demonstrated experimentally. The yield of ¹⁶¹Tb was 14.4 × 10³ Bq × μA^-1 × h^-1 × cm² × g_Dy2O3^-1. Simultaneously, upon irradiation, ¹⁵⁵Dy is formed with the yield of 25 × 10³ Bq × μA^-1 × h^-1 × cm² × g_Dy2O3^-1, which leads to the formation of 1.6 × 10³ Bq × μA^-1 × h^-1 × cm² × g_Dy2O3^-1 of ¹⁵⁵Tb. It has been shown that the isolation of terbium radioisotopes from tens of mg of dysprosium target can be achieved by extraction chromatography, and final separation yield was 39%. The impurity of ¹⁶⁰Tb is 7.3% of the ¹⁶¹Tb activity at EOB.

Oxidation and Nanoparticle Formation during Ce(III) Sorption onto Minerals

The sorption of Ce(III) on three abundant environmental minerals (goethite, anatase, and birnessite) was investigated. Batch sorption experiments using a radioactive ¹³⁹Ce tracer were performed to investigate the key features of the sorption process. Differences in sorption kinetics and changes in oxidation states were found in the case of the sorption of Ce(III) on birnessite compared to that on other minerals. Speciation of cerium onto all of the studied minerals was investigated using spectral and microscopic methods: high-resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), and X-ray absorption spectroscopy (XAS) in conjunction with theoretical calculations. It was found that during the sorption process onto birnessite, Ce(III) was oxidized to Ce(IV), while the Ce(III) on goethite and anatase surfaces remained unchanged. Oxidation of Ce(III) by sorption on birnessite was also accompanied by the formation of CeO₂ nanoparticles on the mineral surface, which depended on the initial cerium concentration and pH value.

Solvation-Anionic Exchange Mechanism of Solvent Extraction: Enhanced U(VI) Uptake by Tetradentate Phenanthroline Ligands

Phenanthroline diamides (L) demonstrated a unique ability to extract uranium from nitric acid solutions into a polar organic solvent forming complexes of 1:2 stoichiometry as tight ion pairs {[UO₂LNO₃]⁺[UO₂(NO₃)₃]^-} by a novel extraction mechanism, which is a combination of two already well-known mechanisms: solvation and ion-pair anion exchange. A UV-vis study was used to confirm the formation of such complexes directly in the organic phase. Moreover, chemical synthesis and single crystal growth were performed to confirm unambiguously the structure of the complexes in the solid state.

Pyridine-di-phosphonates as chelators for trivalent f-elements: kinetics, thermodynamic and interfacial study of Am(III)/Eu(III) solvent extraction

The fractionation of high-level radioactive waste from nuclear power plants simplifies the handling of its components, and facilitates the reduction of radiotoxic effects on the environment. The search and study of new ligands for solvent extraction, as one of the methods in fractionation, remains a complex and important research task. In this work, four pyridine diphosphonate ligands were synthesized. These ligands are part of the class of the N,O-donor extractants, which are selective towards Am(III). The separation factor SF(Am/Eu) for the best extractant reached values up to 10. The influence of the substituents on the efficiency of extraction and complexation of trivalent f-elements, the kinetics of extraction, and the behavior of the ligand at the interface were described. The effect of nitric acid concentration on the extraction was shown. The stoichiometry of the complexes was determined by slope analysis in solvent extraction experiment and verified by spectrophotometric titration in acetonitrile. Liquid tension experiments with a pendant drop method revealed the interfacial properties of the ligands in "F-3 solvent/H₂O" and "F-3 solvent/HNO₃" systems. The relationship between the surface activity and the ligand structure was shown. Studies of the extraction kinetics were performed in a modified Lewis cell. The effect of the ligand structure on the extraction rate was shown. The DFT calculation with the B3LYP density functional was used to explain the extraction properties of the ligands, including selectivity. The calculation of the pre-organization energy of the ligands explained the kinetics and extraction patterns for the studied series.

Novel Hybrid Benzoazacrown Ligand as a Chelator for Copper and Lead Cations: What Difference Does Pyridine Make

A synthetic procedure for the synthesis of azacrown ethers with a combination of pendant arms has been developed and the synthesized ligand, characterized by various techniques, was studied. The prepared benzoazacrown ether with hybrid pendant arms and its complexes with copper and lead cations were studied in terms of biomedical applications. Similarly to a fully acetate analog, the new one binds both cations with close stability constants, despite the decrease in both constants. The calculated geometry of the complexes correlate with the data from X-ray absorption and NMR spectroscopy. Coordination of both cations differs due to the difference between the ionic radii. However, these chelation modes provide effective shielding of cations in both cases, that was shown by the stability of their complexes in the biologically relevant media towards transchelation and transmetallation.

To form or not to form: PuO2 nanoparticles at acidic pH

The aim of this study is to synthesize PuO2 nanoparticles (NPs) at low pH values and characterize the materials using laboratory and synchrotron-based methods. Properties of the PuO2 NPs formed under acidic conditions (pH 1-4) are explored here at the atomic scale. High-resolution transmission electron microscopy (HRTEM) is applied to characterize the crystallinity, morphology and size of the particles. It is found that 2 nm crystalline NPs are formed with a PuO2 crystal structure. High energy resolution fluorescence detected (HERFD) X-ray absorption spectroscopy at the Pu M4 edge has been used to identify the Pu oxidation states and recorded data are analysed using the theory based on the Anderson impurity model (AIM). The experimental data obtained on NPs show that the Pu(iv) oxidation state dominates in all NPs formed at pH 1-4. However, the suspension at pH 1 demonstrates the presence of Pu(iii) and Pu(vi) in addition to the Pu(iv), which is associated with redox dissolution of PuO2 NPs under acidic conditions. We discuss in detail the mechanism that affects the PuO2 NPs synthesis under acidic conditions and compare it with one in neutral and alkaline conditions. Hence, the results shown here, together with the first Pu M4 HERFD data on PuF3 and PuF4 compounds, are significant for the colloid facilitated transport governing the migration of plutonium in a subsurface environment.

Structural Insight into Complexation Ability and Coordination of Uranyl Nitrate by 1,10-Phenanthroline-2,9-diamides

Reprocessing of spent nuclear fuel (SNF) is an important task in a frame of ecology and rational use of natural resources. Uranium, as the main component of SNF (>95%), can be recovered for further use as fresh nuclear fuel. To minimize an amount of solid radioactive waste generated during SNF reprocessing, new extractants are under investigation. Diamides of 1,10-phenanthroline-2,9-dicarboxylic acid are perspective tetradentate N-donor ligands that form strong complexes with f-elements, which are soluble in polar organic solvents. As an example of three ligands of this class, we conducted a comparative study and showed how the substituent in the amide functional group affects the extraction ability toward uranyl nitrate from nitric acid media. We have performed a careful study (NMR, FT-IR, XRD, RMC-EXAFS) of the structures of synthesized complexes of new ligands with uranyl nitrate and used quantum mechanical calculations to explain the discovered regularities through.

Way to Enforce Selectivity via Steric Hindrance: Improvement of Am(III)/Eu(III) Solvent Extraction by Loaded Diphosphonic Acid Esters

Hybrid donor extractants are a promising class of compounds for the separation of trivalent actinides and lanthanides. Here, we investigated a series of sterically loaded diphosphonate ligands based on bipyridine (BiPy-PO-iPr and BiPy-PO-cHex) and phenanthroline (Phen-PO-iPr and Phen-PO-cHex). We studied their complex formation with nitrates of trivalent f-elements in solvent extraction systems (Am and Eu) and homogeneous acetonitrile solutions (Nd, Eu, and Lu). Phenanthroline extractants demonstrated the highest efficiency and selectivity [SF(Am/Eu) up to 14] toward Am(III) extraction from nitric acid solutions among all of the studied diphosphonates of N-heterocycles. The binding constants established by UV-vis titration also indicated stronger binding of sterically impaired diphosphonates compared to the primary substituted diphosphonates. NMR titration and slope analysis during solvent extraction showed the formation of 2:1 complexes at high concentrations (>10^-3 mol/L) for phenanthroline-based ligands. According to UV-vis titrations at low concentrations (10^-5-10^-6 mol/L), the phenanthroline-based ligands formed 1:1 complexes. Bipyridine-based ligands formed 1:1 complexes regardless of the ligand concentration. Luminescence titrations revealed that the quantum yields of the complexes with Eu(III) were 81 ± 8% (BiPy-PO-iPr) and 93 ± 9% (Phen-PO-iPr). Single crystals of the structures [Lu(μ²,κ⁴-(iPrO)₂P(O)Phen(O)₂(OiPr))(NO₃)₂]₂ and Eu(Phen-PO-iPr)(NO₃)₃ were obtained by chemical synthesis with the Phen-PO-iPr ligand. X-ray diffraction studies revealed a closer contact of the f-element with the aromatic N atoms in the case of sterically loaded P═O ligands compared with sterically deficient ligands. Density functional theory calculations allowed us to rationalize the observed selectivity trends in terms of the bond length, Mayer bond order, and preorganization energy.

Labeling and receptor affinity of an ultra-short somatostatin analogue Thz-Phe-D-Trp-Lys-Thr-DOTA

Somatostatin analogues play an important role in the therapy of neuroendocrine tumors by binding to somatostatin receptors on the surface of cancer cells. In this work, we analyze the receptor-binding affinity and in vitro stability of a novel ultra-short somatostatin analogue Thz-Phe-D-Trp-Lys-Thr-DOTA (DOTA-P4). This conjugate is successfully radiolabeled with ⁴⁴ Sc, ⁹⁰ Y, ¹⁵² Eu, and ²⁰⁷ Bi, characterized and validated by thin layer and high-performance liquid chromatography. The optimum conditions for M-DOTA-P4 labeling are found. In vitro stability studies are performed in saline, in the presence of serum proteins, and with biologically relevant metal cations. All complexes demonstrate no cation release in vitro within 4-24 h. The conformations of DOTA-conjugates are studied by circular dichroism spectroscopy. The circular dichroism spectra of DOTA-P4 conjugates show a negative peak at 225 nm, which may correspond to the required β-sheet conformation. The binding to somatostatin receptors of types 2 and 5 is performed with the IMR-32 cells at 4°C, with non-specific binding representing 26% of the total binding. A two-line approximation of the Scatchard plot results in the apparent dissociation constants of 0.10 and 2.25 nM. It is shown that the chelator position with respect to the amino acid sequence significantly affects the labeling conditions with cations of different ionic radii. For the first time, the binding of a linear type ultra-short peptide conjugate with DOTA to somatostatin receptors is demonstrated. The obtained results are promising for experiments with DOTA-P4 in vivo in mice with inoculated tumors.

Artificial radionuclides association with bottom sediment components from Mayak Production Association industrial reservoirs

About ten years have passed since the last published report in Russian on the speciation and distribution features of radionuclides in the bottom sediment of Production Association (PA) "Mayak" (further mentioned as Mayak) artificial reservoirs. Herein, the desorption parameters of ¹³⁷Cs, ⁹⁰Sr, ²⁴¹Am, and ^238,239+240Pu and their association with bottom sediment components were investigated in two Mayak reservoirs (R-17 (decommissioned) and R-4 (still in use) with big differences in size, activity and water regime). It was established that ¹³⁷Cs and ⁹⁰Sr desorption from the R-17 bottom sediment reach constant values after 24 h, and the desorption degree is not dependant on pH but on ionic strength. Sequential extraction indicated that the main accumulation mechanism of ¹³⁷Cs is incorporation into the clay minerals. The maximum plutonium content was detected in the residual fraction of the R-17 bottom sediment, which could be associated with the effects of precipitation aging. In R-4, plutonium is equally distributed between residual and bound to organic matter fractions. The ²⁴¹Am is associated with carbonates in the R-17 bottom sediment and with organic matter in the R-4 bottom sediment and to lesser extent with iron-manganese oxides. The radionuclides are becoming less environmentally available with time since deposition.

Deep Learning Insights into Lanthanides Complexation Chemistry

Modern structure-property models are widely used in chemistry; however, in many cases, they are still a kind of a "black box" where there is no clear path from molecule structure to target property. Here we present an example of deep learning usage not only to build a model but also to determine key structural fragments of ligands influencing metal complexation. We have a series of chemically similar lanthanide ions, and we have collected data on complexes' stability, built models, predicting stability constants and decoded the models to obtain key fragments responsible for complexation efficiency. The results are in good correlation with the experimental ones, as well as modern theories of complexation. It was shown that the main influence on the constants had a mutual location of the binding centers.

Partitioning of uranium in contaminated bottom sediments: The meaning of fractionation

Sequential extraction tests were used to study partitioning of U in the bottom sediments of two reservoirs that have been used for the temporary storage of nuclear waste at the "Mining and Chemical Combine" (Zheleznogorsk, Krasnoyarsk region, Russia). Various sequential extraction protocols were applied to the bottom sediment samples and the results compared with those obtained for laboratory-prepared simulated samples with different speciation and partitioning, e.g., U(VI) sorbed onto various inorganic minerals and organic matter, as well as uranium oxides. The distributions of uranium in fractions extracted from simulated and actual contaminated samples were compared to shed light on the speciation of U in the bottom sediments. X-ray absorption spectroscopy, X-ray diffraction, and scanning electron microscopy were also used to analyze the partitioning of U in contaminated sediments. We also compared the results obtained using the spectroscopic and microscopic techniques, as well as sequential extraction.

Effect of solution acidity on the crystallization of polychromates in uranyl-bearing systems: synthesis and crystal structures of Rb2[(UO2)(Cr2O7)(NO3)2] and two new polymorphs of Rb2Cr3O10

Three new rubidium polychromates, Rb2[(UO2)(Cr2O7)(NO3)2] (1), γ-Rb2Cr3O10 (2) and δ-Rb2Cr3O10 (3) were prepared by combination of hydrothermal treatment at 220 °C and evaporation of aqueous solutions under ambient conditions. Compound 1 is monoclinic, P 2 1 / c $P{2}_{1}/c$ , a = 13.6542(19), b = 19.698(3), c = 11.6984(17) Å, β = 114.326(2)°, V = 2867.0(7) Å3, R 1 = 0.040; 2 is hexagonal, P 6 3 / m $P{6}_{3}/m$ , a = 11.991(2), c = 12.828(3) Å, γ = 120°, V = 1597.3(5) Å3, R 1 = 0.031; 3 is monoclinic, P 2 1 / n $P{2}_{1}/n$ , a = 7.446(3), b = 18.194(6), c = 7.848(3) Å, β = 99.953(9)°, V = 1047.3(7) Å3, R 1 = 0.037. In the crystal structure of 1, UO8 bipyramids and NO3 groups share edges to form [(UO2)(NO3)2] species which share common corners with dichromate Cr2O7 groups producing novel type of uranyl dichromate chains [(UO2)(Cr2O7)(NO3)2]2−. In the structures of new Rb2Cr3O10 polymorphs, CrO4 tetrahedra share vertices to form Cr3O10 2− species. The trichromate groups are aligned along the 63 screw axis forming channels running in the ab plane in the structure of 2. The Rb cations reside between the channels and in their centers completing the structure. The trichromate anions are linked by the Rb+ cations into a 3D framework in the structure of 3. Effect of solution acidity on the crystallization of polychromates in uranyl-bearing systems is discussed.

The Application of HEXS and HERFD XANES for Accurate Structural Characterisation of Actinide Nanomaterials: The Case of ThO2

The structural characterisation of actinide nanoparticles (NPs) is of primary importance and hard to achieve, especially for non-homogeneous samples with NPs less than 3 nm. By combining high-energy X-ray scattering (HEXS) and high-energy-resolution fluorescence-detected X-ray absorption near-edge structure (HERFD XANES) analysis, we have characterised for the first time both the short- and medium-range order of ThO2 NPs obtained by chemical precipitation. By using this methodology, a novel insight into the structures of NPs at different stages of their formation has been achieved. The pair distribution function revealed a high concentration of ThO2 small units similar to thorium hexamer clusters mixed with 1 nm ThO2 NPs in the initial steps of formation. Drying the precipitates at around 150 °C promoted the recrystallisation of the smallest units into more thermodynamically stable ThO2 NPs. HERFD XANES analysis at the thorium M4 edge, a direct probe for f states, showed variations that we have correlated with the breakdown of the local symmetry around the thorium atoms, which most likely concerns surface atoms. Together, HEXS and HERFD XANES are a powerful methodology for investigating actinide NPs and their formation mechanism.

Insight into the structure–property relationship of UO2 nanoparticles

We show that the structural and electronic properties of UO₂ NPs (2–3 nm) are similar to those of bulk UO₂ under inert conditions, with U(iv) as the dominating oxidation state, though NPs oxidize with time and under the X-ray beam.

The plutonium isotopes and strontium-90 determination in hot particles by characteristic X-rays

This paper reports the developed non-destructive methods for the plutonium isotopes and strontium-90 content determination in hot particles and other samples. The proposed methods are based on the measurement of the characteristic X-rays accompanying the decay of these radionuclides. For hot particles of NPP accident origin, the proposed method's error limits are 10-15% for hot particles (samples) with activity above 100 Bq and 15-20% for hot particles (samples) with activity less than 100 Bq. For explosive particles, the determination accuracy is 10-15% for activity more than 5 Bq and 20-30% for 0.1-5 Bq activity. The accuracy of the proposed method for determining ⁹⁰Sr in samples with its specific content of more than 10⁴ Bq/sample is 5%, with ~10² Bq/sample its content is 15-20%. The cost of one sample measurement and the processing time of these methods are significantly reduced compared to traditional studies. The proposed methods are reasonably simple measurement methods and can be carried out even in the field condition. They open up new possibilities for the quick search and study of hot particles and environmental samples.

The Application of HEXS and HERFD XANES for Accurate Structural Characterisation of Actinide Nanomaterials: The Case of ThO2

Invited for the cover of this issue is Lucia Amidani and co-workers from the The European Synchrotron, Helmholtz Zentrum Dresden-Rossendorf, Lomonosov Moscow State University, Kurchatov Institute, and the Université Grenoble Alpes. The image depicts the atomic structure of the sample being viewed through "atomic googles", which represent the X-ray techniques used in this work. Read the full text of the article at 10.1002/chem.202003360.

Enhanced Sorption of Radionuclides by Defect-Rich Graphene Oxide

Extremely defect graphene oxide (dGO) is proposed as an advanced sorbent for treatment of radioactive waste and contaminated natural waters. dGO prepared using a modified Hummers oxidation procedure, starting from reduced graphene oxide (rGO) as a precursor, shows significantly higher sorption of U(VI), Am(III), and Eu(III) than standard graphene oxides (GOs). Earlier studies revealed the mechanism of radionuclide sorption related to defects in GO sheets. Therefore, explosive thermal exfoliation of graphite oxide was used to prepare rGO with a large number of defects and holes. Defects and holes are additionally introduced by Hummers oxidation of rGO, thus providing an extremely defect-rich material. Analysis of characterization by XPS, TGA, and FTIR shows that dGO oxygen functionalization is predominantly related to defects, such as flake edges and edge atoms of holes, whereas standard GO exhibits oxygen functional groups mostly on the planar surface. The high abundance of defects in dGO results in a 15-fold increase in sorption capacity of U(VI) compared to that in standard Hummers GO. The improved sorption capacity of dGO is related to abundant carboxylic group attached hole edge atoms of GO flakes as revealed by synchrotron-based extended X-ray absorption fine structure (EXAFS) and high-energy resolution fluorescence detected X-ray absorption near edge structure (HERFD-XANES) spectroscopy.

The missing pieces of the PuO2 nanoparticle puzzle

The nanoscience field often produces results more mystifying than any other discipline. It has been argued that changes in the plutonium dioxide (PuO₂) particle size from bulk to nano can have a drastic effect on PuO₂ properties. Here we report a full characterization of PuO₂ nanoparticles (NPs) at the atomic level and probe their local and electronic structures by a variety of methods available at the synchrotron, including extended X-ray absorption fine structure (EXAFS) at the Pu L₃ edge, X-ray absorption near edge structure (XANES) in high energy resolution fluorescence detection (HERFD) mode at the Pu L₃ and M₄ edges, high energy X-ray scattering (HEXS) and X-ray diffraction (XRD). The particles were synthesized from precursors with different oxidation states of plutonium (III, IV, and V) under various environmentally and waste storage relevant conditions (pH 8 and pH > 10). Our experimental results analyzed with state-of-the-art theoretical approaches demonstrate that well dispersed, crystalline NPs with a size of ∼2.5 nm in diameter are always formed in spite of diverse chemical conditions. Identical crystal structures and the presence of only the Pu(iv) oxidation state in all NPs, reported here for the first time, indicate that the structure of PuO₂ NPs is very similar to that of the bulk PuO₂. All methods give complementary information and show that investigated fundamental properties of PuO₂ NPs, rather than being exotic, are very similar to those of the bulk PuO₂.

Speciation of Uranium and Plutonium From Nuclear Legacy Sites to the Environment: A Mini Review

The row of 15 chemical elements from Ac to Lr with atomic numbers from 89 to 103 are known as the actinides, which are all radioactive. Among them, uranium and plutonium are the most important as they are used in the nuclear fuel cycle and nuclear weapon production. Since the beginning of national nuclear programs and nuclear tests, many radioactively contaminated nuclear legacy sites, have been formed. This mini review covers the latest experimental, modeling, and case studies of plutonium and uranium migration in the environment, including the speciation of these elements and the chemical reactions that control their migration pathways.

Volume oxidation of uranium mononitride and uranium monocarbide in the dry NOX-gaseous atmosphere

Gaseous volume oxidation (voloxidation) of uranium mononitride (UN) and uranium monocarbide (UC) was investigated in the “NOx-air” atmosphere in the temperature range 298–673 K. It was shown that UN can be converted into uranium water-soluble compounds using an alternative oxidation atmosphere based on NOX-gases. UO3 and uranyl nitrates are the main products of the reaction. Maximum degree of the UN conversion to water-soluble compounds equal to 80 % was observed at the temperature 565 K. Products of the UC conversion are uranium oxides and oxihydroxides. The observed degree of the UC conversion into water-soluble compounds was less then 20 %.

Zinc and copper complexes with azacrown ethers and their comparative stability in vitro and in vivo

Copper-based radiopharmaceuticals are of high interest these days owing to the decay properties of copper radioisotopes. In contrast, labeled zinc compounds have been less studied for applications in nuclear medicine. In this study, the stability of labeled zinc and copper complexes with two azacrown ether ligands was investigated and compared. Then, the in vitro and in vivo stability of the studied zinc complexes was demonstrated, with the complexes showing promise for biomedical applications. In contrast, analogous copper complexes quickly dissociated in the presence of serum proteins. Furthermore, a simple method for the production of radiochemically pure 65Zn was proposed, and the opportunity for its use as a surrogate radionuclide for research into potential zinc-containing radiopharmaceuticals was demonstrated.

The impact of alicyclic substituents on the extraction ability of new family of 1,10-phenanthroline-2,9-diamides

Some unexpected “structure–extraction properties” patterns were found for new family of 1,10-phenanthroline-2,9-diamide derived ligands.

A multi-technique study of altered granitic rock from the Krunkelbach Valley uranium deposit, Southern Germany

Herein, a multi-technique study was performed to reveal the elemental speciation and microphase composition in altered granitic rock collected from the Krunkelbach Valley uranium (U) deposit area near an abandoned U mine, Black Forest, Southern Germany. The former Krunkelbach U mine with 1–2 km surrounding area represents a unique natural analogue site with the rich accumulation of secondary U minerals suitable for radionuclide migration studies from a spent nuclear fuel (SNF) repository. Based on a micro-technique analysis using several synchrotron-based techniques such as X-ray fluorescence analysis, X-ray absorption spectroscopy, powder X-ray diffraction and laboratory-based scanning electron microscopy and Raman spectroscopy, the complex mineral assemblage was identified. While on the surface of granite, heavily altered metazeunerite–metatorbernite (Cu(UO₂)₂(AsO₄)_2−x(PO₄)_x·8H₂O) microcrystals were found together with diluted coatings similar to cuprosklodowskite (Cu(UO₂)₂(SiO₃OH)₂·6H₂O), in the cavities of the rock predominantly well-preserved microcrystals close to metatorbernite (Cu(UO₂)₂(PO₄)₂·8H₂O) were identified. The Cu(UO₂)₂(AsO₄)_2−x(PO₄)_x·8H₂O species exhibit uneven morphology and varies in its elemental composition, depending on the microcrystal part ranging from well-preserved to heavily altered on a scale of ∼200 μm. The microcrystal phase alteration could be presumably attributed to the microcrystal morphology, variations in chemical composition, and geochemical conditions at the site. The occurrence of uranyl-arsenate-phosphate and uranyl-silicate mineralisation on the surface of the same rock indicates the signatures of different geochemical conditions that took place after the oxidative weathering of the primary U- and arsenic (As)-bearing ores. The relevance of uranyl minerals to SNF storage and the potential role of uranyl-arsenate mineral species in the mobilization of U and As into the environment is discussed.

A multi-technique elemental and microphase analysis of altered granitic rock from the Krunkelbach Valley uranium deposit, Black Forest, Southern Germany.

A Novel Metastable Pentavalent Plutonium Solid Phase on the Pathway from Aqueous Plutonium(VI) to PuO2 Nanoparticles

Here we provide evidence that the formation of PuO₂ nanoparticles from oxidized Pu^VI under alkaline conditions proceeds through the formation of an intermediate Pu^V solid phase, similar to NH₄PuO₂CO₃, which is stable over a period of several months. For the first time, state‐of‐the‐art experiments at Pu M₄ and at L₃ absorption edges combined with theoretical calculations unambiguously allow to determine the oxidation state and the local structure of this intermediate phase.

Towards the surface hydroxyl species in CeO2 nanoparticles

Understanding the complex chemistry of functional nanomaterials is of fundamental importance. Controlled synthesis and characterization at the atomic level is essential to gain deeper insight into the unique chemical reactivity exhibited by many nanomaterials. Cerium oxide nanoparticles have many industrial and commercial applications, resulting from very strong catalytic, pro- and anti-oxidant activity. However, the identity of the active species and the chemical mechanisms imparted by nanoceria remain elusive, impeding the further development of new applications. Here, we explore the behavior of cerium oxide nanoparticles of different sizes at different temperatures and trace the electronic structure changes by state-of-the-art soft and hard X-ray experiments combined with computational methods. We confirm the absence of the Ce(iii) oxidation state at the surface of CeO2 nanoparticles, even for particles as small as 2 nm. Synchrotron X-ray absorption experiments at Ce L3 and M5 edges, combined with X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and small angle X-ray scattering (SAXS) and theoretical calculations demonstrate that in addition to the nanoceria charge stability, the formation of hydroxyl groups at the surface profoundly affects the chemical performance of these nanomaterials.

Benzoazacrown compound: a highly effective chelator for therapeutic bismuth radioisotopes

A new benzoazacrown ligand H4BATA was synthesized and its complexation ability towards bismuth cations was evaluated. Binding of cation occurs at room temperature in a few minutes and formed complex exhibits the same level of inertness as highly stable complex with the well-known H4DOTA in biologically relevant and challenging media under in vivo conditions.