Amorphous Cobalt Iron Borate Grown on Carbon Paper as a Precatalyst for Water Oxidation

High entropy alloy nanoparticles as efficient catalysts for alkaline overall seawater splitting and Zn-air batteries

High entropy alloys (HEAs) are those metallic materials that consist of five or more elements. Compared with conventional alloys, they have much more catalytic active sites due to unique structural characteristics such as high entropy effect and lattice distortion, endowing them with promising applications in the region of hydrolysis catalysts. Herein, we successfully loaded high-entropy alloys onto carbon nanotubes (FeNiCoMnRu@CNT) by hydrothermal means. It exhibits excellent HER and OER properties in alkaline seawater. To accomplish two-electrode total water splitting when constructed into Zn air cells, it only needed 1.6 V, and the timing voltage curve showed a steady current density of 10 mA cm^-2 during constant electrolysis for more than 30 h in alkaline seawater. The remarkably high HER and OER activity of FeNiCoMnRu@CNT HEAs NPS indicates the potentially broad application prospect of HEAs for Zn air battery.

Structural Regulation and Oxygen Reduction Reaction Activity of [Co(bpy)2BO2(OH)] and [Cu(bpy)(OH)]2- Complex Templated Borates

Two templated borates, [Co(bpy)₂BO₂(OH)]·[B₅O₆(OH)₄]·H₃BO₃·H₃O·H₂O (1) and [Cu(bpy)(OH)]₂·[B₅O₆(OH)₄]₂·H₂O (2), have been synthesized successfully and characterized by single-crystal X-ray diffraction, powder X-ray diffraction, and Fourier transform infrared. The [Co(bpy)₂BO₂(OH)] complex in 1 shows a very rare coordination mode between Co²⁺ and BO₂(OH)^2-. The structures of 1 and 2 can be adjusted by changing the reagent. The oxygen reduction reaction activity of these Co- and Cu-based catalysts was studied. The E_1/2 values of Co-C-750 and Cu-C-750 are 0.864 and 0.837 V, respectively.

Construction of Non-Precious Metal Self-Supported Electrocatalysts for Oxygen Evolution from a Low-Temperature Immersion Perspective

Water splitting is considered as a promising technology to solve energy shortage and environmental pollution. Since oxygen evolution reaction (OER) directly affects the efficiency of hydrogen evolution, the preparation of efficient and inexpensive OER catalysts is an urgent problem. "Low-temperature immersion" (LTI) is expected to be a prospective strategy for electrocatalyst preparation due to its simplicity and energy-saving advantages. However, there is almost no comprehensive overview on the progress of LTI engineering in the construction of non-precious metal self-supported electrocatalysts for OER. Herein, this review firstly introduces the principles and applications of LTI engineering-assisted preparation of non-precious metal self-supported electrocatalysts in terms of etching and deposition. Then the mechanism of OER is analyzed from an amorphous viewpoint, and finally some perspective insights and future challenges of this method are discussed.

Surface Boron Modulation on Cobalt Oxide Nanocrystals for Electrochemical Oxygen Evolution Reaction

Herein, we show that coupling boron with cobalt oxide tunes its structure and significantly boost its electrocatalytic performance for the oxygen evolution reaction (OER). Through a simple precipitation and thermal treatment process, a series of Co-B oxides with tunable morphologies and textural parameters were prepared. Detailed structural analysis supported first the formation of an disordered and partially amorphous material with nanosized Co₃ BO₅ and/or Co₂ B₂ O₆ being present on the local atomic scale. The boron modulation resulted in a superior OER reactivity by delivering a large current and an overpotential of 338 mV to reach a current density of 10 mA cm^-2 in 1 M KOH electrolyte. Identical location transmission electron microscopy and in situ electrochemical Raman spectroscopy studies revealed alteration and surface re-construction of materials, and formation of CoO₂ and (oxy)hydroxide intermediate, which were found to be highly dependent on crystallinity of the samples.

Highly efficient oxygen evolution reaction enabled by phosphorus-boron facilitating surface reconstruction of amorphous high-entropy materials

Efficient, cost-effective and durable electrocatalysts are highly required to overcome the slow kinetics and high overpotential of oxygen evolution reaction (OER). Here we report a series of novel amorphous high-entropy borophosphate catalysts FeCoNiMBPO_x (M = Mg, Al, Cr, Mn) prepared by a low-temperature reduction method. The leaching of boron and phosphorus accelerates the surface self-reconstruction of FeCoNiMnBPO_x, and the subsequently formed high-oxidation-state metal-OOH species is beneficial to improve the catalyst performance. Moreover, the unique amorphous structure with abundant defects provides more active sites for OER. As a return, all the samples exhibit excellent OER activity and stability. Among them, FeCoNiMnBPO_x with the highest conductivity and the largest electrochemical active surface area (ECSA) exhibits the best electrocatalytic performance, requiring only low overpotentials of 248 mV and 294 mV to reach current densities of 10 mA cm^-2 and 100 mA cm^-2, respectively. This sample also shows an exceptional durability for 50 h without a significant increase in potential, which is superior to that of the benchmark RuO₂ electrocatalyst. The combination of the adsorbate evolution mechanism (AEM) and the lattice oxygen-mediated mechanism (LOM) are responsible for the excellent catalyst performance. This work provides new ideas for designing high-activity multiple-element catalysts.

Rapid Surface Reconstruction of Amorphous Co(OH)2 /WOx with Rich Oxygen Vacancies to Promote Oxygen Evolution

Herein, a transition metal dissolution-oxygen vacancy strategy, based on dissolution of highly oxidized transition metal species in alkaline electrolyte, was suggested to construct a high-performance amorphous Co(OH)₂ /WO_x (a-CoW) catalyst for the oxygen evolution reaction (OER). The surface reconstruction of a-CoW and its evolution were described by regulating oxygen vacancies. With continuous dissolution of W species, oxygen vacancies on the surface were generated rapidly, the surface reconstruction was promoted, and the OER performance was improved significantly. During the surface reconstruction, W species also played a role in electronic modulation for Co. Due to its rapid surface reconstruction, a-CoW exhibited excellent OER performance in alkaline electrolyte with an overpotential of 208 mV at 10 mA cm^-2 and had long-term stability for at least 120 h. This work shows that the transition metal dissolution-oxygen vacancy strategy is effective for preparation of high-performance catalysts.

Anomalous self-optimization of sulfate ions for boosted oxygen evolution reaction

Broadly, the oxygen evolution reaction (OER) has been deeply understood as a significant part of energy conversion and storage. Nevertheless, the anions in the OER catalysts have been neglected for various reasons such as inactive sites, dissolution, and oxidation, amongst others. Herein, we applied a model catalyst s-Ni(OH)₂ to track the anionic behavior in the catalyst during the electrochemical process to fill this gap. The advanced operando synchrotron radiation Fourier transform infrared (SR-FTIR) spectroscopy, synchrotron radiation photoelectron spectroscopy (SRPES) depth detection and differential X-ray absorption fine structure (Δ-XAFS) spectrum jointly point out that some oxidized sulfur species (SO₄^2-) will self-optimize new Ni-S bonds during OER process. Such amazing anionic self-optimization (ASO) behavior has never been observed in the OER process. Subsequently, the optimization-derived component shows a significantly improved electrocatalytic performance (activity, stability, etc.) compared to reference catalyst Ni(OH)₂. Theoretical calculation further suggests that the ASO process indeed derives a thermodynamically stable structure of the OER catalyst, and then gives its superb catalytic performance by optimizing the thermodynamic and kinetic processes in the OER, respectively. This work demonstrates the vital role of anions in the electrochemical process, which will open up new perspectives for understanding OER and provide some new ideas in related fields (especially catalysis and chemistry).

Hollow Nanotube Ru/Cu2+1 O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁ O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁ O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁ O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm^-2 in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm^-2 in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁ O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm^-2 , which is much lower than the benchmark of IrO₂ (+)/Pt(-) counterpart (1.64 V at 10 mA cm^-2 ). The excellent performance of the Ru/Cu₂₊₁ O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.