Recent Progress on Intercalation-Based Anode Materials for Low-Cost Sodium-Ion Batteries

Overcoming copper-induced conversion reactions in nickel disulphide anodes for sodium-ion batteries

Employing copper (Cu) as an anode current collector for metal sulphides is perceived as a general strategy to achieve stable cycle performance in sodium-ion batteries, despite the compatibility of the aluminium current collector with sodium at low voltages. The capacity retention is attributed to the formation of copper sulphide with the slow corrosion of the current collector during cycling which is not ideal. Conventional reports on metal sulphides demonstrate excellent electrochemical performances using excessive carbon coatings/additives, reducing the overall energy density of the cells and making it difficult to understand the underlying side reaction with Cu. In this report, the negative influence of the Cu current collector is demonstrated with in-house synthesised, scalable NiS2 nanoparticles without any carbon coating as opposed to previous works on NiS2 anodes. Ex situ TEM and XPS experiments revealed the formation of Cu2S, further to which various current collectors were employed for NiS2 anode to rule out the parasitic reaction and to understand the true performance of the material. Overall, this study proposes the utilisation of carbon-coated aluminium foil (C/Al) as a suitable current collector for high active material content NiS2 anodes and metal sulphides in general with minimal carbon contents as it remains completely inert during the cycling process. Using a C/Al current collector, the NiS2 anode exhibits stable cycling performance for 5000 cycles at 50 A g-1, maintaining a capacity of 238 mA h g-1 with a capacity decay rate of 8.47 × 10-3% per cycle.

Recent progress and strategic perspectives of inorganic solid electrolytes: fundamentals, modifications, and applications in sodium metal batteries

Solid-state electrolytes (SEs) have attracted overwhelming attention as a promising alternative to traditional organic liquid electrolytes (OLEs) for high-energy-density sodium-metal batteries (SMBs), owing to their intrinsic incombustibility, wider electrochemical stability window (ESW), and better thermal stability. Among various kinds of SEs, inorganic solid-state electrolytes (ISEs) stand out because of their high ionic conductivity, excellent oxidative stability, and good mechanical strength, rendering potential utilization in safe and dendrite-free SMBs at room temperature. However, the development of Na-ion ISEs still remains challenging, that a perfect solution has yet to be achieved. Herein, we provide a comprehensive and in-depth inspection of the state-of-the-art ISEs, aiming at revealing the underlying Na⁺ conduction mechanisms at different length scales, and interpreting their compatibility with the Na metal anode from multiple aspects. A thorough material screening will include nearly all ISEs developed to date, i.e., oxides, chalcogenides, halides, antiperovskites, and borohydrides, followed by an overview of the modification strategies for enhancing their ionic conductivity and interfacial compatibility with Na metal, including synthesis, doping and interfacial engineering. By discussing the remaining challenges in ISE research, we propose rational and strategic perspectives that can serve as guidelines for future development of desirable ISEs and practical implementation of high-performance SMBs.

Microwave-Regulated Bi Nanoparticles on Carbon Nanotube Networks as a Freestanding Electrode for Flexible Sodium-Ion Capacitors

High capacity, long cycle life, and fast kinetics are highly desired for alloying anodes in sodium ion capacitors (SICs). However, the huge repeatedly volume changes during the alloying/dealloying process cause electrode pulverization, seriously degrading the capacity and cycling stability. To address this issue, we developed a microwave irradiation technology for the in-situ growth of nano-sized Bi uniformly anchored on the surface of carbon nanotubes (CNTs). The as-synthesized freestanding electrode film effectively retards the pulverization of Bi nanoparticles, enabling fast sodium storage kinetics for high-power performance (278.1 mAh g^-1 @ 30 A g^-1), as well as high-capacity retention of 94% for over 3,500 cycles. The coin-cell type SICs of a Bi/CNTs anode paired with an activated carbon (AC)/CNTs cathode can deliver a maximum energy density of 128.5 Wh kg^-1 and a high power density of 12.3 kW kg^-1 with a remaining energy density of 85 Wh kg^-1. Additionally, the flexible quasi-solid SICs using a gel electrolyte demonstrated a high volumetric energy density of 21 mWh cm^-3 with good cycling stability (90%) for over 1500 cycles. These results show great promise for our developed SICs as the next-generation energy storage to bridge the performance gap between batteries and supercapacitors, as well as for flexible energy storage applications.

P-doped porous carbon derived from walnut shell for zinc ion hybrid capacitors

Zinc ion hybrid capacitors (ZHCs) are expected to be candidates for large-scale energy storage products due to their high power density and large energy density. Due to their low cost and stability, carbon materials are generally the first choice for the cathode of ZHCs, but they face a challenge in the serious self-discharge behavior. Herein, zinc ion hybrid capacitors with high-performance are successfully assembled using a porous carbon cathode derived from low-cost p-doped waste biomass and a commercial zinc foil anode. The p-doped walnut shell ZHCs delivered a specific capacity of 158.9 mA h g⁻¹ with an energy density of 127.1 W h kg⁻¹ at a low current density. More importantly, the device had outstanding anti-self-discharge characteristics (retaining 77.98% of its specific capacity after a 72 h natural self-discharge test) and long-term cycle stability (retaining 88.2% of its initial specific capacity after 15 000 cycles at 7.5 A g⁻¹). This work presents guidance and support for the design and optimization of electrode materials for zinc ion supercapacitors and next-generation aqueous zinc ion energy storage performance.

A P-doped porous carbon cathode material from walnut shell is assembled with zinc foil to form typical ZHCs, which showed excellent energy storage characteristics and long-life cycle stability.