A Co2 P/WC Nano-Heterojunction Covered with N-Doped Carbon as Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction

Polymetal-Chelated Fabrication of Bimetallic Nanophosphides as Electrocatalysts for Zinc-Air Batteries

Bimetallic phosphides are considered as promising electrocatalysts for zinc-air batteries toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). To address the semi-conductor inherent low electronic conductivity and catalytic activity, a polymetal-chelated strategy is employed to in situ fabricate bimetallic nanophosphides within carbon matrix anchoring by chemical bonding. The employment of biomolecule polydopamine (PDA) efficiently anchors various transition metal ions due to its strong chelating capability via inherent functional groups. Furthermore, the chelation of multi-metal ion is proved to promote the formation of graphitic nitrogen. The bimetallic FexCoyP phosphides nanoparticles are intimately encapsulated in carbon matrix through in situ carbonization and phosphatization processes. When utilized in Zinc-air batteries, Fe0.20Co0.80P anchored within N, P co-doped sub-microsphere (Fe0.20Co0.80P /PNC) exhibit a maximum power density of 167 mW cm-2 and cycle life up to 270 cycles, with a round-trip voltage of 0.955 V. The mechanisms for catalytic activity passivation are ascribed to the etching of nitrogen and oxidation of phosphorus in carbon matrix, as well as the oxidation of the surface phosphide on the sub-microspheres. This study presents a promising candidate for advancing the further development of energy conversation catalysis.

Designing core-shell heterostructure arrays based on snowflake NiCoFe-LTH shelled over W2N-WC nanowires as an advanced bi-functional electrocatalyst for boosting alkaline water/seawater electrolysis

The pursuit of efficient and sustainable hydrogen production through water splitting has led to intensive research in the field of electrocatalysis. However, the impediment posed by sluggish reaction kinetics has served as a significant barrier. This challenge has inspired the development of electrocatalysts characterized by high activity, abundance in earth's resources, and long-term stability. In addressing this obstacle, it is imperative to meticulously fine-tune the structure, morphology, and electronic state of electrocatalysts. By systematically manipulating these key parameters, the full potential of electrocatalysts can unleash, enhancing their catalytic activity and overall performance. Hence in this study, a novel heterostructure is designed, showcasing core-shell architectures achieved by covering W2N-WC nanowire arrays with tri-metallic Nickel-Cobalt-Iron layered triple hydroxide nanosheets on carbon felt support (NiCoFe-LTH/W2N-WC/CF). By integrating the different virtue such as binder free electrode design, synergistic effect between different components, core-shell structural advantages, high exposed active sites, high electrical conductivity and heterostructure design, NiCoFe-LTH/W2N-WC/CF demonstrates striking catalytic performances under alkaline conditions. The substantiation of all the mentioned advantages has been validated through electrochemical data in this study. According to these results NiCoFe-LTH/W2N-WC/CF achieves a current density of 10 mA cm-2 needs overpotential values of 101 mV for HER and 206 mV for OER, respectively. Moreover, as a bi-functional electrocatalyst for overall water splitting, a two-electrode device needs a voltage of 1.543 V and 1.569 V to reach a current density of 10 mA cm-2 for alkaline water and alkaline seawater electrolysis, respectively. Briefly, this research with attempting to combination of different factors try to present a promising stride towards advancing bi-functional catalytic activity with tailored architectures for practical green hydrogen production via electrochemical water splitting process.

Polyoxometalate-Structured Materials: Molecular Fundamentals and Electrocatalytic Roles in Energy Conversion

Polyoxometalates (POMs), a kind of molecular metal oxide cluster with unique physical-chemical properties, have made essential contributions to creating efficient and robust electrocatalysts in renewable energy systems. Due to the fundamental advantages of POMs, such as the diversity of molecular structures and large numbers of redox active sites, numerous efforts have been devoted to extending their application areas. Up to now, various strategies of assembling POM molecules into superstructures, supporting POMs on heterogeneous substrates, and POMs-derived metal compounds have been developed for synthesizing electrocatalysts. From a multidisciplinary perspective, the latest advances in creating POM-structured materials with a unique focus on their molecular fundamentals, electrocatalytic roles, and the recent breakthroughs of POMs and POM-derived electrocatalysts, are systematically summarized. Notably, this paper focuses on exposing the current states, essences, and mechanisms of how POM-structured materials influence their electrocatalytic activities and discloses the critical requirements for future developments. The future challenges, objectives, comparisons, and perspectives for creating POM-structured materials are also systematically discussed. It is anticipated that this review will offer a substantial impact on stimulating interdisciplinary efforts for the prosperities and widespread utilizations of POM-structured materials in electrocatalysis.

From atomic bonding to heterointerfaces: Co2P/WC constructed by lacunary polyoxometalates induced strategy as efficient hydrogen evolution electrocatalysts at all pH values

Herein, a novel in-situ "atomic binding to heterointerface" strategy is proposed to obtain Co₂P/WC@NC/CNTs catalyst with abundant heterointerface between cobalt phosphide and tungsten carbide (Co₂P/WC) by the polyoxometalates (POMs)-based metal-organic frameworks (MOFs) precursor. The natural quasi interfaces in K₁₀[Co₄(H₂O)₂(PW₉O₃₄)₂] molecule crucially guide the abundant Co₂P/WC heterointerfaces down to atomic level. Meanwhile, MOFs cages can effectively encapsulate nanosized POMs at molecular level to control the size and dispersion of Co₂P/WC nanoparticle, while carbon nanotubes (CNTs) enhance conductivity at nanoscale level. The interfacial electronic modulation between Co₂P and WC lowering the energy barrier of the rate determining step, thus Co₂P/WC@NC/CNTs showed reasonable hydrogen evolution reaction (HER) activity and stability in all-pH media including sea water. This work provides a "bottom-up" synthetic strategy for confined heterostructures, thus offering the prospect for more efficient interfacial charge modulation.

Co2P-Assisted Atomic Co-N4 Active Sites with a Tailored Electronic Structure Enabling Efficient ORR/OER for Rechargeable Zn-Air Batteries

Oxygen reduction and evolution reactions (ORR and OER, respectively) are vital steps for metal-air batteries, which are plagued by their sluggish kinetics. It is still a challenge to develop highly effective and low-cost non-noble-metal-based electrocatalysts. Herein, a simple and reliable method was reported to synthesize a Co2P-assisted Co single-atom (Co-N4 centers) electrocatalyst (Co2P/Co-NC) via evaporative drying and pyrolysis processes. The Co2P nanoparticles and Co-N4 centers are uniformly distributed on the nitrogen-doped carbon matrix. Notably, Co2P/Co-NC showed excellent activities in both ORR (initial potential, 1.01 V; half-wave potential, 0.88 V) and OER (overpotential, 369 mV at 10 mA cm-2). The above results were comparable to those of commercial catalysts (such as Pt/C and RuO2). Based on the experimental and theoretical analyses, the impressive activity can be ascribed to the tailored electronic structure of Co-N4 centers by the adjacent Co2P, enabling the electron transfer from the Co atom to the neighboring C atoms, leading to a downshift of the d-band center, and improved reaction kinetics were achieved. The assembled Zn-air batteries using Co2P/Co-NC as the air cathode showed a peak power density of 187 mW cm-2 and long-life cycling stability for 140 h at 5 mA cm-2. This work may pave a promising avenue to design hybrid bifunctional electrocatalysts for highly efficient ORR/OER.

Construction of three-dimensional cobalt sulfide/multi-heteroatom co-doped porous carbon as an efficient trifunctional electrocatalyst

Exploring cost-effective non-precious metal electrocatalysts is vital for the large-scale application of clean energy conversion devices (i.e., fuel cells, metal-air batteries and water electrolysers). Herein, we present the construction of a three-dimensional cobalt sulfide/multi-heteroatom co-doped carbon composite as a trifunctional electrocatalyst for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) through one-step sulfidation of zeolitic-imidazolate frameworks (ZIFs) using sulfur powder as a sulfur source. By virtue of the distinct periodic metal-nitrogen coordination structure and the abundant micropores within the ZIF precursor, sub-10 nm Co₉S₈ nanoparticles (NPs) are homogenously anchored on a Co, S and N multi-heteroatom co-doped carbon framework with a large specific surface area that exposes sufficient reactive sites for these electrocatalytic reactions. The optimized Co₉S₈/CoNSC exhibits outstanding ORR, OER and HER performance, comparable or even superior to those of commercial Pt/C and RuO₂. The small Co₉S₈ NPs and Co-N_x species embedded in the carbon matrix cooperatively catalyze the OER and ORR, while the HER catalysis is mainly contributed by Co₉S₈ NPs. Furthermore, the Co₉S₈/CoNSC shows outstanding anti-poisoning capability towards sulfur species during ORR catalysis with no obvious activity degradation observed in 0.1 M KOH containing 50 μM SO₃^2- species, significantly outperforming commercial Pt/C. The assembled rechargeable Zn-air battery using the Co₉S₈/CoNSC as a cathode shows a high power density (150 mW cm^-2) and the assembled water electrolyzer only requires 1.585 V at a current density of 10 mA cm^-2 when using this material as an anode and a cathode. This work provides an effective strategy to design and synthesize efficient, durable and anti-poisoning cobalt chalcogenide-based trifunctional electrocatalysts for the large-scale application of clean energy conversion devices.

Bifunctional WC-Supported RuO2 Nanoparticles for Robust Water Splitting in Acidic Media

We report the strong catalyst-support interaction in WC-supported RuO₂ nanoparticles (RuO₂ -WC NPs) anchored on carbon nanosheets with low loading of Ru (4.11 wt.%), which significantly promotes the oxygen evolution reaction activity with a η₁₀ of 347 mV and a mass activity of 1430 A g_Ru ^-1 , eight-fold higher than that of commercial RuO₂ (176 A g_Ru ^-1 ). Theoretical calculations demonstrate that the strong catalyst-support interaction between RuO₂ and the WC support could optimize the surrounding electronic structure of Ru sites to reduce the reaction barrier. Considering the likewise excellent catalytic ability for hydrogen production, an acidic overall water splitting (OWS) electrolyzer with a good stability constructed by bifunctional RuO₂ -WC NPs only requires a cell voltage of 1.66 V to afford 10 mA cm^-2 . The unique 0D/2D nanoarchitectures rationally combining a WC support with precious metal oxides provides a promising strategy to tradeoff the high catalytic activity and low cost for acidic OWS applications.

Robust Porous WC-Based Self-Supported Ceramic Electrodes for High Current Density Hydrogen Evolution Reaction

Developing an economical, durable, and efficient electrode that performs well at high current densities and is capable of satisfying large-scale electrochemical hydrogen production is highly demanded. A self-supported electrocatalytic "Pt-like" WC porous electrode with open finger-like holes is produced through industrial processes, and a tightly bonded nitrogen-doped WC/W (WC-N/W) heterostructure is formed in situ on the WC grains. The obtained WC-N/W electrode manifests excellent durability and stability under multi-step current density in the range of 30-1000 mA cm-2 for more than 220 h in both acidic and alkaline media. Although WC is three orders of magnitude cheaper than Pt, the produced electrode demonstrates comparable hydrogen evolution reaction performance to the Pt electrode at high current density. Density functional theory calculations attribute its superior performance to the electrode structure and the modulated electronic structure at the WC-N/W interface.

Manganese Oxide/Iron Carbide Encapsulated in Nitrogen and Boron Codoped Carbon Nanowire Networks as Accelerated Alkaline Hydrogen Evolution and Oxygen Reduction Bifunctional Electrocatalysts

Along with the widespread applications of various energy storage and conversion devices, the prices of precious metal platinum (Pt) and transition-metal cobalt/nickel keep continuously growing. In the future, designing high-efficiency nonprecious-metal catalysts based on low-cost iron (Fe) and manganese (Mn) metals for hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) is fairly critical for commercial applications of hydrogen fuel cells. In this study, for the first time, we design novel three-dimensional (3D) hybrid networks consisting of manganese oxide (MnO)-modified, iron carbide (Fe₃C)-embedded, and boron (B)/nitrogen (N) codoped hierarchically porous carbon nanofibers (denoted FeMn@BNPCFs). After optimizing the pyrolysis temperatures, the optimal FeMn@BNPCFs-900 catalyst displays the best HER and ORR catalytic activities in an alkaline solution. As expected, the HER onset potential (E_onset) and the potential at a current density of -10 mA cm^-2 for FeMn@BNPCFs-900 in 1.0 M KOH are just 36 and 194 mV more negative than the state-of-the-art 20 wt % Pt/C catalyst with more superior stability. In particular, the FeMn@BNPCFs-900 catalyst shows excellent ORR catalytic activity with a more positive E_onset (0.946 V vs RHE), a more positive half-wave potential (E_1/2 = 0.868 V vs RHE), better long-term stability, and higher methanol tolerance surpassing the commercial 20 wt % Pt/C (E_onset = 0.943 V vs RHE, E_1/2 = 0.854 V vs RHE) and most previously reported precious-metal-free catalysts in 0.1 M KOH. The synergistic effects of 3D hierarchically macro-/mesoporous architectures, advanced charge transport capacity, abundant carbon defects/edges, abundant B (2.3 atom %) and N (4.9 atom %) dopants, uniformly dispersed Fe₃C@BNC NPs, and MnO nanocrystallines are responsible for the excellent HER/ORR catalytic activities of the FeMn@BNPCFs-900 catalyst.

Self-assembly of bimetallic polyoxometalates and dicyandiamide to form Co/WC@NC for efficient electrochemical hydrogen generation

Graphene carbon-coated and N-doped WC and cobalt (Co) nanoparticles (Co/WC@NC) were synthesized via a one-step straightforward high-temperature calcination. The resultant Co/WC@NC manifests excellent hydrogen evolution activity.

Construction of an N-Decorated Carbon-Encapsulated W2C/WP Heterostructure as an Efficient Electrocatalyst for Hydrogen Evolution in Both Alkaline and Acidic Media

Tungsten carbide (W₂C) has emerged as a potential alternative to noble-metal catalysts toward hydrogen evolution reaction (HER) owing to its Pt-like electronic configuration. However, unsatisfactory activity, dilatory electron transfer, and inefficient synthesizing methods, especially for nanoscale particles, have severely hindered its large-scale applications. Herein, a novel heterostructure composed of W₂C and tungsten phosphide (WP) embedded in nitrogen-decorated carbon (W₂C/WP@NC) was constructed as an efficient HER electrocatalyst. The as-prepared W₂C/WP@NC catalyst exhibits remarkable electrocatalytic activity and robust durability toward HER both in acids and bases. More notably, the W₂C/WP@NC catalyst demonstrates low overpotentials of 116.37 and 196.2 mV to afford a current density of 10 mA cm^-2 and reveals slight potential decays of about 6.4 and 7.64% over 12 h continuous operation in bases and acids, respectively. The overall water-splitting performance was further evaluated using the W₂C/WP@NC catalyst as the cathode and commercial RuO₂ as the anode in an electrolyzer, which can realize an overall current density of 10 mA cm^-2 and maintain long durability of more than 12 h with a small cell voltage of 1.723 V. This work opens up new opportunities for exploring cost-efficient electrocatalysts in sustainable energy conversion.

Ultrafine Co6W6C as an efficient anode catalyst for direct hydrazine fuel cells

Ultrafine ternary carbide Co₆W₆C@C nanoparticles (NPs) were successfully synthesized and these NPs exhibited high catalytic activities for the hydrazine oxidation reaction (HzOR) under alkaline conditions. In a practical O₂-hydrazine fuel cell test, its peak power density reached 203 mW cm^-2, a value superior to that of the state-of-the-art commercial Pt/C catalyst.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Controllable Heteroatom Doping Effects of CrxCo2-xP Nanoparticles: a Robust Electrocatalyst for Overall Water Splitting in Alkaline Solutions

The effect of doping Cr on the electrocatalytic activity of Co₂P supported on carbon black (Cr_xCo_2-xP/CB) for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline solution was investigated. A beneficial improvement in the performance of Co₂P toward HER and OER was discovered. For the HER at -200 mV overpotential, the turnover frequency (TOF) increases almost 6-fold from 0.26 to 1.52 electron site_Co^-1 s^-1 when Co₂P/CB has a small amount of Cr added to form Cr_0.2Co_1.8P/CB. Similarly, we estimate an increase from 0.205 to 0.585 electron site_Co^-1 s^-1 for the OER at 1.6 V for the same change in composition. With 10 atom % Cr doping, the Cr_0.2Co_1.8P/CB catalyst needed 226 mV overpotential to produce a cathodic current density of -100 A g_Co^-1 and 380 mV overpotential to produce an anodic current density of 100 A g_Co^-1. Based on both experimental results and theoretical calculations, the activity improvement results from optimization of the electronic properties of Co₂P after Cr doping.

Hollow Porous MnFe2 O4 Sphere Grown on Elm-Money-Derived Biochar towards Energy-Saving Full Water Electrolysis

The development of inexpensive and efficient bifunctional electrocatalysts is significant for widespread practical applications of overall water splitting technology. Herein, a one-pot solvothermal method is used to prepare hollow porous MnFe₂ O₄ spheres, which are grown on natural-abundant elm-money-derived biochar material to construct MnFe₂ O₄ /BC composite. When the overpotential is 156 mV for both the oxygen evolution reaction and the hydrogen evolution reaction, the current density reaches up to 10 mA cm^-2 , and its duration is 10 h. At 1.51 V, the overall water decomposition current density of 10 mA cm^-2 can be obtained in 1 m KOH. This work proves that elm-money-derived biochar is a valid substrate for growing hollow porous spheres. MnFe₂ O₄ /BC give a promising general strategy for preparing the effective and stable bifunctional catalysis that can be expand to multiple transition metal oxide.

Preparation of Robust Hydrogen Evolution Reaction Electrocatalyst WC/C by Molten Salt

Tungsten carbide (WC) is an alternative to the costly and resource-constrained Pt-based catalysts for hydrogen evolution reaction (HER). In this work, a one-step facile and easily scalable approach is reported, to synthesize ultrafine WC by molten salt. Benefiting from the ideal synergistic catalytic effect between the highly active WC nanoparticles and the conductive graphitic carbon, and strong charge transfer ability, the unique WC/C hybrids demonstrated excellent HER performance in both acid and alkaline medias with overpotentials of 112 and 122 mV, at a current density of 10 mA cm⁻² and Tafel slopes of 54.4 and 68.8 mV dec⁻¹, in acid and alkaline media, and remarkable stability. With the simplicity and low-cost of the synthetic approach, the strategy presented here can be extendable to the preparation of other transition metal-based/carbon hybrids for versatile applications.

N- & S-co-doped carbon nanofiber network embedded with ultrafine NiCo nanoalloy for efficient oxygen electrocatalysis and Zn-air batteries

A novel 3D N- & S-co-doped carbon nanofiber network embedded with ultrafine NiCo oxide nanoparticles is explored by a facile surfactant-assisted electrospinning method. This catalyst has several structural advantages including ultrafine active sites (2-8 nm), hierarchical pores, and abundant defects, allowing for much higher OER/ORR activity compared to commercial IrO2 and Pt/C catalysts. The potential gap (ΔE) of OER and ORR metrics for NSCFs/Ni-Co-NiCo2O is 0.69 V and the Zn-air battery equipped with NSCFs/Ni-Co-NiCo2O as the air cathode delivers a maximum power density of 171.24 mW cm-2 at 268 mA cm-2. Furthermore, the unique structure of the 3D carbon nanofiber network embedded with ultrafine nanoparticles results in superior stability with negligible degradation in activity after 380 h of continuous operation.

Engineering polyoxometalate-intercalated layered double hydroxides for catalytic applications

Polyoxometalate-intercalated layered double hydroxide (POM-LDH) nanocomposites have received considerable attention in recent years because such nanocomposites not only inherit the intrinsic properties of POMs and LDHs but also exert significant synergistic effects during the catalytic process. In this frontier article, we present the latest advances on the POM-LDH nanocomposites ranging from new synthetic methods to catalytic applications. By making use of the host layer modification method and exfoliation assembly method, the as-prepared POM-LDH nanocomposites show a wide range of catalytic applications. The challenges and future opportunities are also discussed by highlighting some creative work on related POM- or LDH-based materials.

Interfacial Engineering of W2 N/WC Heterostructures Derived from Solid-State Synthesis: A Highly Efficient Trifunctional Electrocatalyst for ORR, OER, and HER

To meet the practical demand of overall water splitting and regenerative metal-air batteries, highly efficient, low-cost, and durable electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are required to displace noble metal catalysts. In this work, a facile solid-state synthesis strategy is developed to construct the interfacial engineering of W₂ N/WC heterostructures, in which abundant interfaces are formed. Under high temperature (800 °C), volatile CN_x species from dicyanodiamide are trapped by WO₃ nanorods, followed by simultaneous nitridation and carbonization, to form W₂ N/WC heterostructure catalysts. The resultant W₂ N/WC heterostructure catalysts exhibit an efficient and stable electrocatalytic performance toward the ORR, OER, and HER, including a half-wave potential of 0.81 V (ORR) and a low overpotential at 10 mA cm^-2 for the OER (320 mV) and HER (148.5 mV). Furthermore, a W₂ N/WC-based Zn-air battery shows outstanding high power density (172 mW cm^-2 ). Density functional theory and X-ray absorption fine structure analysis computations reveal that W₂ N/WC interfaces synergistically facilitate transport and separation of charge, thus accelerating the electrochemical ORR, OER, and HER. This work paves a novel avenue for constructing efficient and low-cost electrocatalysts for electrochemical energy devices.

Tungsten Carbide Encapsulated in Grape-Like N-Doped Carbon Nanospheres: One-Step Facile Synthesis for Low-Cost and Highly Active Electrocatalysts in Proton Exchange Membrane Water Electrolyzers

Tungsten carbide (WC) is an alternative to the costly and resource-constrained Pt-based catalysts. Herein, a one-step facile and easily scalable approach is reported to synthesize ultrafine WC nanocrystals encapsulated in porous N-doped carbon nanospheres (NC) by simple self-polymerization, drying, and annealing. It is worth mentioning that this developed method has four novel features: (1) the synthesis process, without any hard template or hydrocarbon gas feeding, is, notably, very facile and efficient with low cost; (2) the carbon coating on WC nanocrystals not only restrains coarsening of particles but also creates strong coupling interactions between the nanocrystallines and the conductive carbonaceous matrix; (3) uniform grape-like WC@NC nanospheres with high specific surface area can be obtained in a large scale; and (4) single-phase WC can be achieved. As a result, WC@NC demonstrates remarkable hydrogen evolution reaction (HER) electrocatalytic performance with overpotentials of 127 and 141 mV at a current density of 10 mA cm^-2 and Tafel slopes of 56.3 and 78.7 mV dec^-1 in acid and alkaline media, respectively. Our density functional theory calculations manifest that the strong synergistic electronic effect between WC and its intimately bonded carbon shell vastly boosts the HER electrocatalytic activity. WC@NC catalysts as a cathode are further tested in a home-made electrolyzer with 0.78 A cm^-2 achieved at a cell voltage of 2 V at 80 °C and operated stably at 200 mA cm^-2 for more than 20 h.

CZTS Decorated on Graphene Oxide as an Efficient Electrocatalyst for High-Performance Hydrogen Evolution Reaction

Cu2ZnSnS4 (CZTS) was synthesized by the sonochemical method using 2-methoxyethanol as the solvent and subsequently decorated onto graphene oxide (GO synthesized by the modified Hummers' method) using two different approaches such as in situ growth and ex situ synthesis followed by deposition. Preliminary characterizations indicated that the synthesized CZTS belongs to the kesterite structure with a sphere-like morphology. The in situ-synthesized CZTS/GO (I-CZTS/GO) composite is used as an efficient electrocatalyst for hydrogen evolution reaction (HER) which revealed superior electrocatalytic activity with a reduced overpotential (39.3 mV at 2 mA cm-2), Tafel slope (70 mV dec-1), a larger exchange current density of 908 mA cm-2, and charge transfer resistance (5 Ω), significantly different from pure CZTS. Besides, the I-CZTS/GO composite exhibits highest HER performance with high current stability of which shows no noticeable degradation after i-t amperometry. The catalytic activity demonstrates that the I-CZTS/GO composite could be a promising electrocatalyst in hydrogen production from their cooperative interactions.

Wafer-Scale van der Waals Heterostructures with Ultraclean Interfaces via the Aid of Viscoelastic Polymer

Two-dimensional (2D) van der Waals (vdW) heterostructures exhibit novel physical and chemical properties, allowing the development of unprecedented electronic, optical, and electrochemical devices. However, the construction of wafer-scale vdW heterostructures for practical applications is still limited due to the lack of well-established growth and transfer techniques. Herein, we report a method for the fabrication of wafer-scale 2D vdW heterostructures with an ultraclean interface between layers via the aid of a freestanding viscoelastic polymer support layer (VEPSL). The low glass transition temperature ( T_g) and viscoelastic nature of the VEPSL ensure absolute conformal contact between 2D layers, enabling the easy pick-up of layers and attaching to other 2D layers. This eventually leads to the construction of random sequence 2D vdW heterostructures such as molybdenum disulfide/tungsten disulfide/molybdenum diselenide/tungsten diselenide/hexagonal boron nitride. Furthermore, the VEPSL allows the conformal transfer of 2D vdW heterostructures onto arbitrary substrates, irrespective of surface roughness. To demonstrate the significance of the ultraclean interface, the fabricated molybdenum disulfide/graphene heterostructure employed as an electrocatalyst yielded excellent results of 73.1 mV·dec^-1 for the Tafel slope and 0.12 kΩ of charge transfer resistance, which are almost twice as low as that of the impurity-trapped heterostructure.

Structural Design and Electronic Modulation of Transition-Metal-Carbide Electrocatalysts toward Efficient Hydrogen Evolution

As the key of hydrogen economy, electrocatalytic hydrogen evolution reactions (HERs) depend on the availability of cost-efficient electrocatalysts. Over the past years, there is a rapid rise in noble-metal-free electrocatalysts. Among them, transition metal carbides (TMCs) are highlighted due to their structural and electronic merits, e.g., high conductivity, metallic band states, tunable surface/bulk architectures, etc. Herein, representative efforts and progress made on TMCs are comprehensively reviewed, focusing on the noble-metal-like electronic configuration and the relevant structural/electronic modulation. Briefly, specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics. Finally, a perspective on the future development of TMC electrocatalysts is offered. The overall aim is to shed some light on the exploration of emerging materials in energy chemistry.

A surface carbonization strategy towards MoS2 microspheres with enhanced electrochemical hydrogen evolution activity

Decorating N-doped carbon nanoparticles on MoS₂via a surface carbonization strategy to boost electrocatalytic hydrogen generation.

Co2P Nanoparticles Wrapped in Amorphous Porous Carbon as an Efficient and Stable Catalyst for Water Oxidation

Exploring highly active, enduringly stable, and low-cost oxygen evolution reaction catalysts continues to be a dominant challenge to commercialize renewable electrochemical water-splitting technology. High-active and earth-abundant cobalt phosphides are recently considered as promising candidates. However, the poor inherent electron transfer efficiency and instability hinder its further development. In this work, a novel approach was demonstrated to effectively synthesize Co₂P nanoparticles wrapped in amorphous porous carbon framework (Co₂P/C). Benefiting from extremely high specific surface area of porous carbon, plenty of active sites were adequately exposed. Meanwhile, unique anchoring structure between Co₂P nanoparticles and amorphous carbon outerwear insured high charge transfer efficiency and superior stability of Co₂P/C. Due to these favorable properties, low overpotential of 281 mV at 10 mA cm⁻² and Tafel slope of 69 mV dec⁻¹ were achieved in resultant Co₂P/C catalyst. More significantly, it only exhibited a negligible overpotential increase after 30 h stability test, and these performances entirely preceded commercial RuO₂ benchmark. In summary, we proposed a simple and feasible strategy to prepare metal phosphides wrapped with amorphous porous carbon outerwear for efficient and durable electrochemical water oxidation.

Supramolecular gel assisted synthesis of Co2P nanosheets as an efficient and stable catalyst for oxygen reduction reaction

Co₂P/C, with nanosheet morphology, is prepared through a facile supramolecular-gel assisted strategy which presents excellent electrocatalytic performance for ORR.