Enlarging the π-Conjugation of Cobalt Porphyrin for Highly Active and Selective CO2 Electroreduction

Advances and Challenges in Interfacial Binding Forces for Electrocatalysts

As a practical chemical energy conversion technology, electrocatalysis could be used in fields of energy conversion and environmental protection. In recent years, significant research efforts have been devoted to the design and development of high-performance electrocatalysts because the rational design of catalysts is crucial for enhancing electrocatalytic performance. Creating electrocatalysts by forming interactions between different components at the interface is an important means of controlling and improving performance. Therefore, several common interfacial binding forces used for synthesizing electrocatalysts was systematically summarized in this review for the first time. The discussion revolves around the crucial roles these binding forces play in various electrocatalytic reaction processes. Various characterization techniques capable of proving the existence of these interfacial binding forces was also involved in the review. Finally, some prospects and challenges for designing and researching materials through the utilization of interfacial binding forces were presented.

Scaling up electrochemical CO2 reduction: enhancing the performance of metalloporphyrin complexes in zero-gap electrolyzers

Metalloporphyrins are widely studied in the field of electrochemical CO2 reduction (CO2R), with the main focus on homogenous catalysis. Herein, six metalloporphyrins (M = Fe, Co, Ni, Cu, Zn, Ag) were incorporated in gas diffusion electrodes and used in zero-gap electrolyzers to reach varying FEs for CO of <1% (Fe,Ni), 11% (Cu), 37% (Zn), 75% (Co) and nearly 100% (Ag) at a current density of 50 mA cm-2.

Ultrathin, Cationic Covalent Organic Nanosheets for Enhanced CO2 Electroreduction to Methanol

Metalloporphyrins and metallophthalocyanines emerge as popular building blocks to develop covalent organic nanosheets (CONs) for CO2 reduction reaction (CO2RR). However, existing CONs predominantly yield CO, posing a challenge in achieving efficient methanol production through multielectron reduction. Here, ultrathin, cationic, and cobalt-phthalocyanine-based CONs (iminium-CONs) are reported for electrochemical CO2-to-CH3OH conversion. The integration of quaternary iminium groups enables the formation of ultrathin morphology with uniformly anchored cobalt active sites, which are pivotal for facilitating rapid multielectron transfer. Moreover, the cationic iminium-CONs exhibit a lower activity for hydrogen evolution side reaction. Consequently, iminium-CONs manifest significantly enhanced selectivity for methanol production, as evidenced by a remarkable 711% and 270% improvement in methanol partial current density (jCH3OH) compared to pristine CoTAPc and neutral imine-CONs, respectively. Under optimized conditions, iminium-CONs deliver a high jCH3OH of 91.7 mA cm-2 at -0.78 V in a flow cell. Further, iminium-CONs achieve a global methanol Faradaic efficiency (FECH3OH) of 54% in a tandem device. Thanks to the single-site feature, the methanol is produced without the concurrent generation of other liquid byproducts. This work underscores the potential of cationic covalent organic nanosheets as a compelling platform for electrochemical six-electron reduction of CO2 to methanol.

Conjugated Nickel Phthalocyanine Derivatives for Heterogeneous Electrocatalytic H2O2 Synthesis

Electrocatalytic hydrogen peroxide (H2O2) production has emerged as a promising alternative to the chemical method currently used in industry, due to its environmentally friendly conditions and potential for higher activity and selectivity. Heterogeneous molecular catalysts are promising in this regard, as their active site configurations can be judiciously designed, modified, and tailored with diverse functional groups, thereby tuning the activity and selectivity of the active sites. In this work, nickel phthalocyanine derivatives with various conjugation degrees are synthesized and identified as effective pH-universal electrocatalysts for H2O2 production after heterogenized on nitrogen-decorated carbon, with increased conjugation degrees leading to boosted selectivity. This is explained by the regulated d-band center, which optimized the binding energy of the reaction intermediate, reducing the energy barrier for oxygen reduction and leading to optimized H2O2 selectivity. The best catalyst, NiPyCN/CN, exhibits a high H2O2 electrosynthesis activity with ≈95% of H2O2 faradic efficiency in an alkaline medium, demonstrating its potential for H2O2 production.

Electrocatalytic Oxygen Reduction Reaction of Peripheral Functionalized Cobalt Porphyrins(2.1.2.1)

Two peripheral functionalized clamp-shaped cobalt porphyrin(2.1.2.1) complexes were synthesized, and their electrocatalytic ORR abilities were investigated. The crystal data and optical and redox properties of them were revised by peripheral modification. The ORR capacities and DFT calculations of F5PhCo and F5NCo suggest superior selectivity for the 4e- ORR pathway. This work further confirms the clamp-shaped cobalt porphyrin complexes are ideal Co-N4 ORR catalysts.

How to rationally design homogeneous catalysts for efficient CO2 electroreduction?

Electrified converting CO2 into valuable fuels and chemicals using a homogeneous electrochemical CO2 reduction (CO2ER) approach simplifies the operation, providing a potential option for decoupling energy harvesting and renewable chemical production. These merits benefit the scenarios where decentralization and intermittent power are key factors. This perspective aims to provide an overview of recent progress in homogeneous CO2ER. We introduce firstly the fundamentals chemistry of the homogeneous CO2ER, followed by a summary of the crucial factors and the important criteria broadly employed for evaluating the performance. We then highlight the recent advances in the most widely explored transition-metal coordinate complexes for the C1 and multicarbon (C2+) products from homogeneous CO2ER. Finally, we summarize the remaining challenges and opportunities for developing homogeneous electrocatalysts for efficient CO2ER. This perspective is expected to favor the rational design of efficient homogeneous electrocatalysts for selective CO2ER toward renewable fuels and feedstocks.

Proton Transfer Dynamics-Mediated CO2 Electroreduction

Electrochemical CO₂ reduction reaction (CO₂ RR) is crucial to addressing environmental crises and producing chemicals. Proton activation and transfer are essential in CO₂ RR. To date, few research reviews have focused on this process and its effect on catalytic performance. Recent studies have demonstrated ways to improve CO₂ RR by regulating proton transfer dynamics. This Concept highlights the use of regulating proton transfer dynamics to enhance CO₂ RR for the target product and discusses modulation strategies for proton transfer dynamics and operative mechanisms in typical systems, including single-atom catalysts, molecular catalysts, metal heterointerfaces, and organic-ligand modified metal catalysts. Characterization methods for proton transfer dynamics during CO₂ RR are also discussed, providing powerful tools for the hydrogen-involving electrochemical study. This Concept offers new insights into the CO₂ RR mechanism and guides the design of efficient CO₂ RR systems.

Asymmetric Push-Pull Type Co(II) Porphyrin for Enhanced Electrocatalytic CO2 Reduction Activity

Molecular electrocatalysts for electrochemical carbon dioxide (CO₂) reduction has received more attention both by scientists and engineers, owing to their well-defined structure and tunable electronic property. Metal complexes via coordination with many π-conjugated ligands exhibit the unique electrocatalytic CO₂ reduction performance. The symmetric electronic structure of this metal complex may play an important role in the CO₂ reduction. In this work, two novel dimethoxy substituted asymmetric and cross-symmetric Co(II) porphyrin (PorCo) have been prepared as the model electrocatalyst for CO₂ reduction. Owing to the electron donor effect of methoxy group, the intramolecular charge transfer of these push-pull type molecules facilitates the electron mobility. As electrocatalysts at -0.7 V vs. reversible hydrogen electrode (RHE), asymmetric methoxy-substituted Co(II) porphyrin shows the higher CO₂-to-CO Faradaic efficiency (FE_CO) of ~95 % and turnover frequency (TOF) of 2880 h^-1 than those of control materials, due to its push-pull type electronic structure. The density functional theory (DFT) calculation further confirms that methoxy group could ready to decrease to energy level for formation *COOH, leading to high CO₂ reduction performance. This work opens a novel path to the design of molecular catalysts for boosting electrocatalytic CO₂ reduction.

Hydrogen Evolution Reaction, Electrochemical CO2 Reduction, and Oxidative Photodegradation of Organic Dyes Catalyzed by Co(II) Trimethoxy-Meso-Arylporphyrin

In search of robust catalysts for redox transformations such as the hydrogen evolution reaction (HER) or CO2 to CO reduction, we stepped on the previously reported meso-tetrakis(3,4,5-trimethoxyphenyl)porphyrinato cobalt(II) complex [Co(TTMPP)]. We prepared [Co(TTMPP)] in good yields and characterized it by IR, UV-vis absorption, photoluminescence spectroscopy, and cyclic voltammetry (CV). The [Co(TTMPP)] was used as a homogeneous catalyst for the electrochemical formation of H2 (HER) in DMF (N,N’-dimethylformamide)/TFA (trifluoroacetic acid) and DMF/EtN3BF4 solutions, with high faradic efficiencies (FE). Additionally, the reduction of CO2 to CO in DMF under a CO2 atmosphere was catalyzed in DMF/TFE (TFE = 2,2,2-trifluoroethanol) and DMF/PhOH with high FE and only traces of H2 as a by-product. Turnover frequencies of 15.80 or 9.33 s−1, respectively were determined from CV experiments or controlled potential electrolysis in the presence of 1eq. TFE. They were lower with PhOH as proton source with 13.85 or 8.31 s−1, respectively. Further, [Co(TTMPP)] as a solid catalyst (suspension) allowed the photodecomposition of the organic dyes methylene blue (MB) and rhodamine B (RhB) using H2O2 under visible light irradiation. The photocatalyst was photostable over five cycles. A photocatalytic mechanism was proposed based on trapping experiments of reactive oxygen species.

Tailoring of Active Sites from Single to Dual Atom Sites for Highly Efficient Electrocatalysis

Single atom catalysts (SACs) have been attracting extensive attention in electrocatalysis because of their unusual structure and extreme atom utilization, but the low metal loading and unified single site induced scaling relations may limit their activity and practical application. Tailoring of active sites at the atomic level is a sensible approach to break the existing limits in SACs. In this review, SACs were first discussed regarding carbon or non-carbon supports. Then, five tailoring strategies were elaborated toward improving the electrocatalytic activity of SACs, namely strain engineering, spin-state tuning engineering, axial functionalization engineering, ligand engineering, and porosity engineering, so as to optimize the electronic state of active sites, tune d orbitals of transition metals, adjust adsorption strength of intermediates, enhance electron transfer, and elevate mass transport efficiency. Afterward, from the angle of inducing electron redistribution and optimizing the adsorption nature of active centers, the synergistic effect from adjacent atoms and recent advances in tailoring strategies on active sites with binuclear configuration which include simple, homonuclear, and heteronuclear dual atom catalysts (DACs) were summarized. Finally, a summary and some perspectives for achieving efficient and sustainable electrocatalysis were presented based on tailoring strategies, design of active sites, and in situ characterization.

Molecular Engineering of CoII Porphyrins with Asymmetric Architecture for Improved Electrochemical CO2 Reduction

The electrochemical reduction of carbon dioxide (CO₂ ) based on molecular catalysts has attracted more attention, owing to their well-defined active sites and rational structural design. Metal porphyrins (PorMs) have the extended π-conjugated backbone with different transition metals, endowing them with unique CO₂ reduction properties. However, few works focus on the investigation of symmetric architecture of PorMs as well as their aggregation behavior to CO₂ reduction. In this work, a series of Co^II porphyrins (PorCos) with symmetric and asymmetric substituents were used as model of molecular catalysts for CO₂ reduction. Owing to the electron donating effect of 2,6-dimethylbenzene (DMB), bandgaps of the complexes became narrower with the increasing number of DMB. As electrocatalysts, all PorCos exhibited promising electrocatalytic CO₂ reduction performance. Among the three molecules, asymmetric Co^II porphyrin (as-PorCo) showed the lowest onset potential of -288 mV and faradaic efficiencies exceeding 93 % at -0.6 V vs. reversible hydrogen electrode, which is highly competitive among the reported state-of-art porphyrin-based electrocatalysts. The CO₂ reduction performance depended on π-π stacking between PorCo with carbon nanotubes (CNTs) and adjacent PorCos, which could be readily controlled by atomically positioned DMB in PorCo. Density functional theory calculations also suggested that the charge density between PorCo and CNT was highest due to the weak steric hindrance in as-PorCo, providing the new insight into molecular design of catalysts for efficient electrochemical CO₂ reduction.

Atomic- and Molecular-Level Modulation of Dispersed Active Sites for Electrocatalytic CO2 Reduction

Global climate changes have been impacted by the excessive CO 2 emission, which exacerbates the environmental problems. Electrochemical CO 2 reduction (CO 2 RR) offers the solution for utilizing CO 2 as feedstocks for value-added products while potentially mitigating the negative effects. Owing to the extreme stability of CO 2 , selectivity and efficiency are crucial factors in the development of CO 2 RR electrocatalysts. Recently, single-atom catalysts have emerged as potential electrocatalysts for CO 2 reduction. They generally comprise of atomically- and molecularly dispersed active sites over conductive supports, which enable atomic-level and molecular-level modulations. In this minireview, catalyst preparations, principle of modulations, and reaction mechanisms are summarised together with related recent advances. The atomic-level modulations are first discussed, followed by the molecular-level modulations. Finally, the current challenges and future opportunities are provided as guidance for further developments regarding the discussed topics.

Immobilization strategies for porphyrin-based molecular catalysts for the electroreduction of CO2

The ever-growing level of carbon dioxide (CO2) in our atmosphere, is at once a threat and an opportunity. The development of sustainable and cost-effective pathways to convert CO2 to value-added chemicals is central to reducing its atmospheric presence. Electrochemical CO2 reduction reactions (CO2RRs) driven by renewable electricity are among the most promising techniques to utilize this abundant resource; however, in order to reach a system viable for industrial implementation, continued improvements to the design of electrocatalysts is essential to improve the economic prospects of the technology. This review summarizes recent developments in heterogeneous porphyrin-based electrocatalysts for CO2 capture and conversion. We specifically discuss the various chemical modifications necessary for different immobilization strategies, and how these choices influence catalytic properties. Although a variety of molecular catalysts have been proposed for CO2RRs, the stability and tunability of porphyrin-based catalysts make their use particularly promising in this field. We discuss the current challenges facing CO2RRs using these catalysts and our own solutions that have been pursued to address these hurdles.

CO2 to CO Electroreduction, Electrocatalytic H2 Evolution, and Catalytic Degradation of Organic Dyes Using a Co(II) meso-Tetraarylporphyrin

The meso-tetrakis(4-(trifluoromethyl)phenyl)porphyrinato cobalt(II) complex [Co(TMFPP)] was synthesised in 93% yield. The compound was studied by 1H NMR, UV-visible absorption, and photoluminescence spectroscopy. The optical band gap Eg was calculated to 2.15 eV using the Tauc plot method and a semiconducting character is suggested. Cyclic voltammetry showed two fully reversible reduction waves at E1/2 = -0.91 V and E1/2 = -2.05 V vs. SCE and reversible oxidations at 0.30 V and 0.98 V representing both metal-centred (Co(0)/Co(I)/Co(II)/Co(III)) and porphyrin-centred (Por2-/Por-) processes. [Co(TMFPP)] is a very active catalyst for the electrochemical formation of H2 from DMF/acetic acid, with a Faradaic Efficiency (FE) of 85%, and also catalysed the reduction of CO2 to CO with a FE of 90%. Moreover, the two triarylmethane dyes crystal violet and malachite green were decomposed using H2O2 and [Co(TMFPP)] as catalyst with an efficiency of more than 85% in one batch.

Hydroxy-Group-Functionalized Single Crystal of Copper(II)-Porphyrin Complex for Electroreduction CO2 to CH4

Purposefully developing crystalline materials at molecular level to improve the selectivity of electroreduction CO₂ to CH₄ is still rarely studied. Herein, a single crystal of copper(II) complex with hydroxy groups was designed and synthesized, namely 5,10,15,20-tetrakis(3,4-dihydroxyphenyl)porphyrin copper(II) (Cu-PorOH), which could serve as a highly efficient heterogeneous electrocatalyst for electroreduction of CO₂ toward CH₄ . In 0.5 m KHCO₃ , Cu-PorOH gave a high faradaic efficiency of 51.3 % for CH₄ and drove a partial current density of 23.2 mA cm^-2 at -1.5 V versus the reversible hydrogen electrode in H-cell. The high performance was greatly promoted by the hydroxy groups in Cu-PorOH, which could not only form stable three-dimensional frameworks through hydrogen-bonding interactions but also stabilize the intermediate species by hydrogen bonds, as supported by density functional theory calculations. This work provides an effective avenue in exploring crystalline catalysts for CO₂ reduction at molecular level.

Promoting CO2 Electroreduction Kinetics on Atomically Dispersed Monovalent Zn(I) Sites by Rationally Engineering Proton-feeding Centers

Electrocatalytic reduction of CO2 (CO2RR) to value-added chemicals is of great significance for CO2 utilization. Due to the slow proton-feeding rates from sluggish water dissociation kinetics, however, the CO2RR process involving multi-electron and proton transfer is greatly limited by poor selectivity and low yield. Herein, we develop an atomically dispersed monovalent zinc anchored on nitrogenated carbon nanosheets (Zn/NC NSs) as an efficient catalyst for CO2RR. Benefiting from the unique coordination environment and atomic dispersion, the optimized Zn/NC NSs exhibits a superior CO2RR performance, featured by a high current density up to 50 mA cm-2 with an outstanding CO Faradaic efficiency of ～95%. The center Zn(I) atom coordinated with three N atoms and one N atom that bridge over two adjacent graphitic edge (Zn-N3+1) is identified as the catalytically active site by thorough structural characterizations. In-situ attenuated total reflectance infrared absorption spectroscopy results reveal that the twisted Zn-N3+1 structure accelerates the CO2 activation and protonation in the rate-determining step of *CO2 to *COOH on the rationally engineered proton-feeding centers, while theoretical calculations elucidate that atomically dispersed Zn-N3+1 moieties decrease the potential barriers for the intermediate COOH* formation, promoting the proton-coupled CO2RR kinetics and boosting the overall catalytic performance. A rechargeable Zn-CO2 battery based on the Zn/NC NS cathode delivers a maximal power density of 1.8 mW cm-2.