Low-Cost Porous Ruthenium Layer Deposited on Nickel Foam as a Highly Active Universal-pH Electrocatalyst for the Hydrogen Evolution Reaction

Efficient Electrochemical Methods for Low-Loading Ru Deposition on Carbon Electrodes as a Hydrogen Evolution Reaction Catalyst in an Acidic Environment

The widespread development of technologies for green hydrogen production strictly relies on the availability of durable electrocatalysts that can operate in either acidic or alkaline electrolytes while using a limited amount of platinum group metals. In this work, we present an effective strategy based on electrodeposition as a low-cost method to obtain low-loading Ru catalysts on carbon electrodes for the hydrogen evolution reaction in an acidic environment. The deposition conditions have been investigated and optimized in order to have uniform coverage, a large number of active sites, and good electrocatalytic performance. The morphology and chemical structure have been investigated using scanning electron microscopy and X-ray photoelectron spectroscopy measurements. Excellent catalytic activity has been achieved with a Ru loading of 0.06 mg cm-2, obtaining an overpotential of 67 mV at 10 mA cm-2 and a Tafel slope of 50 mV dec-1.

RuCo@C Hollow Nanoprisms Derived from ZIF-67 for Enhanced Hydrogen and Oxygen Evolution Reactions

Zeolitic imidazolate frameworks (ZIFs) are commonly used to create complex hollow structures for energy applications. This study presents a simple method to produce a novel hollow nanoprism Co@C hierarchical composite from ZIF-67 through high-temperature treatment at 800 °C. This composite serves as a platform for Ru nanoparticle deposition, forming RuCo@C hollow nanoprism (RuCo@C HNP). As an electrocatalyst in 1 M KOH, RuCo@C HNP exhibits excellent hydrogen evolution reaction (HER) performance, with a low overpotential of 32 mV to reach 10 mA cm-2, a Tafel slope of 39.67 mV dec-1, a high turnover frequency (TOF) of 3.83 s-1 at η200, and stable performance over 50 h. It also achieves a low η10 of 266 mV for the oxygen evolution reaction (OER) with a Tafel slope of 45.22 mV dec-1. Density functional theory (DFT) calculations reveal that Ru doping in Ni/Co maintains a low water dissociation barrier, reduces the energy barrier for the OER rate-determining step, and creates active sites for H*, enhancing adsorption/desorption abilities. These results are attributed to the synergy between Co and Ru and the hollow prism structure's increased surface area. This method for synthesizing hollow structures using ZIF composites shows promise for applications in the energy sector.

Designing Ru-B-Cr Moieties to Activate the Ru Site for Acidic Water Electrolysis under Industrial-Level Current Density

Developing highly efficient non-iridium-based active sites for acidic water splitting is still a huge challenge. Herein, unique Ru-B-Cr moieties have been constructed in RuO2 nanofibers (NFs) to activate Ru sites for water electrolysis, which overcomes the bottleneck of RuO2-based catalysts usually possessing low activity for the hydrogen evolution reaction (HER) and poor stability for the oxygen evolution reaction (OER). The fabricated Cr, B-doped RuO2 NFs exhibit low overpotentials of 205 and 379 mV for acidic HER and OER at 1 A cm-2 with outstanding stability lasting 1000 and 188 h, respectively. The assembled acidic electrolyzer also possesses great hydrogen production efficiency and durability at a high current density. Experimental and theoretical explorations reveal that the formation of Ru-B-Cr moieties effectively optimizes the atomic configurations and modulates the adsorption/desorption free energy of reaction intermediates to achieve exceptional HER and OER performance.

An Infrequent 1D Manganese-Tin Selenide with Bifunctional Catalytic Properties

The optoelectronic, electrocatalytic, and photocatalytic properties of new tin selenides are of great significance for various energy applications. Herein, a facile solvothermal reaction of Sn, Se, and MnCl2 in 1,3-propodiamine (1,3-dap) solution at 150 °C for 7 days was used to achieve a new type of one-dimensional (1D) organic hybrid manganese-tin selenide [Mn2(1,3-dap)4(μ-1,3-dap)Sn2Se6]n (MnSnSe-1), whose 1D framework is built up from the linkage of rare unsaturated binuclear [Mn2(1,3-dap)4(μ-1,3-dap)]2+ cations and dimeric [Sn2Se6]4- anions. The combination of MnSnSe-1 and Ni nanoparticle is first applied for the preparation of a Ni/MnSnSe-1/NF electrode (NF = porous Ni foam) as the efficient electrocatalyst for the hydrogen evolution reaction (HER), indicating excellent HER electrocatalytic property with an overpotential of 117 mV at 10 mA·cm-2 in a neutral medium. Owing to its narrow absorption edge of 1.65 eV, implying prominent harvesting ability in the visible-light region, MnSnSe-1 shows a remarkable photocurrent response and excellent visible-light-driven photocatalytic property for the degradation of methylene blue in aqueous solution.

Direct Electroplating Ruthenium Precursor on the Surface Oxidized Nickel Foam for Efficient and Stable Bifunctional Alkaline Water Electrolysis

Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of Ru─O─Ni bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm-2 (OER: 410 mV; HER: 240 mV), surpassing commercial RuO2 (OER: 600 mV) and Pt/C based performance (HER: 265 mV).

Energy storage and catalytic behaviour of cmWave assisted BZT and flexible electrospun BZT fibers for energy harvesting applications

High-performance lead-free Barium Zirconium Titanate (BZT) based ceramics have emerged as a potential candidate for applications in energy storage, catalysis for electro chemical energy conversion and energy harvesting devices as presented in this work. In the present study hybrid microwave sintered BZT are studied for dielectric, ferroelectric and phase transition properties. BZT ceramic exhibits tetragonal structure as confirmed by the Retvield refinement studies. XPS studies confirms the elemental composition of BZT and presence of Zr. Polarization versus electric field hysteresis loops confirms the ferroelectric behaviour of BZT ceramic. Encouragingly, the BZT showed a moderate energy storage efficiency of 30.7 % and relatively good electro chemical energy conversion (HER). Excellent catalytic activity observed for BZT electrode in acid medium with low Tafel slope 77 mV dec-1. Furthermore, electrospun nanofibers made of PVDF-HFP and BZT are used to make flexible piezoelectric nano generators (PENGs). FTIR studies show that the 16 wt% BZT composite ink exhibits a higher electroactive beta phase. The optimized open-circuit voltage and short circuit current of the flexible PENG exhibits 7Vpp and 750 nA under an applied force of 3N. Thus, flexible and self-powered BZT PENGs are alternative source of energy due to its reliability, affordability and environmental-friendly nature.

One-Dimensional Selenidostannates Based on an Infrequent Tetrameric Cluster [Sn4Se12] Exhibiting Electro-Catalytic Properties

The discovery of low-cost and efficient electro-catalytic materials for hydrogen evolution reaction (HER) is very desirable in hydrogen energy technology. Here, a new type of one-dimensional (1-D) organic hybrid selenidostannate [Ni(en)₃]_n[Sn₂Se₅]_n (SnSe-1, en = ethylenediamine) with an in situ [Ni(en)₃]²⁺ complex was achieved by the solvothermal reaction of Sn, Se, and NiCl₂·6H₂O in a mixed solvent of en and triethanolamine at 160 °C for 10 days. The crystal structure of SnSe-1 contains a unique 1-D [Sn₂Se₅^2-]_n chain built up from the sharing-edge connection of a hitherto-unknown tetrameric [Sn₄Se₁₂] cluster, which is separated by discrete [Ni(en)₃]²⁺ complexes. SnSe-1 is first combined with Ni nanoparticles supported on conductive porous Ni foam (NF) to constitute a Ni/SnSe-1/NF electrode as the HER electro-catalyst, displaying superior electro-catalytic activity in near-neutral conditions.

Inner Co Synergizing Outer Ru Supported on Carbon Nanotubes for Efficient pH-Universal Hydrogen Evolution Catalysis

Exploring highly active but inexpensive electrocatalysts for the hydrogen evolution reaction (HER) is of critical importance for hydrogen production from electrochemical water splitting. Herein, we report a multicomponent catalyst with exceptional activity and durability for HER, in which cobalt nanoparticles were in-situ confined inside bamboo-like carbon nanotubes (CNTs) while ultralow ruthenium loading (~ 2.6 µg per electrode area ~ cm^-2) is uniformly deposited on their exterior walls (Co@CNTsǀRu). The atomic-scale structural investigations and theoretical calculations indicate that the confined inner Co and loaded outer Ru would induce charge redistribution and a synergistic electron coupling, not only optimizing the adsorption energy of H intermediates (ΔG_H*) but also facilitating the electron/mass transfer. The as-developed Co@CNTsǀRu composite catalyst requires overpotentials of only 10, 32, and 63 mV to afford a current density of 10 mA cm^-2 in alkaline, acidic and neutral media, respectively, representing top-level catalytic activity among all reported HER catalysts. The current work may open a new insight into the rational design of carbon-supported metal catalysts for practical applications.

Nitrogen Disturbance Awakening the Intrinsic Activity of Nickel Phosphide for Boosted Hydrogen Evolution Reaction

Nickel phosphide (Ni₂ P) has emerged as a promising candidate to substitute Pt-based catalysts for hydrogen evolution reaction (HER) due to the hydrogenase-like catalytic mechanism and concomitantly low cost. However, its catalytic activity is still not comparable to that of noble-metal-based catalysts, and innovative strategies are still urgently needed to further improve its performance. Herein, a self-supported N-doped Ni₂ P on Ni foam (N-Ni₂ P/NF) was rationally designed and fabricated through a facile NH₄ H₂ PO₂ -assisted gas-solid reaction process. As an HER catalyst in alkaline medium, the obtained N-Ni₂ P/NF revealed excellent electrocatalytic performance with a distinctly low overpotential of 50 mV at 10 mA cm^-2 , a small Tafel slope of 45 mV dec^-1 , and long-term stability for 25 h. In addition, the spectroscopic characterizations and density functional theory calculations confirmed that the incorporation of N regulated the original electronic structure of Ni₂ P, enhanced its intrinsic catalytic property, optimized the Gibbs free energy of reaction intermediates, and ultimately promoted the HER process. This work provides an atomic-level insight into the electronic structure modulation of metal phosphides and opens an avenue for developing advanced transition metal phosphides-based catalysts.

Low-Pressure Plasma-Processed Ruthenium/Nickel Foam Electrocatalysts for Hydrogen Evolution Reaction

In this paper, low-pressure 95%Ar-5%H2, pure Ar, and 95%Ar-5%O2 plasmas were used for post-treatment of ruthenium (Ru) deposited on nickel foam (NF) (Ru/NF). Ru/NF was then tested as a catalyst for a hydrogen evolution reaction. Significant improvement in electrocatalytic activity with the lowest overpotential and Tafel slope was observed in an alkaline electrolyte (1 M KOH) with 95%Ar-5%O2 plasma processing on Ru/NF. Linear scanning electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV) also indicate the lowest interfacial impedance and largest electrical double layer capacitance. Experimental results with 0.1 M phosphate buffered saline (PBS) and 0.5 M H2SO4 electrolytes were also demonstrated and compared.

Potentiostatic electrodeposition of Ni-Se-Cu on nickel foam as an electrocatalyst for hydrogen evolution reaction

Development of cost-effective and efficient earth-abundant catalysts for hydrogen evolution reaction (HER) is a great challenge. In this study, by one-step potentiostatic electrodeposition, the Ni-Se-Cu electrocatalyst on nickel foam was fabricated as a binder-free HER electrocatalyst. As compared with Ni-Se electrocatalysts, such fabricated Ni-Se-Cu electrocatalyst exhibited prominent electrocatalytic activity to the HER in alkaline electrolyte. This Ni-Se-Cu electrocatalyst exhibits a small overpotential of 136 mV to achieve a current density of 10 mA·cm^-2 and high electrochemical stability. The remarkable HER properties of Ni-Se-Cu electrocatalyst mainly originate from high electronic conductivity induced by Cu-doping. This work shows a cheap and simple avenue to develop high efficient non-noble electrochemical electrocatalysts for HER.

Interface Engineering with Ultralow Ruthenium Loading for Efficient Water Splitting

Developing high-performance and cost-effective bifunctional electrocatalysts for water splitting is the key to large-scale hydrogen production. How to achieve higher performance with a lower amount of noble metal is still a major challenge. Herein, using a facile wet-chemistry strategy, we report the ultralow amount loading of ruthenium (Ru) on porous nickel foam (NF) as a highly efficient bifunctional electrocatalyst for water splitting. Theoretical simulations reveal that the coupling effect of Ru and Ni can significantly reduce the d-band center of the composite. The Ru-modified NF exhibits a very high level of HER activity with only 0.3 wt% of Ru, far surpassing commercial Pt/C. It only requires an extremely low overpotential (η₁₀) of 10 mV to achieve a current density of 10 mA cm^-2 in alkaline solution and a quite low Tafel slope of 34 mV dec^-1. This catalyst also shows remarkable performance for overall water splitting with a low voltage of 1.56 V at 10 mA cm^-2. These findings indicate the potential of this material in water-alkali electrolyzers, providing a new approach for fabrication of low-cost advanced electrocatalysts.