Catalytic Oxidation of Alkanes and Alkenes by H2O2with a μ-Oxido Diiron(III) Complex as Catalyst/Catalyst Precursor

μ-Oxo-bridged diiron(iii) complexes of tripodal 4N ligands as catalysts for alkane hydroxylation reaction using m-CPBA as an oxidant: substrate vs. self hydroxylation

A series of non-heme μ-oxo-bridged dinuclear iron(iii) complexes of the type [Fe₂(μ-O)(L1–L6)₂Cl₂]Cl₂1–6 have been isolated and their catalytic activity towards oxidative transformation of alkanes into alcohols has been studied using m-choloroperbenzoic acid (m-CPBA) as an oxidant. All the complexes were characterized by CHN, electrochemical, and UV-visible spectroscopic techniques. The molecular structures of 2 and 5 have been determined successfully by single crystal X-ray diffraction analysis and both possesses octahedral coordination geometry and each iron atom is coordinated by four nitrogen atoms of the 4N ligand and a bridging oxygen. The sixth position of each octahedron is coordinated by a chloride ion. The (μ-oxo)diiron(iii) core is linear in 2 (Fe–O–Fe, 180.0°), whereas it is non-linear (Fe–O–Fe, 161°) in 5. All the diiron(iii) complexes show quasi-reversible one electron transfer in the cyclic voltammagram and catalyze the hydroxylation of alkanes like cyclohexane, adamantane with m-CPBA as an oxidant. In acetonitrile solution, adding excess m-CPBA to the diiron(iii) complex 2 without chloride ions leads to intramolecular hydroxylation reaction of the oxidant. Interestingly, 2 catalyzes alkane hydroxylation in the presence of chloride ions, but intramolecular hydroxylation in the absence of chloride ions. The observed selectivity for cyclohexane (A/K, 5–7) and adamantane (3°/2°, 9–18) suggests the involvement of high-valent iron–oxo species rather than freely diffusing radicals in the catalytic reaction. Moreover, 4 oxidizes (A/K, 7) cyclohexane very efficiently up to 513 TON while 5 oxidizes adamantane with good selectivity (3°/2°, 18) using m-CPBA as an oxidant. The electronic effects of ligand donors dictate the efficiency and selectivity of catalytic hydroxylation of alkanes.

The ligand stereoelectronic effect of diiron(iii) complexes determines the efficiency and selectivity of catalytic alkane hydroxylation with m-CPBA as an oxidant.

Metal Complexes Containing Redox-Active Ligands in Oxidation of Hydrocarbons and Alcohols: A Review

Ligands are innocent when they allow oxidation states of the central atoms to be defined. A noninnocent (or redox) ligand is a ligand in a metal complex where the oxidation state is not clear. Dioxygen can be a noninnocent species, since it exists in two oxidation states, i.e., superoxide (O2−) and peroxide (O22−). This review is devoted to oxidations of C–H compounds (saturated and aromatic hydrocarbons) and alcohols with peroxides (hydrogen peroxide, tert-butyl hydroperoxide) catalyzed by complexes of transition and nontransition metals containing innocent and noninnocent ligands. In many cases, the oxidation is induced by hydroxyl radicals. The mechanisms of the formation of hydroxyl radicals from H2O2 under the action of transition (iron, copper, vanadium, rhenium, etc.) and nontransition (aluminum, gallium, bismuth, etc.) metal ions are discussed. It has been demonstrated that the participation of the second hydrogen peroxide molecule leads to the rapture of O–O bond, and, as a result, to the facilitation of hydroxyl radical generation. The oxidation of alkanes induced by hydroxyl radicals leads to the formation of relatively unstable alkyl hydroperoxides. The data on regioselectivity in alkane oxidation allowed us to identify an oxidizing species generated in the decomposition of hydrogen peroxide: (hydroxyl radical or another species). The values of the ratio-of-rate constants of the interaction between an oxidizing species and solvent acetonitrile or alkane gives either the kinetic support for the nature of the oxidizing species or establishes the mechanism of the induction of oxidation catalyzed by a concrete compound. In the case of a bulky catalyst molecule, the ratio of hydroxyl radical attack rates upon the acetonitrile molecule and alkane becomes higher. This can be expanded if we assume that the reactions of hydroxyl radicals occur in a cavity inside a voluminous catalyst molecule, where the ratio of the local concentrations of acetonitrile and alkane is higher than in the whole reaction volume. The works of the authors of this review in this field are described in more detail herein.

Catalyst-Free Selective Oxidation of Diverse Olefins to Carbonyls in High Yield Enabled by Light under Mild Conditions

The selective oxidation of olefins, in particular, aromatic olefins to carbonyls, is of significance in organic synthesis. In general, stoichiometric toxic oxidants or a high-cost catalyst is required. Herein we report a novel and practical light-enabled protocol for the synthesis of carbonlys in high yield through a catalyst-free oxidation of olefins using H₂O₂ as a clean oxidant. A broad scope of carbonyls can be synthesized in high yield, and no catalyst or toxic oxidant is required.

Di- and Tetrairon(III) μ-Oxido Complexes of an N3S-Donor Ligand: Catalyst Precursors for Alkene Oxidations

The new di- and tetranuclear Fe(III) μ-oxido complexes [Fe₄(μ-O)₄(PTEBIA)₄](CF₃SO₃)₄(CH₃CN)₂] (1a), [Fe₂(μ-O)Cl₂(PTEBIA)₂](CF₃SO₃)₂ (1b), and [Fe₂(μ-O)(HCOO)₂(PTEBIA)₂](ClO₄)₂ (MeOH) (2) were prepared from the sulfur-containing ligand (2-((2,4-dimethylphenyl)thio)-N,N-bis ((1-methyl-benzimidazol-2-yl)methyl)ethanamine (PTEBIA). The tetrairon complex 1a features four μ-oxido bridges, while in dinuclear 1b, the sulfur moiety of the ligand occupies one of the six coordination sites of each Fe(III) ion with a long Fe-S distance of 2.814(6) Å. In 2, two Fe(III) centers are bridged by one oxido and two formate units, the latter likely formed by methanol oxidation. Complexes 1a and 1b show broad sulfur-to-iron charge transfer bands around 400–430 nm at room temperature, consistent with mononuclear structures featuring Fe-S interactions. In contrast, acetonitrile solutions of 2 display a sulfur-to-iron charge transfer band only at low temperature (228 K) upon addition of H₂O₂/CH₃COOH, with an absorption maximum at 410 nm. Homogeneous oxidative catalytic activity was observed for 1a and 1b using H₂O₂ as oxidant, but with low product selectivity. High valent iron-oxo intermediates could not be detected by UV-vis spectroscopy or ESI mass spectrometry. Rather, evidence suggest preferential ligand oxidation, in line with the relatively low selectivity and catalytic activity observed in the reactions.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

Mixed-ligand aminoalcohol-dicarboxylate copper(II) coordination polymers as catalysts for the oxidative functionalization of cyclic alkanes and alkenes

New copper(II) catalytic systems for the mild oxidative C–H functionalization of cycloalkanes and cycloalkenes were developed, which are based on a series of mixed-ligand aminoalcohol-dicarboxylate coordination polymers, namely [Cu2(μ-dmea)2(μ-nda)(H2O)2]n·2nH2O (1), [Cu2(μ-Hmdea)2(μ-nda)]n·2nH2O (2), and [Cu2(μ-Hbdea)2(μ-nda)]n·2nH2O (3) that bear slightly different dicopper(II) aminoalcoholate cores, as well as on a structurally distinct dicopper(II) [Cu2(H4etda)2(μ-nda)]·nda·4H2O (4) derivative [abbreviations: H2nda, 2,6-naphthalenedicarboxylic acid; Hdmea, N,N′-dimethylethanolamine; H2mdea, N-methyldiethanolamine; H2bdea, N-butyldiethanolamine; H4etda, N,N,N′,N′-tetrakis(2-hydroxyethyl)ethylenediamine]. Compounds 1–4 act as homogeneous catalysts in the three types of model catalytic reactions that proceed in aqueous acetonitrile medium under mild conditions (50–60°C): (i) the oxidation of cyclohexane by hydrogen peroxide to cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone, (ii) the oxidation of cycloalkenes (cyclohexene, cyclooctene) by hydrogen peroxide to a mixture of different oxidation products, and (iii) the single-pot hydrocarboxylation of cycloalkanes (cyclopentane, cyclohexane, cycloheptane, cyclooctane) by carbon monoxide, water, and a peroxodisulfate oxidant into the corresponding cycloalkanecarboxylic acids. The catalyst and substrate scope as well as some mechanistic features were investigated; the highest catalytic activity of 1–4 was observed in the hydrocarboxylation of cycloalkanes, allowing to achieve up to 50% total product yields (based on substrate).

Stereoselective Alkane Oxidation with meta-Chloroperoxybenzoic Acid (MCPBA) Catalyzed by Organometallic Cobalt Complexes

Cobalt pi-complexes, previously described in the literature and specially synthesized and characterized in this work, were used as catalysts in homogeneous oxidation of organic compounds with peroxides. These complexes contain pi-butadienyl and pi-cyclopentadienyl ligands: [(tetramethylcyclobutadiene)(benzene)cobalt] hexafluorophosphate, [(C₄Me₄)Co(C₆H₆)]PF₆ (1); diiodo(carbonyl)(pentamethylcyclopentadienyl)cobalt, Cp*Co(CO)I₂ (2); diiodo(carbonyl)(cyclopentadienyl)cobalt, CpCo(CO)I₂ (3); (tetramethylcyclobutadiene)(dicarbonyl)(iodo)cobalt, (C₄Me₄)Co(CO)₂I (4); [(tetramethylcyclobutadiene)(acetonitrile)(2,2′-bipyridyl)cobalt] hexafluorophosphate, [(C₄Me₄)Co(bipy)(MeCN)]PF₆ (5); bis[dicarbonyl(B-cyclohexylborole)]cobalt, [(C₄H₄BCy)Co(CO)₂]₂ (6); [(pentamethylcyclopentadienyl)(iodo)(1,10-phenanthroline)cobalt] hexafluorophosphate, [Cp*Co(phen)I]PF₆ (7); diiodo(cyclopentadienyl)cobalt, [CpCoI₂]₂ (8); [(cyclopentadienyl)(iodo)(2,2′-bipyridyl)cobalt] hexafluorophosphate, [CpCo(bipy)I]PF₆ (9); and [(pentamethylcyclopentadienyl)(iodo)(2,2′-bipyridyl)cobalt] hexafluorophosphate, [Cp*Co(bipy)I]PF₆ (10). Complexes 1 and 2 catalyze very efficient and stereoselective oxygenation of tertiary C–H bonds in isomeric dimethylcyclohexanes with MCBA: cyclohexanols are produced in 39 and 53% yields and with the trans/cis ratio (of isomers with mutual trans- or cis-configuration of two methyl groups) 0.05 and 0.06, respectively. Addition of nitric acid as co-catalyst dramatically enhances both the yield of oxygenates and stereoselectivity parameter. In contrast to compounds 1 and 2, complexes 9 and 10 turned out to be very poor catalysts (the yields of oxygenates in the reaction with cis-1,2-dimethylcyclohexane were only 5%–7% and trans/cis ratio 0.8 indicated that the oxidation is not stereoselective). The chromatograms of the reaction mixture obtained before and after reduction with PPh₃ are very similar, which testifies that alkyl hydroperoxides are not formed in this oxidation. It can be thus concluded that the interaction of the alkanes with MCPBA occurs without the formation of free radicals. The complexes catalyze oxidation of alcohols with tert-butylhydroperoxide (TBHP). For example, tert-BuOOH efficiently oxidizes 1-phenylethanol to acetophenone in 98% yield if compound 1 is used as a catalyst.

A heterometallic (Fe6Na8) cage-like silsesquioxane: synthesis, structure, spin glass behavior and high catalytic activity

The exotic “Asian Lantern” heterometallic cage silsesquioxane [(PhSiO_1.5)₂₀(FeO_1.5)₆(NaO_0.5)₈(n-BuOH)_9.6(C₇H₈)] (I) was obtained and characterized by X-ray diffraction, EXAFS, topological analyses and DFT calculation.

Design and synthesis of a dinucleating ligand system with varying terminal donor functions that provides no bridging donor and its application to the synthesis of a series of FeIII–μ-O–FeIII complexes

We have developed the dinucleating ligands H₄julia, susan, and H₄hilde^Me2 and present their μ-oxo diferric complexes.