Particle characterization in commercial buildings: A cross-sectional study in 40 offices in Singapore

There is a knowledge gap in understanding how existing office buildings are protecting occupants from exposure to particles from both indoor and outdoor sources. We report a cross-sectional study involving weekly measurements of size-resolved indoor and outdoor particle concentrations in forty commercial building offices in Singapore. The outdoor and indoor particles size distributions were single mode with daytime peak number concentrations at 36.5 nm and 48.7 nm. Outdoor concentrations were significantly greater than indoors for all particle diameters. Indoor particle concentrations were generally low due to: 1) relatively high indoor particle removal (IPR) rates; 2) low indoor source strengths; and 3) low indoor particle of outdoor proportion (IPOP). We found that the ventilation system type had a substantial effect on indoor particle levels, IPR and IPOP. Through linear mixed model analyses, we identified dependencies of IPR rates with the use of MERV13 filters in supply air and filter maintenance frequency, IPOP with the use of MERV13 filters in the fresh air and supply air ducts and low particle source strength with regular daily cleaning presumably due to dust reservoir removal. Lastly, the contribution of outdoor sources was mainly seen for ultrafine and fine particles but less pronounced for coarse particles. This study provided detailed understanding of particle exposure in building offices and their influencing factors, facilitating future research on health impact of particle exposures.

The chemical composition and sources of road dust, and of tire and road wear particles-A review

To gain better understanding of how the transition to electric vehicles affects road dust (RD) composition, and potential health and environmental risks, it is crucial to analyze the chemical composition of RD and identify its sources. Sources of RD include wear of tire tread (TT), brake wear (BW) and road wear (RW). A relevant component of RD are tire and road wear particles (TRWPs). This literature review compiles data on the chemical bulk composition of RD sources, RD in Asia, Europe and North America and TRWP as a RD component. The focus is on elements such as Cd, Co, Cr, Cu, Ni, Pb, V, and Zn. Although the comparability of global RD data is limited due to differences in sampling and analytical methods, no significant differences in the composition from Asia, Europe, and North America were found for most of the investigated elements studied, except for Cd, Co, and V. Sources of RD were analyzed using elemental markers. On average TT, BW, and RW contributed 3 %, 1 %, and 96 %, respectively. The highest concentrations of TT (9 %) and BW (2 %) were observed in the particle size fraction of RD ≤ 10 μm. It is recommended that these results be verified using additional marker compounds. The chemical composition of TRWPs from different sources revealed that (i) TRWPs isolated from a tunnel dust sample are composed of 31 % TT, 6 % BW, and 62 % RW, and (ii) test material from tire test stands show a similar TT content but different chemical bulk composition likely because e.g., of missing BW. Therefore, TRWPs from test stands need to be chemically characterized prior to their use in hazard testing to validate their representativeness.

Characterization and childhood exposure assessment of toxic heavy metals in household dust under true living conditions from 10 China cities

Health hazards caused by metal exposure in household dust are concerning environmental health problems. Exposure to toxic metals in household dust imposes unclear but solid health risks, especially for children. In this multicenter cross-sectional study, a total of 250 household dust samples were collected from ten stratified cities in China (Panjin, Shijiazhuang, Qingdao, Lanzhou, Luoyang, Ningbo, Xi'an, Wuxi, Mianyang, Shenzhen) between April 2018 and March 2019. Questionnaire was conducted to gather information on individuals' living environment and health status in real-life situations. Multivariate logistic regression and principal component analysis were conducted to identify risk factors and determine the sources of metals in household dust. The median concentration of five metals in household dust from 10 cities ranged from 0.03 to 73.18 μg/g. Among the five heavy metals, only chromium in household dust of Mianyang was observed significantly both higher in the cold season and from the downwind households. Mercury, cadmium, and chromium were higher in the third-tier cities, with levels of 0.08, 0.30 and 97.28 μg/g, respectively. There were two sources with a contribution rate of 38.3 % and 25.8 %, respectively. Potential risk factors for increased metal concentration include long residence time, close to the motorway, decoration within five years, and purchase of new furniture within one year. Under both moderate and high exposure scenarios, chromium showed the highest level of exposure with 6.77 × 10-4 and 2.28 × 10-3 mg·kg-1·d-1, and arsenic imposed the highest lifetime carcinogenic risk at 1.67 × 10-4 and 3.17 × 10-4, respectively. The finding highlighted the priority to minimize childhood exposure of arsenic from household dust.

Nitrogen in landfills: Sources, environmental impacts and novel treatment approaches

Nitrogen (N) accumulation in landfills is a pressing environmental concern due to its diverse sources and significant environmental impacts. However, there is relatively limited attention and research focus on N in landfills as it is overshadowed by other more prominent pollutants. This study comprehensively examines the sources of N in landfills, including food waste contributing to 390 million tons of N annually, industrial discharges, and sewage treatment plant effluents. The environmental impacts of N in landfills are primarily manifested in N2O emissions and leachate with high N concentrations. To address these challenges, this study presents various mitigation and management strategies, including N2O reduction measures and novel NH4+ removal techniques, such as electrochemical technologies, membrane separation processes, algae-based process, and other advanced oxidation processes. However, a more in-depth understanding of the complexities of N cycling in landfills is required, due to the lack of long-term monitoring data and the presence of intricate interactions and feedback mechanisms. To ultimately achieve optimized N management and minimized adverse environmental impacts in landfill settings, future prospects should emphasize advancements in monitoring and modeling technologies, enhanced understanding of microbial ecology, implementation of circular economy principles, application of innovative treatment technologies, and comprehensive landfill design and planning.

Weak transport of atmospheric water-insoluble particulate carbon from South Asia to the inner Tibetan Plateau in the monsoon season

Carbonaceous particles play a crucial role in atmospheric radiative forcing. However, our understanding of the behavior and sources of carbonaceous particles in remote regions remains limited. The Tibetan Plateau (TP) is a typical remote region that receives long-range transport of carbonaceous particles from severely polluted areas such as South Asia. Based on carbon isotopic compositions (Δ14C/δ13C) of water-insoluble particulate carbon (IPC) in total suspended particle (TSP), PM2.5, and precipitation samples collected during 2020-22 at the Nam Co Station, a remote site in the inner TP, the following results were achieved: First, fossil fuel contributions (ffossil) to IPC in TSP samples (28.60 ± 9.52 %) were higher than that of precipitation samples (23.11 ± 8.60 %), and it is estimated that the scavenging ratio of IPC from non-fossil fuel sources was around 2 times that from fossil fuel combustion during the monsoon season. The ffossil of IPC in both TSP and PM2.5 samples peaked during the monsoon season. Because heavy precipitation during the monsoon season scavenges large amounts of long-range transported carbonaceous particles, the contribution of local emissions from the TP largely outweighs that from South Asia during this season. The results of the IPC source apportionment based on Δ14C and δ13C in PM2.5 samples showed that the highest contribution of liquid fossil fuel combustion also occurred in the monsoon season, reflecting increased human activities (e.g., tourism) on the TP during this period. The results of this study highlight the longer lifetime of fossil fuel-sourced IPC in the atmosphere than that of non-fossil fuel sources in the inner TP and the importance of local emissions from the TP during the monsoon season. The findings provide new knowledge for model improvement and mitigation of carbonaceous particles.

Seasonal characterization of chemical and optical properties of water-soluble organic aerosol in Beijing

Water-soluble organic aerosol (WSOA) plays a crucial role in altering radiative forcing and impacting human health. However, our understanding of the seasonal variations of WSOA in Chinese megacities after the three-year clean air action plan is limited. In this study, we analyzed PM2.5 filter samples collected over one year (2020-2021) in Beijing to characterize the seasonal changes in the chemical and optical properties of WSOA using an offline aerosol mass spectrometer along with spectroscopy techniques. The mean mass concentration of WSOA during the observation period was 8.84 ± 7.12 μg m-3, constituting approximately 64-67 % of OA. Our results indicate the contribution of secondary OA (SOA) increased by 13-28 % due to a substantial reduction in primary emissions after the clean air action plan. The composition of WSOA exhibited pronounced seasonal variations, with a predominant contribution from less oxidized SOA in summer (61 %) and primary OA originating from coal combustion and biomass burning during the heating season (34 %). The mass absorption efficiency of WSOA at 365 nm in winter was nearly twice that in summer, suggesting that WSOA from primary emissions possesses a stronger light-absorbing capability than SOA. On average, water-soluble brown carbon accounted for 33-48 % of total brown carbon absorption. Fluorescence analysis revealed humic-like substances as the most significant fluorescence component of WSOA, constituting 82 %. Furthermore, both absorption and fluorescence chromophores were associated with nitrogen-containing compounds, highlighting the role of nitrogen-containing species in influencing the optical properties of WSOA. The results are important for chemical transport models to accurately simulate the WSOA and its climate effects.

Spatio-seasonal patterns and sources of major ions in the Longjiang River catchment, Southern China

River water quality is closely related to the major ion sources and hydrological conditions. However, there is a limited cognition about the geochemical sources and the seasonal variations of major ions. Thus, in this study, a total of 90 water samples were collected from the Longjiang River and its three tributaries in the dry and wet seasons. The samples were analyzed, including major ion concentrations and physicochemical parameters. Statistical analysis, such as correlation analysis and principal component analysis (PCA), was employed to investigate the spatial and seasonal variations in major ion composition and their respective sources. Our study revealed that the predominant major ions in the studied samples are Ca2+, Mg2+, HCO - 3, and SO2 - 4. Most of ions exhibited notable spatial disparities attributable to variations in geological settings and human activities. Regions characterized by igneous rock outcrops tend to exhibit higher levels of K+ and Na+, while areas with higher population densities in the middle and downstream segments show elevated concentrations of Cl-, NO - 3, SO2 - 4, Na+, and K+. The observed peak SO2 - 4 levels may be attributed to active mining operations. Most parameters displayed higher values in flood season than those in dry season due to dilution effects. Stoichiometric analysis indicated that carbonate weathering inputs contribute to over 85% of the mean total cation concentrations in the water, followed by contributions from silicates, atmospheric deposition, and anthropogenic inputs. On the whole, although the water quality remains non-polluted and is suitable for drinking and irrigation purposes, the enrichment of SO2 - 4 and NO - 3 may contribute to water eutrophication. Caution is warranted during the dry season due to reduced water flow resulting from dam interceptions and limited dilution capacity, potentially leading to elevated pollutant concentrations. Taken together, our results provided a scientific basis for water quality managements of monsoon rivers.

Level, distribution and sources of Np, Pu and Am isotopes in Peter the Great Bay of Japan sea

Transuranium elements such as Np, Pu and Am, are considered to be the most important radioactive elements in view of their biological toxicity and environmental impact. Concentrations of 237Np, Pu isotopes and 241Am in two sediment cores collected from Peter the Great Bay of Japan Sea were determined using radiochemical separation combined with inductively coupled plasma mass spectrometry (ICP-MS) measurement. The 239,240Pu and 241Am concentrations in all sediment samples range from 0.01 Bq/kg to 2.02 Bq/kg and from 0.01 Bq/kg to 1.11 Bq/kg, respectively, which are comparable to reported values in the investigated area. The average atomic ratios of 240Pu/239Pu (0.20 ± 0.02 and 0.21 ± 0.01) and 241Am/239+240Pu activity ratios (3.32 ± 2.76 and 0.45 ± 0.17) in the two sediment cores indicated that the sources of Pu and Am in this area are global fallout and the Pacific Proving Grounds through the movement of prevailing ocean currents, and no measurable release of Np, Pu and Am from the local K-431 nuclear submarine incident was observed. The extremely low 237Np/239Pu atomic ratios ((2.0-2.5) × 10-4) in this area are mainly attributed to the discrepancy of their different chemical behaviors in the ocean due to the relatively higher solubility of 237Np compared to particle active plutonium isotopes. It was estimated using two end members model that 23% ± 6% of transuranium radionuclides originated from the Pacific Proving Grounds tests, and the rest (ca. 77%) from global fallout.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

Therapeutic proteins: developments, progress, challenges, and future perspectives

Proteins are considered magic molecules due to their enormous applications in the health sector. Over the past few decades, therapeutic proteins have emerged as a promising treatment option for various diseases, particularly cancer, cardiovascular disease, diabetes, and others. The formulation of protein-based therapies is a major area of research, however, a few factors still hinder the large-scale production of these therapeutic products, such as stability, heterogenicity, immunogenicity, high cost of production, etc. This review provides comprehensive information on various sources and production of therapeutic proteins. The review also summarizes the challenges currently faced by scientists while developing protein-based therapeutics, along with possible solutions. It can be concluded that these proteins can be used in combination with small molecular drugs to give synergistic benefits in the future.

Microplastics and nanoplastics: Source, behavior, remediation, and multi-level environmental impact

Plastics introduced into the natural environment persist, degrade, and fragment into smaller particles due to various environmental factors. Microplastics (MPs) (ranging from 1 μm to 5 mm) and nanoplastics (NPs) (less than 1 μm) have emerged as pollutants posing a significant threat to all life forms on Earth. Easily ingested by living organisms, they lead to ongoing bioaccumulation and biomagnification. This review summarizes existing studies on the sources of MPs and NPs in various environments, highlighting their widespread presence in air, water, and soil. It primarily focuses on the sources, fate, degradation, fragmentation, transport, and ecotoxicity of MPs and NPs. The aim is to elucidate their harmful effects on marine organisms, soil biota, plants, mammals, and humans, thereby enhancing the understanding of the complex impacts of plastic particles on the environment. Additionally, this review highlights remediation technologies and global legislative and institutional measures for managing waste associated with MPs and NPs. It also shows that effectively combating plastic pollution requires the synergization of diverse management, monitoring strategies, and regulatory measures into a comprehensive policy framework.

Controlling effects of terrestrial organic matter on metal contamination and toxicity risks in port sediments

The contents of metals, total carbon, total nitrogen (TN), total organic carbon (TOC), and stable isotope composition (δ13Corg and δ15N) of sediment organic matter (SOM) were investigated to explore the sources and spatial distribution of metals and SOM in the surface sediments (Kaohsiung Port, Taiwan). Results showed that TOC and metals in estuarine sediments are high, gradually decreasing toward the port entrances. The δ13Corg, δ15N, and TOC/TN ratios indicate that SOM comes mainly from terrestrial sources. This study proposes a befitting model between metal pollution and toxicity risk index and SOM sources in port sediments by combining stable isotope composition, correlation matrix, and multiple linear regression analysis. The model indicates that the degree of metal pollution and toxicity risk in sediments are mainly affected by TOCterr content and SOM source. The results help to understand the influence of organic matter sources in port sediments on metal concentration distribution.

Interannual evolution of the chemical composition, sources and processes of PM2.5 in Chengdu, China: Insights from observations in four winters

The air quality in China has improved significantly in the last decade and, correspondingly, the characteristics of PM2.5 have also changed. We studied the interannual variation of PM2.5 in Chengdu, one of the most heavily polluted megacities in southwest China, during the most polluted season (winter). Our results show that the mass concentrations of PM2.5 decreased significantly year-by-year, from 195.8 ± 91.0 µg/m3 in winter 2016 to 96.1 ± 39.3 µg/m3 in winter 2020. The mass concentrations of organic matter (OM), SO42-, NH4+ and NO3- decreased by 49.6%, 57.1%, 49.7% and 28.7%, respectively. The differential reduction in the concentrations of chemical components increased the contributions from secondary organic carbon and NO3- and there was a larger contribution from mobile sources. The contribution of OM and NO3- not only increased with increasing levels of pollution, but also increased year-by-year at the same level of pollution. Four sources of PM2.5 were identified: combustion sources, vehicular emissions, dust and secondary aerosols. Secondary aerosols made the highest contribution and increased year-by-year, from 40.6% in winter 2016 to 46.3% in winter 2020. By contrast, the contribution from combustion sources decreased from 14.4% to 8.7%. Our results show the effectiveness of earlier pollution reduction policies and emphasizes that priority should be given to key pollutants (e.g., OM and NO3-) and sources (secondary aerosols and vehicular emissions) in future policies for the reduction of pollution in Chengdu during the winter months.

Insights into PM2.5 pollution of four small and medium-sized cities in Chinese representative regions: Chemical compositions, sources and health risks

Fine particles (PM2.5) pollution is still a severe issue in some cities in China, where the chemical characteristics of PM2.5 remain unclear due to limited studies there. Herein, we focused on PM2.5 pollution in small and medium-sized cities in key urban agglomerations and conducted a comprehensive study on the PM2.5 chemical characteristics, sources, and health risks. In the autumn and winter of 2019-2020, PM2.5 samples were collected simultaneously in four small and medium-sized cities in four key regions: Dingzhou (Beijing-Tianjin-Hebei region), Weinan (Fenwei Plain region), Fukang (Northern Slope of the Tianshan Mountain region), and Bozhou (Yangtze River Delta region). The results showed that secondary inorganic ions (43.1 %-67.0 %) and organic matter (OM, 8.6 %-36.4 %) were the main components of PM2.5 in all the cities. Specifically, Fukang with the most severe PM2.5 pollution had the highest proportion of SO42- (31.2 %), while the dominant components in other cities were NO3- and OM. The Multilinear Engine 2 (ME2) analysis identified five sources of PM2.5 in these cities. Coal combustion contributed most to PM2.5 in Fukang, but secondary sources in other cities. Combined with chemical characteristics and ME2 analysis, it was preliminarily determined that the primary emission of coal combustion had an important contribution to high SO42- in Fukang. Potential source contribution function (PSCF) analysis results showed that regional transport played an important role in PM2.5 in Dingzhou, Weinan and Bozhou, while PM2.5 in Fukang was mainly affected by short-range transport from surrounding areas. Finally, the health risk assessment indicated Mn was the dominant contributor to the total non-carcinogenic risks and Cr had higher carcinogenic risks in all cities. The findings provide a scientific basis for formulating more effective abatement strategies for PM2.5 pollution.

Isotopic insights and integrated analysis for heavy metal levels, ecological risks, and source apportionment in river sediments of the Qinghai-Tibet Plateau

The research was carried out to examine the pollution characteristics, ecological risk, and origins of seven heavy metals (Hg, As, Pb, Cu, Cd, Zn, and Ni) in 51 sediment samples gathered from 8 rivers located on the Qinghai-Tibet Plateau (QTP) in China. The contents of Hg and Cd were 5.0 and 1.1 times higher than their background values, respectively. The mean levels of other measured heavy metals were below those found naturally in the local soil. The enrichment factor showed that the study area exhibited significantly enriched Hg with 70.6% sampling sites. The Cd contents at 19.6% of sampling sites were moderately enriched. The other sampling sites were at a less enriched level. The sediments of all the rivers had a medium level of potential ecological risk. Hg was the major ecological risk factor in all sampling sites, followed by Cd. The findings from the positive matrix factorization (PMF) analysis shown agricultural activities, industrial activities, traffic emissions, and parent material were the major sources. The upper, middle, and low reaches of the Quanji river had different Hg isotope compositions, while sediments near the middle reaches were similar to the δ202Hg of the industrial source. At the upstream sampling sites, the Hg isotope content was very close to the background level. The results of this research can establish a strong scientific sound to improve the safety of the natural circumstances of rivers on the QTP.

Observations of HONO and its precursors between urban and its surrounding agricultural fields: The vertical transports, sources and contribution to OH

The insufficient study on vertical observations of main atmospheric reactive nitrogen oxides (NO2 and HONO) posed a great challenge to evaluate their intertransport between urban and agricultural areas, and to further learn the atmospheric nitrogen chemistry and the atmospheric oxidation capacity at high altitudes. A stereoscopic measurement campaign (satellite remote sensing, hyperspectral unmanned aerial vehicle (UAV) remote sensing and MAX-DOAS observation) was performed in a typical inland city Hefei and its surrounding agricultural fields from June to October 2022. Average aerosol vertical profiles exhibited a Gaussian shape above 100 m with maximum values of 0.67 km-1 and 0.55 km-1 at 300-400 m layer at Anhui University (AHU) and Changfeng (CF), respectively. The distinct layered structure was mainly attributed to regional transport. Average H2O and NO2 vertical profiles all showed a Gaussian shape and an exponential shape at AHU and CF, respectively. Moreover, the diurnal evolution of H2O profiles performed one peak and bi-peak patterns at AHU and CF, respectively, whereas the diurnal evolution of NO2 at two stations all exhibited bi-peak patterns attributed to vehicle emissions. Average HONO vertical profiles showed an exponential shape and a Gaussian shape at AHU and CF, respectively. Higher HONO (> 0.05 ppb) above 1.0 km at 14:00-16:00 was observed at CF. The transport flux analysis showed that the northern transport flux always larger than southern transport flux for aerosol and H2O. The maximum northern transport fluxes appeared at 300 m and surface for aerosol and H2O, respectively. It indicated that surrounding agricultural fields was an important source of atmospheric H2O of city. The southern transport flux was larger than northern transport flux for NO2, with a maximum net transport flux of 9.20 ppb m s-1 at 100 m. It demonstrated that NO2 transported from urban areas was an important source of NO2 in agricultural fields. For HONO, the southern transport flux was larger than northern transport flux under 100 m, whereas it was opposite above 100 m. It indicated that the HONO distributed at high altitudes at agricultural fields had potential to enhance the atmospheric oxidation capacity of urban area. The net horizontal transport fluxes of HONO of our defined cropland were 5.25 μg m-2 s-1 and -3.65 μg m-2 s-1 during non-fertilization and fertilization periods, respectively. It indicated that the cropland could obviously export HONO to surrounding atmosphere during the fertilization period. Deducing the contribution of direct emission, heterogeneous process was a major source of HONO at urban and agricultural areas. The average surface conversion rate of NO2-to-HONO (CHONO) was 0.01467 h-1, and this value decreased with the increase of height at urban station. While average surface CHONO was 0.0322 h-1 at agricultural fields, which was ~1.2-2.8 times higher than that at urban area. The CHONO at agricultural fields significantly increased with the increase of height. The average CHONO at 1.0 km was ~2.0-3.6 times higher than that at surface. That suggested that the heterogeneous process was the main HONO source at high altitudes at CF, and this process obviously correlated with aerosol and H2O. The higher OH production from HONO (P(OH)HONO) occurred at 0-200 m and 100-400 m with averaged values of 0.31 ppb h-1 and 0.39 ppb h-1 at AHU and CF, respectively. The high P(OH)HONO above 1.0 km at CF from September to October was strongly correlated with high O3 (> 80 ppb). This study emphasized the importance of the stereoscopic of HONO on the analysis of its distribution, evolution, source and atmospheric oxidizing contribution.

Heavy metals pollution from smelting activities: A threat to soil and groundwater

Throughout the literature, the word "heavy metal" (HM) has been utilized to describe soil contamination; in this context, we characterize it as those elements with a density greater than 5 g per cubic centimeter. Contamination is one of the major global health concerns, especially in China. China's rapid urbanization over the past decades has caused widespread urban water, air, and soil degradation. This study provides a complete assessment of the soil contamination caused by heavy metals in China's mining and smelting regions. The study of heavy metals (HMs) includes an examination of their potential adverse impacts, their origins, and strategies for the remediation of soil contaminated by heavy metals. The presence of heavy metals in soil can be linked to both natural and anthropogenic processes. Studies have demonstrated that soils contaminated with heavy metals present potential health risks to individuals. Children are more vulnerable to the effects of heavy metal pollution than adults. The results highlight the significance of heavy metal pollution caused by mining and smelting operations in China. Soil contaminated with heavy metals poses significant health concerns, both carcinogenic and non-carcinogenic, particularly to children and individuals living in heavily polluted mining and smelting areas. Implementing physical, chemical, and biological remediation techniques is the most productive approach for addressing heavy metal-contaminated soil. Among these methods, phytoremediation has emerged as a particularly advantageous option due to its cost-effectiveness and environmentally favorable characteristics. Monitoring heavy metals in soils is of utmost importance to facilitate the implementation of improved management and remediation techniques for contaminated soils.

Are we underestimating stormwater? Stormwater as a significant source of microplastics in surface waters

Stormwater represent a critical pathway for transporting microplastics (MPs) to surface waters. Due to complex dynamics of MPs in stormwater, its dispersion, weathering, risk, and transport are poorly understood. This review bridges those gaps by summarizing the latest findings on sources, abundance, characteristics, and dynamics involved in stormwater MP pollution. Weathering starts before or after MPs enter stormwater and is more pronounced on land due to continuous heat and mechanical stress. Land use patterns, rainfall intensity, MPs size and density, and drainage characteristics influence the transport of MPs in stormwater. Tire and road wear particles (TRWPs), littering, and road dust are major sources of MPs in stormwater. The concentrations of MPs varies from 0.38-197,000 particles/L globally. Further MP concentrations showed regional variations, highlighting the importance of local monitoring efforts needed to understand local pollution sources. We observed unique signatures associated with the shape and color of MPs. Fibers and fragments were widely reported, with transparent and black being the predominant colors. We conclude that the contribution of stormwater to MP pollution in surface waters is significantly greater than wastewater treatment plant effluents and demands immediate attention. Field and lab scale studies are needed to understand its behavior in stormwater and the risk posed to the downstream water bodies.

A review of chloride ions removal from high chloride industrial wastewater: Sources, hazards, and mechanisms

To reduce metal pipe corrosion, improve product quality, and meet zero liquid discharge (ZLD) criteria, managing chloride ion concentrations in industrial wastewaters from metallurgical and chemical sectors has become increasingly important. This review provides detailed information on the sources, concentration levels, and deleterious effects of chloride ions in representative industrial wastewaters, and also summarizes and discusses various chloride ion removal techniques, including precipitation, ion exchange, physical separation, and advanced oxidation (AOPs). Among these, AOPs are particularly promising due to their ability to couple with other technologies and the diversity of their auxiliary technologies. The development of dechlorination electrode materials by electro-adsorption (CDI) can be inspired by the electrode materials used in chloride ion battery (CIB). This review also provides insights into exploring the effective combination of multiple chloride removal mechanisms, as well as the development of environmentally friendly composite materials. This review provides a theoretical basis and development direction for the effective treatment and secondary utilization of chlorine-containing industrial wastewater in the future.

A critical review on organophosphate esters in drinking water: Analysis, occurrence, sources, and human health risk assessment

Organophosphate esters (OPEs) are ubiquitous in the environment. Copious studies assessed OPEs in various environmental media. However, there is limited summative information about OPEs in drinking water. This review provides comprehensive data for the analytical methods, occurrence, sources, and risk assessment of OPEs in drinking water. In general, liquid-liquid extraction and solid-phase extraction are the most common methods in the extraction of OPEs from drinking water, while gas chromatography and liquid chromatography are the most commonly used instrumental methods for detecting OPEs in drinking water. On the basis of these techniques, a variety of methods on OPEs pretreatment and determination have been developed to know the pollution situation of OPEs. Studies on the occurrence of OPEs in drinking water show that the total concentrations of OPEs vary seasonally and regionally, with tris(1-chloro-2-isopropyl) phosphate and tris(2-chloroethyl) phosphate dominant among different kinds of drinking water. Source identification studies show that there are three main sources of OPEs in drinking water: 1) source water contamination; 2) residual in drinking water treatment process; 3) leakage from device or pipeline. Besides, risk assessments indicate that individual and total OPEs pose no or negligible health risk to human, but this result may be significantly underestimated. Finally, the current knowledge gaps on the research of OPEs in drinking water are discussed and some suggestions are provided for future environmental research.

Insight into microplastics in the aquatic ecosystem: Properties, sources, threats and mitigation strategies

Globally recognized as emergent contaminants, microplastics (MPs) are prevalent in aquaculture habitats and subject to intense management. Aquaculture systems are at risk of microplastic contamination due to various channels, which worsens the worldwide microplastic pollution problem. Organic contaminants in the environment can be absorbed by and interact with microplastic, increasing their toxicity and making treatment more challenging. There are two primary sources of microplastics: (1) the direct release of primary microplastics and (2) the fragmentation of plastic materials resulting in secondary microplastics. Freshwater, atmospheric and marine environments are also responsible for the successful migration of microplastics. Until now, microplastic pollution and its effects on aquaculture habitats remain insufficient. This article aims to provide a comprehensive review of the impact of microplastics on aquatic ecosystems. It highlights the sources and distribution of microplastics, their physical and chemical properties, and the potential ecological consequences they pose to marine and freshwater environments. The paper also examines the current scientific knowledge on the mechanisms by which microplastics affect aquatic organisms and ecosystems. By synthesizing existing research, this review underscores the urgent need for effective mitigation strategies and further investigation to safeguard the health and sustainability of aquatic ecosystems.

Occurrence, influencing factors and sources of atmospheric microplastics in peri-urban farmland ecosystems of Beijing, China

Atmosphere is an important component of the microplastics (MPs) cycle. However, studies on atmospheric MPs in peri-urban farmland ecosystems are limited. Herein, the occurrence, influencing factors and geographic sources of atmospheric MPs in peri-urban farmland ecosystems have been analyzed. The average deposition flux of atmospheric MPs was found to be 167.09 ± 92.03 item·m-2·d-1. Around 68 % MPs had particle size <1000 μm, while the main colors of MPs were black (40.71 %) and blue (20.64 %). Approximately 91 % MPs were fibers, while polyethylene terephthalate (49 %) and rayon (36.93 %) were observed as the major microplastic types. The main factors influencing the atmospheric deposition of MPs were gross domestic product (GDP), population density, air pressure, and wind direction. Deposition fluxes exhibited positive correlations with GDP, population density and air pressure, and negative correlations with wind direction. Combined with the backward trajectory model, MPs were mainly found to be originated from the southeast in September and from the northwest in October-February. The study of atmospheric MPs in farmland ecosystems in peri-urban areas is important for the protection of ecological environment, prevention of human diseases and control of MPs pollution.

Bioaerosols in the atmosphere: A comprehensive review on detection methods, concentration and influencing factors

In the past few decades, especially since the outbreak of the coronavirus disease (COVID-19), the effects of atmospheric bioaerosols on human health, the environment, and climate have received great attention. To evaluate the impacts of bioaerosols quantitatively, it is crucial to determine the types of bioaerosols in the atmosphere and their spatial-temporal distribution. We provide a concise summary of the online and offline observation strategies employed by the global research community to sample and analyze atmospheric bioaerosols. In addition, the quantitative distribution of bioaerosols is described by considering the atmospheric bioaerosols concentrations at various time scales (daily and seasonal changes, for example), under various weather, and different underlying surfaces. Finally, a comprehensive summary of the reasons for the spatiotemporal distribution of bioaerosols is discussed, including differences in emission sources, the impact process of meteorological factors and environmental factors. This review of information on the latest research progress contributes to the emergence of further observation strategies that determine the quantitative dynamics of public health and ecological effects of bioaerosols.

Critical review on organophosphate esters in water environment: Occurrence, health hazards and removal technologies

Organophosphate esters (OPEs), which are phosphoric acid ester derivatives, are anthropogenic substances that are widely used in commerce. Nevertheless, there is growing public concern about these ubiquitous contaminants, which are frequently detected in contaminated water sources. OPEs are mostly emitted by industrial operations, and the primary routes of human exposure to OPEs include food intake and dermal absorption. Because of their negative effects on both human health and the environment, it is clear that innovative methods are needed to facilitate their eradication. In this study, we present a comprehensive overview of the existing characteristics and origins of OPEs, their possible impacts on human health, and the merits, drawbacks, and future possibilities of contemporary sophisticated remediation methods. Current advanced remediation approaches for OPEs include adsorption, degradation (advanced oxidation, advanced reduction, and redox technology), membrane filtration, and municipal wastewater treatment plants, degradation and adsorption are the most promising removal technologies. Meanwhile, we proposed potential areas for future research (appropriate management approaches, exploring the combination treatment process, economic factors, and potential for secondary pollution). Collectively, this work gives a comprehensive understanding of OPEs, providing useful insights for future research on OPEs pollution.

Distribution and sources of polycyclic aromatic hydrocarbons in surface sediments of the East China marginal seas: Significance of the terrestrial input and shelf mud deposition

To investigate the distribution, sources, influencing factors, and ecological risk of polycyclic aromatic hydrocarbons (PAHs) in East China Marginal Seas (ECMSs) sediments, we measured the concentrations of 16 PAHs in 104 surface sediment samples collected from the ECMSs in 2014 and 2016. Total PAH concentration (∑PAHs) ranged from 4.49 to 163.66 ng/g dry weight (dry w), with 65.98 ± 33.00 (mean ± SD) ng/g dry w. The highest PAH concentrations and total organic carbon were observed in areas with fine-grained sediments in the Bohai Sea (BS), Yellow Sea (YS), and coastal East China Sea (ECS), indicating the prominent influence of regional hydrodynamics and sediment properties. The dominant PAH congener in BS and YS was BbF, whereas coastal ECS was Phe. The heterogeneity of PAH sources implies that terrestrial PAH input and shelf mud deposition have crucial roles in the source-sink processes of PAHs in a strongly human-influenced marginal sea.

Interactions between MPs and PFASs in aquatic environments: A dual-character situation

Microplastics (MPs) and per- and polyfluoroalkyl substances (PFASs) have drawn great attention as emerging threats to aquatic ecosystems. Although the literature to study the MPs and PFASs alone has grown significantly, our knowledge of the overlap and interactions between the two contaminations is scarce due to the unawareness of it. Actually, numerous human activities can simultaneously release MPs and PFASs, and the co-sources of the two are common, meaning that they have a greater potential for interactions. The direct interaction lies in the PFASs adsorption by MPs in water with integrated mechanisms including electrostatic and hydrophobic interactions, plus many influence factors. In addition, the existence and transportation of MPs and PFASs in the aquatic environment have been identified. MPs and PFASs can be ingested by aquatic organisms and cause more serious combined toxicity than exposure alone. Finally, curbing strategies of MPs and PFASs are overviewed. Wastewater treatment plants (WWTPs) can be an effective place to remove MPs from wastewater, while they are also an important point source of MPs pollution in water bodies. Although adsorption has proven to be a successful curbing method for PFASs, more technological advancements are required for field application. It is expected that this review can help revealing the unheeded relationship and interaction between MPs and PFASs in aquatic environments, thus assisting the further investigations of both MPs and PFASs as a whole.

Comparison of nutrients status in Liaodong Bay and Northern Yellow Sea, China: Controlling factors and nutrient budgets

Under the dual stress of global warming and human interaction, Liaodong Bay (LDB) and northern Yellow Sea (NYS) are undergoing significant ecological changes. Little is known about the driving nutrients characteristics supporting fishery resource output in these areas. We carried out three field observations in 2019 to investigate nutrient status. Results showed that dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), and dissolved silica (DSi) concentrations changed seasonally, with lowest values in spring, and highest values in autumn. High DIN, DIP, and DSi concentrations were detected in LDB and NYS's estuary areas. The Yellow Sea Cold Water Mass plays a role in the distribution and seasonal variation of nutrients. Exchanges across the sediment-water interface, SFGD, atmospheric deposition, and the adjacent sea input dominated DIN dynamics of these areas. DIP primarily came from the adjacent sea input and DSi mainly originated from sediment release and the adjacent sea input. NYS seawater invasion accounted for 13.8% of DIN, 63.4% of DIP, and 35.1% of DSi in LDB. These results provide new insights to better facilitate the formulation of nitrogen and phosphorus reduction and control policies in these marginal seas.

Occurrence and characteristics of microplastics pollution in tropical agricultural soils in Klang Valley, Malaysia

Presently, microplastic pollution has emerged as a growing environmental risk around the world. Nevertheless, knowledge of the occurrence and characteristics of microplastics in tropical agricultural soil is limited. This study investigated the pollution of surface soil microplastics in two agricultural farms located at Klang Valley, Malaysia. An extraction method based on density separation by using saturated extraction solution (sodium sulfate, ρ = 2 g cm-3 and sucrose, ρ = 1.59 g cm-3 with a ratio 1:1, v/v) was carried out. The study revealed the mean particle size of soil microplastics with 3260.76 ± 880.38 μm in farm A and 2822.31 ± 408.48 μm in farm B. The dominant types of soil microplastics were fragments and films with major colors of white (59%) and transparent (28%) in farm A, while black (52%) and white (37.6%) in farm B. Representatives of soil microplastics detected polymers of polyvinyl chloride (PVC), high density polyethylene (HDPE), polycarbonate (PC), and polystyrene (PS). The sources of plastic products were black and white plastic pipes, black plastic films for vegetation, fertilizer bottles, plastic water containers and polystyrene storage boxes, and the breakdown processes, contributed to the microplastic pollution in these farms. The outcomes of this study will establish a better understanding of microplastic pollution in tropical agricultural soil in the Southeast Asian region. The findings would be beneficial as supportive reference for the endeavor to reduce microplastic pollution in agricultural soil.

The occurrence, sources, and health risks of substituted polycyclic aromatic hydrocarbons (SPAHs) cannot be ignored

Similar to parent polycyclic aromatic hydrocarbons (PPAHs), substituted PAHs (SPAHs) are prevalent in the environment and harmful to humans. However, they have not received much attention. This study investigated the occurrence, distribution, and sources of 10 PPAHs and 15 SPAHs in soil, water, and indoor and outdoor PM2.5 and dust in high-exposure areas (EAH) near industrial parks and low-exposure areas (EAL) far from industrial parks. PAH pollution in all media was more severe in the EAH than in the EAL. All SPAHs were detected in this study, with alkylated and oxygenated PAHs being predominant. Additionally, 3-OH-BaP and 1-OH-Pyr were detected in all dust samples in this study, and 6-N-Chr, a compound with carcinogenicity 10 times higher than that of BaP, was detected at high levels in all tap water samples. According to the indoor-outdoor ratio, PAHs in indoor PM2.5 in the EAH mainly originated from indoor pollution sources; however, those in the EAL were simultaneously affected by indoor-outdoor air exchange and indoor sources. Most target PAHs tended to deposit from air to dust, and this tendency was significantly negatively associated with the octanol-air partitioning coefficient of PAHs. SPAHs in the environment are primarily derived from the petroleum industry and the mixed combustion of gasoline, biomass, and coal. The toxicity equivalence factors of SPAHs were predicted using QSAR models to assess their lifetime carcinogenic risk (ILCR). The ILCRtotal from PAHs for adults in the EAH was >10-4. Though the levels of 6-N-Chr and 1-Me-Pyr in the environment were markedly lower than those of PPAHs, their ILCRs from PM2.5 inhalation and dermal contact with water exceeded 10-6. This study is significant for recognizing and controlling the health risks associated with SPAHs in humans.

An overview of current knowledge on organophosphate di-esters in environment: Analytical methods, sources, occurrence, and behavior

Organophosphate di-esters (di-OPEs) are highly related to tri-OPEs. The presence of di-OPEs in the environment has gained global concerns, as some di-OPEs are more toxic than their respective tri-OPE compounds. In this study, current knowledge on the analytical methods, sources, environmental occurrence, and behavior of di-OPEs were symmetrically reviewed by compiling data published till March 2023. The determination of di-OPEs in environmental samples was exclusively achieved with liquid chromatography mass spectrometry operated in negative mode. There are several sources of di-OPEs, including industrial production, biotic and abiotic degradation from tri-OPEs under environmental conditions. A total of 14 di-OPE compounds were determined in various environments, including dust, sediment, sludge, water, and atmosphere. The widespread occurrence of di-OPEs suggested that human and ecology are generally exposed to di-OPEs. Among all environmental matrixes, more data were recorded for dust, with the highest concentration of di-OPEs up to 32,300 ng g-1. Sorption behavior, phase distribution, gas-particle partitioning behavior was investigated for certain di-OPEs. Suggestions on future studies in the perspective of human exposure to and environmental behavior of di-OPEs were proposed.

Spatial distribution, source identification and flux estimation of polycyclic aromatic hydrocarbons and organochlorine pesticides in basins of the Eastern Indian Ocean

Although polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) have been recorded worldwide, information on their presence in the Eastern Indian Ocean (EIO), especially south of 10°S, remains limited. We investigated the distribution and depositional fluxes of PAHs and OCPs, and the major sources and ecological risks of PAHs in EIO surface sediments from the Central Indian Ocean (CIOB) and Wharton Basin (WB). The concentration of Σ18 PAHs and ∑10 OCPs had an average value (± SD) of 138.4 ± 52.34 and 0.8 ± 0.20 ng g-1, respectively. PAHs may mainly affected by traffic emission and biomass and wood combustion. Persistent organic pollutant accumulation rate (PAR) and depositional flux (DF) values showed that abundant PAHs might lost during top-down transport. The low trans- chordane (CHL)/cis-CHL ratio and PAR of OCPs may indicated few OCPs were inputted into the EIO recently. The results of binary isotope mixing modeling indicate the predominance of marine organic matter (MOM) in total organic carbon (TOC) of sediments. Fluoranthene (Flour) and pyrene (Py) might have potential biological effects in the EIO. The study provided background values for PAHs and OCPs in the Indian Ocean, and preliminarily revealed the fate of POPs in the open oceans.

A Nationwide Sample of Adolescents and Young Adults Share Where They Would Go Online for Abortion Information After Dobbs v. Jackson

PURPOSE

Given the changing landscape of abortion access, we sought to understand where adolescents and young adults retrieve information about abortion online.

METHODS

A nationwide sample (n = 638) of 14- to 24-year-olds responded to a qualitative text message survey in July 2022 regarding websites or social media they would use for abortion-related information. Open-ended responses were coded and analyzed for themes.

RESULTS

Forty-six percent of respondents (n = 234) named specific websites or accounts of known organizations or individuals; 14% named general clinical or governmental resources; and 13% named social media platforms. Eight percent expressed skeptical sentiments about online abortion information. 17% (n = 99) said they were not sure or did not have an opinion.

DISCUSSION

Many adolescents and young adults could name an online resource for abortion information, but some are not aware of specific resources, underscoring a need to elevate reputable sources and provide guidance on how and where to look for accurate online abortion-related information.

Temporal and spatial shifts in the chemical composition of urban coastal rainwaters of Kuwait: The role of air mass trajectory and meteorological variables

The rainwater chemistry encompasses the signatures of geogenic and anthropogenic processes along the regional air mass movement apart from the local sources. The predominance of dust events and anthropogenic emissions in arid regions facilitate new particle formation. Further, rain events of different seasons depict moisture sources from diverse regions reflecting variation in the regional geochemistry with respect to seasons. Hence, to characterize the geochemical composition of rainwater, the study has focused on an integrated approach by considering regional transport, meteorological components and possible local sources. A total of 74 rainwater samples were collected from 27 rain events in 2018, 2019, and 2022, representing urban coastal areas of Kuwait predominantly of Ca-SO4-HCO3 type. The average pH and electrical conductivity of the rainwater were 7.18 and 140 μS/cm, respectively. The sea salt fractions calculated relative to Kuwait seawater ranged from 25.6 to >100 %, with higher values attributed to anthropogenic sources. Sea salt fraction, ion ratios, principal component analysis and factor scores revealed the terrestrial and anthropogenic sources apart from marine contributions. In addition, new particle formation and aerosols contributed to the rainwater chemistry involving SOx, NOx, and photochemical reactions during higher relative humidity and lesser wind speed. The HYSPLIT reflected that the moisture sources were largely from western regions of the study area, and those of December and January events had long-distance travel across the Azores high originating from northeast America. The trajectories of the November events are observed to originate from the Caspian/Black Sea region in the northeastern part of Kuwait with a relatively shorter distance of travel. The rainfall samples had higher ionic concentrations, and saturated with aragonite and calcite minerals in a few locations specifically after the dust events, while the subsequent rain events were less polluted.

Omega-3 long-chain polyunsaturated fatty acids: Metabolism and health implications

Recently, omega-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFAs) have gained substantial interest due to their specific structure and biological functions. Humans cannot naturally produce these fatty acids (FAs), making it crucial to obtain them from our diet. This comprehensive review details n-3 LC-PUFAs and their role in promoting and maintaining optimal health. The article thoroughly analyses several sources of n-3 LC-PUFAs and their respective bioavailability, covering marine, microbial and plant-based sources. Furthermore, we provide an in-depth analysis of the biological impacts of n-3 LC-PUFAs on health conditions, with particular emphasis on cardiovascular disease (CVD), gastrointestinal (GI) cancer, diabetes, depression, arthritis, and cognition. In addition, we highlight the significance of fortification and supplementation of n-3 LC-PUFAs in both functional foods and dietary supplements. Additionally, we conducted a detailed analysis of the several kinds of n-3 LC-PUFAs supplements currently available in the market, including an assessment of their recommended intake, safety, and effectiveness. The dietary guidelines associated with n-3 LC-PUFAs are also highlighted, focusing on the significance of maintaining a well-balanced intake of n-3 PUFAs to enhance health benefits. Lastly, we highlight future directions for further research in this area and their potential implications for public health.

A review on sources of soil antimony pollution and recent progress on remediation of antimony polluted soils

Antimony (Sb) is a serious toxic and non-essential metalloid for animals, humans, and plants. The rapid increase in anthropogenic inputs from mining and industrial activities, vehicle emissions, and shoot activity increased the Sb concentration in the environment, which has become a serious concern across the globe. Hence, remediation of Sb-contaminated soils needs serious attention to provide safe and healthy foods to humans. Different techniques, including biochar (BC), compost, manures, plant additives, phyto-hormones, nano-particles (NPs), organic acids (OA), silicon (Si), microbial remediation techniques, and phytoremediation are being used globally to remediate the Sb polluted soils. In the present review, we described sources of soil Sb pollution, the environmental impact of antimony pollution, the multi-faceted nature of antimony pollution, recent progress in remediation techniques, and recommendations for the remediation of soil Sb-pollution. We also discussed the success stories and potential of different practices to remediate Sb-polluted soils. In particular, we discussed the various mechanisms, including bio-sorption, bio-accumulation, complexation, and electrostatic attraction, that can reduce the toxicity of Sb by converting Sb-V into Sb-III. Additionally, we also identified the research gaps that need to be filled in future studies. Therefore, the current review will help to develop appropriate and innovative strategies to limit Sb bioavailability and toxicity and sustainably manage Sb polluted soils hence reducing the toxic effects of Sb on the environment and human health.

Short-term photodegradation of autochthonous and allochthonous dissolved organic matter in Lake Taihu, China

Photochemistry is one of the key processes that shape the quality of dissolved organic matter (DOM) in aquatic systems, yet the photoreactivity of DOM from different sources remains largely unclear. In this study, DOM from 10 typical autochthonous and allochthonous sources in Lake Taihu basin were exposed to simulated sunlight, and quantitative and compositional changes of the DOM were explored by measuring its UV-Visable absorption and fluorescence spectroscopy. Photochemical release of nutrients was also explored during the incubations. Results showed that, although DOM from most sources experienced photobleaching effects with decreased absorption coefficients at 254 nm (a(254)) and fluorescence component intensities after light exposure, photochemical alterations of DOM linked to their original composition. Macrophyte-derived (Potamogeton malaianus) DOM, with the largest molecular size, showed increased a(254), humic- and protein-like fluorescence component (C1 and C2) abundances, and inorganic nutrient concentrations relative to dark controls, indicating photo-release of labile components. However, DOM with relatively higher aromaticity, e.g., from agricultural water and the lake, showed photobleaching effects and increased humification degree, probably due to the loss of aromatic components. Allochthonous anthropogenic DOM, e.g., from sewage, showed stronger photo-ammonification, likely relating to the fresh labile N-containing compositions. The form of inorganic nutrient releases during the DOM photolysis also varied with the original DOM sources. Macrophyte-derived DOM incubations showed larger photo-releases of NO3- and PO43-, while NO2- dominated inorganic nutrient releases during groundwater DOM light incubations. Thus, this study concludes that the photoreactivity of DOM closely relates to its original composition and sources.

Pollution characteristics, sources, and photochemical roles of ambient carbonyl compounds in summer of Beijing, China

Ambient carbonyls are important precursors of radicals and ground-level ozone (O3). In this study, sources, precursors, and impacts on radicals and O3 of carbonyls were investigated based on online observations of volatile organic compounds (VOCs) at an urban site in Beijing during June 2021. Carbonyls accounted for 36% and 42% of mixing ratios and OH reactivity for total measured VOCs, respectively. Formaldehyde was the most abundant carbonyl, with the mean level of 4.13 ± 2.28 ppb. Source apportionment results based on the multi linear regression (MLR) method suggested that secondary production contributed 41%, 25%, 36%, and 30% of formaldehyde, acetaldehyde, propanal, and acetone, respectively. Key precursors of carbonyls were then identified based on the calculation of their production rates. It was found that alkenes contributed 59%-80% of aldehydes production. Impacts of carbonyls on HOx radicals (OH and HO2) and O3 production were explored using a box model based on observations (OBM). Photolysis of HONO, formaldehyde, and O3 were the dominant primary sources of HOx radicals during daytime of O3 pollution days, with average relative contributions of 52%, 28%, and 19% to the total primary production rate of HOx, respectively. Aldehydes accounted for 32% (20% from formaldehyde) of average HOx removal rates. The relative incremental reactivity (RIR) values of NOx determined by the OBM were negative, suggesting that the O3-VOCs-NOx sensitivity was in the VOCs-limited regime. Using the observed concentrations of carbonyls as constraints of OBM, the absolute values of RIR for NOx tended to increase but those for anthropogenic VOCs tended to decrease. Formaldehyde showed the largest RIR value for anthropogenic VOCs during O3 pollution days. These findings indicated the important impacts of carbonyls on O3 production and O3-VOCs-NOx sensitivity.

Spatial distribution of antibiotics and antibiotic resistance genes in tidal flat reclamation areas in China

Tidal flat areas are important resources for land development and are becoming antibiotic resistance receivers that trigger major health concerns. The spatial distributions of forty-nine antibiotics, nine antibiotic resistance genes (ARGs), one mobile gene element (MGE) gene, and nine available metals in the soils and sediments along the coastlines of the Yellow Sea in China were quantified. Hierarchical linear model analysis was used to explore relationships between the antibiotics and ARGs across multiple effects resulting from human activities and environmental factors. Fish farm sediments and farmland soils showed high levels of quinolones (QNs) (maximum 637 ng·g-1), sulfonamides (SAs) (maximum 221 ng·g-1), and corresponding ARGs. Significant positive correlations (P from 5.47 × 10-14 to 0.0487) were observed between the antibiotics (QNs, SAs, and chlortetracycline) and their corresponding ARGs (qnrA, qnrD, aac(6')-Ib-cr, dfrA, sul2, and tetA), indicating the selective pressure from antibiotics in soils and sediments. Nine available metals had positive correlations with at least one ARG, indicating heavy metal pollution could enhance the ARGs. Sheep and poultry husbandry and marine aquaculture contribute the most to the antibiotic resistance in the coastlines. In conclusion, antibiotic pollutions have promoting effects at sub-inhibitory concentrations and more attention should be given to inhibit the enrichment of ARGs during tidal flat reclamation processes. The study also suggests the induction effects from metal pollutions, MGE spread, and the antibiotic pollutions from the usage in livestock and aquaculture.

The status of organochlorine pesticide contamination in Greek agricultural soils: the ghost of traditional agricultural history

Inadequate information regarding pesticide contamination in Greek agricultural soils is currently available, while national soil monitoring programs have not been initiated yet. The aim of the present study was to assess the levels, compositions, and distribution of thirty three organochlorine pesticides (OCPs) in Greek agricultural soils, due to the environmental threat posed by these compounds, even after decades from their abrogation from the market. Determination of the organochlorine pesticides was achieved using gas-chromatography-mass spectrometry, following a QuEChERS sample preparation method. A total of 60 soil samples, from two soil horizons (up to 60 cm), were obtained from agricultural lands in Greece throughout 2019-2020. The major findings presented DDTs, γ-HCH, alachlor, and 4,4- DCBP in the examined soil samples, with DDTs being the major compounds with their maximum cumulative concentration (ΣDDTs) reaching 1273.4 μg kg-1 d.w. Compositional profile and diagnostic ratios suggested that the occurrence of DDT residues was due to historical inputs. Most of the samples did not exceed the target values set by the Netherlands and Canadian guidelines for DDTs in soil; however, there was one exception in the case of Aegina Island. Finally, based on the environmental exposure assessment conducted, the vast majority of the analytes presented lower concentrations compared to the predicted environmental concentrations, with an exemption for DDE metabolite where the measured and predicted concentrations were almost equal.

Groundwater antibiotics contamination in an alluvial-pluvial fan, North China Plain: Occurrence, sources, and risk assessment

Antibiotics in groundwater have received widespread concern because high levels of them harm aquatic ecosystems and human health. This study aims to investigate the concentration, distribution, ecological and human health risks as well as potential sources of antibiotics in groundwater in the Hutuo River alluvial-pluvial fan, North China Plain. A total of 84 groundwater samples and nine surface water samples were collected, and 35 antibiotics were analyzed using ultra-performance liquid chromatography-tandem mass spectrometry. The results indicated that 12 antibiotics were detected in surface water with the total concentrations ranging from 5.33 ng/L to 64.73 ng/L. Macrolides were the primary category of antibiotics with a detection frequency of 77.8% (mean concentration: 9.14 ng/L). By contrast, in shallow granular aquifers (<150 m), 23 antibiotics were detected and the total concentrations of them ranged from below the method detection limit to 465.26 ng/L (detection frequency: 39.7%). Quinolones were the largest contributor of antibiotics with detection frequency and mean concentration of 32.1% and 12.66 ng/L, respectively. And ciprofloxacin and ofloxacin were the two preponderant individual antibiotics. The mean concentration of groundwater antibiotics in peri-urban areas was approximately 1.7-4.9 times that in other land use types. Livestock manure was the predominant source of antibiotics in groundwater. Erythromycin, sulfametoxydiazine, ofloxacin, and cinoxacin exhibited medium ecological risks to aquatic organisms. All antibiotics posed no risks to human health. The findings of this study provide valuable insights into the occurrence and management of antibiotic contamination in the groundwater in the Hutuo River alluvial-pluvial fan.

Inhalation bioaccessibility and risk assessment for PM-bound organic components: Co-effects of component physicochemical properties, PM properties, and sources

Inhalation bioaccessibility and deposition in respiratory tracts of organic components in atmospheric particulate matter (PM) are key factors for accurately estimating health risks and understanding human exposures. This study evaluated the in-vitro inhalation bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) and PAH derivatives, phthalic acid esters (PAEs), polychlorinated biphenyls (PCBs), and organophosphate flame retardants (OPFRs) in size-resolved PM from a Chinese megacity. The bioaccessibility ranged from 0.2% to 77.8% in the heating period (HP), and from 0.7% to 94.2% in the non-heating period (NHP). Result suggests that less hydrophobic organics might be more bioaccessible. Bioaccessibility of medium logKow organics in sizes > 0.65 µm was significantly inhibited by high carbon fractions, indicating the co-effects. Then, this is the first study to explore effects of sources on inhalation bioaccessibility of organics. Coal and biomass combustion in HP and traffic emission in NHP negatively correlated with bioaccessibility. Secondary particles also negatively correlated with bioaccessibility of medium logKow organics. Incremental lifetime cancer risk (ILCR) and non-cancer risk (HQ) for all measured components in PM10 were estimated after considering the bioaccessibility and deposition efficiencies and the HQ and ILCR were within the acceptable range. BaP and DEHP were strong contributors to HQ and ILCR, respectively.

Legacy per- and polyfluoroalkyl substances (PFASs) especially alternative PFASs in shellfish from Shandong Province, China: Distribution, sources, and health risk

We investigated the distribution of 8 per- and polyfluoroalkyl substances (PFASs) in 321 shellfish samples collected from four coastal cities along the Yellow Sea and Bohai Sea of Shandong Province, China. The concentrations of total PFASs (∑PFASs) were in the range of 0.061-178.259 ng/g wet weight (ww). Two legacy long-chain compounds were dominant. Three emerging compounds and two short-chain alternatives were also observed with higher concentration and detection frequency than in previous studies, whereas 4, 8-dioxa-3H-perfluorononanoate acid (ADONA) was not detected. There were differences in concentrations and composition profiles of PFASs among different species, as well as among different sampling cities. According to scores of principal component analysis, metal plating plants, textile treatments, and fluoropolymer products were considered as the main sources of PFAS contamination in shellfish. Furthermore, a potential health risk of perfluorooctanoic acid should be highly considered for local residents that frequently consume crabs and molluscs.

Source identification and health risk assessment of heavy metals with mineralogy: the case of soils from a Chinese industrial and mining city

Understanding the precise sources of heavy metals (HMs) in soil and the contribution of these sources to health risks has positive effects in terms of risk management. This study focused on the HMs in the soil of five land uses in an industrial and mining city. The sources of HMs in soils were identified, and the soil mineralogical characteristics and health risks of HMs were discussed. The results showed that the HMs (Cu, Zn, Ni, Cd, Pb) found in the soil of the five land uses were affected by human activities. For example, the Cu in grassland, gobi beach, woodland, green belt, and farmland is 22.3, 3.5, 22.5, 16.7, and 21.3 times higher than the soil background values in Gansu Province, respectively. The Positive Matrix Factorization model (PMF) results revealed that traffic emissions and industrial and agricultural activities were the primary sources of HMs in the soil, with industrial sources accounting for the largest share at 55.79%. Furthermore, various characteristics proved that the studied HMs were closely related to smelting products. Concentration-oriented health risk assessments showed that HMs in the different soil types held non-carcinogenic and carcinogenic risks for children and adults. Contamination source-oriented health risk assessments of children and adults found that industrial activities controlled non-carcinogenic and carcinogenic risks. This study highlighted the critical effects of smelting on urban soil and the contribution of pollution sources to health risks. Furthermore, this work is significant in respect of the risk control of HMs in urban soils.

Temporal trends, sources, and ecological risk of residual organochlorine pesticides (OCPs) in sediment core from the Dongping Lake, North China

A sedimentary record of the 19 organochlorine pesticides (OCPs) pollutants from Dongping Lake, north China, is presented in this study. According to the dating of core sediment and OCP content analysis in samples, from 1904 to 2016, the total concentration of OCPs varied from undetectable levels (n.d.) to 33.1 ng/g. The OCP concentration was first detected in the samples of 1938, and then gradually increased to a peak level in 2000 thereafter decreased until 2016. Among the detected OCPs, hexachlorocyclohexanes (HCHs) and dichlorodiphenyltrichloroethanes (DDTs) were the predominant and the most frequently detected contaminants in the core sediment, with concentrations ranging from n.d. to 16.9 ng/g and from n.d. to 8.8 ng/g, respectively. The distribution of OCPs in the sediments was affected by organic carbon concentration, showing a significant positive correlation (r = 0.93, p < 0.001), especially for HCHs (r = 0.98, p < 0.001). The source analysis showed that HCH contamination mainly derived from historical use of technical HCHs, while in recent years, it derived from lindane usage. DDT pollution was attributed to historical use of technical DDTs, as well as the microbial degradation of historic DDT residues. Finally, risk analysis was performed for OCPs in sediment cores based on sediment quality guidelines from the Canadian Council of Ministers of the Environment, showing that DDTs presented a high ecological toxicity risk during the period of 1959-2010.

Heavy metals and Pb isotopes in sediment cores from the Bering and Chukchi seas: Implications for environmental changes and human activities over the past century

The Bering Sea and the Chukchi Sea are important regions for marine ecosystems and climate change. However, the historical deposition and sources of metals in these regions are poorly understood. In this study, we utilized Pb isotopes and multi-element concentrations (Ni, Cu, Fe, Mn, Zn, Cd, Pb) coupled with Pb-210 dating to investigate the historical deposition and source identification of metals in sediment cores collected from the Bering Sea and the Chukchi Sea. Our findings reveal that the transport of organic matter was mainly transported by marine and terrestrial sources in the Bering and Chukchi Sea, respectively. Historical variations of metals were similar in both seas, showing an increasing trend of metals (excluding Mn) from the 1960s to the 1990s, followed by a gradual decrease after the 1990s, which can be attributed to the development of industrial and gasoline emission. The results of the geo-accumulation index indicated that sediment in both seas was relatively unpolluted with metals. Additionally, Pb isotopic ratios suggested that natural weathering was the primary source of Pb in the area, but the use and phase-out of gasoline were also well-reconstructed. This study provides valuable information for assessing environmental changes and human activities over the past century in the Arctic and subarctic Ocean.

Combining hydrochemistry and 13C analysis to reveal the sources and contributions of dissolved inorganic carbon in the groundwater of coal mining areas, in East China

East China is a highly aggregated coal-grain composite area where coal mining and agricultural production activities are both flourishing. At present, the geochemical characteristics of dissolved inorganic carbon (DIC) in groundwater in coal mining areas are still unclear. This study combined hydrochemical and carbon isotope methods to explore the sources and factors influencing DIC in the groundwater of different active areas in coal mining areas. Moreover, the 13C isotope method was used to calculate the contribution rates of various sources to DIC in groundwater. The results showed that the hydrochemical types of groundwater were HCO3-Ca·Na and HCO3-Na. The main water‒rock interactions were silicate and carbonate rock weathering. Agricultural areas were mainly affected by the participation of HNO3 produced by chemical fertilizer in the weathering of carbonate rocks. Soil CO2 and carbonate rock weathering were the major sources of DIC in the groundwater. Groundwater in residential areas was primarily affected by CO2 from the degradation of organic matter from anthropogenic inputs. Sulfate produced by gypsum dissolution, coal gangue accumulation leaching and mine drainage participated in carbonate weathering under acidic conditions, which was an important factor controlling the DIC and isotopic composition of groundwater in coal production areas. The contribution rates of groundwater carbonate weathering to groundwater DIC in agricultural areas and coal production areas ranged from 57.46 to 66.18% and from 54.29 to 62.16%, respectively. In residential areas, the contribution rates of soil CO2 to groundwater DIC ranged from 51.48 to 61.84%. The results will help clarify the sources and circulation of DIC in groundwater under the influence of anthropogenic activities and provide a theoretical reference for water resource management.

Stranded and floating marine debris detected along the coastline of Cabrera National Park (Balearic Islands)

Marine Protected Areas (MPAs) are managed to conserve ecosystems however increased reporting highlights the observations of marine debris within these areas. The coastline of Cabrera Natural Park (Cabrera MPA) was surveyed in February, March, May, and July of 2021 to evaluate the seasonal trend of marine debris between winter and summer months. A general value of 6.94 items/km, ranging from 4.38 ± 4.55 items/km in July to 12.57 ± 17.56 items/km in March, was detected with no statistical differences between areas or surveyed months. Abundance of stranded debris (77 %) was statistically higher than floating debris (23 %). Prevailed floating plastic pieces 2.5 >< 50 cm and stranded nets and pieces of nets >50 cm. Artificial polymer materials, non-sourced debris, and non-Single Use Plastics were the most common items identified. This study highlights the importance of applying mitigation measures to avoid the presence of marine debris in areas of ecological interest.

Higher ecological risks and lower bioremediation potentials identified for emerging OPEs than legacy PCBs in the Beibu Gulf, China

The production and use of organophosphate esters (OPEs) as substitutes for traditional halogenated flame retardants is increasing, resulting in greater global concern related to their ecological risks to marine environments. In this study, polychlorinated biphenyls (PCBs) and OPEs, representing traditional halogenated and emerging flame retardants, respectively, were studied in multiple environmental matrices in the Beibu Gulf, a typical semi-closed bay in the South China Sea. We investigated the differences in PCB and OPE distributions, sources, risks, and bioremediation potentials. Overall, the concentrations of emerging OPEs were much higher than those of PCBs in both seawater and sediment samples. Sediment samples from the inner bay and bay mouth areas (L sites) accumulated more PCBs, with penta- and hexa-CBs as major homologs. Chlorinated OPEs were prevalent in both seawater and sediment samples from the L sites, whereas tri-phenyl phosphate (TPHP) and tri-n-butyl phosphate (TNBP) were predominant at the outer bay (B sites) sediment samples. Source identification via principal component analysis, land use regression statistics, and δ13C analysis indicate that PCBs were mainly sourced from the atmospheric deposition of sugarcane and waste incineration, whereas sewage inputs, aquaculture, and shipping activity were identified as sources of OPE pollution in the Beibu Gulf. A half-year sediment anaerobic culturing experiment was performed for PCBs and OPEs, and the results only exhibited satisfactory dechlorination for PCBs. However, compared with the low ecological risks of PCBs to marine organisms, OPEs (particularly trichloroethyl phosphate (TCEP) and TPHP) exhibited low to medium threats to algae and crustaceans at most sites. Given their increasing usage, high ecological risks, and low bioremediation potential in enrichment cultures, pollution by emerging OPEs warrants close attention.

Long-term exposure to ambient fine particulate components and leukocyte epigenome-wide DNA Methylation in older men: the Normative Aging Study

BACKGROUND

Epigenome-wide association studies of ambient fine particulate matter (PM2.5) have been reported. However, few have examined PM2.5 components (PMCs) and sources or included repeated measures. The lack of high-resolution exposure measurements is the key limitation. We hypothesized that significant changes in DNA methylation might vary by PMCs and the sources.

METHODS

We predicted the annual average of 14 PMCs using novel high-resolution exposure models across the contiguous U.S., between 2000-2018. The resolution was 50 m × 50 m in the Greater Boston Area. We also identified PM2.5 sources using positive matrix factorization. We repeatedly collected blood samples and measured leukocyte DNAm with the Illumina HumanMethylation450K BeadChip in the Normative Aging Study. We then used median regression with subject-specific intercepts to estimate the associations between long-term (one-year) exposure to PMCs / PM2.5 sources and DNA methylation at individual cytosine-phosphate-guanine CpG sites. Significant probes were identified by the number of independent degrees of freedom approach, using the number of principal components explaining > 95% of the variation of the DNA methylation data. We also performed regional and pathway analyses to identify significant regions and pathways.

RESULTS

We included 669 men with 1,178 visits between 2000-2013. The subjects had a mean age of 75 years. The identified probes, regions, and pathways varied by PMCs and their sources. For example, iron was associated with 6 probes and 6 regions, whereas nitrate was associated with 15 probes and 3 regions. The identified pathways from biomass burning, coal burning, and heavy fuel oil combustion sources were associated with cancer, inflammation, and cardiovascular diseases, whereas there were no pathways associated with all traffic.

CONCLUSIONS

Our findings showed that the effects of PM2.5 on DNAm varied by its PMCs and sources.

Microplastics: a review of their impacts on different life forms and their removal methods

The pollution of microplastics (MPs) is a worldwide major concern, as they have become a major part of our food chain. MPs enter our ecosystem via different pathways, including anthropogenic activities and improper disposal of plastics. The aim of this article is to review the current scientific literature related to MPs and how they affect different life forms on earth. Briefly, MPs induced negative effects on humans are primarily linked with the oxidative stress and disruption in immunity. MPs not only affect the soil chemical and physical properties such as reduction in soil health and productivity but also impose harmful effects on soil microorganisms. Moreover, MP-induced plant growth reduction results from three complementary mechanisms: (i) reduction in root and shoot growth, (ii) reduction in photosynthesis accompanied by higher reactive oxygen species (ROS) production, and (iii) reduction in nutrient uptake via altered root growth. Given the negative effects of MPs on different life forms, it is important to remove or remediate them. We have discussed different MP removal methods including coagulation, membrane filtration technology, biochar, and biological degradation of MPs in soil and wastewater effluents. The use of ozone as ultrafiltration technique has also been shown as the most promising technique for MP removal. Finally, some future research recommendations are also put forward at the end to further enhance our understanding of the MPs induced negative effects on different life forms. The flowchart shows the interaction of MPs from water contaminated with MPs with different parts of the ecosystem and final interaction with human health.