Low-Cost and Scaled-Up Production of Fluorine-Free, Substrate-Independent, Large-Area Superhydrophobic Coatings Based on Hydroxyapatite Nanowire Bundles

Hydroxyapatite and its composite in heavy metal decontamination: Adsorption mechanisms, challenges, and future perspective

Nanohydroxyapatite (n-HAP), recognized by its peculiar crystal architecture and distinctive attributes showcased the underlying potential in adsorbing heavy metal ions (HMI). In this paper, the intrinsic mechanism of HMI adsorption by n-HAP was first revealed. Subsequently, the selectivity and competitiveness of n-HAP for HMI in a variety of environments containing various interferences from cations, anions, and organic molecules are elucidated. Next, n-HAP was further categorized according to its morphological dimensions, and its adsorption properties and intrinsic mechanisms were investigated based on these different morphologies. It was shown that although n-HAP has excellent adsorption capacity and cost-effectiveness, its application is often challenging to realize due to its inherent fragility and agglomeration, the technical problems required for its handling, and the difficulty of recycling. Finally, to address these issues, this paper discusses the tendency of n-HAP and its hybridized/modified materials to adsorb HMI as well as the limitations of their applications. By summarizing the limitations and future directions of hybridization/modification HAP in the field of HMI contamination abatement, this paper provides insightful perspectives for its gradual improvement and rational application.

Transferrable Electrospinning Nanofiber Meshes as Strongly Adhered Scaffolds for Slippery Liquid-Infused Porous Surfaces

Slippery liquid-infused porous surfaces (SLIPS) are self-healing protective coatings that can be made by infiltration of a porous scaffold with a chemically resistant oil. A popular method to apply a SLIPS coating is using electrospinning to deposit a nanofiber mesh onto the intended substrate. However, electrospinning only lightly deposits the nanofibers onto the intended substrate, so the coating detaches easily even when unintended. We report a simple, yet effective, solution to the adhesion problem. Electrospun nanofiber meshes are typically well entangled and cohesive, so they can be detached from the electrospinning target and transferred onto the final target. Using a thin layer of adhesive on the intended surface, the electrospinning mesh can be securely attached and infiltrated with protective oil to yield a more stable SLIPS coating. An adhered coating can be submerged under corrosive solution and repeatedly self-heal from damage to the same spot. With the electrospun nanofiber meshes' flexibility and stretchability, the meshes can be fitted around a wide range of targets including ones that are otherwise difficult to apply a nanofiber mesh on. The use of an adhesive interlayer between the nanofiber mesh and substrate is a simple solution to improve coating stability, and the solution facilitates application of SLIPS onto a broader range of substrates.

The preparation of hydroxyapatite nanowires and nanorods via aliphatic micelles as soft templates

Hydroxyapatite nanoparticles were tunably synthesized via the use of an aliphatic–ethanol–water three-phase mixture system using micelles as soft templates via an emulsion–hydrothermal synergistic method.

Customized Cellulose Fiber Paper Enabled by an In Situ Growth of Ultralong Hydroxyapatite Nanowires

Cellulose fiber (CF) paper is a low-cost, sustainable, and flexible substrate, which has gained increasing interest recently. Before practical usage, the functionalization of the pristine CF paper is indispensable to meet requirements of specific applications. Different from conventional surface modification or physical mixing methods, we report in situ growth of ultralong hydroxyapatite nanowires (HAPNWs) with lengths larger than 10 μm on the CF paper. HAPNWs are radially aligned on the surface of CFs, creating a micro/nanoscale hierarchical structure. By means of the excellent ion exchange ability of HAP and the hierarchical structure, the functions of the CF paper can be easily customized. As a proof-of-concept, we demonstrate two kinds of functional CF paper: (1) the photoluminescent CF paper by doping Eu³⁺ and Tb³⁺ ions into the crystal lattice of HAPNWs and (2) the superhydrophobic CF paper by coating poly(dimethylsiloxane) on the HAPNW hierarchical structure, which can be applied for self-cleaning and oil/water separation. It is expected that an in situ growth of ultralong HAPNWs will provide an instructive guideline for designing a CF paper with specific functions.

Facile synthesis of ultralong hydroxyapatite nanowires using wormlike micelles as soft templates

Ultralong hydroxyapatite nanowires were synthesized by formation of an entangled long wormlike micelle structure in a three-phase reaction system.

Superamphiphobic coatings with antifouling and nonflammable properties using functionalized hydroxyapatite

Functional superamphiphobic coatings have attracted much attention due to their promising application prospects in oil transportation and anti-contamination, which call for the requirements of flame retardancy.

Hydroxyapatite Nanowire-Reinforced Poly(ethylene oxide)-Based Polymer Solid Electrolyte for Application in High-Temperature Lithium Batteries

Hybrid polymer electrolytes with excellent performance at high temperatures are very promising for developing solid-state lithium batteries for high-temperature applications. Herein, we use a self-supporting hydroxyapatite (HAP) nanowire membrane as a filler to improve the performance of a poly(ethylene oxide) (PEO)-based solid-state electrolyte. The HAP membrane could comprehensively improve the properties of the hybrid polymer electrolyte, including the higher room-temperature ionic conductivity of 1.05 × 10^-5 S cm^-1, broad electrochemical windows of up to 5.9 V at 60 °C and 4.9 V at 160 °C, and a high lithium-ion migration of 0.69. In addition, the LiFePO₄//Li full battery with a solid electrolyte possesses good rate capability, cycling, and Coulomb efficiency at extreme high temperatures, that is, after 300 continuous charge and discharge cycles at 4 C rate, the discharge capacity retention rate is 77% and the Coulomb efficiency is 99%. The use of the flexible self-supporting HAP nanowire membrane to improve the PEO-based solid composite electrolyte provides new strategies and opportunities for developing rechargeable lithium batteries in extreme high-temperature applications.

A bioinspired lubricant infused surface with transparency, hot liquid boiling resistance and long-term stability for food applications

Inspired by the Nepenthes pitcher plant, the HAP and oleic acid prepared Lubricant Infused Surface (LIS) that exhibits liquid repellency and slipperiness has huge potential in various fields.

Assessment of Super-Hydrophobic Textured Coatings on AA6082 Aluminum Alloy

Superhydrophobicity is one of the most required surface properties for a wide range of application such as self-cleaning, anti-corrosion, oil-water separation, anti-icing, and anti-bioadhesion. Recently, several methods have been developed to produce nature inspired super-hydrophobic surfaces. Nevertheless, these methods require a complicated process and expensive equipment. In order to overcome these issues, we propose three different methods to obtain nature-inspired super-hydrophobic surfaces: short-term treatment with boiling water, HF/HCl and HNO3/HCl concentrated solution etching. Afterwards, a thin layer of octadecylsilane was applied by in situ polymerization on all pre-treated surfaces. Eventually, all substrates were dried for 3 h at 100 °C to complete the silane curing. Scanning electron microscopy (SEM), contact angle measuring system and atomic force microscope (AFM) were used to characterize the surfaces. Surface morphology analysis showed that each method results in a specific dual hierarchical nano-/micro-structure. The corresponding water contact angles ranged from 160° to nearly 180°. The best results were observed for HF etched Al 6082 surface were water contact angle above 175° was achieved. Furthermore, a scheme able to assess the relationship between hydrophobic behavior and surface morphology was finally proposed.

Biomolecule-assisted green synthesis of nanostructured calcium phosphates and their biomedical applications

Calcium phosphates (CaPs) are ubiquitous in nature and vertebrate bones and teeth, and have high biocompatibility and promising applications in various biomedical fields. Nanostructured calcium phosphates (NCaPs) are recognized as promising nanocarriers for drug/gene/protein delivery owing to their high specific surface area, pH-responsive degradability, high drug/gene/protein loading capacity and sustained release performance. In order to control the structure and surface properties of NCaPs, various biomolecules with high biocompatibility such as nucleic acids, proteins, peptides, liposomes and phosphorus-containing biomolecules are used in the synthesis of NCaPs. Moreover, biomolecules play important roles in the synthesis processes, resulting in the formation of various NCaPs with different sizes and morphologies. At room temperature, biomolecules can play the following roles: (1) acting as a biocompatible organic phase to form biomolecule/CaP hybrid nanostructured materials; (2) serving as a biotemplate for the biomimetic mineralization of NCaPs; (3) acting as a biocompatible modifier to coat the surface of NCaPs, preventing their aggregation and increasing their colloidal stability. Under heating conditions, biomolecules can (1) control the crystallization process of NCaPs by forming biomolecule/CaP nanocomposites before heating; (2) prevent the rapid and disordered growth of NCaPs by chelating with Ca2+ ions to form precursors; (3) provide the phosphorus source for the controlled synthesis of NCaPs by using phosphorus-containing biomolecules. This review focuses on the important roles of biomolecules in the synthesis of NCaPs, which are expected to guide the design and controlled synthesis of NCaPs. Moreover, we will also summarize the biomedical applications of NCaPs in nanomedicine and tissue engineering, and discuss their current research trends and future prospects.