Multifunctional 58S Bioactive Glass/Silver/Cerium Oxide-Based Biocomposites with Effective Antibacterial, Cytocompatibility, and Mechanical Properties

58S bioactive glass (BG) has effective biocompatibility and bioresorbable properties for bone tissue engineering; however, it has limitations regarding antibacterial, antioxidant, and mechanical properties. Therefore, we have developed BGAC biocomposites by reinforcing 58S BG with silver and ceria nanoparticles, which showed effective bactericidal properties by forming inhibited zones of 2.13 mm (against Escherichia coli) and 1.96 mm (against Staphylococcus aureus; evidenced by disc diffusion assay) and an increment in the antioxidant properties by 39.9%. Moreover, the elastic modulus, hardness, and fracture toughness were observed to be increased by ∼84.7% (∼51.9 GPa), ∼54.5% (∼3.4 GPa), and ∼160% (∼1.3 MPam1/2), whereas the specific wear rate was decreased by ∼55.2% (∼1.9 × 10-11 m3/Nm). X-ray diffraction, high-resolution transmission electron microscopy, and field emission scanning electron microscopy confirmed the fabrication of biocomposites and the uniform distribution of the nanomaterials in the BG matrix. The addition of silver nanoparticles in the 58S BG matrix (in BGA) increased mechanical properties by composite strengthening and bactericidal properties by damaging the cytoplasmic membrane of bacterial cells. The addition of nanoceria in 58S BG (BGC) increased the antioxidant properties by 44.5% (as evidenced by the 2,2-diphenyl-1-picrylhydrazyl assay). The resazurin reduction assay and MTT assay confirmed the effective cytocompatibility for BGAC biocomposites against mouse embryonic fibroblast cells (NIH3T3) and mouse bone marrow stromal cells. Overall, BGAC resulted in mechanical properties comparable to those of cancellous bone, and its effective antibacterial and cytocompatibility properties make it a good candidate for bone healing.

Enhancement Effect Induced by the Second Metal to Promote Ozone Catalytic Oxidation of VOCs

It is a promising research direction to develop catalysts with high stability and ozone utilization for low-temperature ozone catalytic oxidation of VOCs. While bimetallic catalysts exhibit excellent catalytic activity compared with conventional single noble metal catalysts, limited success has been achieved in the influence of the bimetallic effect on the stability and ozone utilization of metal catalysts. Herein, it is necessary to systematically study the enhancement effect in the ozone catalytic reaction induced by the second metal. With a simple continuous impregnation method, a platinum-cerium bimetallic catalyst is prepared. Also highlighted are studies from several aspects of the contribution of the second metal (Ce) to the stability and ozone utilization of the catalysts, including the "electronic effect" and "geometric effect". The synergistic removal rate of toluene and ozone is nearly 100% at 30 °C, and it still shows positive stability after high humidity and a long reaction time. More importantly, the instructive significance, which is the in-depth knowledge of enhanced catalytic mechanism of bimetallic catalysts resulting from a second metal, is provided by this work.

Green Synthesis of Ceria Nanoparticles from Cassava Tubers for Electrochemical Aptasensor Detection of SARS-CoV-2 on a Screen-Printed Carbon Electrode

Green synthesis approaches for making nanosized ceria using starch from cassava as template molecules to control the particle size are reported. The results of the green synthesis of ceria with an optimum calcination temperature of 800 °C shows a size distribution of each particle of less than 30 nm with an average size of 9.68 nm, while the ratio of Ce3+ to Ce4+ was 25.6%. The green-synthesized nanoceria are applied to increase the sensitivity and attach biomolecules to the electrode surface of the electrochemical aptasensor system for coronavirus disease (COVID-19). The response of the aptasensor to the receptor binding domain of the virus was determined with the potassium ferricyanide redox system. The screen-printed carbon electrode that has been modified with green-synthesized nanoceria shows 1.43 times higher conductivity than the bare electrode, while those modified with commercial ceria increase only 1.18 times. Using an optimized parameter for preparing the aptasensors, the detection and quantification limits were 1.94 and 5.87 ng·mL-1, and the accuracy and precision values were 98.5 and 89.1%. These results show that green-synthesized ceria could be a promising approach for fabricating an electrochemical aptasensor.

Doxorubicin loaded cerium substituted hydroxyapatite nanoparticles: A promising new therapeutic approach for bone regeneration, doxorubicin delivery, and cancer treatment

The current study used the precipitation method to prepare pure calcium hydroxyapatite (HA) and cerium-substituted hydroxyapatite (Ce-HA) nanoparticles, where cerium ions were exchanged into the HA structure at different concentrations ranging from 3 to 7 wt%. X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurements, and zeta potential were used to examine the structural characteristics of the nanoparticles. Additionally, the antibacterial and antifungal effects of the produced materials on Gram-positive, Gram-negative, and fungal bacterial species were studied. Nanoparticles with cerium doping showed effective antibacterial and antifungal properties. All samples were tested for bioactivity in simulated body fluid (SBF), and the formation of an apatite layer on their surfaces was highlighted using SEM in conjunction with energy-dispersive X-rays (EDX).Doxorubicin (DOX) release from Ce-HA nanoparticles and pure HA was tested in phosphate-buffered saline (PBS) for up to 28 days. Both nanoparticles were able to release the drug while still being semi-fully loaded. Similarly, the cytotoxic effect of all produced samples on the MG-63 cell line was evaluated, and all samples showed good cytocompatibility. The cytotoxic effect of doxorubicin-loaded nanoparticles showed promising anticancer activity against bone cancer cells, especially samples with high cerium content. The resulting nanoparticles show excellent promising ability for the delivery of doxorubicin to bone cancer with the capacity for bone regeneration.

Green synthesized Cu-doped CeO2nanoparticles for Congo red dye adsorption and antibacterial action

The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.

Development of a robust method for Cd(II) ions analysis using CeO2- and CeO2-Cu-BTC-based electrochemical sensors

Simple and sensitive electrochemical sensors were fabricated from cerium oxide (CeO2) and copper-benzene tricarboxylic acid-modified cerium oxide (CeO2-Cu-BTC) materials for differential pulse voltammetric analysis of toxic cadmium (Cd) ions in aqueous solutions. The materials were prepared by hydrothermal method and structurally characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction analysis (XRD). The CeO2-modified carbon paste electrode (CeCPE) and the CeO2-Cu-BTC-modified carbon paste electrode (CeBCPE) were electrochemically characterized by their cyclic voltammetry and electrochemical impedance study in standard K3[Fe(CN)6] single-electron redox process. Their electrochemical surface areas, electrode surface coverages, and charge transfer resistances were calculated to be 1.46 cm2, 2.338 × 10-5 mol∙cm-2, and 2790 Ω and 5.48 cm2, 2.476 × 10-5 mol∙cm-2, and 1254.65 Ω for CeCPE and CeBCPE, respectively. These fabricated electrodes were used as electrochemical sensors for cadmium ion estimation by optimizing the experimental parameters through differential pulse voltammetry. The optimized conditions included 10% modifier for CeCPE and 5% modifier for CeBCPE in 0.12 M HCl solution of pH 5 as supporting electrolyte at - 1.2 V deposition for 30 s in 0.01 to 10 mg L-1 linear cadmium solution range. Under these conditions, the limit of quantification (LOQ) of 0.368 mg L-1 and 0.005 mg L-1 was calculated for CeCPE and CeBCPE electrodes, respectively. The limit of detection (LOD) was calculated to be 0.121 mg L-1 and 0.002 mg L-1 for CeCPE and CeBCPE, respectively. All the experimental results indicated that electrodes fabricated from CeO2-Cu-BTC show better performance as compared to CeO2-based electrodes. Both these types of electrochemical sensors presented good repeatability and performance in the presence of interfering ions as well. From these findings, it can also be inferred that these electrochemical sensors can provide a simple and very sensitive method for approximation of toxic cadmium ions in aqueous solutions.

Root-Applied Cerium Oxide Nanoparticles and Their Specific Effects on Plants: A Review

With the pronounced increase in nanotechnology, it is likely that biological systems will be exposed to excess nanoparticles (NPs). Cerium oxide nanoparticles (CeO2 NPs) are among the most abundantly produced nanomaterials in the world. Their widespread use raises fundamental questions related to the accumulation in the environment and further interactions with living organisms, especially plants. NPs present in either soil or soilless environments are absorbed by the plant root systems and further transported to the aboveground parts. After entering the cytoplasm, NPs interact with chloroplast, nucleus, and other structures responsible for metabolic processes at the cellular level. In recent years, several studies have shown the impact of nanoceria on plant growth and metabolic processes. Research performed on different plants has shown a dual role for CeO2 NPs. The observed effects can be positive or negative and strongly depend on the plant species, characterization, and concentrations of NPs. This review describes the impact of root-applied CeO2 NPs on plant growth, photosynthesis, metal homeostasis, and parameters of induced oxidative stress.

Cerium oxide nanoparticles as a new neuroprotective agent to promote functional recovery in a rat model of sciatic nerve crush injury

BACKGROUND

Peripheral nerve injury is a common clinical disorder. The aim of the present study was to investigate the role of cerium oxide nanoparticles on axonal regeneration and functional recovery of the sciatic nerve after a crush injury in the rat model.

METHOD

A total of 40 adult male Wistar rats were divided into four groups. The animals underwent deep anesthesia. Afterward, the right sciatic nerve of rats was exposed and crushed. In two experimental groups, rats were treated intraperitoneally with cerium oxide nanoparticles at the dosage of 20 or 80 mg/kg daily for 1 week. The control group was given a vehicle. Then, during the nerve regeneration motor and sensory function recovery tests, histomorphometric evaluations, histological assessment of gastrocnemius muscle, and gastrocnemius muscle wet weights tests were performed.

RESULTS

Results demonstrated that the rate of nerve regeneration increased with the administration of cerium oxide nanoparticle in high doses. Also, the morphometric analysis showed that the number of myelinated fibers and myelin sheath thicknesses was significantly greater in the cerium oxide nanoparticle group versus the control group. Other parameters also improved in the cerium oxide nanoparticle treatment groups compared with the control group.

CONCLUSION

These data indicate that this nanoparticle has therapeutic potential and can be considered as a new treatment for nervous system regeneration.

Diabetic wound healing function of PCL/cellulose acetate nanofiber engineered with chitosan/cerium oxide nanoparticles

The use of cerium oxide nanoparticles (CeO2NPs) in diabetic wound repair substances has shown promising results. Therefore, the study was conducted to introduce a novel nano-based wound dressing containing chitosan nanoparticles encapsulated with green synthesized cerium oxide nanoparticles using Thymus vulgaris extract (CeO2-CSNPs). The physical properties and structure of the nanoparticles were analyzed using XRD, DLS, FESEM and FTIR techniques. The electrospun PCL/cellulose acetate-based nanofiber was prepared and CeO2-CSNPs were integrated on the PCL/CA membrane by electrospraying. The physicochemical properties, morphology and biological characteristics of the electrospun nanocomposite were evaluated. The results showed that the nanocomposite with 0.1 % CeO2-CSNPs exhibited high antibacterial performance against S. aureus (<58.59 µg/mL). The PCL/CA/CeO2-CSNPs nanofiber showed significant antioxidant activity up to 89.59 %, cell viability improvement, and cell migration promotion up to 90.3 % after 48 h. The in vivo diabetic wound healing experiment revealed that PCL/CA/CeO2-CSNPs nanofibers can significantly increase the repair rate of diabetic wounds by up to 95.47 % after 15 days. The results of this research suggest that PCL/CA nanofiber mats functionalized with CeO2-CSNPs have the potential to be highly effective in treating diabetes-related wounds.

Rare earth contamination of edible vegetation: Ce, La, and summed REE in fungi

The increasing and diversified use of rare earth elements (REE) is considered a potential source of pollution of environmental media including soils. This work documents critically overview data on the occurrence of REE in the fruiting bodies of wild and farmed species of edible and medicinal mushrooms, as this was identified as the largest published dataset of REE occurrence in foodstuff. Most of the literature reported occurrences of cerium (Ce) and lanthanum (La), but a number of studies lacked data on all lanthanides. The Ce, La, and summed REE occurrences were assessed through the criteria of environmental geochemistry, analytical chemistry, food toxicology, mushroom systematics, and ecology. Ce and La accumulate similarly in fruiting bodies and are not fractionated during uptake, maintaining the occurrence patterns of their growing substrates. Similarly, there is no credible evidence of variable REE uptake because the evaluated species data show natural, unfractionated patterns in accordance with the Oddo-Harkins' order of environmental lanthanide occurrence. Thus, lithosphere occurrence patterns of Ce and La as the first and the third most abundant lanthanides are reflected in wild and farmed mushrooms regardless of substrate and show that Ce is around twice more abundant than La. The current state of knowledge provides no evidence that mushroom consumption at these REE occurrence levels poses a health risk either by themselves or when included with other dietary exposure. Macromycetes appear to bio-exclude lanthanides because independently reported bioconcentration factors for different species and collection sites, typically range from < 1 to 0.001. This is reflected in fruiting body concentrations which are four to two orders of magnitude lower than growing substrates. KEY POINTS: •Original REE occurrence patterns in soils/substrates are reflected in mushrooms •No evidence for the fractionation of REE during uptake by fungi •Mushrooms bio-exclude REE in fruiting bodies.

Surface-Engineered Titanium with Nanoceria to Enhance Soft Tissue Integration Via Reactive Oxygen Species Modulation and Nanotopographical Sensing

The design of implantable biomaterials involves precise tuning of surface features because the early cellular fate on such engineered surfaces is highly influenced by many physicochemical factors [roughness, hydrophilicity, reactive oxygen species (ROS) responsiveness, etc.]. Herein, to enhance soft tissue integration for successful implantation, Ti substrates decorated with uniform layers of nanoceria (Ce), called Ti@Ce, were optimally developed by a simple and cost-effective in situ immersion coating technique. The characterization of Ti@Ce shows a uniform Ce distribution with enhanced roughness (∼3-fold increase) and hydrophilicity (∼4-fold increase) and adopted ROS-scavenging capacity by nanoceria coating. When human gingival fibroblasts were seeded on Ti@Ce under oxidative stress conditions, Ti@Ce supported cellular adhesion, spreading, and survivability by its cellular ROS-scavenging capacity. Mechanistically, the unique nanocoating resulted in higher expression of amphiphysin (a nanotopology sensor), paxillin (a focal adhesion protein), and cell adhesive proteins (collagen-1 and fibronectin). Ti@Ce also led to global chromatin condensation by decreasing histone 3 acetylation as an early differentiation feature. Transcriptome analysis by RNA sequencing confirmed the chromatin remodeling, antiapoptosis, antioxidant, cell adhesion, and TGF-β signaling-related gene signatures in Ti@Ce. As key fibroblast transcription (co)factors, Ti@Ce promotes serum response factor and MRTF-α nucleus localization. Considering all of this, it is proposed that the surface engineering approach using Ce could improve the biological properties of Ti implants, supporting their functioning at soft tissue interfaces and utilization as a bioactive implant for clinical conditions such as peri-implantitis.

Synthesis and characterization of polysiphonia/cerium oxide/nickel oxide nanocomposites for the removal of toxins from contaminated water and antibacterial potential

Due to massive industrial development, organic and inorganic wastes are very common in most industrial effluents from the pharmaceutical industry. Even in low concentrations, they are very dangerous and harmful to humans and other living organisms. Antibiotics are frequently detected in surface waters, in soil, in wastewater from sewage treatment plants, and even in drinking water. The major environmental threat they pose has prompted to search for effective and environmentally friendly means of eliminating these toxins. The biogenic synthesis of nanomaterials using natural herbal extracts has attracted considerable attention due to their low-cost, environmentally friendly and non-toxic nature, and as a reversal of various physical and chemical processes. The ceria nanoparticles (CeO2 NPs), nickel oxide nanoparticles (NiO NPs), and CeO2/NiO nanocomposites (CeO2/NiO NCS) were successfully prepared by simple biosynthetic routes using Polysiphonia urceolata algae extract as green surfactants and tested for toxic ofloxacin removal efficiency. The formed nanostructures were identified and characterized by various microscopic (FESEM-EDX, TEM, XRD, BET, and XPS) and spectroscopic (UV-Vis, FTIR, and TGA) methods. The adsorption/desorption of ofloxacin (OFX) on the surface of the nanomaterials was investigated under optimized conditions (initial dose 20 mg/L, agitation speed 250 rpm, pH 12, adsorbent dose 0.5 mg/L, and contact time 120 min). The removal efficiencies were 78%, 86%, and 94% for CeO2 NPs, NiO NPs and CeO2/NiO NCS, respectively, where OFX removal was found to be spontaneous, followed by Freundlich isotherm and pseudo-second order kinetic reaction model. The OFX adsorption mechanism on the nanomaterials involved the surface complexation via specific electrostatic attraction and H-bonding. The biogenic nanomaterials were also tested for their antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis and Staphylococcus aureus. The CeO2/NiO NCS exhibited the highest antibacterial activity with zone of inhibition (31.12 ± 0.59 mm) against S. epidermidis, followed by CeO2NPs and NiONPs with zones of inhibition (25.53 ± 1.2 mm) and (21.42 ± 0.6 mm) against P. aeruginosa and S. epidermidis, respectively. This study demonstrated the efficiency of the synthesized nanomaterials in removing toxins such as OFX from contaminated water and can serve as potential antibacterial and antioxidant agents. Notably, the heterogeneous nanomaterials demonstrated remarkable stability across a broad pH range, promising reusability and indicated tremendous potential of waste biomass reduction and OFX effluent treatment.

Unraveling Ros Conversion Through Enhanced Enzyme-Like Activity with Copper-Doped Cerium Oxide for Tumor Nanocatalytic Therapy

Nanozyme catalytic therapy for cancer treatments has become one of the heated topics, and the therapeutic efficacy is highly correlated with their catalytic efficiency. In this work, three copper-doped CeO2 supports with various structures as well as crystal facets are developed to realize dual enzyme-mimic catalytic activities, that is superoxide dismutase (SOD) to reduce superoxide radicals to H2 O2 and peroxidase (POD) to transform H2 O2 to ∙OH. The wire-shaped CeO2 /Cu-W has the richest surface oxygen vacancies, and a low level of oxygen vacancy (Vo) formation energy, which allows for the elimination of intracellular reactive oxygen spieces (ROS) and continuous transformation to ∙OH with cascade reaction. Moreover, the wire-shaped CeO2 /Cu-W displays the highest toxic ∙OH production capacity in an acidic intracellular environment, inducing breast cancer cell death and pro-apoptotic autophagy. Therefore, wire-shaped CeO2 /Cu nanoparticles as an artificial enzyme system can have great potential in the intervention of intracellular ROS in cancer cells, achieving efficacious nanocatalytic therapy.

Superoxide dismutase-like cerium dioxide hollow sphere-based highly specific photoelectrochemical biosensing for ascorbic acid

Conventional N-type semiconductor-based photoelectrochemical (PEC) sensors are difficult to achieve high selectivity for ascorbic acid (AA) detection in real samples because co-existing reducing agents act as hole sacrificial agents like AA to promote the increase of photocurrent. Cerium dioxide (CeO2) is a superoxide dismutase-like nanozyme with the reversible Ce3+/Ce4+ redox pair as well as one of alternative N-type semiconductors. To address the problem of PEC detection selectivity of AA, bifunctional CeO2 is a good choice. Herein, a novel and rational PEC biosensor for AA is constructed based on CeO2 hollow spheres as both AA superoxide dismutase-like nanozyme and the photoelectric beacon, which enable the PEC approach with high selectivity. In this protocol, AA can selectively induce a decrease in the CeO2-based photoanode current, which is significantly different from the conventional N-type semiconductor-based PEC sensor, this unique working mechanism is also proposed. The results show that the CeO2-based photocurrent response decreases linearly with AA concentrations in the ranges of 1 μM-600 μM and 600 μM-3000 μM, with a limit of detection of 0.33 μM. Moreover, the fabricated PEC biosensor has advantages of cost-effectiveness, replicability, and stability. Additionally, the sensor is competent for AA determination in practical settings and has achieved satisfactory results.

[Effects of cerium oxide nanoenzyme-gelatin methacrylate anhydride hydrogel in the repair of infected full-thickness skin defect wounds in mice]

Objective: To investigate the effects of cerium oxide nanoenzyme-gelatin methacrylate anhydride (GelMA) hydrogel (hereinafter referred to as composite hydrogel) in the repair of infected full-thickness skin defect wounds in mice. Methods: This study was an experimental study. Cerium oxide nanoenzyme with a particle size of (116±9) nm was prepared by hydrothermal method, and GelMA hydrogel with porous network structure and good gelling performance was also prepared. The 25 μg/mL cerium oxide nanoenzyme which could significantly promote the proliferation of human skin fibroblasts and had high superoxide dismutase activity was screened out. It was added to GelMA hydrogel to prepare composite hydrogel. The percentage of cerium oxide nanoenzyme released from the composite hydrogel was calculated after immersing it in phosphate buffer solution (PBS) for 3 and 7 d. The red blood cell suspension of mice was divided into PBS group, Triton X-100 group, cerium oxide nanoenzyme group, GelMA hydrogel group, and composite hydrogel group, which were treated with corresponding solution. The hemolysis of red blood cells was detected by microplate reader after 1 h of treatment. The bacterial concentrations of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli were determined after being cultured with PBS, cerium oxide nanoenzyme, GelMA hydrogel, and composite hydrogel for 2 h. The sample size in all above experiments was 3. Twenty-four 8-week-old male BALB/c mice were taken, and a full-thickness skin defect wound was prepared in the symmetrical position on the back and infected with MRSA. The mice were divided into control group without any drug intervention, and cerium oxide nanoenzyme group, GelMA hydrogel group, and composite hydrogel group applied with corresponding solution, with 6 mice in each group. The wound healing was observed on 3, 7, and 14 d after injury, and the remaining wound areas on 3 and 7 d after injury were measured (the sample size was 5). The concentration of MRSA in the wound exudation of mice on 3 d after injury was measured (the sample size was 3), and the blood flow perfusion in the wound of mice on 5 d after injury was observed using a laser speckle flow imaging system (the sample size was 6). On 14 d after injury, the wound tissue of mice was collected for hematoxylin-eosin staining to observe the newly formed epithelium and for Masson staining to observe the collagen situation (the sample size was both 3). Results: After immersion for 3 and 7 d, the release percentages of cerium oxide nanoenzyme in the composite hydrogel were about 39% and 75%, respectively. After 1 h of treatment, compared with that in Triton X-100 group, the hemolysis of red blood cells in PBS group, GelMA hydrogel group, cerium oxide nanoenzyme group, and composite hydrogel group was significantly decreased (P<0.05). Compared with that cultured with PBS, the concentrations of MRSA and Escherichia coli cultured with cerium oxide nanoenzyme, GelMA hydrogel, and composite hydrogel for 2 h were significantly decreased (P<0.05). The wounds of mice in the four groups were gradually healed from 3 to 14 d after injury, and the wounds of mice in composite hydrogel group were all healed on 14 d after injury. On 3 and 7 d after injury, the remaining wound areas of mice in composite hydrogel group were (29±3) and (13±5) mm2, respectively, which were significantly smaller than (56±12) and (46±10) mm2 in control group and (51±7) and (38±8) mm2 in cerium oxide nanoenzyme group (with P values all <0.05), but was similar to (41±5) and (24±9) mm2 in GelMA hydrogel group (with P values both >0.05). On 3 d after injury, the concentration of MRSA on the wound of mice in composite hydrogel group was significantly lower than that in control group, cerium oxide nanoenzyme group, and GelMA hydrogel group, respectively (with P values all <0.05). On 5 d after injury, the volume of blood perfusion in the wound of mice in composite hydrogel group was significantly higher than that in control group, cerium oxide nanoenzyme group, and GelMA hydrogel group, respectively (P<0.05). On 14 d after injury, the wound of mice in composite hydrogel group basically completed epithelization, and the epithelization was significantly better than that in the other three groups. Compared with that in the other three groups, the content of collagen in the wound of mice in composite hydrogel group was significantly increased, and the arrangement was also more orderly. Conclusions: The composite hydrogel has good biocompatibility and antibacterial effect in vivo and in vitro. It can continuously sustained release cerium oxide nanoenzyme, improve wound blood perfusion in the early stage, and promote wound re-epithelialization and collagen synthesis, therefore promoting the healing of infected full-thickness skin defect wounds in mice.

Fluorometric and colorimetric quantitative analysis platform for acid phosphatase by cerium ions-directed AIE and oxidase-like activity

A facile and sensitive fluorescent and colorimetric dual-readout assay for detection of acid phosphatase (ACP) was developed via Ce(III) ions-directed aggregation-induced emission (AIE) of glutathione-protected gold nanoclusters (GSH-AuNCs) and oxidase-mimicking activity of Ce(IV) ions. Free Ce(IV) ions exhibited a strong oxidase-mimetic activity, catalytically oxidizing colorless 3,3',5,5'-tetramethylbenzidine (TMB) into its blue product oxTMB in the presence of dissolved O2, thus triggering a remarkable color reaction detected visually. ACP can hydrolyze L-ascorbic acid-2-phosphate (AAP) with the production of ascorbic acid (AA). The AA is able to reduce Ce(IV) ions to Ce(III) ions, thus quenching the oxidase-mimetic activity of Ce(IV) ions. Meanwhile, Ce(III) ions induce AIE of GSH-AuNCs, resulting in the enhancement of the fluorescence signal of GSH-AuNCs. Both the fluorescent and colorimetric dual-mode analysis platforms exhibit a sensitive response to ACP, providing detection limits as low as 0.101 U/L and 0.200 U/L, respectively. Besides, this fabricated dual-mode detection platform holds the potential for analysis of ACP in human serum samples and screening inhibitors for ACP. With good performance and practicability, this study shows promising application in the convenient and reliable determination of ACP activity.

A dual catalytic functionalized hollow mesoporous silica-based nanocarrier coated with bacteria-derived exopolysaccharides for targeted delivery of irinotecan to colorectal cancer cells

In this study, we introduced a multifunctional hollow mesoporous silica-based nanocarrier (HMSN) for the targeted delivery of irinotecan (IRT) to colorectal cancer cells. Due to their large reservoirs, hollow mesoporous silica nanoparticles are suitable platforms for loading significant amounts of drugs for sustained drug release. To respond to pH and redox, HMSNs were functionalized with cerium and iron oxides. Additionally, they were coated with bacterial-derived exopolysaccharide (EPS) as a biocompatible polymer. In vitro analyses revealed that cytotoxicity induced in cancer cells through oxidative stress, mediated by mature nanocarriers (EPS.IRT.Ce/Fe.HMSN), was surprisingly greater than that caused by free drugs. Cerium and iron ions, in synergy with the drug, were found to generate reactive oxygen species when targeting the acidic pH within lysosomes and the tumor microenvironment. This, in turn, triggered cascade reactions, leading to cell death. In vivo experiments revealed that the proposed nanocarriers had no noticeable effect on healthy tissues. These findings indicate the selective delivery of the drug to cancerous tissue and the induction of antioxidant effects due to the dual catalytic properties of cerium in normal cells. Accordingly, this hybrid drug delivery system provides a more effective treatment for colorectal cancer with the potential for cost-effective scaling up.

Combined effect of Cerium oxide nanoparticles loaded scaffold and photobiomodulation therapy on pain and neuronal regeneration following spinal cord injury: an experimental study

BACKGROUND

Spinal cord injury (SCI) remained one of the challenges to treat due to its complicated mechanisms. Photobiomodulation therapy (PBMT) accelerates neuronal regeneration. Cerium oxide nanoparticles (CeONPs) also eliminate free radicals in the environment. The present study aims to introduce a combined treatment method of making PCL scaffolds as microenvironments, seeded with CeONPs and the PBMT technique for SCI treatment.

METHODS

The surgical hemi-section was used to induce SCI. Immediately after the SCI induction, the scaffold (Sc) was loaded with CeONPs implanted. PBMT began 30 min after SCI induction and lasted for up to 4 weeks. Fifty-six male rats were randomly divided into seven groups. Glial fibrillary acidic protein (GFAP) (an astrocyte marker), Connexin 43 (Con43) (a member of the gap junction), and gap junctions (GJ) (a marker for the transfer of ions and small molecules) expressions were evaluated. The behavioral evaluation was performed by BBB, Acetone, Von Frey, and radiant heat tests.

RESULT

The SC + Nano + PBMT group exhibited the most remarkable recovery outcomes. Thermal hyperalgesia responses were mitigated, with the combined approach displaying the most effective relief. Mechanical allodynia and cold allodynia responses were also attenuated by treatments, demonstrating potential pain management benefits.

CONCLUSION

These findings highlight the potential of PBMT, combined with CeONPs-loaded scaffolds, in promoting functional motor recovery and alleviating pain-related responses following SCI. The study underscores the intricate interplay between various interventions and their cumulative effects, informing future research directions for enhancing neural repair and pain management strategies in SCI contexts.

Cerium oxide nanoparticles impact on sepsis-induced cerebral injury: Deciphering miRNA / NF-κB/TLR signalling pathway

Sepsis is regarded as an inflammatory syndrome that consists of complex biochemical and pathophysiological dysregulation, brought on by endogenous factors in response to systemic infection. Sepsis can cause short- and long-term cerebral injury. Cerium oxide nanoparticles (CeO2 NPs) have been reported to possess both anti-inflammatory and antioxidative properties. The current study investigated the potential role of cerium oxide nanoparticles in the management of sepsis-induced brain injury. To achieve this target, forty male albino rats were divided into 4 groups, ten rats each. Group (i) set as a shame group. Group (ii) set as shame group administrated CeO2 NPs. Group (iii) septic group treated with saline and Group (iv) septic group treated with CeO2 NPs. The sepsis model in rats was induced by cecal ligation and puncture (CLP). Results showed CeO2 NPs administration resulted in significant improvement in the survival rate of rats, suppression in serum sepsis biomarkers (CRP, ESM-1, PCT and D- dimer), amelioration of brain inflammatory mediators (TNF-α- IL-6, NF-kB and LTB4) as well as apoptotic markers (Cas-3 and BAX). Furthermore, immunomodulation of miRNAs expression (155,124 and 146a). These findings demonstrate a promising pivotal role of CeO2 NPs treatment in alleviating the deleterious effects induced by sepsis in the brain.

Ce-doped MgO films on AZ31 alloy substrate for biomedical applications: preparation, characterization and testing

Magnesium ions, MgO nanoparticles and thin films, magnesium alloys and cerium compounds are materials intensively studied due to their corrosion protection, antibacterial and pharmacological properties. In this work, we have designed, prepared and investigated, novel thin films of MgO doped with cerium, deposited on Mg alloy (AZ31) for temporary implants, in order to enhance their life time. More precisely, we report on microstructure and corrosion behavior of MgO pure and doped with 0.1 at % Ce films, fabricated by sol-gel route coupled with spin-coating technique, on AZ31 alloy substrate. A modified sol-gel method that start from magnesium acetylacetonate, cerium nitrate and 2-methoxyethanol (as a stabilizer for the sol) was been used successfully for cerium doped MgO sol precursor preparation. The structure and morphology of the surface of the coatings, before and after immersion for 7-30 d in Hank's solution at 37 °C, were characterized by x-ray diffraction (XRD), scanning electron microscopy, high-resolution transmission electron microscope, x-ray photoelectron spectroscopy and Fourier infrared transmittance spectrum (FT-IR). A comparison between the corrosion protection of undoped MgO and MgO doped with 0.1 at % Ce coatings on the AZ31 alloy substrate is performed by electrochemical tests and immersion tests using open circuit potential and electrochemical impedance spectroscopy in Hank's solution, at 37 °C. The electrochemical results showed that the protection of the AZ31 alloy substrate against corrosion was better with the doped with 0.1 at % Ce MgO film deposited than with pure MgO coting. The investigations of the films after immersion in Hank's solution, at 37 °C, for 7, 21 and 30 d indicated that the grown layer on the film is bone like apatite that suggests a good bioactivity of 0.1 at % Ce-doped MgO coating. Our work demonstrates that the performance corrosion protection of the biodegradable magnesium alloys used for orthopedic applications, in simulated physiological environments (Hank and Ringer) can be enhanced through coating with Ce3+doped MgO sol-gel thin film.

Tailoring the Structural and Optical Properties of Cerium Oxide Nanoparticles Prepared by an Ecofriendly Green Route Using Plant Extracts

The present study explores an environmentally friendly green approach to obtain cerium oxide nanoparticles via a biomediated route using Mellisa officinalis and Hypericum perforatum plant extracts as reducing agents. The as-prepared nanoparticles were studied for their structural and morphological characteristics using XRD diffractometry, scanning electron microscopy, Raman, fluorescence and electronic absorption spectra, and X-ray photoelectron spectroscopy (XPS). The XRD pattern has shown the centered fluorite crystal structure of cerium oxide nanoparticles with average crystallite size below 10 nm. These observations were in agreement with the STEM data. The cubic fluorite structure of the cerium oxide nanoparticles was confirmed by the vibrational mode around 462 cm-1 due to the Ce-08 unit. The optical band gap was estimated from UV-Vis reflectance spectra, which was found to decrease from 3.24 eV to 2.98 eV. A higher specific area was determined for the sample using M. officinalis aqueous extract. The EDX data indicated that only cerium and oxygen are present in the green synthesized nanoparticles.

Environmental risk of ion-absorbed rare earth ores: concentration of leaching agent and fractionation of Pb

Rare earth (RE) is an important strategic resource; however, there has been a growing concern about the environmental problems caused by RE mining, such as ammonia nitrogen pollution and heavy metal pollution. There is a limited research about the behavior of leaching agents and the fractionation of RE and heavy metal during the mining process for ion adsorption of rare earth ore (IRE-ore) in the previously available papers. In this study, (NH4)2SO4 solution, which commonly used in the production of mining IRE-ore, was used as a leaching agent. The adsorption behavior of ore soils on ammonium ions was explored by batch experiments. The adsorption process of IRE-ore on ammonium ions followed a pseudo-second-order equation and was controlled by the kinetics of surface adsorption and intra-particle diffusion; the ammonium ion adsorption isotherm conformed to the Freundlich isotherm equilibrium equation, and the higher concentration advantage made the ore soils possess a higher adsorption capacity of ammonium ion. In addition, the fractionation characteristics of lanthanum (La), cerium (Ce), and lead (Pb) in the ore soil during the leaching process were simulated based on the batch and column leaching experiments. The results demonstrated that the exchangeable states of La and Ce in IRE-ore were high, and the exchangeable, carbonate-bound La and Ce were almost all leached out by (NH4)2SO4 leaching agent, while the most of exchangeable Pb flowed out along with leaching agent, and a small amount of leached Pb in the ore soil was converted to iron and manganese oxide-bound Pb and enriched in the direction of migration of the leaching solution, and when the environment (e.g., pH and Eh) changed, this part of Pb may be re-activated. Our research might serve as crucial baseline knowledge for the adsorption of ammonium ions by ore soils, and provide a data reference for reducing the use of leaching agents and developing sustainable technologies for green mining of ion-adsorption RE ores.

Biosorption of rare earth elements from luminophores by G. sulphuraria (Cyanidiophytina, Rhodophyta)

Lanthanides are indispensable constituents of modern technologies and are often challenging to acquire from natural resources. The demand for REEs is so high that there is a clear need to develop efficient and eco-friendly recycling methods. In the present study, freeze-dried biomass of the polyextremophile Galdieria sulphuraria was employed to recover REEs from spent fluorescent lamps (FL) luminophores by pretreating the freeze-dried biomass with an acid solution to favour ion exchange and enhance the binding sites on the cell surface available for the metal ions. Lanthanides were extracted from the luminophores using sulfuric acid solutions according to standardised procedures, and the effect of biosorbent dosage (0.5-5 mg/ml) and biosorption time (5-60 min) were evaluated. The content of individual REEs in the luminophores and the resulting algal biomass were determined using inductively coupled plasma mass spectrometry (ICP-MS). The most abundant REE in the luminophores was yttrium (287.42 mg/g dm, 91.60% of all REEs), followed by europium (20.98 mg/g, 6.69%); cerium, gadolinium, terbium and lanthanum was in trace. The best biosorption performances were achieved after 5 min and at the lowest biosorbent dosage (0.5 mg/mL). The highest total metal amount corresponded to 41.61 mg/g dried mass, and yttrium was the most adsorbed metal (34.59 mg/g dm, 82.88%), followed by cerium (4.01 mg/g); all other metals were less than 2 mg/g. The rapidity of the biosorption process and the low biosorbent dosage required confirmed this microalga as a promising material for creating an eco-sustainable protocol for recycling REEs.

Polydopamine on Copper-Doped Cerium Dioxide Nanosheets as Peroxidase Mimics for the Intelligent Detection of Cholesterol

The catalytic ability of nanozymes has become an enzymology hotspot in the field of application. Most nanozymes were characterized to simultaneously have oxidase-like and peroxidase-like activities, but the practical application often focuses on certain activity; other complex activities may cause interference. The peroxidase-like activity (POD-like activity) of nanozymes have been widely used in the colorimetric detection of H2O2 or substances producing H2O2 as an intermediate, such as the detection of small biological molecules with the oxidative reaction of a chromogenic reagent in the presence of POD-like nanozymes. In this work, we used polydopamine (PDA) as the surface coating of Cu-CeO2 nanosheets (PDA@ Cu-CeO2), which enhanced peroxidase-like activity while inhibiting their oxidase-like activity, providing a feasible method for the sensitive determination of cholesterol by integrating visual colorimetric detection and a smartphone application as a readout. The absorbance intensity and RGB values displayed a linear range on cholesterol from 0.05 to 1.2 mM with the LOD (limit of detection) of 42.7 and 99.4 μM. In addition, the method is expected to apply in detecting cholesterol in human serum with acceptable accuracy.

Recovery of Ce and La from phosphogypsum leachate by adsorption using grape wastes

The present research aimed to evaluate the use of grape stalk in the adsorption of lanthanum and cerium to identify the best operating conditions enabling the application of the bioadsorbent in REEs leached from phosphogypsum. The grape stalk was characterized and showed an amorphous structure with a heterogeneous and very porous surface. Also, it was possible to identify the groups corresponding to carboxylic acids, phenols, alcohols, aliphatic acids, and aromatic rings. The pH effect study showed that the adsorption process of La3+ and Ce3+ ions was favored at pH 5.0. The adsorption kinetics followed the pseudo-second-order model. In just 20 min, 80% saturation was reached, while equilibrium was reached after 120 min. The adsorption isotherms were appropriately adjusted to the Langmuir model, and the maximum adsorption capacities were obtained at 298 K, which were 35.22 mg g-1 for La3+ and 37.99 mg g-1 for Ce3+. Furthermore, the adsorption process was favorable, spontaneous, and exothermic. In the study's second phase, phosphogypsum was leached with a sulfuric acid solution. Then, the adsorption of REEs was carried out under the experimental conditions of pH after leaching and pH 5.0 (adjustment carried out with sodium hydroxide solution) at 298 K for 120 min and with adsorbent dosages of 1 and 5 g L-1. This process resulted in removal percentages above 95% for the most abundant REEs, such as neodymium, lanthanum, and cerium, at pH 5.0 and a dosage of 5 g L-1, demonstrating the effectiveness of the bioadsorbent used. These results indicate the potential of using grape residue as a promising bioadsorbent in recovering rare earth elements from phosphogypsum leachate.

B4C/Ce co-modified Ti/PbO2 dimensionally stable anode: Facile one-step electrodeposition preparation and highly efficient electrocatalytic degradation of tetracycline

The application of PbO2 for electrochemical oxidation technology is limited by its low electrocatalytic activity and short service life. Herein, based on the facile one-step electrodeposition, we prepared a boron carbide (B4C) and cerium (Ce) co-modified Ti/PbO2 (Ti/PbO2-B4C-Ce) electrode to overcome these shortcomings. Compared with Ti/PbO2 electrode, the denser surface is displayed by Ti/PbO2-B4C-Ce electrode. Meanwhile, electrochemical characterization indicates that the introduction of B4C and Ce significantly enhance the electrochemical performance of PbO2 electrode. In degradation experiments, under optimized conditions (current density 20 mA cm-2, pH 9, 0.15 M Na2SO4 and 30 °C), the fully degradation of tetracycline (TC) can be completed within 30 min. Furthermore, the trapping experiment demonstrates that ∙OH and SO4·- radicals have a synergistic effect in the degradation process of TC. Based on results of liquid chromatography-mass spectrometer, the generated ·OH preferentially attacks amides, phenols and conjugated double bond groups in TC. Importantly, Ti/PbO2-B4C-Ce electrode maintains a constant degradation efficiency even after 10 recycling tests, and its service life is 2.4 times of traditional Ti/PbO2 electrode. Hence, Ti/PbO2-B4C-Ce electrode is a promising electrode for degradation of organic wastewater containing amides, phenols, and conjugated double bond groups.

A human health risk assessment of rare earth elements through daily diet consumption from Bayan Obo Mining Area, China

Rare earth elements (REEs) have been broad application in a range of industries, including the electronics industry, advanced materials, and medicine. However, health risks associated with REEs received increasing attention. 31 residents (16 males and 15 females) from Bayan Obo mining in Inner Mongolia, China, were enrolled in this study. In total, 677 food samples, the major human exposure matrices (drinking water and duplicate diets), and bio-samples (urine and blood) of 31 participants were obtained. The concentrations of REEs were measured to characterize their external and internal exposures, and the potential health risk of exposure to REE through the ingestion route was analyzed. The results revealed that the detection rate in blood samples (100%) is higher than in urine (32.86%), and only a few REEs were detected in water samples (8.06%), the urine concentrations were considerably lower than in blood. Exposure to REEs through drinking water was considered negligible compared to food intake. Lanthanum and cerium were the most concentrated REEs in food samples. Health risks were calculated based on a dose-response model, the total hazard quotients (THQ) values for all food groups were within normal levels, and the Monte Carlo simulation results show that the 5th, the 50th, and the 95th percentile values of HI were found as 1.45 × 10-2, 3.52 × 10-2, and 9.13 × 10-2, respectively, neither exceeds the threshold, indicating low health risks associated with food intake exposure for this area. The sensitivity results suggest that underweight people are at higher risk, cerium, lanthanum, and yttrium concentrations, and food intake contributes more to health risks. The use of probability distribution methods can improve the accuracy of the results. The cumulative health risk through food intake is negligible, and further attention should be paid to the health risk induced by other routes of exposure to REEs by the local residents.

Cerium ions immobilized magnetic graphite nitride decorated with L-Alanyl-L-Glutamine as new chelator for enrichment of phosphopeptides

Cerium ions immobilized magnetic graphite nitride material have been prepared using L-Alanyl-L-Glutamine as the new chelator. The resulting Fe3O4/g-C3N4-L-Ala-L-Gln-Ce4+, as an immobilized metal ion affinity chromatography (IMAC) sorbent, was reusable. This is due to the strong coordination interaction between L-Alanyl-L-Glutamine and cerium ions. After a series of characterizations, the magnetic nanocomposite showed high surface area, good hydrophilicity, positive electricity, and magnetic response. Fe3O4/g-C3N4-L-Ala-L-Gln-Ce4+ had high sensitivity (0.1 fmol), selectivity (α-/β-casein/bovine serum albumin, 1:1:5000), and good recyclability (10 cycles). A total of 647 unique phosphopeptides mapped to 491 phosphoproteins were identified from A549 cell lysate by nano LC-MS analysis.

Development and Characterization of Electrospun Composites Built on Polycaprolactone and Cerium-Containing Phases

The current study reports on the fabrication of composite scaffolds based on polycaprolactone (PCL) and cerium (Ce)-containing powders, followed by their characterization from compositional, structural, morphological, optical and biological points of view. First, CeO2, Ce-doped calcium phosphates and Ce-substituted bioglass were synthesized by wet-chemistry methods (precipitation/coprecipitation and sol-gel) and subsequently loaded on PCL fibres processed by electrospinning. The powders were proven to be nanometric or micrometric, while the investigation of their phase composition showed that Ce was present as a dopant within the crystal lattice of the obtained calcium phosphates or as crystalline domains inside the glassy matrix. The best bioactivity was attained in the case of Ce-containing bioglass, while the most pronounced antibacterial effect was visible for Ce-doped calcium phosphates calcined at a lower temperature. The scaffolds were composed of either dimensionally homogeneous fibres or mixtures of fibres with a wide size distribution and beads of different shapes. In most cases, the increase in polymer concentration in the precursor solution ensured the achievement of more ordered fibre mats. The immersion in SBF for 28 days triggered an incipient degradation of PCL, evidenced mostly through cracks and gaps. In terms of biological properties, the composite scaffolds displayed a very good biocompatibility when tested with human osteoblast cells, with a superior response for the samples consisting of the polymer and Ce-doped calcium phosphates.

High-energy interference-free K-lines synchrotron X-ray fluorescence microscopy of rare earth elements in hyperaccumulator plants

Synchrotron-based micro-X-ray fluorescence analysis (µXRF) is a nondestructive and highly sensitive technique. However, element mapping of rare earth elements (REEs) under standard conditions requires care, since energy-dispersive detectors are not able to differentiate accurately between REEs L-shell X-ray emission lines overlapping with K-shell X-ray emission lines of common transition elements of high concentrations. We aim to test REE element mapping with high-energy interference-free excitation of the REE K-lines on hyperaccumulator plant tissues and compare with measurements with REE L-shell excitation at the microprobe experiment of beamline P06 (PETRA III, DESY). A combination of compound refractive lens optics (CRLs) was used to obtain a micrometer-sized focused incident beam with an energy of 44 keV and an extra-thick silicon drift detector optimized for high-energy X-ray detection to detect the K-lines of yttrium (Y), lanthanum (La), cerium (Ce), praseodymium (Pr), and neodymium (Nd) without any interferences due to line overlaps. High-energy excitation from La to Nd in the hyperaccumulator organs was successful but compared to L-line excitation less efficient and therefore slow (∼10-fold slower than similar maps at lower incident energy) due to lower flux and detection efficiency. However, REE K-lines do not suffer significantly from self-absorption, which makes XRF tomography of millimeter-sized frozen-hydrated plant samples possible. The K-line excitation of REEs at the P06 CRL setup has scope for application in samples that are particularly prone to REE interfering elements, such as soil samples with high concomitant Ti, Cr, Fe, Mn, and Ni concentrations.

Hair-biomonitoring assessment of rare-earth-element exposure in residents of the largest rare-earth mining and smelting area of China

The long-term and large-scale mining of rare earth minerals may lead to an accumulation of rare earth elements (REEs) in the environment, posing potential health risks to residents. We collected scalp hair (n = 254) from residents of a smelting area, a mining area, and a reference area to clarify human exposure to REEs. The contents of 15 REEs investigated in human hair samples were notably higher in the mining and smelting areas than in the reference area. Significant differences between some REEs were observed between the mining and smelting areas, for instance, cerium (Ce), dysprosium, and praseodymium. In the study areas, exposure to different sources of REEs may be one of the factors that contributed to the variations of REE correlations and clusters in human hair. Furthermore, in the smelting area, Ce contents in hair decreased with increasing age of children. However, Ce contents in the hair of adults increased with age. In contrast, Ce accumulation continuously increased in the reference area residents' hair with age. Regression results indicated that age and location were more important than sex when considering the influence on REE accumulation in residents' hair. The results of this study may help policymakers to implement guidelines to alleviate residents' exposure to REE in mining and smelting areas.

Simultaneous Generation of Ammonia during Nitrile Waste Gas Purification over a Silver Single-Atom-Doped Ceria Catalyst

Catalytic elimination of toxic nitrile waste gas is of great significance for preserving the atmospheric environment, but achieving resource utilization during its destruction has been less explored. Herein, this study proposed a universal strategy for nitrile waste gas purification and NH3 generation simultaneously. The developed silver single-atom-doped ceria nanorod (Ag1/R-CeO2) was endowed with near complete mineralization and around 90% NH3 yield at 300-350 °C for the catalytic oxidation of both acetonitrile and acrylonitrile. The introduction of the Ag single atom created more surface oxygen vacancies, thereby promoting water activation to form abundant surface hydroxyl groups. As a benefit from this, the hydrolysis reaction of nitrile to generate NH3 was accelerated. Meanwhile, the electron transfer effect from the Ag atom to Ce and hydroxyl species facilitated NH3 desorption, which inhibited the oxidation of NH3. Moreover, the increased surface oxygen vacancies also promoted the mineralization of hydrolysis carbonaceous intermediates to CO2. In contrast, the Ag nanoparticle-modified sample possessed stronger reducibility and NH3 adsorption, leading to the excessive oxidation of NH3 to N2 and NOx. This work provided a useful guidance for resourceful purification of nitrile waste gas.

Synergistic Effects of Organic Ligands and Visible Light on the Reductive Dissolution of CeO2 Nanoparticles: Mechanisms and Implications for the Transformation in Plant Surroundings

Cerium oxide (CeO2) nanoparticles are one of the most important engineered nanomaterials with demonstrated applications in industry. Although numerous studies have reported the plant uptake of CeO2, its fate and transformation pathways and mechanisms in plant-related conditions are still not well understood. This study investigated the stability of CeO2 in the presence of organic ligands (maleic and citric acid) and light irradiation. For the first time, we found that organic ligands and visible light had a synergistic effect on the reductive dissolution of CeO2 with up to 30% Ce releases after 3 days, which is the highest release reported so far under environmental conditions. Moreover, the photoinduced dissolution of CeO2 in the presence of citrate was much higher than that in maleate, which are adsorbed on the surface of CeO2 through inner-sphere and outer-sphere complexation, respectively. A novel ligand-dependent photodissolution mechanism was proposed and highlighted: upon electron-hole separation under light irradiation, the inner-sphere complexed citrate is more capable of consuming the hole, prolonging the life of electrons for the reduction of Ce(IV) to Ce(III). Finally, reoxidation of Ce(III) by oxygen was observed and discussed. This comprehensive work advances our knowledge of the fate and transformation of CeO2 in plant surroundings.

Polydopamine Modified Ceria Nanorods Alleviate Inflammation in Colitis by Scavenging ROS and Regulating Macrophage M2 Polarization

Background

Inflammatory bowel disease (IBD) is closely related to higher intracellular oxidative stress. Therefore, developing a novel method to scavenge the harmful reactive oxygen species (ROS) and alleviate colon inflammation to treat IBD is a promising strategy.

Methods

CeO2@PDA-PEG (CeO2@PP) were synthesized by modifying ceria (CeO2) nanorods with polydopamine (PDA) and polyethylene glycol (PEG). The ROS scavenging ability of CeO2@PP was detected by using flow cytometry and confocal laser scanning microscope (CLSM). The anti-inflammatory ability of CeO2@PP was determined in vitro by treating lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. The biocompatibility of CeO2@PP was evaluated in vivo and in vitro. Moreover, the therapeutic effects of CeO2@PP in vivo were estimated in a dextran sulfate sodium salt (DSS)-induced colitis mouse model.

Results

Physicochemical property results demonstrated that PDA and PEG modification endowed CeO2 nanorods with excellent dispersibility and colloidal stability. CeO2@PP maintained superior enzyme-like activity, including superoxide dismutase (SOD) and catalase (CAT), indicating antioxidant ability. Moreover, in vitro results showed that CeO2@PP with PDA promotes LPS-induced RAW 264.7 macrophages into M2-type polarization. In addition, in vitro and in vivo results showed that CeO2@PP have great biocompatibility and biosafety. Animal experiments have shown that CeO2@PP have excellent anti-inflammatory effects against DSS-induced colitis and effectively alleviated intestinal mucosal injury.

Conclusion

The nanoplatform CeO2@PP possessed excellent antioxidant and anti-inflammatory properties for scavenging ROS and modulating macrophage polarization, which is beneficial for efficient colitis therapy.

Beyond antioxidation: Harnessing the CeO2 nanoparticles as a renoprotective contrast agent for in vivo spectral CT angiography

It is a challenging task to develop a contrast agent that not only provides excellent image contrast but also protects impaired kidneys from oxidative-related stress during angiography. Clinically approved iodinated CT contrast media are associated with potential renal toxicity, making it necessary to develop a renoprotective contrast agent. Here, we develop a CeO2 nanoparticles (NPs)-mediated three-in-one renoprotective imaging strategy, namely, i) renal clearable CeO2 NPs serve as a one-stone-two-birds antioxidative contrast agent, ii) low contrast media dose, and iii) spectral CT, for in vivo CT angiography (CTA). Benefiting from the merits of advanced sensitivity of spectral CT and K-edge energy of Cerium (Ce, 40.4 keV), an improved image quality of in vivo CTA is successfully achieved with a 10 times reduction of contrast agent dosage. In parallel, the sizes of CeO2 NPs and broad catalytic activities are suitable to be filtered via glomerulus thus directly alleviating the oxidative stress and the accompanying inflammatory injury of the kidney tubules. In addition, the low dosage of CeO2 NPs reduces the hypoperfusion stress of renal tubules induced by concentrated contrast agents used in angiography. This three-in-one renoprotective imaging strategy helps prevent kidney injury from being worsened during the CTA examination.

Fungal biorecovery of cerium as oxalate and carbonate biominerals

Cerium is the most sought-after rare earth element (REE) for application in high-tech electronic devices and versatile nanomaterials. In this research, biomass-free spent culture media of Aspergillus niger and Neurospora crassa containing precipitant ligands (oxalate, carbonate) were investigated for their potential application in biorecovery of Ce from solution. Precipitation occurred after Ce3+ was mixed with biomass-free spent culture media and >99% Ce was recovered from media of both organisms. SEM showed that biogenic crystals with distinctive morphologies were formed in the biomass-free spent medium of A. niger. Irregularly-shaped nanoparticles with varying sizes ranging from 0.5 to 2 μm and amorphous biominerals were formed after mixing the carbonate-laden N. crassa supernatant, resulting from ureolysis of supplied urea, with Ce3+. Both biominerals contained Ce as the sole metal, and X-ray diffraction (XRD) and thermogravimetric analyses identified the biominerals resulting from the biomass-free A. niger and N. crassa spent media as cerium oxalate decahydrate [Ce2(C2O4)3·10H2O] and cerium carbonate [Ce2(CO3)3·8H2O], respectively. Thermal decomposition experiments showed that the biogenic Ce oxalates and carbonates could be subsequently transformed into ceria (CeO2). FTIR confirmed that both amorphous and nanoscale Ce carbonates contained carbonate (CO32-) groups. FTIR-multivariate analysis could classify the biominerals into three groups according to different Ce concentrations and showed that Ce carbonate biominerals of higher purity were produced when precipitated at higher Ce3+ concentrations. This work provides new understanding of fungal biotransformations of soluble REE species and their biorecovery using biomass-free fungal culture systems and indicates the potential of using recovered REE as precursors for the biosynthesis of novel nanomaterials.

Oxidation and Nanoparticle Formation during Ce(III) Sorption onto Minerals

The sorption of Ce(III) on three abundant environmental minerals (goethite, anatase, and birnessite) was investigated. Batch sorption experiments using a radioactive ¹³⁹Ce tracer were performed to investigate the key features of the sorption process. Differences in sorption kinetics and changes in oxidation states were found in the case of the sorption of Ce(III) on birnessite compared to that on other minerals. Speciation of cerium onto all of the studied minerals was investigated using spectral and microscopic methods: high-resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), and X-ray absorption spectroscopy (XAS) in conjunction with theoretical calculations. It was found that during the sorption process onto birnessite, Ce(III) was oxidized to Ce(IV), while the Ce(III) on goethite and anatase surfaces remained unchanged. Oxidation of Ce(III) by sorption on birnessite was also accompanied by the formation of CeO₂ nanoparticles on the mineral surface, which depended on the initial cerium concentration and pH value.

Construction of fluorescence and colorimetric tandem dual-mode sensor by modulating fluorescence and oxidase-like activity via valence switching of cerium-based coordination polymer nanoparticles for sarcosine detection

A fluorescence and colorimetric tandem dual-mode sensor was established by modulating fluorescence and oxidase-like activity via valence switching of cerium-based coordination polymer nanoparticles (Ce-CPNs) for the detection of sarcosine (Sar) which is considered as a potential biomarker for the diagnosis of prostate cancer (PCa). In the present research, sarcosine oxidase (SOX) specifically catalyzes the oxidation of Sar to yield H₂O₂ which can rapidly oxidize Ce(III)-CPNs to generate Ce(IV)-CPNs in appropriate alkaline solution. The generated Ce(IV)-CPNs create a markedly weakened fluorescent signal at 350 nm, while they can induce oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue TMBox through emerging good oxidase-like activity. The sensing platform can realize accurate, stable, and high-throughput detection of Sar because of the tandem dual signal output mechanism. More attractively, the chromogenic hydrogel sensing device using smartphone photographing has achieved perfect results for the on-site sensing of Sar in urine specimens without large experimental equipments, demonstrating its considerable clinical application potential in the early diagnosis of PCa.

Fracking wastewater treatment: Catalytic performance and life cycle environmental impacts of cerium-based mixed oxide catalysts for catalytic wet oxidation of organic compounds

Water scarcity and the consequent increase of freshwater prices are a cause for concern in regions where shale gas is being extracted via hydraulic fracturing. Wastewater treatment methods aimed at reuse/recycle of fracking wastewater can help reduce water stress of the fracking process. Accordingly, this study assessed the catalytic performance and life cycle environmental impacts of cerium-based mixed oxide catalysts for catalytic wet oxidation (CWO) of organic contaminants, in order to investigate their potential as catalysts for fracking wastewater treatment. For these purposes, MnCeO_x and CuCeO_x were tested for phenol removal in the presence of concentrated NaCl (200 g L^-1), which represented a synthetic fracking wastewater. Removal of phenol in pure ("phenolic") water without NaCl was also considered for comparison. Complete (100 %) phenol and a 94 % total organic carbon (TOC) removal were achieved in both the phenolic and fracking wastewaters by utilising MnCeO_x (5 g L^-1) and insignificant metal leaching was observed. However, a much lower activity was observed when the same amount of CuCeO_x was utilised: 23.3 % and 20.5 % for phenol and TOC removals, respectively, in the phenolic, and 69.1 % and 63 % in the fracking wastewater. Furthermore, severe copper leaching from CuCeO_x was observed during stability tests conducted in the fracking wastewater. A life cycle assessment (LCA) study carried out as part of this work showed that the production of MnCeO_x had 12-98 % lower impacts than CuCeO_x due to the higher impacts of copper than manganese precursors. Furthermore, the environmental impacts of CWO were found to be 94-99 % lower than those of ozonation due to lower energy and material requirements. Overall, the results of this study suggest that the adoption of catalytic treatment would improve both the efficiency and the environmental sustainability of both the fracking wastewater treatment and the fracking process as a whole.

Biosorption kinetics of cerium(III) and cobalt(II) from liquid wastes using individual bacterial species isolated from low-level liquid radioactive wastes

The existence of toxic heavy metals in the aquatic environment has emphasized a considerable exigency to develop several multifunctional biosorbents for their removal. Herein, three individual bacterial species of Cellulosimicrobium cellulans, Bacillus coagulans, and Microbacterium testaceum were successfully isolated from low-level liquid radioactive wastes. Their loading capacities towards cerium and cobalt metal ions were inclusivity inspected under variable operational parameters of pH, primary pollutant concentration, interaction time, temperature, stirring speed, and biosorbent dosage. By analyzing the influence of solution pH, concentration, temperature, biosorbent mass, and agitation speed on the biosorption kinetics, the biosorption process confirms pseudo-second-order kinetic, intraparticle diffusion, and Elovich equation. Remarkably, the isolated Microbacterium testaceum exhibited high loading capacities reaching 68.1 mg g^-1, and 49.6 mg g^-1 towards Ce(III), and Co(II) ions, respectively, at the initial concentration of 2.8 mM, pH 4.5, and 25 °C. Overall, the isolated bacterial species can potentially be offered up as a promising scavenger for Ce(III) and Co(II) from liquid waste effluents.

Resource utilization of high-concentration SO2 for sulfur production over La-Ce-Ox composite oxide catalyst

Sulfur dioxide is one of the main causes of air pollution such as acid rain and photochemical smog, and its pollution control and resource utilization have become important research directions. La₂O₃ was incorporated into CeO₂ to enhance the surface basicity of La-Ce-O_x catalyst and increase the concentration of chemisorbed oxygen, thereby promoting the improvement of catalytic performance of SO₂ reduction by CO. Results have showed that the incorporation of La₂O₃ would not only increase the concentration of chemisorbed oxygen and hydroxyl on the catalyst surface, but also increase the basicity of the catalyst, thereby facilitating the adsorption of SO₂ on the catalyst surface. The 12%La-Ce-O_x was the optimal catalyst, and its SO₂ conversion at 350-400 ℃ reached close to 100%, and the sulfur yield at this temperature range was higher than 93%. Finally, according to the in situ infrared diffuse reflectance spectrum, it was found that the main reaction intermediates of 12%La-Ce-O_x in the catalytic reduction of SO₂ were weakly adsorbed sulfate, SO₃^2-, non-coordinating CO₃^2-, monodentate carbonate, and CO, so the catalytic reaction followed the L-H and E-R mechanisms simultaneously.

Modifying α-Al2O3 with cerium, zirconium, and sulfate for catalytic removal of C4F8

Modification of α-Al₂O₃ (A) with cerium (C), zirconium (Z), and sulfate (S) for effective C₄F₈ removal is evaluated at temperatures ≤ 650 °C. Catalytic hydrolysis of C₄F₈ is conducted to compare the performance of catalysts prepared (namely, A, AC, AZ, AS, ACS, and AZS). The interplay between rare earth element, acid amount, and surface area is further investigated. An investigation was carried out by characterization of catalysts by using XRD, BET, and NH₃-TPD. XRD pattern of the modified α-Al₂O₃ catalyst shows that the average grain size is 37 nm. BET analysis indicates that the surface area increases with the addition of Ce and Zr, while NH₃-TPD analysis shows the improvement of acid sites after the addition of Ce, Zr, and SO₄^2-. The experimental results indicate that C₄F₈ conversion over A catalyst reaches 14.81% at 550 °C with the addition of 38% H₂O_(g). Under the same operating condition, C₄F₈ conversion efficiencies achieved with AC and AZ catalysts increase to 42.03% and 50.1%, respectively. Furthermore, the efficiencies over AS, ACS, and AZS catalysts increase to 49.85%, 86.94%, and 87.18%, respectively. Stability tests show that the performances of the catalysts for C₄F₈ conversion are with the order of AZS > ACS > AZ > AC > AS > A at 650 °C during 24 h. The activation energy of the AZS catalyst in catalytic hydrolysis of C₄F₈ is 60.49 kJ/mol. The products of C₄F₈ conversion mainly include CO₂, CO, and COF₂ and small amounts of CHF₃ and C₂F₄. This study has confirmed that the AZS catalyst shows the best activity, acidity, and stability on C₄F₈ removal.

Visual detection of vitamin C in fruits and vegetables using UiO-66 loaded Ce-MnO2 mimetic oxidase

A nanocomposite (UiO-66/Ce-MnO₂) was fabricated by combining UiO-66 with cerium-doped manganese dioxide (Ce-MnO₂) for colorimetric detecting vitamin C (Vc). Compared with traditional artificial enzymes, the as-synthesized UiO-66/Ce-MnO₂ were simple to prepare and did not require the participation of other active substances. The doping of cerium increased the oxygen vacancies and the UiO-66 as a carrier improved the dispersibility. The formation of superoxide anion (O₂^-) and the inside Ce⁴⁺/Ce³⁺ and Mn⁴⁺/Mn³⁺ redox couples of UiO-66/Ce-MnO₂ endowed UiO-66/Ce-MnO₂ with a high catalytic capability, which could catalytically oxidize 3, 3', 5, 5'-tetramethylbenzidine (TMB) into oxidation state TMB (oxTMB) without H₂O₂, accompanying with color change and a prominent peak at 652 nm in UV-vis spectra. Based on the inhibitory effects of Vc on catalytic oxidation of TMB, detection of Vc can be achieved, exhibiting a linear relationship in the concentration of 1.13-17.01 μmol L^-1 with a low detection limit of 65.82 nmol L^-1. This system can also be detected by smartphone, the linear detection range is 12.47-22.67 μmol L^-1. Vc contents in fruits and vegetables detected by the sensor were in good agreement with the 2, 4-Dinitrophenylhydrazine colorimetry method (P > 0.05), indicating a reliable sensor for Vc detection.

Pt/CeO2 coated with polyoxometallate chainmail to regulate oxidation of chlorobenzene without hazardous by-products

Doping noble metal and acid functionalization were both valid approaches to facilitate oxidation of chlorobenzene on CeO₂-based catalysts, but their promotion effects were influenced by different orders of modification process. Because of strong interaction between metal and support and proper redox nature of CeO₂, Pt NPs were re-dispersed into single atoms on CeO₂ surface via "ex-solution". Companied with Pt loading, the enhancement of oxidizing ability led to generation of polychlorinated by-products. Herein, CeO₂-supported Pt was coated by HSiW chainmail to protect Pt from being exposed to Cl-contained atmosphere, and HSiW coating promoted activation of chlorobenzene. The as-prepared chainmail catalyst of HSiW/Pt/CeO₂ displayed a remarkable performance in catalyzing oxidation of chlorobenzene without any dichlorobenzene at realistic condition. By comparison, other catalysts with exposed Pt suffered from production of toxic by-products.

Scintillation characteristics of chemically processed Ce:GAGG single crystals

We investigated the correlation between the surface finish and luminescence properties of chemically polished cerium-doped single-crystal Gd3Al2Ga3O12 scintillators (Ce:GAGG), from the crystallographic perspective. The intrinsic defects in the crystals were identified via photoluminescence spectroscopy followed by scanning electron microscopy and X-ray diffraction to analyze their surface morphologies. Finally, the samples were individually wrapped with an enhanced specular reflector (ESR), coupled with a photomultiplier tube, placed inside a dark box, connected to a digitizer, and irradiated with a 137Cs radioactive source to evaluate the relative light (signal) output and energy resolution of each sample. The as-cut (rough) Ce:GAGG single-crystal samples, that were chemically polished with phosphoric acid at 190°C in air for 60 min, demonstrated a 33.1% increase in signal amplitude (light output to photosensor) and 2.4% (absolute value) improvement in energy resolution, which were comparable to those obtained for the mechanically polished sample. For these samples, the surface roughness was found to be ~430 nm, which was approximately half of that of the mechanically polished sample. The chemical polishing method used in this study is a cost-effective and straightforward technique to improve structural imperfections and can facilitate the treatment of inorganic scintillators with complex shapes and/or on a large scale.

Alternative Strategy to Optimize Cerium Oxide for Enhanced X-ray-Induced Photodynamic Therapy

The emergence of X-ray-induced photodynamic therapy (X-PDT) holds tremendous promise for clinical deep-penetrating cancer therapy. However, the clinical application of X-PDT in cancer treatment is still limited due to the hypoxic property of cancerous tissue, the inherent antioxidant system of tumor cells, and the difficulty in matching the absorption spectra of photosensitizers. Herein, a versatile core-shell radiosensitizer (SCNPs@DMSN@CeO_x-PEG, denoted as SSCP) was elaborately designed and constructed to enhance X-PDT by coating tunable mesoporous silica on nanoscintillators, followed by embedding the cerium oxide nanoparticles in situ. The obtained SSCP radiosensitizer demonstrated a distinct blue-shift in the ultraviolet light region, so that it could perfectly absorb the ultraviolet light converted by the SCNPs core, resulting in the formation of photoinduced electron-hole (e^--h⁺) pairs separation to generate reactive oxygen species (ROS). In addition, the cerium oxide exhibits high glutathione consumption to heighten ROS accumulation, and catalase-like activity to alleviate the hypoxia, which further enhances the efficiency of radiotherapy. Benefiting from the abundant Lu and Ce elements, the computed tomography imaging performance of SSCP is about 3.79-fold that of the clinical contrast agent (iohexol), which has great potential in both preclinical imaging and clinical translation.

Novel Ce-based coordination polymer nanoparticles with excellent oxidase mimic activity applied for colorimetric assay to organophosphorus pesticides

Cerium, as a lanthanide, has attracted considerable interest because of its excellent catalytic activity. Here, we propose a novel cerium-based coordination polymer nanoparticles named DPA-Ce-GMP, which have excellent oxidase-mimicking properties. Furthermore, a colorimetric probe that can act as an inhibitor to suppress the activity of acetylcholinesterase (AChE) was developed for detecting organophosphorus pesticides (OPs). DPA-Ce-GMP catalyzes colorless 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue color, and AChE catalyzes acetylthiocholine to produce thiocholine (TCh), which can weaken DPA-Ce-GMP-catalyzed TMB. After the addition of OPs, the enzymatic activity of AChE was inhibited to produce less amount of TCh, resulting in more DPA-Ce-GMP-catalyst oxidized TMB to show an increasing blue color. Dichlorvos, as the samples, with the limit of 0.024 μg/L. Overall, we believe that the colorimetric probe can be used for the rapid, low-cost, and large-scale field detection of OPs in food samples.

A review of the application of cerium and lanthanum in phosphorus removal during wastewater treatment: Characteristics, mechanism, and recovery

Owing to their strong bond with anions, rare earth elements (REEs) are prime contenders in wastewater treatment to meet the stringent phosphorus (P) effluent quality requirements. REEs outcompete traditional metals to abate phosphorus. The application of lanthanides in wastewater treatment is mainly through adsorption, where REEs are incorporated into a carrier matrix to improve the adsorption capacity. As coagulants, information on the performance of lanthanides is lacking. In this review, the performance of major water coagulants (iron and aluminum) is discussed and compared to two lanthanides: cerium and lanthanum. The use of lanthanides as adsorbents and as coagulants is elucidated during P treatment. The recovery of P and REEs is also discussed. Where details were lacking in the literature, experiments were conducted to fill these research gaps. Using REEs as adsorbents limits their P precipitation potential; as coagulants, REE capacity is 520.79 mg P/g La³⁺ and 469.96 mg P/g Ce³⁺. In addition, as coagulants, they are not affected by pH (3.0 < pH < 10.0); however, carbonates and sulfate are the major species that can reduce the performance of REEs during P treatment. REE-P precipitation is orchestrated through the formation of an REE-PO₄ bond. Unfortunately, this strong bond between lanthanides and phosphate makes phosphate recovery almost impractical. If the goal is to recover REEs and reuse P in other applications like fertilizers, REEs are not the best candidates. We recommend additional research dedicated to understanding lanthanide coagulants in typical wastewater treatment facilities and their release from phosphate precipitates under different environmental conditions.

Facile one-step preparation of Co and Ce doped TiO2 in visible light PMS activation for PAHs degradation

In this work, Co and Ce doped TiO₂ (CoCeTi) with low content of Co and Ce was successfully prepared by a facile one-step sol-gel solvothermal process for activating Peroxymonosulfate (PMS) to degrade Polycyclic aromatic hydrocarbons (PAHs). The phenanthrene degradation rate was 98.2% effectively in 15 min by CoCeTi (50.0 mg/L) activation PMS (0.50 mmol/L) under visible light. SO₄^•-, O₂^•-, h⁺ and ¹O₂ were verified as the dominant reactive species for PAHs degradation. The collective effect of CoCeTi, PMS and visible light irradiation has been discussed. The possible phenanthrene degradation pathway was proposed through intermediates analysis. CoCeTi composed of Co₃O₄, CeO₂ and TiO₂ was confirmed. Outstandingly, CoCeTi/PMS/visible light system has very low cobalt (0.036 mg/L) and cerium (0.27 mg/L) leaching. Due to CoCeTi having good activated PMS properties and other excellent characteristics, it has potential application for PAHs or other organic pollutants degradation.