Advances in Electrochemical Ammonia Synthesis Beyond the Use of Nitrogen Gas as a Source

Phase-Regulated Active Hydrogen Behavior on Molybdenum Disulfide for Electrochemical Nitrate-to-Ammonia Conversion

Electrochemical reduction of nitrate waste is promising for environmental remediation and ammonia preparation. This process includes multiple hydrogenation steps, and thus the active hydrogen behavior on the surface of the catalyst is crucial. The crystal phase referred to the atomic arrangements in crystals has a great effect on active hydrogen, but the influence of the crystal phase on nitrate reduction is still unclear. Herein, enzyme-mimicking MoS2 in different crystal phases (1T and 2H) are used as models. The Faradaic efficiency of ammonia reaches ≈90 % over 1T-MoS2 , obviously outperforming that of 2H-MoS2 (27.31 %). In situ Raman spectra and theoretical calculations reveal that 1T-MoS2 produces more active hydrogen on edge S sites at a more positive potential and conducts an effortless pathway from nitrate to ammonia instead of multiple energetically demanding hydrogenation steps (such as *HNO to *HNOH) performed on 2H-MoS2 .

Carbon doped hexagonal boron nitride as an efficient metal-free catalyst for NO capture and reduction

The electrochemical NO reduction reaction (NORR) towards NH3 is considered a promising strategy to cope with both NO removal and NH3 production. Currently, the research on NORR electrocatalysts mainly focuses on metal-based catalysts, while metal-free catalysts are quite scarce. In this work, we have systematically investigated the properties of pristine and C/O doped h-BN for efficient NO capture and reduction. Our results reveal that the basal plane of pristine h-BN is inert to the adsorption of NO, while doping C or O can significantly enhance the NO capture abilities of h-BN. Then, we highlight that C-doped h-BN exhibits excellent NORR catalytic performance with a relatively low limiting potential of -0.28 V. Further analysis shows that the suitable adsorption strength of NO on the C-doped h-BN surface is the prime reason for its excellent NO reduction activity, which is shown to be due to appropriate electronic interactions between the active site and NO. Last but not least, the catalytic selectivity of h-BN towards the NORR is confirmed by inhibiting the competing hydrogen evolution reaction. Our findings not only provide deeper insight into the essential effect of element doping on the catalytic activities of h-BN, but also propose general design principles for high-performance metal-free NORR electrocatalysts.

Si3C Monolayer as an Efficient Metal-Free Catalyst for Nitrate Electrochemical Reduction: A Computational Study

Nitrate electroreduction reaction to ammonia (NO3ER) holds great promise for both nitrogen pollution removal and valuable ammonia synthesis, which are still dependent on transition-metal-based catalysts at present. However, metal-free catalysts with multiple advantages for such processes have been rarely reported. Herein, by means of density functional theory (DFT) computations, in which the Perdew-Burke-Ernzerhof (PBE) functional is obtained by considering the possible van der Waals (vdW) interaction using the DFT+D3 method, we explored the potential of several two-dimensional (2D) silicon carbide monolayers as metal-free NO3ER catalysts. Our results revealed that the excellent synergistic effect between the three Si active sites within the Si3C monolayer enables the sufficient activation of NO3- and promotes its further hydrogenation into NO2*, NO*, and NH3, making the Si3C monolayer exhibit high NO3ER activity with a low limiting potential of -0.43 V. In particular, such an electrochemical process is highly dependent on the pH value of the electrolytes, in which acidic conditions are more favorable for NO3ER. Moreover, ab initio molecular dynamics (AIMD) simulations demonstrated the high stability of the Si3C monolayer. In addition, the Si3C monolayer shows a low formation energy, excellent electronic properties, a superior suppression effect on competing reactions, and high stability, offering significant advantages for its experimental synthesis and practical applications in electrocatalysis. Thus, a Si3C monolayer can perform as a promising NO3ER catalyst, which would open a new avenue to further develop novel metal-free catalysts for NO3ER.

Single Selenium Atomic Vacancy Enabled Efficient Visible-Light-Response Photocatalytic NO Reduction to NH3 on Janus WSSe Monolayer

The NO reduction reaction (NORR) toward NH3 is simultaneously emerging for both detrimental NO elimination and valuable NH3 synthesis. An efficient NORR generally requires a high degree of activation of the NO gas molecule from the catalyst, which calls for a powerful chemisorption. In this work, by means of first-principles calculations, we discovered that the NO gas molecule over the Janus WSSe monolayer might undergo a physical-to-chemical adsorption transition when Se vacancy is introduced. If the Se vacancy is able to work as the optimum adsorption site, then the interface’s transferred electron amounts are considerably increased, resulting in a clear electronic orbital hybridization between the adsorbate and substrate, promising excellent activity and selectivity for NORR. Additionally, the NN bond coupling and *N diffusion of NO molecules can be effectively suppressed by the confined space of Se vacancy defects, which enables the active site to have the superior NORR selectivity in the NH3 synthesis. Moreover, the photocatalytic NO-to-NH3 reaction is able to occur spontaneously under the potentials solely supplied by the photo-generated electrons. Our findings uncover a promising approach to derive high-efficiency photocatalysts for NO-to-NH3 conversion.

Theoretical insights into dissociative-associative mechanism for enhanced electrochemical nitrate reduction to ammonia

The development of electrochemical nitrate reduction reaction (NO₃RR) is a "two birds-one stone" method, which can not only remove NO₃^- pollutant, but also produce valuable ammonia (NH₃). However, a mechanistic understanding of the nitrate reduction process remains very limited. Herein, we highlighted a dissociative-associative mechanism for the NO₃RR, in which the N-O bond of nitrate is initially broken to form *O and *NO₂ intermediate adsorbed on two active sites (dissociation process) and then subsequently hydrogenated and reduced to ammonia (association process). By taking a series of diatomic site catalysts (CuTM/g-CN and CuTM/N₆C, TM= Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn) as models, we systematically investigate the dissociative-associative mechanism for the NO₃RR and compared with the Cu-based single-atom catalysts which follows the traditional directly associative mechanism. Density functional theory (DFT) calculations show that dissociative-associative mechanism is energetically favorable on seven catalysts (CuTi/g-CN, CuV/g-CN, CuMn/g-CN, CuCo/g-CN, CuV/N₆C, CuCr/N₆C and CuFe/N₆C) with the significantly reduced limiting potential of - 0.14 V to - 0.47 V. Specifically, an efficiently screening strategy was proposed to determine the dissociative-associative or directly associative mechanism for NO₃RR. This work can provide useful guideline for the rational design and development of NO₃RR electrocatalysts.

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

The β-PdBi2 monolayer for efficient electrocatalytic NO reduction to NH3: a computational study

β-PdBi2 was proposed as a novel NORR catalyst for NH3 synthesis with high efficiency and high selectivity, and its catalytic activity can be enhanced by a tensile strain.

Predictive Theoretical Model for the Selective Electroreduction of Nitrate to Ammonia

The electrochemical reduction of nitrate (eNO₃RR) emerges as a promising route for decentralized ammonia synthesis. However, the competitive production of nitrite at low overpotentials is a challenging issue. Herein, using the combination of density functional theory and microkinetic modeling, we show that the selectivity for NH₃ surpasses that of NO₂^- at -0.66 V_RHE, which nicely reproduced the experimental value on titania. NH₂OH* → NH₂* is the kinetically controlling step at a low overpotential for NH₃ generation, while NO₂* → HNO₂ has the highest barrier to producing nitrite. Based on these mechanistic insights, we suggest that ΔG₁ (NH₂OH* → NH₂*) - ΔG₂ (NO₂* → HNO₂) can serve as a descriptor to predict the S(NO₂^-)/S(NH₃) crossover potential. Such a model is verified by the experimental results on Ag, Cu, TiO_2-x, Fe₃O₄, and Fe-MoS₂ and can be extended to the Au catalyst. Thus, this work sheds light on the rational design of catalysts that are simultaneously energy-efficient and selective to NH₃.

Heterostructured Bi2S3/MoS2 Nanoarrays for Efficient Electrocatalytic Nitrate Reduction to Ammonia Under Ambient Conditions

Developing efficient electrocatalysts to realize the nitrate reduction reaction (eNO₃^-RR) for ammonia synthesis as an alternative to the traditional Haber-Bosch production process is of great significance. Herein, the heterostructured Bi₂S₃/MoS₂ nanoarrays were successfully synthesized by Bi₂S₃ nanowires anchored on MoS₂ nanosheets. Owing to the interfacial coupling effect, both particular surface area and exposure active sites increase. Density functional theory further uncovered that the excellent activity originates from charge transfer of the interface and a low potential barrier of 0.58 eV for hydrogenation of *NO to *NOH on Bi₂S₃/MoS₂. Compared with pure Bi₂S₃ and MoS₂ catalysts, the heterostructured Bi₂S₃/MoS₂ nanoarrays exhibit a superior NH₃ yield of 15.04 × 10^-2 mmol·h^-1·cm^-2 and a Faraday efficiency of 88.4% at -0.8 V versus the reversible hydrogen electrode. This work provides a new avenue to explore advanced electrocatalysts, which is expected to shorten the distance from the practical application of the eNO₃^-RR technology.

A theoretical descriptor for screening efficient NO reduction electrocatalysts from transition-metal atoms on N-doped BP monolayer

An electrochemical nitric oxide (NO) reduction reaction (NORR) is proposed as an attractive method for simultaneous realization of NO removal and ammonia (NH₃) synthesis. Here, the potentials of 29 transition-metal atoms anchored on the nitrogen-doped BP monolayer (MN₃/BP) as efficient NORR catalysts are systematically examined using first-principles calculations. Combining the adsorption Gibbs free energies of the N and OH species, a simple descriptor is constructed and a volcano plot of the NORR limiting potentials on the single atom catalysts (SACs) is established. Consequently, the MoN₃/BP and IrN₃/BP SACs are picked out as promising NORR electrocatalysts for NH₃ synthesis with the limiting potentials of -0.10 V and -0.06 V, respectively. Their corresponding rate constants are significantly larger than or close to that of the excellent Pt(111) surface. The electronic analysis shows that the Mo-4d or Ir-5d orbitals can be well hybridized with the NO-2p orbitals, sufficiently activating the adsorbed NO species. Particularly, the MoN₃/BP and IrN₃/BP SACs possess high thermal stabilities and can be easily synthesized by using MoCl₃ and IrCl₃ as precursors, respectively. This work not only offers a simple descriptor to efficiently design NORR electrocatalysts but also provides a comprehensive atomic understanding on the mechanism of NO-to-NH₃ conversion.

Amorphous Boron Carbide on Titanium Dioxide Nanobelt Arrays for High-Efficiency Electrocatalytic NO Reduction to NH3

Electrocatalytic NO reduction is regarded as an attractive strategy to degrade the NO contaminant into useful NH₃ , but the lack of efficient and stable electrocatalysts to facilitate such multiple proton-coupled electron-transfer processes impedes its applications. Here, we report on developing amorphous B_2.6 C supported on a TiO₂ nanoarray on a Ti plate (a-B_2.6 C@TiO₂ /Ti) as an NH₃ -producing nanocatalyst with appreciable activity and durability toward the NO electroreduction. It shows a yield of 3678.6 μg h^-1  cm^-2 and a FE of 87.6 %, superior to TiO₂ /Ti (563.5 μg h^-1  cm^-2 , 42.6 %) and a-B_2.6 C/Ti (2499.2 μg h^-1  cm^-2 , 85.6 %). An a-B_2.6 C@TiO₂ /Ti-based Zn-NO battery achieves a power density of 1.7 mW cm^-2 with an NH₃ yield of 1125 μg h^-1  cm^-2 . An in-depth understanding of catalytic mechanisms is gained by theoretical calculations.

Efficient nitric oxide electroreduction toward ambient ammonia synthesis catalyzed by a CoP nanoarray

The ever-increasing anthropic NO emission from fossil fuel combustion has resulted in a series of severe environmental issues. Ambient electrocatalytic NO reduction has emerged as a promising route for sustainable...