A Simple Zinc Catalyst for Carbamate Synthesis Directly from CO2

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

Direct Conversion of Low-Concentration CO2 into N-Aryl and N-Alkyl Carbamic Acid Esters Using Tetramethyl Orthosilicate with Amidines as a CO2 Capture Agent and a Catalyst

Herein, we report the direct conversion of low-concentration CO₂ (15 vol %), equivalent to the CO₂ concentration in the exhaust gas from a thermal power station, into carbamic acid esters (CAEs), which are precursors for pharmaceuticals, agrochemicals, and isocyanates. The reaction was performed using Si(OMe)₄ as a nonmetallic regenerable reagent and 1,8-diazabicyclo[5.4.0]undec-7-ene as a CO₂ capture agent and catalyst. This reaction system does not require the addition of metal complex catalysts or metal salt additives and is therefore simpler than our previously reported reaction system involving Ti(OR)₄ and a Zn(II) catalyst. A variety of N-aryl, N-alkyl, and bis CAEs (precursors of polyurethane raw materials) were obtained in moderate to high yields (45-77% for 6 examples, 84-89% for 7 examples). In addition, bis CAEs were successfully synthesized from simulated exhaust gas containing impurities such as SO₂, NO₂, and CO or on a gram scale. We believe that this method can eliminate the use of toxic phosgene as the raw material for isocyanate production and mitigate CO₂ emissions.

Zinc Chloride-Catalyzed Synthesis of Carbamates: An Application for the Synthesis of the Anti-Alzheimer's Drug Rivastigmine

Herein, we report a synthetic protocol for the synthesis of carbamates by employing zinc chloride as a catalyst from carbamoyl chlorides and aromatic/aliphatic alcohols. The developed protocol successfully utilizes the gram-scale synthesis of the FDA-approved rivastigmine drug and its derivative. The utility of zinc chloride over other catalysts such as zinc dust and zinc acetate exhibits a 49-87% yield of carbamates.

Synthesis of organic carbamates as polyurethane raw materials from CO2: the quest for metal alkoxides as regenerable reagents

It is well known that the utilization of carbon dioxide (CO₂) for chemical materials is attracting research attention from the viewpoint of the carbon cycle. To contribute to the reduction of CO₂ emission through such CO₂ utilization reactions and counteract global climate change, the target compounds should be core chemical products that are distributed in large quantities and used for a long time. One such synthetic target is isocyanates that are used as raw materials for the production of polyurethanes, which are versatile polymeric materials with a service life of approximately 10 years. However, since direct synthesis of isocyanate from CO₂ is quite difficult due to equilibrium constraints, a method via the use of its alcohol adduct, organic carbamate, as a precursor has been proposed. In this Perspective, we present regenerative metal alkoxide reactants, such as tin alkoxide, titanium alkoxide, and alkoxysilane, as environmentally benign reactants for the synthesis of organic carbamates from CO₂. We also present a practical and environmentally friendly method for the highly efficient synthesis of various organic carbamates, including industrially important diisocyanate precursors, from 1 atm CO₂ using alkoxysilanes. Furthermore, prospects for the practical application of these carbamate synthesis reactions are also discussed.

Inorganic Salts and Dehydrating Agents Cooperatively Promoted Ru-Catalyzed Ethylene Methoxycarbonylation Using CO2 as a CO Surrogate

The use of CO2 as a CO surrogate for the carbonylation of olefin has attracted considerable attention due to its abundance, readily availability, nontoxicity, and recyclability. In this work, we describe the synthesis of methyl propionate (MPA), a key intermediate for methyl methacrylate in the commercial Lucite Alpha process, by the ruthenium-catalyzed methoxycarbonylation of ethylene with CO2 as a carbonyl source. An efficient approach to producing MPA has been developed by adding metal halide promoters and dehydrating agents. Control experiments suggest that the NHC-Ru-hydride may be the real active species formed in situ by the reaction of Ru3(CO)12 with ionic liquid (IL). NMR data demonstrate that inorganic salts favor the formation of active species, which is an important issue for their promotion effect. In terms of the strategy to overcome chemical equilibrium by the addition of dehydrating agents and IL participation in the formation of NHC-Ru-hydride active species, a tasked IL containing a siloxyl group was employed to Ru-catalyze the methoxycarbonylation of ethylene, which showed higher catalytic efficiency in comparison to IL without a siloxyl group.

From SiO2 to Alkoxysilanes for the Synthesis of Useful Chemicals

The transformation of silica (SiO₂) to useful chemicals is difficult to explore because of the strength of the Si-O bond and thermodynamic stability of the SiO₂ structure. The direct formation of alkoxysilanes from SiO₂ has been explored as an alternative to the carbothermal reduction (1900 °C) of SiO₂ to metallic silicon (Si_met) followed by treatment with alcohols. The base-catalyzed depolymerization of SiO₂ with diols and monoalcohols afforded cyclic silicon alkoxides and tetraalkoxysilanes, respectively. SiO₂ can also be converted to alkoxysilanes in the presence of organic carbonates, such as dimethyl carbonate. Alkoxysilanes can be further converted to useful chemicals, such as carbamates, organic carbonates, and chlorosilanes. An interesting and highly efficient pathway to the direct conversion of SiO₂ to alkoxysilanes has been discussed in detail along with the corresponding economic and environmental implications. The thermodynamic and kinetic aspects of SiO₂ transformations in the presence of alcohols are also discussed.

N-Aryl and N-Alkyl Carbamates from 1 Atmosphere of CO2

We have successfully isolated and characterized the zinc carbamate complex (phen)Zn(OAc)(OC(=O)NHPh) (1; phen=1,10-phenanthroline), formed as an intermediate during the Zn(OAc)₂ /phen-catalyzed synthesis of organic carbamates from CO₂ , amines, and the reusable reactant Si(OMe)₄ . Density functional theory calculations revealed that the direct reaction of 1 with Si(OMe)₄ proceeds via a five-coordinate silicon intermediate, forming organic carbamates. Based on these results, the catalytic system was improved by using Si(OMe)₄ as the reaction solvent and additives like KOMe and KF, which promote the formation of the five-coordinated silicon species. This sustainable and effective method can be used to synthesize various N-aryl and N-alkyl carbamates, including industrially important polyurethane raw materials, starting from CO₂ under atmospheric pressure.

Nickel Nanoparticles Immobilized over Mesoporous SBA-15 for Efficient Carbonylative Coupling Reactions Utilizing CO2: A Spotlight

Ecofriendly routes for the synthesis of carbamates and carbonylative coupling products such as benzyl formate derivatives are very demanding for both academia and industries. Foreseeing a sustainable green future, we systematically analyzed the synthesis history of both these chemicals, mentioning their pros and cons. As a step towards green chemistry, here we have optimized the reaction conditions for the synthesis of various benzyl formates from corresponding benzyl halides and carbamates from substituted anilines and alkyl halides catalyzed by Ni(0) nanoparticles (NPs) immobilized over amine-functionalized ordered mesoporous SBA-15 material in the presence of CO₂ as C1 source. This spotlight on applications is aimed to provide a clear outlook to date regarding the gradual progress in the synthesis of both these aforementioned chemicals and finally addresses further efforts for overcoming the current challenges.

Catalyst-free synthesis of substituted pyridin-2-yl, quinolin-2-yl, and isoquinolin-1-yl carbamates from the corresponding hetaryl ureas and alcohols

A novel catalyst-free synthesis of N-pyridin-2-yl, N-quinolin-2-yl, and N-isoquinolin-1-yl carbamates utilizes easily accessible N-hetaryl ureas and alcohols. The proposed environmentally friendly technique is suitable for the good-to-high yielding synthesis of a wide range of N-pyridin-2-yl or N-quinolin-2-yl substituted carbamates featuring electron-donating and electron-withdrawing groups in the azine rings and containing various primary, secondary, and even tertiary alkyl substituents at the oxygen atom (48-94%; 31 examples). The DFT calculation and experimental study showed that the reaction proceeds through the intermediate formation of hetaryl isocyanates. The method can be applied to obtain N-isoquinolin-1-yl carbamates, although in lower yields, and ethyl benzo[h]quinolin-2-yl carbamate has also been successfully synthesized (68%).

Synthesis of unsymmetrical urea from aryl- or pyridyl carboxamides and aminopyridines using PhI(OAc)2via in situ formation of aryl- or pyridyl isocyanates

The synthesis of unsymmetrical ureas (N-aryl-N′-pyridylurea and N,N′-bipyridylurea) from aryl- or pyridyl carboxamides and aminopyridines in the presence of PhI(OAc)2 has been reported. The formation of pyridylisocyanates from their corresponding carboxamides via Hofmann rearrangement is confirmed.

Transition Metal-Free Synthesis of Carbamates Using CO2 as the Carbon Source

Utilization of carbon dioxide as a C1 synthon is highly attractive for the synthesis of valuable chemicals. However, activation of CO₂ is highly challenging, owing to its thermodynamic stability and kinetic inertness. With this in mind, several strategies have been developed for the generation of carbon-heteroatom bonds. Among these, formation of C-N bonds is highly attractive, especially, when carbamates can be synthesized directly from CO₂ . This Minireview focuses on transition metal-free approaches for the fixation of CO₂ to generate carbamates for the production of fine chemicals and pharmaceuticals. Within the past decade, transition metal-free approaches have gained increasing attention, but traditional reviews have rarely focused on these approaches. Direct comparisons between such methods have been even more scarce. This Minireview seeks to address this discrepancy.

Hydrosilane-Assisted Synthesis of Urea Derivatives from CO2 and Amines

A methodology employing CO₂, amines, and phenylsilane was discussed to access aryl- or alkyl-substituted urea derivatives. This procedure was characterized by adopting hydrosilane to promote the formation of ureas directly, without the need to prepare silylamines in advance. Control reactions suggested that FeCl₃ was a favorable additive for the generation of ureas, and this 1,5,7-triazabicyclo[4.4.0]dec-5-ene-catalyzed reaction might proceed through nucleophilic addition, silicon migration, and the subsequent formal substitution of silylcarbamate.

Zn/Al/Pb Mixed Oxides as Efficient Heterogeneous Catalysts for the Synthesis of Methyl N-Phenyl Carbamate

Dimethyl carbonate aminolysis is an effective and green pathway for the synthesis of methyl N-phenyl carbamate (MPC), which is an important intermediate for the synthesis of polyurethanes and many other chemicals. In this work, we demonstrate the fabrication of Zn/Al/Pb mixed oxides as efficient and stable heterogeneous catalysts for MPC synthesis. The catalysts are prepared via facile coprecipitation and subsequent thermal annealing. Their micromorphology and physical-chemical properties are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning TEM (STEM), X-ray photoelectron spectroscopy (XPS), and NH3-TPD. The results show that rather than being doped into ZnO and/or Al2O3, PbO is highly dispersed in the ZnO/Al2O3 base forming ultrafine nanoparticles. Despite the weak interactions within the mixed oxides, the high density of active sites generates outstanding catalytic activity and cycling stability for MPC synthesis, with an aniline conversion of almost 100% and MPC yield of up to 90% during six repeated tests, providing great potential for their further application.

Carbamation of Starch with Amine Using Dimethyl Carbonate as Coupling Agent

A one-pot coupling of starch with alkyl amine was studied using dimethyl carbonate (DMC) as the coupling agent. Although reaction occurred without a catalyst (24 h, 70 °C), different catalysts, namely, imidazole, tetramethylguanidine, 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), and combinations thereof were investigated to improve the reaction efficiency. When 20 mol % DBU was used as a catalyst, the degree of substitution (DS) could be improved from 0.05 to 0.15 compared to the noncatalyzed reaction. When the amount of DBU was decreased to 5 mol %, catalytical activity remained, albeit with a slightly lower DS (0.09). Temperature did not have a significant effect on the DS but it could be used to alter the solubility of the product. Based on chemical analysis, the alkyl group was attached to starch by the formation of a carbamate group. As the carbonyl carbon in the carbamate originated from DMC, which, in turn, can be produced from carbon dioxide on an industrial scale, the current study provides a conventional way to utilize carbon dioxide-based chemicals in the functionalization of a natural polymer. DMC is also biodegradable and classified as a nonvolatile organic component, making it an environmentally desirable coupling agent.

Carbamate Synthesis Using a Shelf-Stable and Renewable C1 Reactant

4-Propylcatechol carbonate is a shelf-stable, renewable C₁ reactant. It is easily prepared from renewable 4-propylcatechol (derived from wood) and dimethyl carbonate (derived from CO₂ ) using a reactive distillation system. In this work, the 4-propylcatechol carbonate is used for the two-step synthesis of carbamates under mild reaction conditions. In the first step, 4-propylcatechol carbonate is treated with an alcohol at 50-80 °C in the presence of a Lewis acid catalyst, such as Zn(OAc)₂ ⋅2 H₂ O. With liquid alcohols, no solvent is used and with solid alcohols 2-methyltetrahydrofuran is used as solvent. In the second step, the alkyl 2-hydroxy-propylphenyl carbonate intermediates obtained react with amines at room temperature in 2-methyltetrahydrofuran, forming the target carbamates and the byproduct 4-propylcatechol, which can be recycled into a carbonate reactant.

One stone two birds: cobalt-catalyzed in situ generation of isocyanates and benzyl alcohols for the synthesis of N-aryl carbamates

An efficient method for the synthesis of N-aryl carbamates from N-Boc-protected amines has been developed. The cobalt-catalyzed in situ generation of isocyanates from N-Boc-protected amines and benzyl alcohols from benzyl formates has been achieved for the first time, which in turn furnished the corresponding benzyl carbamates in moderate to high yields. The reaction was catalyzed by CoI₂ with tris-(4-dimethylaminophenyl)-phosphine as the ligand and zinc powder as the reductant. The developed reaction conditions were found to be compatible for aromatic amines with both electron-donating and -withdrawing substituents.

Catalytic Conversion of Carbon Dioxide through C-N Bond Formation

From the viewpoint of green chemistry and sustainable development, it is of great significance to synthesize chemicals from CO₂ as C₁ source through C-N bond formation. During the past several decade years, many studies on C-N bond formation reaction were involved, and many efforts have been made on the theory. Nevertheless, several great challenges such as thermodynamic limitation, low catalytic efficiency and selectivity, and high pressure etc. are still suffered. Herein, recent advances are highlighted on the development of catalytic methods for chemical fixation of CO₂ to various chemicals through C-N bond formation. Meanwhile, the catalytic systems (metal and metal-free catalysis), strategies and catalytic mechanism are summarized and discussed in detail. Besides, this review also covers some novel synthetic strategies to urethanes based on amines and CO₂. Finally, the regulatory strategies on functionalization of CO₂ for N-methylation/N-formylation of amines with phenylsilane and heterogeneous catalysis N-methylation of amines with CO₂ and H₂ are emphasized.

Carbon dioxide utilization in the efficient synthesis of carbamates by deep eutectic solvents (DES) as green and attractive solvent/catalyst systems

Deep eutectic solvents as a green solvent/catalyst system for directly synthesizing carbamates from amines, CO₂ and alkyl halides.

Catalytic synthesis of benzimidazoles and organic carbamates using a polymer supported zinc catalyst through CO2 fixation

Zinc metal is attached to the organically modified polystyrene and the obtained catalyst is well characterized. The catalyst is very efficient for the formation of benzimidazoles and organic carbamates through carbon dioxide fixation.

Efficient Conversion of Carbon Dioxide with Si-Based Reducing Agents Catalyzed by Metal Complexes and Salts

Homogeneous metal complex and salt catalysts were developed for the reductive transformation of CO₂ with Si-based reducing agents. Cu-bisphosphine complexes were found to be excellent catalysts for the hydrosilylation of CO₂ with polymethylhydrosiloxane (PMHS). The Cu complexes also showed high catalytic activity and a wide substrate scope for formamide synthesis from amines, CO₂ , and PMHS. Simple fluoride salts such as tetrabutylammonium fluoride acted as good catalysts for the reductive conversion of CO₂ to formic acid in the presence of hydrosilane, disilane, and metallic Si. Based on the kinetics, isotopic experiments, and in-situ NMR measurements, the reaction mechanism for both catalyst systems, the Cu complex and the fluoride salt, have been proposed.

First catalyst-free CO2 trapping of N-acyliminium ions under ambient conditions: sustainable multicomponent synthesis of thia- and oxazolidinyl carbamates

The first trapping of N-acyliminium ions by in situ generated carbaminic acid (product of carbon dioxide (CO2) and amine) is reported. This catalyst-free reaction provides a convenient and feasible approach to prepare N-acyl thia- and oxazolidinyl carbamates with good functional-group compatibility and high efficiency under green conditions. Furthermore, the multicomponent method features a broad substrate scope, facile product diversification, smooth scale-up and notable potential for polymer applications.

Current advances in the catalytic conversion of carbon dioxide by molecular catalysts: an update

Recent advances (2015–) in the catalytic conversion of CO₂ by metal-based and metal-free systems are discussed.