Engineering a nanoscale liposome-in-liposome for in situ biochemical synthesis and multi-stage release

Soft-matter nanoscale assemblies such as liposomes and lipid nanoparticles have the potential to deliver and release multiple cargos in an externally stimulated and site-specific manner. Such assemblies are currently structurally simplistic, comprising spherical capsules or lipid clusters. Given that form and function are intertwined, this lack of architectural complexity restricts the development of more sophisticated properties. To address this, we have devised an engineering strategy combining microfluidics and conjugation chemistry to synthesize nanosized liposomes with two discrete compartments, one within another, which we term concentrisomes. We can control the composition of each bilayer and tune both particle size and the dimensions between inner and outer membranes. We can specify the identity of encapsulated cargo within each compartment, and the biophysical features of inner and outer bilayers, allowing us to imbue each bilayer with different stimuli-responsive properties. We use these particles for multi-stage release of two payloads at defined time points, and as attolitre reactors for triggered in situ biochemical synthesis.

Elucidating the Influence of Lipid Composition on Bilayer Perturbations Induced by the N-terminal Region of the Huntingtin Protein

Understanding the membrane interactions of the N-terminal 17 residues of the huntingtin protein (HttN) is essential for unraveling its role in cellular processes and its impact on huntingtin misfolding. In this study, we used atomic force microscopy (AFM) to examine the effects of lipid specificity in mediating bilayer perturbations induced by HttN. Across various lipid environments, the peptide consistently induced bilayer disruptions in the form of holes. Notably, our results unveiled that cholesterol enhanced bilayer perturbation induced by HttN, while phosphatidylethanolamine (PE) lipids suppressed hole formation. Furthermore, anionic phosphatidylglycerol (PG) and cardiolipin lipids, along with cholesterol at high concentrations, promoted the formation of double-bilayer patches. This unique structure suggests that the synergy among HttN, anionic lipids, and cholesterol can enhance bilayer fusion, potentially by facilitating lipid intermixing between adjacent bilayers. Additionally, our AFM-based force spectroscopy revealed that HttN enhanced the mechanical stability of lipid bilayers, as evidenced by an elevated bilayer puncture force. These findings illuminate the complex interplay between HttN and lipid membranes and provide useful insights into the role of lipid composition in modulating membrane interactions with the huntingtin protein.

Nanoscale Substrate Roughness Hinders Domain Formation in Supported Lipid Bilayers

Supported lipid bilayers are model membranes formed at solid substrate surfaces. This architecture renders the membrane experimentally accessible to surface-sensitive techniques used to study their properties, including atomic force microscopy, optical fluorescence microscopy, quartz crystal microbalance, and X-ray/neutron reflectometry, and allows integration with technology for potential biotechnological applications such as drug screening devices. The experimental technique often dictates substrate choice or treatment, and it is anecdotally recognized that certain substrates are suitable for a particular experiment, but the exact influence of the substrate has not been comprehensively investigated. Here, we study the behavior of a simple model bilayer, phase-separating on a variety of commonly used substrates, including glass, mica, silicon, and quartz, with drastically different results. The distinct micron-scale domains observed on mica, identical to those seen in free-floating giant unilamellar vesicles, are reduced to nanometer-scale domains on glass and quartz. The mechanism for the arrest of domain formation is investigated, and the most likely candidate is nanoscale surface roughness, acting as a drag on the hydrodynamic motion of small domains during phase separation. Evidence was found that the physicochemical properties of the surface have a mediating effect, most likely because of the changes in the lubricating interstitial water layer between the surface and bilayer.

Tunable cell-surface mimetics as engineered cell substrates

Most recent breakthroughs in understanding cell adhesion, cell migration, and cellular mechanosensitivity have been made possible by the development of engineered cell substrates of well-defined surface properties. Traditionally, these substrates mimic the extracellular matrix (ECM) environment by the use of ligand-functionalized polymeric gels of adjustable stiffness. However, such ECM mimetics are limited in their ability to replicate the rich dynamics found at cell-cell contacts. This review focuses on the application of cell surface mimetics, which are better suited for the analysis of cell adhesion, cell migration, and cellular mechanosensitivity across cell-cell interfaces. Functionalized supported lipid bilayer systems were first introduced as biomembrane-mimicking substrates to study processes of adhesion maturation during adhesion of functionalized vesicles (cell-free assay) and plated cells. However, while able to capture adhesion processes, the fluid lipid bilayer of such a relatively simple planar model membrane prevents adhering cells from transducing contractile forces to the underlying solid, making studies of cell migration and cellular mechanosensitivity largely impractical. Therefore, the main focus of this review is on polymer-tethered lipid bilayer architectures as biomembrane-mimicking cell substrate. Unlike supported lipid bilayers, these polymer-lipid composite materials enable the free assembly of linkers into linker clusters at cellular contacts without hindering cell spreading and migration and allow the controlled regulation of mechanical properties, enabling studies of cellular mechanosensitivity. The various polymer-tethered lipid bilayer architectures and their complementary properties as cell substrates are discussed.

Exploring Molecular-Biomembrane Interactions with Surface Plasmon Resonance and Dual Polarization Interferometry Technology: Expanding the Spotlight onto Biomembrane Structure

The molecular analysis of biomolecular-membrane interactions is central to understanding most cellular systems but has emerged as a complex technical challenge given the complexities of membrane structure and composition across all living cells. We present a review of the application of surface plasmon resonance and dual polarization interferometry-based biosensors to the study of biomembrane-based systems using both planar mono- or bilayers or liposomes. We first describe the optical principals and instrumentation of surface plasmon resonance, including both linear and extraordinary transmission modes and dual polarization interferometry. We then describe the wide range of model membrane systems that have been developed for deposition on the chips surfaces that include planar, polymer cushioned, tethered bilayers, and liposomes. This is followed by a description of the different chemical immobilization or physisorption techniques. The application of this broad range of engineered membrane surfaces to biomolecular-membrane interactions is then overviewed and how the information obtained using these techniques enhance our molecular understanding of membrane-mediated peptide and protein function. We first discuss experiments where SPR alone has been used to characterize membrane binding and describe how these studies yielded novel insight into the molecular events associated with membrane interactions and how they provided a significant impetus to more recent studies that focus on coincident membrane structure changes during binding of peptides and proteins. We then discuss the emerging limitations of not monitoring the effects on membrane structure and how SPR data can be combined with DPI to provide significant new information on how a membrane responds to the binding of peptides and proteins.

Nanostructured Lipid-based Films for Substrate Mediated Applications in Biotechnology

Amphiphilic in nature, lipids spontaneously self-assemble into a range of nanostructures in the presence of water. Among lipid self-assembled structures, liposomes and supported lipid bilayers have long held scientific interest for their main applications in drug delivery and plasma membrane models, respectively. In contrast, lipid-based multi-layered membranes on solid supports only recently begun drawing scientists' attention. New studies on lipid films show that the stacking of multiple bilayers on a solid support yields interestingly complex features to these systems. Namely, multiple layers exhibit cooperative structural and dynamic behavior. In addition, the materials enable compartmentalization, templating, and enhanced release of several molecules of interest. Importantly, supported lipid phases exhibit long-range periodic nano-scale order and orientation that is tunable in response to a changing environment. Herein, we summarize current and pertinent understanding of lipid-based film research focusing on how unique structural characteristics enable the emergence of new applications in biotechnology including label-free biosensors, macroscale drug delivery, and substrate-mediated gene delivery. Our very recent contributions to lipid-based films, focusing on the structural characterization at the meso, nano, and molecular-scale, using Small-Angle X-ray Scattering, Atomic Force Microscopy, Photothermal Induced Resonance, and Solid-State NMR will be also highlighted.

Supported lipid bilayer platforms to probe cell mechanobiology

Mammalian and bacterial cells sense and exert mechanical forces through the process of mechanotransduction, which interconverts biochemical and physical signals. This is especially important in contact-dependent signaling, where ligand-receptor binding occurs at cell-cell or cell-ECM junctions. By virtue of occurring within these specialized junctions, receptors engaged in contact-dependent signaling undergo oligomerization and coupling with the cytoskeleton as part of their signaling mechanisms. While our ability to measure and map biochemical signaling within cell junctions has advanced over the past decades, physical cues remain difficult to map in space and time. Recently, supported lipid bilayer (SLB) technologies have emerged as a flexible platform to mimic and perturb cell-cell and cell-ECM junctions, allowing one to study membrane receptor mechanotransduction. Changing the lipid composition and underlying substrate tunes bilayer fluidity, and lipid and ligand micro- and nano-patterning spatially control positioning and clustering of receptors. Patterning metal gridlines within SLBs confines lipid mobility and introduces mechanical resistance. Here we review fundamental SLB mechanics and how SLBs can be engineered as tunable cell substrates for mechanotransduction studies. Finally, we highlight the impact of this work in understanding the biophysical mechanisms of cell adhesion. This article is part of a Special Issue entitled: Interactions between membrane receptors in cellular membranes edited by Kalina Hristova.

Modulation of lipid membrane structural and mechanical properties by a peptidomimetic derived from reduced amide scaffold

Understanding how antimicrobial peptidomimetics interact with lipid membranes is important in battling multidrug resistant bacterial pathogens. We study the effects of a recently reported peptidomimetic on lipid bilayer structural and mechanical properties. The compound referred to as E107-3 is synthesized based on the acylated reduced amide scaffold and has been shown to exhibit good antimicrobial potency. Our vesicle leakage assay indicates that the compound increases lipid bilayer permeability. We use micropipette aspiration to explore the kinetic response of giant unilamellar vesicles (GUVs). Exposure to the compound causes the GUV protrusion length L_P to spontaneously increase and then decrease, followed by GUV rupture. Solution atomic force microscopy (AFM) is used to visualize lipid bilayer structural modulation within a nanoscopic regime. Unlike melittin, which produces pore-like structures, the peptidomimetic compound is found to induce nanoscopic heterogeneous structures. Finally, we use AFM-based force spectroscopy to study the impact of the compound on lipid bilayer mechanical properties. We find that incremental addition of the compound to planar lipid bilayers results in a moderate decrease of the bilayer puncture force F_P and a 39% decrease of the bilayer area compressibility modulus K_A. To explain our experimental data, we propose a membrane interaction model encompassing disruption of lipid chain packing and extraction of lipid molecules. The later action mode is supported by our observation of a double-bilayer structure in the presence of fusogenic calcium ions.

New poly(amino acid methacrylate) brush supports the formation of well-defined lipid membranes

A novel poly(amino acid methacrylate) brush comprising zwitterionic cysteine groups (PCysMA) was utilized as a support for lipid bilayers. The polymer brush provides a 12-nm-thick cushion between the underlying hard support and the aqueous phase. At neutral pH, the zeta potential of the PCysMA brush was ∼-10 mV. Cationic vesicles containing >25% DOTAP were found to form a homogeneous lipid bilayer, as determined by a combination of surface analytical techniques. The lipid mobility as measured by FRAP (fluorescence recovery after photobleaching) gave diffusion coefficients of ∼1.5 μm(2) s(-1), which are comparable to those observed for lipid bilayers on glass substrates.

New poly(amino acid methacrylate) brush supports the formation of well-defined lipid membranes

A novel poly(amino acid methacrylate) brush comprising zwitterionic cysteine groups (PCysMA) was utilized as a support for lipid bilayers. The polymer brush provides a 12-nm-thick cushion between the underlying hard support and the aqueous phase. At neutral pH, the zeta potential of the PCysMA brush was ∼-10 mV. Cationic vesicles containing >25% DOTAP were found to form a homogeneous lipid bilayer, as determined by a combination of surface analytical techniques. The lipid mobility as measured by FRAP (fluorescence recovery after photobleaching) gave diffusion coefficients of ∼1.5 μm(2) s(-1), which are comparable to those observed for lipid bilayers on glass substrates.

Polymer-tethered lipid multi-bilayers: a biomembrane-mimicking cell substrate to probe cellular mechano-sensing

Cells tiptoe through their environment forming highly localized and dynamic focal contacts. Experiments on polymeric gels of adjustable elasticity have shown that cells probe the viscoelasticity of their environment through an adaptive process of focal contact assembly/disassembly that critically affects cell adhesion, morphology, and motility. However, the specific mechanisms of this process have not yet been fully revealed. Here we report, for the first time, that fibroblast adhesion, morphology, and migration can also be controlled by altering the number of bilayers in a stack of multiple polymer-tethered lipid bilayers stabilized via maleimide-sulfhydral coupling chemistry. The observed changes in cell morphology, migration, and cytoskeletal organization in response to bilayer stacking correspond well with those previously observed on polymeric substrates of different polymer crosslinking density suggesting that variations in bilayer stacking are associated with changes in substrate viscoelasticity. This is in conceptual agreement with the existing knowledge about the structural, dynamic, and mechanical properties of polymer-lipid composite materials. Several distinct features, such as the lateral mobility of individual cell linkers and the immobilization of linker clusters, make the described substrates highly attractive tools for the study of dynamic, mechano-regulated cell linkages and cellular mechano-sensing.

Iterative layer-by-layer assembly of polymer-tethered multi-bilayers using maleimide–thiol coupling chemistry

The current study reports on the layer-by-layer assembly of a polymer-tethered lipid multi-bilayer stack using the iterative addition and roll out of giant unilamellar vesicles (GUVs) containing constituents with thiol and maleimide functional groups, respectively. Confocal microscopy and photobleaching experiments confirm stack integrity and stability over time, as well as the lateral fluidity of individual bilayers within the stacks. Complementary wide-field single molecule fluorescence microscopy and atomic force microscopy experiments show that increasing bilayer-substrate distances are associated with changes in lipid lateral mobility and bilayer morphology. Importantly, the described iterative approach can be employed to assemble multi-bilayer stacks with more than two bilayers, thus further reducing the influence of the underlying solid substrate on membrane behavior. Furthermore, the presence of lipopolymers within the multi-bilayer stacks results in fascinating membrane dynamics and organization properties, with interesting parallels to those found in plasma membranes. In that sense, the described multi-bilayer architecture represents an attractive model membrane platform for a variety of different biophysical studies.

DNA-based patterning of tethered membrane patches

Solid-supported lipid bilayers are useful model systems for mimicking cellular membranes; however, the interaction of the bilayer with the surface can disrupt the function of integral membrane proteins and impede topological transformations such as membrane fusion. As a result, a variety of tethered or cushioned lipid bilayer architectures have been described, which retain the proximity to the surface, enabling surface-sensitive techniques, but physically distance the bilayer from the surface. We have recently developed a method for spatially separating a lipid bilayer from a solid support using DNA lipids. In this system, a DNA strand is covalently attached to a glass slide or SiO2 wafer, and giant unilamellar vesicles (GUVs) displaying the complement rupture to form a planar lipid bilayer tethered above the surface. However, the location of the patch is random, determined by where the DNA-GUV initially binds to its complement. To allow greater versatility and control, we sought a way to pattern tethered membrane patches. We present a method for creating spatially distinct tethered membrane patches on a glass slide using microarray printing. Surface-reactive DNA sequences are spotted onto the slide, incubated to covalently link the DNA to the surface, and DNA-GUVs patches are formed selectively on the printed DNA. By interfacing the bilayers with microfluidic flow cells, materials can be added on top of or fused into the membrane to change the composition of the bilayers. With further development, this approach would enable rapid screening of different patches in protein binding assays and would enable interfacing patches with electrical detectors.

Lab on a Biomembrane: rapid prototyping and manipulation of 2D fluidic lipid bilayers circuits

Lipid bilayer membranes are among the most ubiquitous structures in the living world, with intricate structural features and a multitude of biological functions. It is attractive to recreate these structures in the laboratory, as this allows mimicking and studying the properties of biomembranes and their constituents, and to specifically exploit the intrinsic two-dimensional fluidity. Even though diverse strategies for membrane fabrication have been reported, the development of related applications and technologies has been hindered by the unavailability of both versatile and simple methods. Here we report a rapid prototyping technology for two-dimensional fluidic devices, based on in-situ generated circuits of phospholipid films. In this "lab on a molecularly thin membrane", various chemical and physical operations, such as writing, erasing, functionalization, and molecular transport, can be applied to user-defined regions of a membrane circuit. This concept is an enabling technology for research on molecular membranes and their technological use.

Substrate Effects on the Formation Process, Structure and Physicochemical Properties of Supported Lipid Bilayers

Supported lipid bilayers are artificial lipid bilayer membranes existing at the interface between solid substrates and aqueous solution. Surface structures and properties of the solid substrates affect the formation process, fluidity, two-dimensional structure and chemical activity of supported lipid bilayers, through the 1–2 nm thick water layer between the substrate and bilayer membrane. Even on SiO₂/Si and mica surfaces, which are flat and biologically inert, and most widely used as the substrates for the supported lipid bilayers, cause differences in the structure and properties of the supported membranes. In this review, I summarize several examples of the effects of substrate structures and properties on an atomic and nanometer scales on the solid-supported lipid bilayers, including our recent reports.