Structure and catalysis of cellulose-derived amorphous carbon bearing SO3H groups

Ni/PiNe Heterogeneous Catalyst from Biomass Waste: Low-Loading, Ligand-Free Suzuki-Miyaura Cross-Coupling

An efficient Ni-based heterogeneous catalyst from pine needles urban waste valorization was designed and developed with a resource recycling strategy. The Ni/PiNe catalyst was fully characterized and tested in the Suzuki-Miyaura coupling under microwave irradiation. Although Ni is a promising candidate for replacing Pd-based catalytic systems, it generally requires a high catalyst amount and the exploitation of ligands and additives to enhance the reaction rate. On the contrary, with our new Ni/PiNe, 30 different products were efficiently synthesized with an isolated yield of up to 93 %, using a very low catalyst amount and in the absence of ligands. Furthermore, the Ni/PiNe catalyst also showed good durability for consecutive cycles and an impressive TON value (1140). In addition to the catalytic efficiency in short reaction time and to the stability and durability under MW irradiation, the Ni/PiNe allowed for further optimization, achieving a low E-factor value (14.0), thus highlighting the potential in further reducing the waste and costs associated to the process.

Spectroscopic Signatures of Ultra-Thin Amorphous Carbon with the Tuned Disorder Directly Grown on a Dielectric Substrate

The reduced structural complexity of atomically thin amorphous carbons makes it suitable for semiconductor technology. Inherent challenges arise from transfer processes subsequent to growth on metallic substrates, posing significant challenges to the accurate characterization of amorphous materials, thereby compromising the reliability of spectroscopic analysis. Here this work presents a novel approach: direct growth of ultra-thin amorphous carbon with tuned disorder on a dielectric substrate (SiO2/Si) using photochemical reaction and thermal annealing process with a solid precursor. This work characterizes the amorphous carbon films' disorder using spectroscopic techniques, such as X-ray photoelectron spectroscopy, Electron energy loss spectroscopy, and Raman spectroscopy, which offer greater convenience compared to microscopy-based studies. This method, rooted in comprehensive spectroscopic characterization, elucidates characteristic signatures inherent to the amorphous carbon films. These findings reveal that Raman spectroscopy is particularly effective in identifying the amorphous phase of atomically-thin carbon. Additionally, I-V characterization and high-frequency dielectric measurements showcase the potential application of directly grown amorphous carbon films in the semiconductor industry, where nanometer-level thin conductors and dielectrics are commonly utilized. This transfer-free characterization method provides a useful tool to find the correlation between atomic structure and electrical/optical properties, giving valuable insights into comprehensive crystallographic fundamental research.

Folic acid functionalized gadolinium-doped carbon dots as fluorescence / magnetic resonance imaging contrast agent for targeted imaging of liver cancer

Gadolinium-doped carbon dots (Gd-CDs), as a new class of nanomaterial, has a wide application prospect in targeted imaging and monitoring diagnosis and treatment of liver cancer because of their good fluorescence (FL)-magnetic resonance (MR) imaging properties. First, Gd-CDs were synthesized by hydrothermal method with gadodiamide as gadolinium source, citric acid as carbon source and silane coupling agent (KH-792) as coupling agent with FL quantum yield (QY) of 48.2%. Then, folic acid (FA), which is highly expressed in liver cancer, was used as a targeting component to modify Gd-CDs to obtain targeted imaging agent (Gd-CDs-FA). The results showed that Gd-CDs and Gd-CDs-FA have low cytotoxicity and good biocompatibility, and the targeting and selectivity of Gd-CDs-FA to HepG2 cells could be observed under confocal laser scanning microscope (CLSM). The T1 longitudinal relaxation rates (r1) of Gd-CDs and Gd-CDs-FA are 15.92 mM-1s-1 and 13.56 mM-1s-1, respectively. They showed good MR imaging ability in vitro and in vivo, and MR imaging in nude mice further proved the targeting imaging performance of Gd-CDs-FA. Therefore, Gd-CDs-FA with higher QY showed good FL-MR targeting imaging ability of liver cancer, which broke through the limitations of single molecular imaging probe in sensitivity and soft tissue resolution. This study provides a new idea for the application of Gd-CDs in FL and MR targeting imaging of liver cancer.

Preparation of polysubstituted imidazoles using AC-SO3H/[Urea]7[ZnCl2]2 as an efficient catalyst system: a novel method, and α-glucosidase inhibitor activity

Deep eutectic solvents (DESs) act as both an organic solvent and a useful catalyst for organic synthesis reactions, especially the synthesis of heterocyclic compounds containing the element nitrogen. DESs exhibit many important properties namely large liquid fields, biodegradability, outstanding thermal stability, and moderate vapor pressure. Amorphous carbon-bearing sulfonic acid groups (AC-SO3H) are one of the new-generation solid acids showing strong acid activity. Based on the simultaneous presence of acidic functional groups such as carboxylic acid, phenolic, and sulfonic acid groups, they exhibit many important activities namely strong Brønsted acid, high surface area, high stability, reusability, and recyclability. In this study, AC-SO3H was made from rice husk via the carbonization and sulfonation processes, and the surface properties and structure were examined using contemporary methods such as FT-IR, P-XRD, TGA, SEM, and EDS. And, [Urea]7[ZnCl2]2 was synthesized from urea and ZnCl2 with a mole ratio of 7 : 2; the structure is defined using FT-IR and TGA. By combining AC-SO3H and [Urea]7[ZnCl2]2 we aim to form an effective catalyst/solvent system for the preparation of polysubstituted imidazole derivatives through the multi-component cyclization reaction from nitrobenzenes, benzil, aldehydes, and ammonium acetate. The major products are obtained with high isolation yields above 60%. To assess the catalyst system's activity, the recovery and reusability of the AC-SO3H/[Urea]7[ZnCl2]2 system were examined with hardly any performance modification. In an effort to create potential enzyme α-glucosidase inhibitors, several novel polysubstituted imidazoles were created. Five of these compounds showed good enzyme α-glucosidase inhibitor activity. The most effective substances were IMI-13, IMI-15, and IMI-20, with IC50 values that were greater than the acarbose at 16.5, 15.8, and 11.6 μM, respectively - the acarbose (IC50, 214.5 μM) as the positive control.

Biomass-Derived Carbon Materials: Controllable Preparation and Versatile Applications

Biomass-derived carbon materials (BCMs) are encountering the most flourishing moment because of their versatile properties and wide potential applications. Numerous BCMs, including 0D carbon spheres and dots, 1D carbon fibers and tubes, 2D carbon sheets, 3D carbon aerogel, and hierarchical carbon materials have been prepared. At the same time, their structure-property relationship and applications have been widely studied. This paper aims to present a review on the recent advances in the controllable preparation and potential applications of BCMs, providing a reference for future work. First, the chemical compositions of typical biomass and their thermal degradation mechanisms are presented. Then, the typical preparation methods of BCMs are summarized and the relevant structural management rules are discussed. Besides, the strategies for improving the structural diversity of BCMs are also presented and discussed. Furthermore, the applications of BCMs in energy, sensing, environment, and other areas are reviewed. Finally, the remaining challenges and opportunities in the field of BCMs are discussed.

Liquefaction of starch using solid-acid catalysts derived from spent coffee for the production of plasticized poly (vinyl alcohol) films

This paper reports a strategy for preparing polyether polyols from corn starch, with (i) a mixture of polyethylene glycol 400 and glycerin (7:3, w/w) as the liquefying solvent and (ii) a spent-coffee-derived solid-acid catalyst (SC-SAC) (1:10, w/w, SC-SAC/starch) at 433 K for 1.5 h, under which conditions the liquefaction yield exceeded 99 %. The SC-SAC was prepared via hydrothermal carbonization at 453 K for 12 h, followed by sulfonation with H₂SO₄ at 343 K for 10 h. The liquefied starch product (SLP) was then used to plasticize poly(vinyl alcohol) (PVA) films with various mixing ratios. The optimal 0.4 SLP/PVA blend film exhibited good mechanical properties (tensile strength 38.07 MPa, elongation at break 1199 %), good transparency, and excellent flexibility. The results highlight the possibility of using SLP/PVA films in the development of degradable packaging materials.

Synthesis of lignin-carbohydrate complex-based catalyst from Eragrostis tef straw and its catalytic performance in xylose dehydration to furfural

A new catalyst was successfully prepared by functionalization of the lignin-carbohydrate complex structure in the Eragrostis tef straw via simultaneous carbonization and sulfonation. The physical and chemical properties of the surface of the synthesized catalyst were checked by FTIR and XRD. The FTIR results indicate the prepared catalyst exhibited functional groups such as -SO₃H, -COOH, and -OH. The synthesis conditions like the temperature and time of carbonization and sulfonation showed significant effect the amount of the strong acid doped into the carbonized lignin-carbohydrate matrix. The newly prepared catalyst was checked for dehydration of xylose to furfural and revealed of course that it has the potential. The maximum yield of furfural 62.4% was achieved and the catalyst showed excellent reusability for 5 runs without significant loss of catalystic activity. The use of catalysts prepared from Eragrostis tef straw is a green strategy for converting xylose to furfural, as these catalysts are solving the problems associated with the use of mineral acid catalysts.

Hydrolysis of Oligosaccharides and Polysaccharides on Sulfonated Solid Acid Catalysts: Relations between Adsorption Properties and Catalytic Activities

Sulfonated solid acid materials, such as sulfonated carbon catalysts, are promising materials as heterogeneous catalysts for the hydrolysis of esters and polysaccharides in water solvents. The catalytic active site is a sulfonic acid functional group. Compared to conventional strong acidic ion-exchange resin catalysts, sulfonated carbon materials have less sulfonic acid functional groups but higher catalytic activity for hydrolysis of polysaccharides per catalyst weight. However, the details of catalytic properties and the substrate suitability of both catalysts are unclear. In this study, the hydrolytic activities and the adsorption properties of both catalysts were investigated for various oligosaccharides and polysaccharides with varying degrees of polymerization (DP). The catalytic activities for the hydrolysis with increase of the DP of saccharides were found to increase over the sulfonated carbon catalyst but decrease over strong acidic ion-exchange resin catalyst. The inverse catalytic properties attribute to the dependence of the amounts of adsorption and/or penetration of saccharides on the DP. Moreover, the catalytic activity per acidic sites of strong acidic ion-exchange resin is in good agreement with the value obtained by multiplying the catalytic activity of a dilute sulfuric acid by the penetration degrees.

Prevention of Hepatic Ischemia-Reperfusion Injury by Carbohydrate-Derived Nanoantioxidants

Hepatic ischemia-reperfusion injury (IRI), which mainly results from excessive reactive oxygen species (ROS) generated by a reperfusion burst of oxygen, has long been a major cause of liver dysfunction and failure after surgical procedures. Here, a monodispersed hydrophilic carbohydrate-derived nanoparticle (C-NP) was synthesized as a nanoantioxidant that could effectively prevent hepatic IRI. The spherical C-NPs had a size of ∼78 ± 11.3 nm covered with polar surface groups. They were well dispersible in water with good colloidal stability, nontoxicity, and good ROS scavenging capability. The C-NPs also exhibited good circulation lifetime, effective delivery to liver, and gradual degradability with an ability to assist the IRI group maintaining a normal and healthy liver status. The pathology mechanism of C-NPs in hepatic IRI was confirmed to be scavenging of excessive ROS by C-NPs. The effective therapeutic treatment of C-NPs in living animals revealed a great potential in clinical prevention for hepatic IRI.

Conversion of biochar to sulfonated solid acid catalysts for spiramycin hydrolysis: Insights into the sulfonation process

Biochar has been recognized as a sustainable platform for developing functional materials including catalysts. This work demonstrated a method of converting biochar to sulfonated solid-acid catalysts, and the effectiveness of the catalysts for spiramycin hydrolysis was examined. Two biochar samples (H and X) were sulfonated with three reagents (concentrated H₂SO₄, ClSO₃H and p-toluenesulfonic acid (TsOH)) under hydrothermal, simple heating, ambient temperature, and CHCl₃-assisted treatments. The effect of elemental compositions and structural characteristics of the feeding materials (H and X) on the acidic properties of the sulfonated biochars were investigated. The results showed that the sulfonation ability of the three reagents was in the order of ClSO₃H > H₂SO₄ > TsOH, while hydrothermal treatment provided the highest total acidity, and largest amount of acidic groups (e.g., SO₃H, COOH and Ar-OH). Biochar X with higher O/C and N contents, and less graphitic features showed superior acidic properties than biochar H under all the employed treatments. The hydrolytic efficiencies of the sulfonated biochars under 200 W of microwave irradiation increased with increasing total acidity, and the amount of SO₃H and COOH groups. After sulfonation, the O/C of biochars increased, while H/C decreased, and the aromatic and graphitic features did not change. The electromagnetic energy absorbed by the sulfonated biochars did not notably contribute to spiramycin hydrolysis. Thus, this work demonstrated an effective and promising method for maneuvering biochar-based functional solid-acid catalysts for antibiotic remediation in contaminated water.

Preparation of Carbon-Based Solid Acid Catalysts Using Rice Straw Biomass and Their Application in Hydration of α-Pinene

Carbon-based solid acid catalysts were prepared using rice straw (RS) waste, and the effects of carbonization temperature and sulfonation temperature on the catalytic activity were investigated. The properties of the catalysts were characterized using thermo gravimetric (TG), scanning electron microscope (SEM), Brunauer–Emmet–Teller (BET), Fourier transform infrared spectroscopy (FT-IR), temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS), and their activities were investigated through the hydration of α-pinene. The conversion of α-pinene and the selectivity of α-terpineol reached 67.60% and 57.07% at 80 °C and atmospheric pressure in 24 h, respectively. The high catalytic capacity of the catalyst is attributed to the high acid site density and high porosity of the catalyst. TPD analysis and FT-IR spectroscopy showed that the catalyst produced by low-temperature carbonization at 300 °C followed by low-temperature sulfonation at 80 °C had abundant strong acid sites (0.82 mmol/g), which can effectively inhibit the side reactions of hydrated α-pinene. The total acidity reached 2.87 mmol/g. N2-physisorption analysis clearly indicated that the obtained catalysts were mesopore-predominant materials, and the SBET and VTotal of catalysts reached 420.9 m2/g and 4.048 cm3/g, respectively. Preparation of the catalyst involves low energy consumption, and its cheap raw materials make the whole process simple, economical, and environmentally friendly.

Fe3O4@C@OSO3H as an efficient, recyclable magnetic nanocatalyst in Pechmann condensation: green synthesis, characterization, and theoretical study

Novel sulfonated carbon-coated magnetic nanoparticles (SCCMNPs; Fe₃O₄@C@OSO₃H) were designed, synthesized, characterized, and applied as an efficient nanocatalyst for green synthesis of coumarin derivatives through Pechmann condensation. The Fe₃O₄@C@OSO₃H was manufactured through a simple and inexpensive two-step procedure and characterized by FTIR, EDX, XRD, SEM, TEM, DLS, VSM, and TGA techniques. It was identified as an efficient heterogeneous catalyst in the Pechmann condensation of phenol derivatives and β-ketoesters, leading to high-yield coumarin derivatives under solvent-free conditions. The Fe₃O₄@C@OSO₃H removed after reaction finishing point by an external magnet, and it was reused fifteen times at the same conditions. Besides, theoretical studies were carried out using B3LYP/6-311++G(d,p) to more consideration of the reaction mechanism. The study of the frontier molecular orbitals, NBO atomic charges, molecular electrostatic potential of reactants, as well as Pechmann condensation mechanism was known very useful in suitable reactant choice. The reaction was performed through the electrophilic attack, dehydration, and trans-esterification, respectively.

Natural Nanofibrous Cellulose-Derived Solid Acid Catalysts

Solid acid catalysts (SACs) have attracted continuous research interest in past years as they play a pivotal role in establishing environmentally friendly and sustainable catalytic processes for various chemical industries. Development of low-cost and efficient SACs applicable to different catalysis processes are of immense significance but still very challenging so far. Here, we report a new kind of SACs consisting of sulfonated carbon nanofibers that are prepared via incomplete carbonization of low-cost natural nanofibrous cellulose followed by sulphonation with sulfuric acid. The prepared SACs feature nanofibrous network structures, high specific surface area, and abundant sulfonate as well as hydroxyl and carboxyl groups. Remarkably, the nanofibrous SACs exhibit superior performance to the state-of-the-art SACs for a wide range of acid-catalyzed reactions, including dimerization of α-methylstyrene, esterification of oleic acid, and pinacol rearrangement. The present approach holds great promise for developing new families of economic but efficient SACs based on natural precursors via scalable and sustainable protocols in the future.

Green chemical engineering in China

In China, the rapid development greatly promotes the national economic power and living standard but also inevitably brings a series of environmental problems. In order to resolve these problems fundamentally, Chinese scientists have been undertaking research in the area of green chemical engineering (GCE) for many years and achieved great progresses. In this paper, we reviewed the research progresses related to GCE in China and screened four typical topics related to the Chinese resources characteristics and environmental requirements, i.e. ionic liquids and their applications, biomass utilization and bio-based materials/products, green solvent-mediated extraction technologies, and cold plasmas for coal conversion. Afterwards, the perspectives and development tendencies of GCE were proposed, and the challenges which will be faced while developing available industrial technologies in China were mentioned.

Deactivation and Regeneration of Sulfonated Carbon Catalysts in Hydrothermal Reaction Environments

The deactivation pathways of sulfonated carbon catalysts prepared from different carbons were studied during the aqueous-phase hydrolysis of cellobiose under continuous-flow conditions. The sulfonation of carbon materials with a low degree of graphitization introduced sulfonic acid groups that are partially stable even during prolonged exposure to harsh hydrothermal treatment conditions (180 °C). The physicochemical characterization of hydrothermally treated materials coupled with the treatment of model compounds for sulfonic acids demonstrated that the stability is related to the presence of activating and deactivating substituents on the aromatic system. Besides sulfonic acid group leaching, a hitherto unknown mode of deactivation was identified that proceeds by the ion exchange of cations contained in the aqueous feed and protons of the sulfonic acid groups. Proton leaching is a fully reversible mode of deactivation by the treatment of the spent catalysts with strong Brønsted acids. Through a combined approach of physicochemical characterization, catalytic testing, and hydrothermal treatment, a methodology for the preparation of catalytically stable carbon materials that bear sulfonic acid groups was established.

Microwave-Assisted Conversion of Fructose to 5-Hydroxymethylfurfural Using Sulfonated Porous Carbon Derived from Biomass

In this study, a series of sulfonated carbon solid acid catalysts was prepared by a template method using fructose as the carbon source and zinc chloride as the catalyst and template. The reaction involving fructose dehydration to 5-hydroxymethylfurfural (5-HMF) was investigated using these catalysts with microwave assistance in dimethyl sulfoxide. The influence of different catalysts, catalyst amount, microwave power, fructose content, and reaction temperature, as well as the reusability of the catalyst, were investigated. The prepared catalysts were characterised by X-ray diffraction, FT-IR spectroscopy, scanning electron microscopy, nitrogen adsorption–desorption measurement, and temperature-programmed desorption of ammonia gas, and the total numbers of surface acid sites of these carbon-based solid acid catalysts were analysed by chemical adsorption–desorption of ammonia along with the standard curve for ammonia. The results revealed that the C2-SO3H catalyst exhibited the best activity. A 5-HMF yield of 87 % and fructose conversion of 99 % were achieved at 170°C in DMSO after 3 min. The microwave-assisted synthetic strategy was advantageous compared with the traditional method because this approach could shorten the total reaction time.

Cellulose: To depolymerize… or not to?

Oxidation of the primary OH groups in cellulose is a pivotal reaction both at lab and industrial scale, leading to the value-added products, i.e. oxidized cellulose which have tremendous applications in medicine, pharmacy and hi-tech industry. Moreover, the introduction of carboxyl moieties creates prerequisites for further cellulose functionalization through covalent attachment or electrostatic interactions, being an essential achievement designed to boost the area of cellulose-based nanomaterials fabrication. Various methods for the cellulose oxidation have been developed in the course of time, aiming the selective conversion of the OH groups. These methods use: nitrogen dioxide in chloroform, alkali metal nitrites and nitrates, strong acids alone or in combination with permanganates or sodium nitrite, ozone, and sodium periodate or lead (IV) tetraacetate. In the case of the last two reagents, cellulose dialdehydes derivatives are formed, which are further oxidized by sodium chlorite or hydrogen peroxide to form dicarboxyl groups. A major improvement in the cellulose oxidation was represented by the introduction of the stable nitroxyl radicals, such as 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). However, a major impediment for the researchers working in this area is related with the severe depolymerisation occurred during the TEMPO-mediated conversion of CH₂OH into COOH groups. On the other hand, the cellulose depolymerisation represent the key step, in the general effort of searching for alternative strategies to develop new renewable, carbon-neutral energy sources. In this connection, exploiting the biomass feed stocks to produce biofuel and other low molecular organic compounds, involves a high amount of research to improve the overall reaction conditions, limit the energy consumption, and to use benign reagents. This work is therefore focused on the parallelism between these two apparently antagonist processes involving cellulose, building a necessary bridge between them, thinking how the reported drawbacks of the TEMPO-mediated oxidation of cellulose are heading towards to the biomass valorisation, presenting why the apparently undesired side reactions could be turned into beneficial processes if they are correlated with the existing achievements of particular significance in the field of cellulose conversion into small organic compounds, aiming the general goal of pursuing for alternatives to replace the petroleum-based products in human life.

Black liquor-derived carbonaceous solid acid catalyst for the hydrolysis of pretreated rice straw in ionic liquid

Lignin-containing black liquor from pretreatment of rice straw by KOH aqueous solution was applied to prepare a carbonaceous solid acid catalyst, in which KOH played dual roles of extracting lignin from rice straw and developing porosity of the carbon material as an activation agent. The synthesized black liquor-derived carbon material was applied in catalytic hydrolysis of the residue solid from the pretreatment of rice straw, which was mainly composed of cellulose and hemicellulose, and showed excellent activity for the production of total reducing sugars (TRS) in ionic liquid, 1-butyl-3-methyl imidazolium chloride. The highest TRS yield of 63.4% was achieved at 140°C for 120min, which was much higher than that obtained from crude rice straw under the same reaction conditions (36.6% TRS yield). Overall, this study provides a renewable strategy for the utilization of all components of lignocellulosic biomass.

High-performance carbon-based solid acid prepared by environmental and efficient recycling of PVC waste for cellulose hydrolysis

Pyrolysis techniques can provide a way to convert polyvinyl chloride (PVC) waste into high value liquids and gases.

Esterification of fatty acids from waste cooking oil to biodiesel over a sulfonated resin/PVA composite

PVA enhances the catalytic activity and reusability of s-CER/PVA for esterification by absorbing the water produced and liberating reactive –SO₃H sites.

Hydrolysis of Selected Tropical Plant Wastes Catalyzed by a Magnetic Carbonaceous Acid with Microwave

In this study, magnetic carbonaceous acids were synthesized by pyrolysis of the homogeneous mixtures of glucose and magnetic Fe3O4 nanoparticles, and subsequent sulfonation. The synthesis conditions were optimized to obtain a catalyst with both high acid density (0.75 mmol g(-1)) and strong magnetism [magnetic saturation, Ms = 19.5 Am(2) kg(-1)]. The screened catalyst (C-SO3H/Fe3O4) was used to hydrolyze ball-milled cellulose in a microwave reactor with total reducing sugar (TRS) yield of 25.3% under the best conditions at 190 °C for 3.5 h. It was cycled for at least seven times with high catalyst recovery rate (92.8%), acid density (0.63 mmol g(-1)) and magnetism (Ms = 12.9 Am(2) kg(-1)), as well as high TRS yield (20.1%) from the hydrolysis of ball-milled cellulose. The catalyst was further successfully tested for the hydrolysis of tropical biomass with high TRS and glucose yields of 79.8% and 58.3% for bagasse, 47.2% and 35.6% for Jatropha hulls, as well as 54.4% and 35.8% for Plukenetia hulls.

Importance of Internal Porosity for Glucan Adsorption in Mesoporous Carbon Materials

To better understand the adsorption of long-chain poly(1 → 4)-β-D-glucans on carbon surfaces as well as interactions responsible for this adsorption, we use a comparative study involving mesoporous carbon-silica composite materials that have been etched to varying degrees and all-atom molecular dynamics simulations. The materials synthesized as part of this etching study consist of an as-synthesized composite material (MCN-MSN), MCN-MSN-0.5 (composite materials consisting of 50% carbon by mass), MCN-MSN-0.3 (composite materials consisting of 70% carbon by mass), and MCN, in which silica etching was conducted using an aqueous ethanolic solution of either NaOH or HF. Data for the adsorption of long-chain glucans to these materials from concentrated aqueous HCl (37 wt %) solution demonstrate a direct relationship between the amount of β-glu adsorption and the magnitude of exposed carbon mesopore surface area, which systematically increases and is also accompanied by an increase in the mesopore size during silica etching. This demonstrates β-glu adsorption as occurring on internal carbon mesopores rather than exclusively on the external carbon surface. These experimental data on adsorption were corroborated by molecular dynamics (MD) simulations of β-glu adsorption to a graphene bilayer separated by a distance of 3.2 nm, chosen to correspond to the carbon mesopore diameter of the experimental system. Simulation results using a variety of β-glu solvent systems demonstrate the rapid adsorption of a β-glu strand on the graphitic carbon surface via axial coupling and are consistent with experimentally observed trends in fast adsorption kinetics. Solvent-mediated effects such as small-scale hydrophobicity and preferential interactions with ions are shown to play important roles in modulating glucan adsorption to carbon surfaces, whereas experimental data on hydrophobically modified silica demonstrate that hydrophobicity in and of itself is insufficient to cause β-glu adsorption from concentrated aqueous HCl solution.

Synergistic effect between defect sites and functional groups on the hydrolysis of cellulose over activated carbon

The chemical oxidation of activated carbon by H2 O2 and H2 SO4 is investigated, structural and chemical modifications are characterized, and the materials are used as catalysts for the hydrolysis of cellulose. Treatment with H2 O2 enlarges the pore size and imparts functional groups such as phenols, lactones, and carboxylic acids. H2 SO4 treatment targets the edges of carbon sheets primarily, and this effect is more pronounced with a higher temperature. Adsorption isotherms demonstrate that the adsorption of oligomers on functionalized carbon is dominated by van der Waals forces. The materials treated chemically are active for the hydrolysis of cellulose despite the relative weakness of most of their acid sites. It is proposed that a synergistic effect between defect sites and functional groups enhances the activity by inducing a conformational change in the glucan chains if they are adsorbed at defect sites. This activates the glycosidic bonds for hydrolysis by in-plane functional groups.

Cellulose sulfonic acid as a green, efficient, and reusable catalyst for Nazarov cyclization of unactivated dienones and pyrazoline synthesis

A high yielding and eco-friendly procedure for the preparation of cyclopentenoid and pyrazoline derivatives via cellulose sulfonic acid-mediated electrocyclization processes.

Sustainable conversion of cellulosic biomass to chemicals under visible-light irradiation

Plasmonic nanostructure: a high conversion (>60%) of crystalline cellulose to chemicals was achieved with enhanced electromagnetic fields, E/E₀ = 10³ to 10⁶ times.

A new hypercrosslinked supermicroporous polymer, with scope for sulfonation, and its catalytic potential for the efficient synthesis of biodiesel at room temperature

A new supermicroporous polymer with a BET surface area of 913 m² g⁻¹ has been synthesized via Friedel–Crafts alkylation between carbazole and α,α′-dibromo-p-xylene.

Preparation of a novel carbon-based solid acid from cassava stillage residue and its use for the esterification of free fatty acids in waste cooking oil

A novel carbon-based solid acid catalyst was prepared by the sulfonation of incompletely carbonized cassava stillage residue (CSR) with concentrated sulfuric acid, and employed to catalyze the esterification of methanol and free fatty acids (FFAs) in waste cooking oil (WCO). The effects of the carbonization and the sulfonation temperatures on the pore structure, acid density and catalytic activity of the CSR-derived catalysts were systematically investigated. Low temperature carbonization and high temperature sulfonation can cause the collapse of the carbon framework, while high temperature carbonization is not conducive to the attachment of SO3H groups on the surface. The catalyst showed high catalytic activity for esterification, and the acid value for WCO is reduced to below 2mg KOH/g after reaction. The activity of catalyst can be well maintained after five cycles. CSR can be considered a promising raw material for the production of a new eco-friendly solid acid catalyst.

A comparative study of solid carbon acid catalysts for the esterification of free fatty acids for biodiesel production. Evidence for the leaching of colloidal carbon

The preparation of a variety of sulfonated carbons and their use in the esterification of oleic acid is reported. All sulfonated materials show some loss in activity associated with the leaching of active sites. Exhaustive leaching shows that a finite amount of activity is lost from the carbons in the form of colloids. Fully leached catalysts show no loss in activity upon recycling. The best catalysts; 1, 3, and 6; show initial TOFs of 0.07 s(-1), 0.05 s(-1), and 0.14 s(-1), respectively. These compare favorably with literature values. Significantly, the leachate solutions obtained from catalysts 1, 3, and 6, also show excellent esterification activity. The results of TEM and catalyst poisoning experiments on the leachate solutions associate the catalytic activity of these solutions with carbon colloids. This mechanism for leaching active sites from sulfonated carbons is previously unrecognized.