Graphene oxide/α-Bi(2)O(3) composites for visible-light photocatalysis, chemical catalysis, and solar energy conversion

UV/H2O2/Ferrioxalate Based Integrated Approach to Decolorize and Mineralize Reactive Blue Dye: Optimization Through Response Surface Methodology

The decolorization and mineralization of Reactive Blue 222 dye was studied using UV/H2O2/ferrioxalate approach in combination with Pleorotus ostreatus. The dye was decolorized by UV/H2O2/ferrioxalate based advanced oxidation process (AOP) at different levels of process variables dye concentration, catalyst dose, pH, reaction time and resultantly, 80% decolorization was achieved. Pleorotus ostreatus treatment enhanced the dye degradation up to 92% at optimum levels of pH, temperature, inoculum size, carbon and nitrogen sources at specific concentration. Response Surface Methodology (RSM) was employed for optimization under face-centered central composite design (CCD). Although both treatments were found efficient for the removal of dye, but on applying the integrated approach, 96% dye removal was obtained which led to complete degradation of the dye. FTIR analysis confirmed the degradation of dye into low mass compounds. The water quality assurance parameters were measured to assess the mineralization efficiency. A significant reduction in COD (94%) and TOC (92%) were found when dye was degraded integrated approach. A phytotoxicity analysis on Pisum sativum plant revealed the non-toxic behavior of metabolites produced. Results revealed that the integrated approach is highly promising for the decolorization and mineralization of the Reactive Blue 222 dye and is also extendable to treat the dye in textile wastewater.

Graphene–Magnetic Spinel Ferrite Nanocomposite: Facile Synthesis and Excellent Photocatalytic Performance

Spinel ferrite structured ZnFe2O4 nanoparticles anchored on reduced graphene oxide (rGO) sheets have been prepared via a facile hydrothermal method combined with a solvothermal approach. For the synthesis of the ZnFe2O4/rGO nanocomposites, the rGO nanosheet contains epoxy functional groups serving as the active sites, which allowed the formation of uniform ZnFe2O4 nanoparticles. Due to the structure of the ZnFe2O4/RGO nanocomposites, the aggregation of the ZnFe2O4 nanoparticles can be readily disrupted and electronic transfer through the rGO nanosheets is accelerated. This could in turn enhance the photocatalytic efficiency. It was also demonstrated that ZnFe2O4/rGO (40 wt-%) hybrid nanocomposites almost reached adsorption equilibrium in the RhB dye within 60min. The Langmuir equation model showed that the photodegradation of RhB was well fitted to first order reaction kinetics with k=0.6254min−1. This illustrated that the addition of GO could reduce the bandgap of pure ZnFe2O4, which avoided the combination of electrons and holes. The ZnFe2O4/rGO nanocomposites could also enhance the utilisation of sunlight. In addition, the ZnFe2O4/rGO nanocomposite photocatalyst also demonstrated a supramagnetic property, holding potential to be utilised for water treatment.

Ultrastable Graphene-Encapsulated 3 nm Nanoparticles by In Situ Chemical Vapor Deposition

Nanoscale materials offer enormous opportunities for catalysis, sensing, energy storage, and so on, along with their superior surface activity and extremely large surface area. Unfortunately, their strong reactivity causes severe degradation and oxidation even under ambient conditions and thereby deteriorates long-term usability. Here superlative stable graphene-encapsulated nanoparticles with a narrow diameter distribution prepared via in situ chemical vapor deposition (CVD) are presented. The judiciously designed CVD protocol generates 3 nm size metal and ceramic nanoparticles intimately encapsulated by few-layer graphene shells. Significantly, graphene-encapsulated Co₃ O₄ nanoparticles exhibit outstanding structural and functional integrity over 2000 cycles of lithiation/delithiation for Li-ion battery anode application, accompanied by 200% reversible volume change of the inner core particles. The insight obtained from this approach offers guidance for utilizing high-capacity electrode materials for Li-ion batteries. Furthermore, this in situ CVD synthesis is compatible with many different metal precursors and postsynthetic treatments, including oxidation, phosphidation, and sulfidation, and thus offers a versatile platform for reliable high-performance catalysis and energy storage/conversion with nanomaterials.

Facile Fabrication of Dumbbell-Like β-Bi₂O₃/Graphene Nanocomposites and Their Highly Efficient Photocatalytic Activity

β-Bi₂O₃ decorated graphene nanosheets (β-Bi₂O₃/GN) were prepared by a facile solution mixing method. The crystal structure, surface morphology, and photo absorbance properties of the products were characterized by XRD, SEM, and UV-VIS diffuse reflection, respectively. Moreover, the effect of graphene content on photocatalytic activity was systematically investigated, and the results indicated that these composites possessed a high degradation rate of Rhodamine B (RhB), which was three times higher than that of bare β-Bi₂O₃ when graphene content was 1 wt %. This high photocatalytic activity was attributed predominantly to the presence of graphene, which served as an electron collector and transporter to efficiently lengthen the lifetime of the photogenerated charge carriers from β-Bi₂O₃.

Cu2(OH)PO4/reduced graphene oxide nanocomposites for enhanced photocatalytic degradation of 2,4-dichlorophenol under infrared light irradiation

Sparked by the growing environmental crises, photocatalytic degradation of chlorophenols with inexhaustible solar energy is expected to be converted into actual applications. Here, we report the preparation of the nanocomposite of Cu2(OH)PO4 and reduced graphene oxide (Cu2(OH)PO4/rGO) through a one-step hydrothermal method and examined its infrared-light photocatalytic activity in the degradation of 2,4-dichlorophenol (2,4-DCP). As evidenced by the absorption spectra and the degradation of 2,4-DCP, Cu2(OH)PO4/rGO exhibited enhanced infrared light-driven photocatalytic activity compared to pure Cu2(OH)PO4 and was very stable even after repeated cycling. More importantly, the introduction of hydrogen peroxide (H2O2) could combine the photocatalytic and photo-Fenton effects into one reaction system and maximize the infrared light photocatalytic efficiency. Typically, the rate constant of Cu2(OH)PO4/rGO and H2O2 was more than 6.25 times higher than that of only Cu2(OH)PO4/rGO, and almost 10 times greater than the value for pure Cu2(OH)PO4. Further, a plausible mechanism for the enhanced photocatalytic properties of Cu2(OH)PO4/rGO has been discussed. These findings may help the development of novel hybrid photocatalysts with enhanced infrared light photocatalytic activity for applications in the treatment of chlorophenol-contaminated wastewater.

A Green Approach to the Synthesis of Reduced Graphene Oxide using Sodium Humate

A green and simple chemistry approach was demonstrated to prepare reduced graphene oxide (rGO) using sodium humate (SH) as the reducing agent. Without using toxic and harmful chemicals, this method is environmentally friendly and suitable for the large-scale production of graphene. At first, the improved Hummers method to oxidize graphite for the synthesis of graphene oxide (GO) was applied, and then the as-prepared GO was reduced by SH to form rGO. Characterization was performed using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectrometry (XPS) and Raman spectra. The intensity ratio of the D and G band (ID/IG) of GO after reduction with SH increases from 0.96 (GO) to 1.11 (rGO), the results obtained from the Raman spectra proved high purity of the final products.

Enhanced photocatalytic activity on polarized ferroelectric KNbO3

In this paper, we demonstrate the enhanced photodegradation of rhodamine B on polarized ferroelectric KNbO₃ (KNO) particles.

SnO₂(β-Bi₂O₃)/Bi₂Sn₂O₇ nanohybrids doped with Pt and Pd nanoparticles: applications in visible light photocatalysis, electrical conductivity and dye-sensitized solar cells

Bi2O3-SnO2 nanocomposites formed at a nominal molar ratio of 3 : 1 and loaded with Pd/Pt nanoparticles synthesized by a sol gel-hydrothermal method with the aid of a template were thoroughly characterized by X-ray diffraction, TEM-EDX, N2 sorptiometry, diffuse reflectance UV-Vis, FTIR, photoluminescence and electrical conductivity. It has been shown that Pd and Pt stimulate the existence of β-Bi2O3 and SnO2, respectively together with the key component Bi2Sn2O7. The photocatalytic results indicate that Pd/β-Bi2O3-Bi2Sn2O7 revealed a remarkable performance for the degradation of methylene blue (MB) dye as compared to the Pt/SnO2-Bi2Sn2O7 and Bi2O3-SnO2 samples in both the UV and visible regions. The enhanced photocatalytic activity of the Pd/β-Bi2O3-Bi2Sn2O7 nanocomposite is primarily attributed to the broad contact between the β-Bi2O3 and Bi2Sn2O7 phases, which indicates high mesoporosity and heterojunction structures resulting in separation efficacy between photo-induced electron-hole pairs. Specifically, the photosensitive β-Bi2O3 is easily excited and released electrons to be accepted by Bi2Sn2O7 and Pd that might be deposited in the interlayer between β-Bi2O3 and Bi2Sn2O7. The degradation mechanism of MB over Pd/β-Bi2O3-Bi2Sn2O7 in the visible region showed that the dye degradation proceeds through evolution of ˙O2(-) and ˙OH radicals as evaluated using photoluminescence and free radical trapping experiments. An insight into the electrical properties including the dielectric constant and impedance of the materials indicates that Pd/β-Bi2O3-Bi2Sn2O7 has the highest conductivity based on increasing the ionic transport and defects at the β-Bi2O3/Bi2Sn2O7 heterojunction. This material displayed an improved photocurrent response of a higher power conversion efficiency, exceeding that of Pt/SnO2-Bi2Sn2O7 and SnBi3 by 50% and 250%, respectively, in dye-sensitized solar cells. Picosecond-resolved photoluminescence (PL) and polarization gated PL anisotropy measurements were combined to clarify the process of FRET from the excited Pd/β-Bi2O3-Bi2Sn2O7 to SD N719. This indicates that the latter structure can be proposed as a multifunctional candidate for use in dye-sensitized solar cells, as an electrical material and as an efficient photocatalyst based on its versatile structure.

Photoluminescence and labelling for microcrack bone of N-salicylidene-3-amino-1,2,4-triazole

A new Schiff base of N-salicylidene-3-amino-1,2,4-triazole (SAT) was synthesized and its photoluminescent, photochromic and thermochromic properties were characterized and demonstrated. The fluorescence lifetime and quantum yield of SAT were measured and the microcrack bone imaging using SAT as a fluorescent label was observed by laser scanning confocal microscope (LSCM). The absorption spectrum of SAT was demonstrated using DFT/TD-DFT calculation.

One-step synthesis of Bi2WO6/Bi2O3 loaded reduced graphene oxide multicomponent composite with enhanced visible-light photocatalytic activity

Schematic diagram of charge separation in visible-light irradiation and the energy band mechanism of enhanced photocatalytic activity of BWO@R.

Encapsulating Bi2Ti2O7 (BTO) with reduced graphene oxide (RGO): an effective strategy to enhance photocatalytic and photoelectrocatalytic activity of BTO

Multimetal oxides (AxByOz) offer a higher degree of freedom compared to single metal oxides (AOx) in that these oxides facilitate (i) designing nanomaterials with greater stability, (ii) tuning of the optical bandgap, and (iii) promoting visible light absorption. However, all AxByOz materials such as pyrochlores (A2B2O7)--referred to here as band-gap engineered composite oxide nanomaterials or BECONs--are traditionally prone to severe charge recombination at their surface. To alleviate the charge recombination, an effective strategy is to employ reduced graphene oxide (RGO) as a charge separator. The BECON and the RGO with oppositely charged functional groups attached to them can be integrated at the interface by employing a simple electrostatic self-assembly approach. As a case study, the approach is demonstrated using the Pt-free pyrochlore bismuth titanate (BTO) with RGO, and the application of the composite is investigated for the first time. When tested as a photocatalyst toward hydrogen production, an increase of ∼ 250% using BTO in the presence of RGO was observed. Further, photoelectrochemical measurements indicate an enhancement of ∼ 130% in the photocurrent with RGO inclusion. These two results firmly establish the viability of the electrostatic approach and the inclusion of RGO. The merits of the RGO addition is identified as (i) the RGO-assisted improvement in the separation of the photogenerated charges of BTO, (ii) the enhanced utilization of the charges in a photocatalytic process, and (iii) the maintenance of the BTO/RGO structural integrity after repeated use (established through reusability analysis). The success of the self-assembly strategy presented here lays the foundation for developing other forms of BECONs, belonging to perovskites (ABO3), sillenite (A12BO20), or delafossite (ABO2) groups, hitherto written off due to limited or no photoelectrochemicalactivity.

High photocatalytic performance by engineering Bi2WO6 nanoneedles onto graphene sheets

A sonochemical method was described to engineer Bi₂WO₆ nanoneedles on graphene sheets, which showed improved performances both in H₂ and O₂ creation.