The Influence of Zeolites on Radical Formation During Lignin Pyrolysis

Elucidation of site-specific red-ox kinetics in the CO-assisted N2O decomposition over Fe-ferrierite by combining modulation excitation with operando EPR spectroscopy

The catalytic conversion of N2O over Fe-exchanged zeolites is an essential process for controlling its anthropogenic emissions and detrimental environmental impact. In the present study, we monitored an industrial Fe-ferrierite catalyst under conditions of CO-assisted decomposition of N2O using operando electron paramagnetic resonance (EPR) spectroscopy within the modulated excitation (ME) paradigm. Exploiting this approach, we demonstrated that N2O decomposition occurs via reversible FeII/FeIII transitions localized exclusively on isolated FeII centers located in the β-cationic position, successfully distinguished among various spectator species. The temporal evolution of the reversible β-FeII/FeIII transitions under oxidizing and reducing atmospheres was determined with multivariate curve resolution (MCR) and via double integration of their EPR signal, allowing us to calculate the apparent activation energies for the oxidation and reduction half-cycles. Despite the reaction is controlled by the reduction half-cycle, i.e. N2O promotes full oxidation of the active β-FeII centres irrespective of temperature, the kinetic results indicate that temperature enhances the rate of this oxidation reaction more than the rate of reduction in CO-rich conditions. This study shows that quantitative and qualitative reaction monitoring at sub-minute temporal resolution via operando EPR spectroscopy is possible and sufficient signal-to-noise can be obtained if the experiments are performed according to the ME approach and if phase-sensitive detection (PSD) is employed. Furthermore, our results also indicate that analytical methods, such as MCR, can produce reliable results in the framework of time-resolved EPR spectroscopy.

Radical footprinting and regularity revealing during the pyrolysis of technical lignins

Revealing radical-mediated reactions is conducive to illustrate lignin pyrolysis and achieve subsequent regulation. Three technical lignins (hot-water-extracted lignin, kraft lignin, and soda lignin) were selected in this study and pyrolyzed from 400 °C to 700 °C, and their pyrolysis radicals in both chars and bio-oils were monitored with the electron paramagnetic resonance spectrometer. Results showed that spin concentrations of char radicals had a volcanic trend against the pyrolysis temperature, and reached the maximum values at 550-600 °C. However, the contents of bio-oil radicals were low during pyrolysis at low and medium temperature, but their spin concentrations exploded abruptly over 600-650 °C. Meanwhile, the bio-oil yields were found to drop after 550-600 °C, and the three inflection temperatures for char radicals, bio-oil radicals, and bio-oil yields were perfectly matched. These findings systematically elucidated the radical regularity in technical lignin pyrolysis and fundamentally contributed to the development of radical-mediated lignin pyrolysis mechanisms.

First-Generation Organic Reaction Intermediates in Zeolite Chemistry and Catalysis

Zeolite chemistry and catalysis are expected to play a decisive role in the next decade(s) to build a more decentralized renewable feedstock-dependent sustainable society owing to the increased scrutiny over carbon emissions. Therefore, the lack of fundamental and mechanistic understanding of these processes is a critical "technical bottleneck" that must be eliminated to maximize economic value and minimize waste. We have identified, considering this objective, that the chemistry related to the first-generation reaction intermediates (i.e., carbocations, radicals, carbenes, ketenes, and carbanions) in zeolite chemistry and catalysis is highly underdeveloped or undervalued compared to other catalysis streams (e.g., homogeneous catalysis). This limitation can often be attributed to the technological restrictions to detect such "short-lived and highly reactive" intermediates at the interface (gas-solid/solid-liquid); however, the recent rise of sophisticated spectroscopic/analytical techniques (including under in situ/operando conditions) and modern data analysis methods collectively compete to unravel the impact of these organic intermediates. This comprehensive review summarizes the state-of-the-art first-generation organic reaction intermediates in zeolite chemistry and catalysis and evaluates their existing challenges and future prospects, to contribute significantly to the "circular carbon economy" initiatives.

Technology Overview of Fast Pyrolysis of Lignin: Current State and Potential for Scale-Up

Lignin is an abundant natural polymer obtained from lignocellulosic biomass and rich in aromatic substructures. When efficiently depolymerized, it has great potential in the production of value-added chemicals. Fast pyrolysis is a promising depolymerization method, but current studies focus mainly on small quantities of lignin. In this Review, to determine the potential for upscaling, systems used in the most relevant unit operations of fast pyrolysis of lignin are evaluated. Fluidized-bed reactors have the most potential. It would be beneficial to combine them with the following: slug injectors for feeding, hot particle filters, cyclones, and fractional condensation for product separation and recovery. Moreover, upgrading lignin pyrolysis oil would allow the necessary quality parameters for particular applications to be reached.

Quantification of Redox Sites during Catalytic Propane Oxychlorination by Operando EPR Spectroscopy

Identification and quantification of redox-active centers at relevant conditions for catalysis is pivotal to understand reaction mechanisms and requires development of advanced operando methods. Herein, we demonstrate operando EPR spectroscopy as an important technique to quantify the oxidation state of representative CrPO₄ and EuOCl catalysts during propane oxychlorination, an attractive route for propylene production. In particular, we show that the space-time-yield of C₃ H₆ correlates with the amount of Cr²⁺ and Eu²⁺ ions generated over the catalysts during reaction. These results provide a powerful strategy to gather quantitative understanding of selective alkane oxidation, which could potentially be extrapolated to other functionalization approaches and operating conditions.

Enhancement of the production of bio-aromatics from renewable lignin by combined approach of torrefaction deoxygenation pretreatment and shape selective catalytic fast pyrolysis using metal modified zeolites

In this work, combined approach of torrefaction deoxygenation pretreatment (TDP) and shape selective catalytic fast pyrolysis (SS-CFP) using bifunctional catalyst (metal modified HZSM-5) were employed to improve the yield of bio-BTX derived from the renewable starting material of lignin. Results showed that after TDP, the oxygen element could be removed effectively. The oxygen removal efficiency reached its maximum value of 22.27% at 300 °C, resulting in markedly decrease of unnecessary oxygenates in bio-oil. Compared to parent HZSM-5, all metal modified HZSM-5 (Ga/HZSM-5, Zn/HZSM-5, and Ga-Zn/HZSM-5) promoted the formation of bio-BTX. Zn/HZSM-5 showed the highest selective yield of bio-BTX because of the enhancement deoxygenation reaction of oxygenates and the aromatization reaction of olefins. The combined approach of TDP and SS-CFP remarkably improved the selective yield of bio-BTX, reaching the maximum value of 65.19%, which was much higher than that from single approach of TDP (33.84%) and SS-CFP (47.36%).

A Study of the Mechanisms of Guaiacol Pyrolysis Based on Free Radicals Detection Technology

In order to understand the reaction mechanism of lignin pyrolysis, the pyrolysis process of guaiacol (o-methoxyphenol) as a lignin model compound was studied by free radical detection technology (electron paramagnetic resonance, EPR) in this paper. It was proven that the pyrolysis reaction of guaiacol is a free radical reaction, and the free radicals which can be detected mainly by EPR are methyl radicals. This paper proposes a process in which four free radicals (radicals 1- C6H4(OH)O*, radicals 5- C6H4(OCH3)O*, methyl radicals, and hydrogen radicals) are continuously rearranged during the pyrolysis of guaiacol.

New analytical tools for advanced mechanistic studies in catalysis: photoionization and photoelectron photoion coincidence spectroscopy

How can we detect reactive and elusive intermediates in catalysis to unveil reaction mechanisms? In this mini review, we discuss novel photoionization tools to support this quest.

Pore selectivity and electron transfers in HZSM-5 single crystals: a Raman microspectroscopy mapping and confocal fluorescence imaging combined study

Electron transfers at the single particle level in HZSM-5 zeolite are followed by combining Raman microspectroscopy mapping and confocal fluorescence imaging. The effects of pore accessibility and guest diffusion on reactivity are investigated.

Understanding the mechanism of catalytic fast pyrolysis by unveiling reactive intermediates in heterogeneous catalysis

Catalytic fast pyrolysis is a promising way to convert lignin into fine chemicals and fuels, but current approaches lack selectivity and yield unsatisfactory conversion. Understanding the pyrolysis reaction mechanism at the molecular level may help to make this sustainable process more economic. Reactive intermediates are responsible for product branching and hold the key to unveiling these mechanisms, but are notoriously difficult to detect isomer-selectively. Here, we investigate the catalytic pyrolysis of guaiacol, a lignin model compound, using photoelectron photoion coincidence spectroscopy with synchrotron radiation, which allows for isomer-selective detection of reactive intermediates. In combination with ambient pressure pyrolysis, we identify fulvenone as the central reactive intermediate, generated by catalytic demethylation to catechol and subsequent dehydration. The fulvenone ketene is responsible for the phenol formation. This technique may open unique opportunities for isomer-resolved probing in catalysis, and holds the potential for achieving a mechanistic understanding of complex, real-life catalytic processes.

The conversion of lignin by catalytic fast pyrolysis into useful fine chemicals is a promising route to fuel production, however selectivity and conversion are still not optimal. Here, the authors investigate the reaction mechanism by detection of reactive intermediates responsible for the formation of key products.