Metal-Organic Framework-Derived Fe/Co-based Bifunctional Electrode for H2 Production through Water and Urea Electrolysis

Tunable B-Doped Cobalt Phosphide Nanosheets Engineered via Phosphorus Activation of Co-MOFs for High Efficiency Alkaline Water-Splitting

Introducing secondary heteroatoms and simultaneous in situ surface modification can enhance electrocatalysts by affecting their porosity for adjusting electrochemically active surface area (ECSA), number of active sites, and electronic properties, thus mitigating the sluggish kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Here, mesoporous 3D heterostructures of boron-doped cobalt phosphide@nitrogen-doped carbon nanosheet network arrays are successfully grown on Ni foam as free-standing bifunctional electrocatalysts with controlled phosphorous levels (B-CoPx@NC/NF, x = 0.25, 0.5, and 1). Boron doping induces the Co active sites to bind O* and OOH* intermediates. Meanwhile, an optimal phosphorous content also leads to ideal adsorption strength at each reaction step, satisfying the Sabatier principle well. The optimal B-CoP0.5@NC/NF requires low overpotentials of 248 mV for OER and 95 mV for HER with long-term stability. The B-CoP0.5@NC/NF (+/-) electrolyzer exhibits a low cell potential of 1.59 V at 10 mA cm-2 for overall water-splitting, with superior activity compared to the RuO2/NF(+)//20%Pt/NF(-) electrolyzer at high current densities above 50 mA cm-2. Such exceptional bifunctional activities are attributed to the modulated electronic structure, lower charge-transfer resistance, higher ECSA, and inductive effect of B-doping, thus boosting both OER and HER activities in alkaline media.

Boosting the capacitive property of binary metal tellurium of MnCoTe/NiFeTe yarn coils-like through surface engineering for high-performance supercapacitors

Improving the performance of electrode materials based on transition metals can significantly push advancements in energy storage devices. In this work, we offer a novel in situ tellurization approach to synthesize brand-new decorated yarn-coils MnCoTe/NiFeTe on a NiF (labeled MCTe/NFTe@NiF) which makes them attractive candidates for electrode materials in hybrid supercapacitors. At first, two consecutive hydrothermal methods were used to create electrode materials MnCo-LDH and MnCo-LDH/NiFe-LDH on nickel foam, respectively. In the following, electrode material MnCo-LDH/NiFe-LDH was subjected to a tellurization process to create MnCoTe/NiFeTe nanostructures. The direct growth strategy of electrode materials on a conductive substrate (NiF) effectively eliminates the need for polymer binder or conductive materials, thereby facilitating the redox process. The MnCoTe/NiFeTe@NiF electrode benefits from the synergistic effects of conductive tellurium and yarn coils-like morphology, resulting in faster electron/ion transport, increased efficiency, and superior electrochemical performance. The MCTe/NFTe@NiF electrode reveals highly desirable electrochemical characteristics, including a specific capacity of 223.36 mA h/g at 1 A/g, and reliable longevity surpassing 10,000 GCD cycles, with maintaining 73.18 % of its initial specific capacity at 30 A/g. We have prepared a hybrid supercapacitor (labeled MCTe/NFTe@NiF(+)//AC@NiF(-)), which utilizes the positive MCTe/NFTe@NiF and the negative AC@NiF electrodes. This hybrid supercapacitor indicated an excellent energy density of 51.55 Wh/kg, a power density of 799.98 W/kg, and showed substantial longevity (92.33 % after 10,000 GCD cycles).

Barium-induced lattice expansion of Ni(OH)2: enhancing catalytic urea oxidation activity for energy-saving H2 production

Constructing an environmentally friendly and efficient electrocatalyst holds important and profound significance for energy-efficient hydrogen production. Replacing the oxygen evolution reaction with a lower potential urea oxidation reaction (UOR) may save energy in water electrolysis to produce hydrogen. The UOR is characterized by its high energy barrier, which results in slow reaction kinetics. In this study, we introduced Ba(OH)2 into Ni(OH)2 to form uniform nanosheets. Due to the introduction of Ba2+, the lattice expansion of Ni(OH)2 was triggered, leading to significant improvement in UOR activity. The catalyst achieved a current density of 100 mA cm-2 at only 1.316 V and exhibited remarkable stability over time. Density functional theory (DFT) calculations demonstrate that the Ba-Ni(OH)2 site significantly reduces the energy barrier for urea adsorption, intermediate steps, and desorption. This work provides a novel and environmentally friendly strategy for constructing energy-efficient and highly efficient catalysts through the doping of alkaline earth metals.

Engineering advanced noble-metal-free electrocatalysts for energy-saving hydrogen production from alkaline water via urea electrolysis

When the anodic oxygen evolution reaction (OER) of water splitting is replaced by the urea oxidation reaction (UOR), the electrolyzer can fulfill hydrogen generation in an energy-economic manner for urea electrolysis as well as sewage purification. However, owing to the sluggish kinetics from a six-electron process for UOR, it is in great demand to design and fabricate high-performance and affordable electrocatalysts. Over the past years, numerous non-precious materials (especially nickel-involved samples) have offered huge potential as catalysts for urea electrolysis under alkaline conditions, even in comparison with frequently used noble-metal ones. In this review, recent efforts and progress in these high-efficiency noble-metal-free electrocatalysts are comprehensively summarized. The fundamentals and principles of UOR are first described, followed by highlighting UOR mechanism progress, and then some discussion about density functional theory (DFT) calculations and operando investigations is given to disclose the real reaction mechanism. Afterward, aiming to improve or optimize UOR electrocatalytic properties, various noble-metal-free catalytic materials are introduced in detail and classified into different classes, highlighting the underlying activity-structure relationships. Furthermore, new design trends are also discussed, including targetedly designing nanostructured materials, manipulating anodic products, combining theory and in situ experiments, and constructing bifunctional catalysts. Ultimately, we point out the outlook and explore the possible future opportunities by analyzing the remaining challenges in this booming field.

Oxygen vacancy modulated Fe-doped Co3O4 hollow nanosheet arrays for efficient oxygen evolution reaction

Herein, Fe-doped Co3O4 hollow nanosheet arrays with rich oxygen vacancies (Vo-Fe-Co3O4) are constructed using a facile strategy. Benefiting from the compositional and structural superiorities, Vo-Fe-Co3O4 exhibits a remarkable OER overpotential of 231 mV at 10 mA cm-2 and a Tafel slope of 57.45 mV dec-1 in an alkaline medium.

Hierarchical Superhydrophilic/Superaerophobic Ni(OH)2@NiFe-PBA Nanoarray Supported on Nickel Foam for Boosting the Oxygen Evolution Reaction

The design of hierarchical electrocatalysts with plentiful active sites and high mass transfer efficiency is critical to efficiently and sustainably carrying out the oxygen evolution reaction (OER), which presents a challenging and pressing need. In this study, a hierarchical Ni(OH)2@NiFe-Prussian blue analogue nanoarray grown on nickel foam (NF) [labeled as Ni(OH)2@NiFe-PBA/NF] was synthesized by combining a mild electrodeposition method with an ion-exchange strategy. The resultant Ni(OH)2@NiFe-PBA/NF displays superhydrophilic/superaerophobic properties that optimize the contact with the electrolyte, improve mass transfer efficiency, and expedite detachment of O2 bubbles during the electrocatalytic OER. Specifically, Ni(OH)2@NiFe-PBA/NF exhibits exceptional capability in the OER with low overpotentials of 224 and 240 mV at the current densities of 50 and 100 mA cm-2, respectively, accompanied by a low Tafel slope of 37.1 mV dec-1 and outstanding stability over 100 h at a fixed potential of 1.78 V vs reversible hydrogen electrode (RHE). Furthermore, Ni(OH)2@NiFe-PBA/NF demonstrates remarkable OER performance even in alkaline simulated seawater. During the OER process, active metal-OOH intermediates were formed by the partial self-reconstruction of NiFe-PBA in the heterostructure, as revealed by in situ Raman spectroscopy.

Metal-Organic Framework-Derived Mesoporous B-Doped CoO/Co@N-Doped Carbon Hybrid 3D Heterostructured Interfaces with Modulated Cobalt Oxidation States for Alkaline Water Splitting

Heteroatom-doped transition metal-oxides of high oxygen evolution reaction (OER) activities interfaced with metals of low hydrogen adsorption energy barrier for efficient hydrogen evolution reaction (HER) when uniformly embedded in a conductive nitrogen-doped carbon (NC) matrix, can mitigate the low-conductivity and high-agglomeration of metal-nanoparticles in carbon matrix and enhances their bifunctional activities. Thus, a 3D mesoporous heterostructure of boron (B)-doped cobalt-oxide/cobalt-metal nanohybrids embedded in NC and grown on a Ni foam substrate (B-CoO/Co@NC/NF) is developed as a binder-free bifunctional electrocatalyst for alkaline water-splitting via a post-synthetic modification of the metal-organic framework and subsequent annealing in different Ar/H2 gas ratios. B-CoO/Co@NC/NF prepared using 10% H2 gas (B-CoO/Co@NC/NF [10% H2 ]) shows the lowest HER overpotential (196 mV) and B-CoO/Co@NC/NF (Ar), developed in Ar, shows an OER overpotential of 307 mV at 10 mA cm-2 with excellent long-term durability for 100 h. The best anode and cathode electrocatalyst-based electrolyzer (B-CoO/Co@NC/NF (Ar)(+)//B-CoO/Co@NC/NF (10% H2 )(-)) generates a current density of 10 mA cm-2 with only 1.62 V with long-term stability. Further, density functional theory investigations demonstrate the effect of B-doping on electronic structure and reaction mechanism of the electrocatalysts for optimal interaction with reaction intermediates for efficient alkaline water-splitting which corroborates the experimental results.

MOF-derived multicomponent Fe2P-Co2P-Ni2P hollow architectures for efficient hydrogen evolution

In this work, we introduce Fe and Ni into Co-MOF to construct a kind of multicomponent phosphide hollow architecture with walls assembled by nanosheets. The multicomponent nature can enhance the intrinsic catalytic activity, while the sheet-like surface and inter-sheet voids provide a large active area, which is beneficial for electrolyte penetration and gas generation. As expected, the optimized product has catalytic hydrogen evolution reaction (HER) overpotentials of 105 and 161 mV at current densities of 10 and 100 mA cm^-2, respectively, and maintained long-term stability for over 100 hours at 10 mA cm^-2 current densities.

Self-Supporting Metal-Organic Framework-Based Nanoarrays for Electrocatalysis

The replacement of powdery catalysts with self-supporting alternatives for catalyzing various electrochemical reactions is extremely important for the large-scale commercial application of renewable energy storage and conversion technologies. Metal-organic framework (MOF)-based nanoarrays possess tunable compositions, well-defined structure, abundant active sites, effective mass and electron transport, etc., which enable them to exhibit superior electrocatalytic performance in multiple electrochemical reactions. This review presents the latest research progress in developing MOF-based nanoarrays for electrocatalysis. We first highlight the structural features and electrocatalytic advantages of MOF-based nanoarrays, followed by a detailed summary of the design and synthesis strategies of MOF-based nanoarrays, and then describe the recent progress of their application in various electrocatalytic reactions. Finally, the challenges and perspectives are discussed, where further exploration into MOF-based nanoarrays will facilitate the development of electrochemical energy conversion technologies.

Ni2P Nanoparticle-Inserted Porous Layered NiO Hetero-Structured Nanosheets as a Durable Catalyst for the Electro-Oxidation of Urea

The electro-oxidation of urea (EOU) is a remarkable but challenging sustainable technology, which largely needs a reduced electro-chemical potential, that demonstrates the ability to remove a notable harmful material from wastewater and/or transform the excretory product of humans into treasure. In this work, an Ni₂P-nanoparticle-integrated porous nickel oxide (NiO) hetero-structured nanosheet (Ni₂P@NiO/NiF) catalyst was synthesized through in situ acid etching and a gas-phase phosphating process. The as-synthesized Ni₂P@NiO/NiF catalyst sample was then used to enhance the electro-oxidation reaction of urea with a higher urea oxidation response (50 mA cm^-2 at 1.31 V vs. RHE) and low onset oxidation potential (1.31 V). The enhanced activity of the Ni₂P@NiO/NiF catalyst was mainly attributed to effective electron transport after Ni₂P nanoparticle insertion through a substantial improvement in active sites due to a larger electrochemical surface area, and a faster diffusion of ions occurred via the interactive sites at the interface of Ni₂P and NiO; thus, the structural reliability was retained, which was further evidenced by the low charge transfer resistance. Further, the Ni₂P nanoparticle insertion process into the NiO hetero-structured nanosheets effectively enabled a synergetic effect when compared to the counter of the Ni₂P/NiF and NiO/NiF catalysts. Finally, we demonstrate that the as-synthesized Ni₂P@NiO/NiF catalyst could be a promising electrode for the EOU in urea-rich wastewater and human urine samples for environmental safety management. Overall, the Ni₂P@NiO/NiF catalyst electrode combines the advantages of the Ni₂P catalyst, NiO nanosheet network, and NiF current collector for enhanced EOU performance, which is highly valuable in catalyst development for environmental safety applications.

Bimetallic CoSe2/FeSe2 hollow nanocuboids assembled by nanoparticles as a positive electrode material for a high-performance hybrid supercapacitor

Design and fabrication of impressive and novel electrode materials for energy storage devices, especially supercapacitors, are of great importance. Herein, bimetallic CoSe₂/FeSe₂ hollow nanocuboid nanostructures derived from Co/Fe-Prussian Blue analogues (denoted as CoSe₂/FeSe₂ HNCs) are successfully designed and fabricated as a remarkable positive electrode material for high-performance supercapacitors. The bimetallic CoSe₂/FeSe₂ HNC nanostructures can have increased active sites and short electron-ion diffusion pathways. Bimetallic CoSe₂/FeSe₂ HNCs@NiF as a positive electrode showed efficient supercapacitive properties with a great specific capacity of 332.75 mA h g^-1 (1197.90 C g^-1) at 1 A g^-1, retaining 80.61% of its initial capacity at 20 A g^-1, considerable longevity (91.47% of its initial capacity after 10 000 cycles) and an excellent coulombic efficiency of 98.49%. Also, the designed and fabricated CoSe₂/FeSe₂ HNCs@NiF||AC@NiF hybrid supercapacitor device using bimetallic CoSe₂/FeSe₂ HNCs@NiF (positive electrode) and activated carbon@NiF (AC, negative electrode) exhibited an efficient energy density of 63.62 W h kg^-1 and a superior durability of 91.14% after 10 000 cycles.

High-Alkaline Water-Splitting Activity of Mesoporous 3D Heterostructures: An Amorphous-Shell@Crystalline-Core Nano-Assembly of Co-Ni-Phosphate Ultrathin-Nanosheets and V- Doped Cobalt-Nitride Nanowires

Introducing amorphous and ultrathin nanosheets of transition bimetal phosphate arrays that are highly active in the oxygen evolution reaction (OER) as shells over an electronically modulated crystalline core with low hydrogen absorption energy for an excellent hydrogen evolution reaction (HER) can boost the sluggish kinetics of the OER and HER in alkaline electrolytes. Therefore, in this study, ultrathin and amorphous cobalt-nickel-phosphate (CoNiPOx ) nanosheet arrays are deposited over vanadium (V)-doped cobalt-nitride (V3% -Co4 N) crystalline core nanowires to obtain amorphous-shell@crystalline-core mesoporous 3D-heterostructures (CoNiPOx @V-Co4 N/NF) as bifunctional electrocatalysts. The optimized electrocatalyst shows extremely low HER and OER overpotentials of 53 and 270 mV at 10 mA cm-2 , respectively. The CoNiPOx @V3% -Co4 N/NF (+/-) electrolyzer utilizing the electrocatalyst as both anode and cathode demonstrates remarkable overall water-splitting activity, requiring a cell potential of only 1.52 V at 10 mA cm-2 , 30 mV lower than that of the RuO2 /NF (+)/20%-Pt/C/NF (-) electrolyzer. Such impressive bifunctional activities can be attributed to abundant active sites, adjusted electronic structure, lower charge-transfer resistance, enhanced electrochemically active surface area (ECSA), and surface- and volume-confined electrocatalysis resulting from the synergistic effects of the crystalline V3% -Co4 N core and amorphous CoNiPOx shells boosting water splitting in alkaline media.

Bifunctional P-Intercalated and Doped Metallic (1T)-Copper Molybdenum Sulfide Ultrathin 2D-Nanosheets with Enlarged Interlayers for Efficient Overall Water Splitting

Metallic (1T) molybdenum disulfide (MoS₂) is a much better electrocatalyst than the semiconducting (2H) MoS₂ because of its superior conductivity, presence of active basal planes, and bulky interlayers. However, the lack of thermodynamic stability has hindered its practical uses. The insertion of transition metals and nonmetals in the interlayers and the crystal is known to improve both the thermodynamic stability and the catalytic efficacy of 1T-MoS₂. In this study, for the first time we have developed an electrocatalyst for water splitting based on metallic copper molybdenum sulfide (1T-CMS). The present catalyst, P-doped and intercalated 1T-CMS ultrathin 2D nanosheets on carbon cloth (P-1T-CMS@CC), demonstrates excellent catalytic efficacy for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). It required an overpotential of 95 mV for HER and of 284 mV for OER at a current density of 10 mA cm^-2. The P-1T-CMS@CC(+ -) device also shows excellent performance, requiring a cell voltage of only 1.51 V at a current density of 10 mA cm^-2.

Advanced Nickel-Based Catalysts for Urea Oxidation Reaction: Challenges and Developments

The electrochemical urea oxidation reaction (UOR) is crucial for determining industrial and commercial applications of urea-based energy conversion devices. However, the performance of UOR is limited by the dynamic complex of the six-electron transfer process. To this end, it is essential to develop efficient UOR catalysts. Nickel-based materials have been extensively investigated owing to their high activity, easy modification, stable properties, and cheap and abundant reserves. Various material designs and strategies have been investigated in producing highly efficient UOR catalysts including alloying, doping, heterostructure construction, defect engineering, micro functionalization, conductivity modulation, etc. It is essential to promptly review the progress in this field to significantly inspire subsequent studies. In this review, we summarized a comprehensive investigation of the mechanisms of oxidation or poisoning and UOR processes on nickel-based catalysts as well as different approaches to prepare highly active catalysts. Moreover, challenges and prospects for future developments associated with issues of UOR in urea-based energy conversion applications were also discussed.

Alkaline Water Splitting Enhancement by MOF-Derived Fe-Co-Oxide/Co@NC-mNS Heterostructure: Boosting OER and HER through Defect Engineering and In Situ Oxidation

Introducing defects and in situ topotactic transformation of the electrocatalysts generating heterostructures of mixed-metal oxides(hydroxides) that are highly active for oxygen evolution reaction (OER) in tandem with metals of low hydrogen adsorption barrier for efficient hydrogen evolution reaction (HER) is urgently demanded for boosting the sluggish OER and HER kinetics in alkaline media. Ascertaining that, metal-organic-framework-derived freestanding, defect-rich, and in situ oxidized Fe-Co-O/Co metal@N-doped carbon (Co@NC) mesoporous nanosheet (mNS) heterostructure on Ni foam (Fe-Co-O/Co@NC-mNS/NF) is developed from the in situ oxidation of micropillar-like heterostructured Fe-Co-O/Co@NC/NF precatalyst. The in situ oxidized Fe-Co-O/Co@NC-mNS/NF exhibits excellent bifunctional properties by demanding only low overpotentials of 257 and 112 mV, respectively, for OER and HER at the current density of 10 mA cm^-2 , with long-term durability, attributed to the existence of oxygen vacancies, higher specific surface area, increased electrochemical active surface area, and in situ generated new metal (oxyhydr)oxide phases. Further, Fe-Co-O/Co@NC-mNS/NF (+/-) electrolyzer requires only a low cell potential of 1.58 V to derive a current density of 10 mA cm^-2 . Thus, the present work opens a new window for boosting the overall alkaline water splitting.

Iron and nitrogen Co-doped CoSe2 nanosheet arrays for robust electrocatalytic water oxidation

Fe–N–CoSe₂ electrocatalysts with good OER performance and long-term durability were synthesized using an anion and cation co-doping strategy.

Hollow bimetallic selenide derived from a hierarchical MOF-based Prussian blue analogue for urea electrolysis

PBA@MOF–Ni/Se with a nanocube structure grown on a flower-shaped MOF–Ni template exhibits better performance in urea electrolysis.

Cobalt-Based Metal-Organic Frameworks and Their Derivatives for Hydrogen Evolution Reaction

Hydrogen has been considered as a promising alternative energy to replace fossil fuels. Electrochemical water splitting, as a green and renewable method for hydrogen production, has been drawing more and more attention. In order to improve hydrogen production efficiency and lower energy consumption, efficient catalysts are required to drive the hydrogen evolution reaction (HER). Cobalt (Co)-based metal-organic frameworks (MOFs) are porous materials with tunable structure, adjustable pores and large specific surface areas, which has attracted great attention in the field of electrocatalysis. In this review, we focus on the recent progress of Co-based metal-organic frameworks and their derivatives, including their compositions, morphologies, architectures and electrochemical performances. The challenges and development prospects related to Co-based metal-organic frameworks as HER electrocatalysts are also discussed, which might provide some insight in electrochemical water splitting for future development.

Value-Added Formate Production from Selective Methanol Oxidation as Anodic Reaction to Enhance Electrochemical Hydrogen Cogeneration

Electrolytic overall water splitting is a promising approach to produce H₂ , but its efficiency is severely limited by the sluggish kinetics of the oxygen evolution reaction (OER) and the low activity of current electrocatalysts. To solve these problems, in addition to the development of efficient precious-metal catalysts, an effective strategy is proposed to replace the OER by the selective methanol oxidation reaction. Ni-Co hydroxide [Ni_x Co_1-x (OH)₂ ] nanoarrays were obtained through a facile hydrothermal treatment as the bifunctional electrocatalysts for the co-electrolysis of methanol/water to produce H₂ and value-added formate simultaneously. The electrocatalyst could catalyze selective methanol oxidation (≈1.32 V) with a significantly lower energy consumption (≈0.2 V less) than OER. Importantly, methanol was transformed exclusively to value-added formate with a high Faradaic efficiency (selectivity) close to 100 %. Specifically, a cell voltage of only approximately 1.5 V was required to generate a current density of 10 mA cm^-2 . Furthermore, the Ni_0.33 Co_0.67 (OH)₂ /Ni foam nanoneedle arrays presented an outstanding stability for overall co-electrolysis.

Paired electrolysis for simultaneous generation of synthetic fuels and chemicals

Replacing anodic oxygen evolution of water splitting or carbon dioxide reduction by electro-organic oxidation increases their product-value and energy efficiency.