Determining Functional Aptamer-Protein Interaction by Biolayer Interferometry

Generating robust aptamers for food analysis by sequence-based configuration optimization

Advanced analytical techniques are emerging in the food industry. Aptamer-based biosensors achieve rapid and highly selective analysis, thus drawing particular attention. Aptamers are oligonucleotide probes screened via in vitro Systematic Evolution of Ligands by EXponential Enrichment (SELEX), which can bind with their specific targets by folding into three-dimensional configurations and accept various modifications to be incorporated into biosensors, showing great potential in food analysis. Unfortunately, aptamers obtained by SELEX may not possess satisfactory affinity. Post-SELEX strategies were proposed to optimize aptamers' configuration and enhance the binding affinity, with specificity confirmed. Sequence-based optimization strategies exhibit great advantages in simple operation, good generalization, low cost, etc. This review summarizes the latest study (2015-2023) on generating robust aptamers for food targets by sequence-based configuration optimization, as well as the generated aptamers and aptasensors, with an expectation to provide inspirations for developing aptamer and aptasensors with high performance for food analysis and to safeguard food quality and safety.

Study on therapeutic mechanism of total salvianolic acids against myocardial ischemia-reperfusion injury based on network pharmacology, molecular docking, and experimental study

ETHNOPHARMACOLOGICAL RELEVANCE

Radix Salviae miltiorrhizae, also known as Danshen in Chinese, effectively activates the blood and resolves stasis. Total salvianolic acids (SA) is the main active ingredient of Danshen, and related preparations, such as salvianolate injection are commonly used clinically to treat myocardial ischemia-reperfusion injury (MIRI). However, the potential targets and key active ingredients of SA have not been sufficiently investigated.

AIM OF THE STUDY

This study aimed to investigate the mechanism of action of SA in treating MIRI.

MATERIALS AND METHODS

Network pharmacology and molecular docking techniques were used to predict SA targets against MIRI. The key acting pathway of SA were validated by performing experiments in a rat MIRI model.

RESULTS

Twenty potential ingredients and 54 targets of SA in treating MIRI were identified. Ingredient-target-pathway network analysis revealed that salvianolic acid B and rosmarinic acid had the highest degree value. Pathway enrichment analysis showed that SA may regulate MIRI through the IL-17 signaling pathway, and this result was confirmed in the rat MIRI experiment.

CONCLUSION

The results of this study indicate that SA may protect MIRI by regulating the IL-17 pathway.

Increasing the functional density of threose nucleic acid

Chemical strategies that augment genetic polymers with amino acid residues that are overrepresented on the paratope surface of an antibody offer a promising route for enhancing the binding properties of nucleic acid aptamers. Here, we describe the chemical synthesis of α-l-threofuranosyl cytidine nucleoside triphosphate (tCTP) carrying either a benzyl or phenylpropyl side chain at the pyrimidine C-5 position. Polymerase recognition studies indicate that both substrates are readily incorporated into a full-length α-l-threofuranosyl nucleic acid (TNA) product by extension of a DNA primer-template duplex with an engineered TNA polymerase. Similar primer extension reactions performed using nucleoside triphosphate mixtures containing both C-5 modified tCTP and C-5 modified tUTP substrates enable the production of doubly modified TNA strands for a panel of 20 chemotype combinations. Kinetic measurements reveal faster on-rates (kon) and tighter binding affinity constants (Kd) for engineered versions of TNA aptamers carrying chemotypes at both pyrimidine positions as compared to their singly modified counterparts. These findings expand the chemical space of evolvable non-natural genetic polymers by offering a path for improving the quality of biologically stable TNA aptamers for future clinical applications.

Modified nucleic acid aptamers: development, characterization, and biological applications

Aptamers are single-stranded oligonucleotides that bind to their targets via specific structural interactions. To improve the properties and performance of aptamers, modified nucleotides are incorporated during or after a selection process such as systematic evolution of ligands by exponential enrichment (SELEX). We summarize the latest modified nucleotides and strategies used in modified (mod)-SELEX and post-SELEX to develop modified aptamers, highlight the methods used to characterize aptamer-target interactions, and present recent progress in modified aptamers that recognize different targets. We discuss the challenges and perspectives in further advancing the methodologies and toolsets to accelerate the discovery of modified aptamers, improve the throughput of aptamer-target characterization, and expand the functional diversity and complexity of modified aptamers.

A high-throughput pipeline for design and selection of peptides targeting the SARS-Cov-2 Spike protein

Rapid design, screening, and characterization of biorecognition elements (BREs) is essential for the development of diagnostic tests and antiviral therapeutics needed to combat the spread of viruses such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). To address this need, we developed a high-throughput pipeline combining in silico design of a peptide library specific for SARS-CoV-2 spike (S) protein and microarray screening to identify binding sequences. Our optimized microarray platform allowed the simultaneous screening of ~ 2.5 k peptides and rapid identification of binding sequences resulting in selection of four peptides with nanomolar affinity to the SARS-CoV-2 S protein. Finally, we demonstrated the successful integration of one of the top peptides into an electrochemical sensor with a clinically relevant limit of detection for S protein in spiked saliva. Our results demonstrate the utility of this novel pipeline for the selection of peptide BREs in response to the SARS-CoV-2 pandemic, and the broader application of such a platform in response to future viral threats.

In vitro biolayer interferometry analysis of acetylcholinesterase as a potential target of aryl-organophosphorus flame-retardants

Organophosphorus flame retardants (OPFRs) have been implicated as neurotoxicants, but their potential neurotoxicity and mechanisms remain poorly understood. Herein, we investigated the neurotoxicity of selected OPFRs using zebrafish as a model organism. Environmentally relevant concentrations (3-1500 nM) of three classes of OPFRs (aryl-OPFRs, chlorinated-OPFRs, and alkyl-OPFRs) were tested in zebrafish larvae (2-144 h post-fertilisation) alongside the neurotoxic chemical chlorpyrifos (CPF) that inhibits acetylcholinesterase (AChE). Exposure to aryl-OPFRs and CPF inhibited AChE activities, while chlorinated- and alkyl-OPFRs did not inhibit these enzymes. Biolayer interferometry (BLI) was used to probe interactions between OPFRs and AChE. The association and dissociation response curves showed that, like CPF, all three selected aryl-OPFRs, triphenyl phosphate (TPHP), tricresyl phosphate (TCP) and cresyl diphenyl phosphate (CDP), bound directly to AChE. The affinity constant (K_D) for TPHP, TCP, CDP and CPF was 2.18 × 10^-4, 5.47 × 10^-5, 1.05 × 10^-4 and 1.70 × 10^-5 M, respectively. In addition, molecular docking revealed that TPHP, TCP, CDP and CPF bound to AChE with glide scores of - 7.8, - 8.3, - 8.1 and - 7.3, respectively. Furthermore, the calculated binding affinity between OPFRs and AChE correlated well with the K_D values measured by BLI. The present study revealed that aryl-OPFRs can act as potent AChE inhibitors, and may therefore present a significant ecological risk to aquatic organisms.

How to Develop and Prove High-Efficiency Selection of Ligands from Oligonucleotide Libraries: A Universal Framework for Aptamers and DNA-Encoded Small-Molecule Ligands

Screening molecular libraries for ligands capable of binding proteins is widely used for hit identification in the early drug discovery process. Oligonucleotide libraries provide a very high diversity of compounds, while the combination of the polymerase chain reaction and DNA sequencing allow the identification of ligands in low copy numbers selected from such libraries. Ligand selection from oligonucleotide libraries requires mixing the library with the target followed by the physical separation of the ligand-target complexes from the unbound library. Cumulatively, the low abundance of ligands in the library and the low efficiency of available separation methods necessitate multiple consecutive rounds of partitioning. Multiple rounds of inefficient partitioning make the selection process ineffective and prone to failures. There are continuing efforts to develop a separation method capable of reliably generating a pure pool of ligands in a single round of partitioning; however, none of the proposed methods for single-round selection have been universally adopted. Our analysis revealed that the developers' efforts are disconnected from each other and hindered by the lack of quantitative criteria of selection quality assessment. Here, we present a formalism that describes single-round selection mathematically and provides parameters for quantitative characterization of selection quality. We use this formalism to define a universal strategy for development and validation of single-round selection methods. Finally, we analyze the existing partitioning methods, the published single-round selection reports, and some pertinent practical considerations through the prism of this formalism. This formalism is not an experimental protocol but a framework for correct development of experimental protocols. While single-round selection is not a goal by itself and may not always suffice selection of good-quality ligands, our work will help developers of highly efficient selection approaches to consolidate their efforts under an umbrella of universal quantitative criteria of method development and assessment.

The Functional Role of Loops and Flanking Sequences of G-Quadruplex Aptamer to the Hemagglutinin of Influenza a Virus

Nucleic acid aptamers are generally accepted as promising elements for the specific and high-affinity binding of various biomolecules. It has been shown for a number of aptamers that the complexes with several related proteins may possess a similar affinity. An outstanding example is the G-quadruplex DNA aptamer RHA0385, which binds to the hemagglutinins of various influenza A virus strains. These hemagglutinins have homologous tertiary structures but moderate-to-low amino acid sequence identities. Here, the experiment was inverted, targeting the same protein using a set of related, parallel G-quadruplexes. The 5'- and 3'-flanking sequences of RHA0385 were truncated to yield parallel G-quadruplex with three propeller loops that were 7, 1, and 1 nucleotides in length. Next, a set of minimal, parallel G-quadruplexes with three single-nucleotide loops was tested. These G-quadruplexes were characterized both structurally and functionally. All parallel G-quadruplexes had affinities for both recombinant hemagglutinin and influenza virions. In summary, the parallel G-quadruplex represents a minimal core structure with functional activity that binds influenza A hemagglutinin. The flanking sequences and loops represent additional features that can be used to modulate the affinity. Thus, the RHA0385-hemagglutinin complex serves as an excellent example of the hypothesis of a core structure that is decorated with additional recognizing elements capable of improving the binding properties of the aptamer.

X-aptamers targeting Thy-1 membrane glycoprotein in pancreatic ductal adenocarcinoma

Modified DNA aptamers incorporated with amino-acid like side chains or drug-like ligands can offer unique advantages and enhance specificity as affinity ligands. Thy-1 membrane glycoprotein (THY1 or CD90) was previously identified as a biomarker candidate of neovasculature in pancreatic ductal adenocarcinoma (PDAC). The current study developed and evaluated modified DNA X-aptamers targeting THY1 in PDAC. The expression and glycosylation of THY1 in PDAC tumor tissues were assessed using immunohistochemistry and quantitative proteomics. Bead-based X-aptamer library that contains 108 different sequences was used to screen for high affinity THY1 X-aptamers. The sequences of the X-aptamers were analyzed with the next-generation sequencing. The affinities of the selected X-aptamers to THY1 were quantitatively evaluated with flow cytometry. Three high affinity THY1 X-aptamers, including XA-B217, XA-B216 and XA-A9, were selected after library screening and affinity binding evaluation. These three X-aptamers demonstrated a high binding affinity and specificity to THY1 protein and the THY1 expressing cell lines, using THY1 antibody as a comparison. The development of these X-aptamers provides highly specific and non-immunogenic affinity ligands for THY1 binding in the context of biomarker development and clinical applications. They could be further exploited to assist molecular imaging of PDAC targeting THY1.

Selection of High-Affinity RNA Aptamers That Distinguish between Doxycycline and Tetracycline

Oligonucleotide aptamers are found in prokaryotes and eukaryotes, and they can be selected from large synthetic libraries to bind protein or small-molecule ligands with high affinities and specificities. Aptamers can function as biosensors, as protein recognition elements, and as components of riboswitches allowing ligand-dependent control of gene expression. One of the best studied laboratory-selected aptamers binds the antibiotic tetracycline, but it binds with a much lower affinity to the closely related but more bioavailable antibiotic doxycycline. Here we report enrichment of doxycycline binding aptamers from a selectively randomized library of tetracycline aptamer variants over four selection rounds. Selected aptamers distinguish between doxycycline, which they bind with dissociation constants of approximately 7 nM, and tetracycline, which they bind undetectably. They thus function as orthogonal complements to the original tetracycline aptamer. Unexpectedly, doxycycline aptamers adopt a conformation distinct from that of the tetracycline aptamer and depend on constant regions originally installed as primer binding sites. We show that the fluorescence emission intensity of doxycycline increases upon aptamer binding, permitting their use as biosensors. This new class of aptamers can be used in multiple contexts where doxycycline detection, or doxycycline-mediated regulation, is necessary.

Biophysical Characterization of Aptamer-Target Interactions

Aptamers are single-stranded nucleic acid molecules forming well-defined 3D structures. Aptamers typically bind to their ligands with high affinity and specificity. They are capable of interacting with various kinds of ligands: ions, small molecules, peptides, proteins, viruses, bacteria, and even cells. Therefore, aptamers are in widespread use as sensor molecules or as targeting agents in diagnostics and pharmaceutics. As a prerequisite for their use in these economic high-value areas, aptamers must be studied in detail with respect to different biophysical characteristics. Of central importance are basic binding parameters of the aptamer-target interaction, such as binding affinity and kinetics. Numerous biophysical methods with different features, characteristics, and capabilities are used in the field today for this purpose.This chapter provides an overview of the current state-of-the-art technologies for studying interactions between aptamers and targets and discusses their advantages as well as drawbacks. Furthermore, essential aspects influencing any aptamer characterization strategy will be presented. Finally, issues of comparability of binding data between different aptamer characterization technologies will be discussed. Graphical Abstract.

Inkjet Printed Nanopatterned Aptamer-Based Sensors for Improved Optical Detection of Foodborne Pathogens

The increasing incidence of infectious outbreaks from contaminated food and water supply continues imposing a global burden for food safety, creating a market demand for on-site, disposable, easy-to-use, and cost-efficient devices. Despite of the rapid growth of biosensors field and the generation of breakthrough technologies, more than 80% of the platforms developed at lab-scale never will get to meet the market. This work aims to provide a cost-efficient, reliable, and repeatable approach for the detection of foodborne pathogens in real samples. For the first time an optimized inkjet printing platform is proposed taking advantage of a carefully controlled nanopatterning of novel carboxyl-functionalized aptameric ink on a nitrocellulose substrate for the highly efficient detection of E. coli O157:H7 (25 colony forming units (CFU) mL^-1 in pure culture and 233 CFU mL^-1 in ground beef) demonstrating the ability to control the variation within ±1 SD for at least 75% of the data collected even at very low concentrations. From the best of the knowledge this work reports the lowest limit of detection of the state of the art for paper-based optical detection of E. coli O157:H7, with enough evidence (p > 0.05) to prove its high specificity at genus, species, strain, and serotype level.

In silicopost-SELEX screening and experimental characterizations for acquisition of high affinity DNA aptamers against carcinoembryonic antigen

High affinity DNA aptamers against carcinoembryonic antigen were selected and verified by using anin silicoapproach and experimental characterizations.

Label-Free Electrophoretic Mobility Shift Assay (EMSA) for Measuring Dissociation Constants of Protein-RNA Complexes

The electrophoretic mobility shift assay (EMSA) is a well-established method to detect formation of complexes between proteins and nucleic acids and to determine, among other parameters, equilibrium constants for the interaction. Mixtures of protein and nucleic acid solutions of various ratios are analyzed via polyacrylamide gel electrophoresis (PAGE) under native conditions. In general, protein-nucleic acid complexes will migrate more slowly than the free nucleic acid. From the distributions of the nucleic acid components in the observed bands in individual gel lanes, quantitative parameters such as the dissociation constant (K_d ) of the interaction can be measured. This article describes a simple and rapid EMSA that relies either on precast commercial or handcast polyacrylamide gels and uses unlabeled protein and nucleic acid. Nucleic acids are instead detected with SYBR Gold stain and band intensities established with a standard gel imaging system. We used this protocol specifically to determine K_d values for complexes between the PAZ domain of Argonaute 2 (Ago2) enzyme and native and chemically modified RNA oligonucleotides. EMSA-based equilibrium constants are compared to those determined with isothermal titration calorimetry (ITC). Advantages and limitations of this simple EMSA are discussed by comparing it to other techniques used for determination of equilibrium constants of protein-RNA interactions, and a troubleshooting guide is provided. © 2018 by John Wiley & Sons, Inc.

Crystal structures of thrombin in complex with chemically modified thrombin DNA aptamers reveal the origins of enhanced affinity

Thrombin-binding aptamer (TBA) is a DNA 15-mer of sequence 5'-GGT TGG TGT GGT TGG-3' that folds into a G-quadruplex structure linked by two T-T loops located on one side and a T-G-T loop on the other. These loops are critical for post-SELEX modification to improve TBA target affinity. With this goal in mind we synthesized a T analog, 5-(indolyl-3-acetyl-3-amino-1-propenyl)-2'-deoxyuridine (W) to substitute one T or a pair of Ts. Subsequently, the affinity for each analog was determined by biolayer interferometry. An aptamer with W at position 4 exhibited about 3-fold increased binding affinity, and replacing both T4 and T12 with W afforded an almost 10-fold enhancement compared to native TBA. To better understand the role of the substituent's aromatic moiety, an aptamer with 5-(methyl-3-acetyl-3-amino-1-propenyl)-2'-deoxyuridine (K; W without the indole moiety) in place of T4 was also synthesized. This K4 aptamer was found to improve affinity 7-fold relative to native TBA. Crystal structures of aptamers with T4 replaced by either W or K bound to thrombin provide insight into the origins of the increased affinities. Our work demonstrates that facile chemical modification of a simple DNA aptamer can be used to significantly improve its binding affinity for a well-established pharmacological target protein.

Aptamer selection and application in multivalent binding-based electrical impedance detection of inactivated H1N1 virus

The type A influenza viruses are the most virulent and variable human pathogens with epidemic or even pandemic threat. The development of sensitive, specific and safe field testing methods is in particular need and quite challenging. We report here the selection and practical utilization of the inactivated influenza virus-specific aptamers. The DNA aptamers against inactivated intact H1N1 virus particles were identified through the systematic evolution of ligands by exponential enrichment (SELEX) procedure. The discriminative aptamers and their truncated sequences showed selectively high affinity to inactive H1N1 virus and H3N2 virus with the K_d in the low nanomolar range and collective binding properties. The truncated sequences were first applied in a sandwich enzyme-linked oligonucleotide assay (ELONA) with a H1N1 detection limit (LOD, S/N = 3) of 0.3 ng/μL and then in an electrochemical impedance (EIS) aptasensor with more than 300 times improved LOD (0.9 pg/μL) and the excellent selectivity over other viruses (> 100 times). Therefore the developed aptasensors represent the safer, simpler, and possibly better virus-variation adaptable means of virus diagnostics.

Real-time detection of the interaction between alpha-fetoprotein and its ssDNA aptamer by dual polarization interferometry

A real-time and label-free strategy to understand the interaction between biomarkers and ssDNA aptamers.

Origins of the enhanced affinity of RNA-protein interactions triggered by RNA phosphorodithioate backbone modification

The well-characterized interaction between the MS2 coat protein and its cognate RNA hairpin was used to evaluate changes in affinity as a result of phosphorodithioate (PS2) replacing phosphate by biolayer interferometry (BLI). A structure-based analysis of the data provides insights into the origins of the enhanced affinity of RNA-protein interactions triggered by the PS2 moiety.

Selection of PD1/PD-L1 X-Aptamers

Specific, chemically modified aptamers (X-Aptamers) were identified against two immune checkpoint proteins, recombinant Programmed Death 1 (PD-1) and Programmed Death Ligand 1 (PD-L1). Selections were performed using a bead-based X-Aptamer (XA) library containing several different amino acid functional groups attached to dU at the 5-position. The binding affinities and specificities of the selected XA-PD1 and XA-PDL1 were validated by hPD-1 and hPD-L1 expression cells, as well as by binding to human pancreatic ductal adenocarcinoma tissue. The selected PD1 and PDL1 XAs can mimic antibody functions in in vitro assays.