Simultaneous chiral separation and determination of ephedrine alkaloids by MEKC-ESI-MS using polymeric surfactant I: Method development

Chiral Micellar Electrokinetic Chromatography

The potential of Micellar Electrokinetic Chromatography to achieve enantiomeric separations is reviewed in this article. The separation principles and the most frequently employed separation strategies to achieve chiral separations by Micellar Electrokinetic Chromatography are described. The use of chiral micellar systems alone or combined with other micellar systems or chiral selectors, as well as of mixtures of achiral micellar systems with chiral selectors is discussed together with the effect of different additives present in the separation medium. Indirect methods based on the derivatization of analytes with chiral derivatizing reagents and the use of achiral micelles are also considered. Preconcentration techniques employed to improve sensitivity and the main approaches developed to facilitate the coupling with Mass Spectrometry are included. The most recent and relevant methodologies developed by chiral Micellar Electrokinetic Chromatography and their applications in different fields are presented.

Establishing repeatability and ruggedness of chiral separations in micellar electrokinetic chromatography mass spectrometry: Combined use of covalently bonded capillary column and molecular micelles

Although micellar electrokinetic chromatography-mass spectrometry (MEKC-MS) using bare silica capillary filled with molecular micelles is an advantageous hyphenated technique for chiral analysis, it is still in the developmental stage. This is mainly because of the lower repeatability of retention time and peak area associated with the difficulty in controlling electroosmotic flow on bare silica capillaries. Besides the lower robustness and electrospray erosion of the fused-silica capillary tip, the lifetime is limited for 10-15 runs per capillary column. We have tested a new MEKC-MS method to eradicate this problem using a covalently bonded 2-acrylamido-2-methyl-1-propane-sulfonic acid (AMPS) column filled with free floating molecular micelles, polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL). Simultaneous enantiomeric separations and MS/MS detection of three β-blockers [atenolol (ATEN), metoprolol (METO) and, pindolol (PINDO)] was achieved within 25 min with improved column lifetime of at least 45-50 runs. Excellent repeatability of retention time was observed for β-blockers, as evidenced by the relative standard deviation of less than 2% and 3% for intra-capillary and inter-capillary column, respectively. The linear calibration range of both β-blockers was simultaneously established using enantiomers of PINDO as an internal standard. The limit of detection and the lower limit of quantitation were 0.2 μg/mL and 0.5 μg/mL, respectively, for both ATEN and METO. Acceptable recovery of the enantiomeric content of the commercial METO tablet (98-99.5%) and ATEN tablet (89-92.5%) were obtained with adequate system suitability for the precision of peak area (≤10% RSD) under optimum conditions. The developed MEKC-MS approach was extended, which provided broader repeatibility of chiral separation to a panel of primary, secondary and tertiary amines as well as one anionic chiral compound.

Chiral Capillary Electrophoresis-Mass Spectrometry: Developments and Applications in the Period 2010-2015: A Review

The sensitive detection of chiral compounds by capillary electrophoresis (CE) in biological samples remains a significant challenge and is currently considered a bottleneck in many chiral analysis projects. Chiral CE-MS can significantly improve the limit of detection and provide high sensitivity compared with chiral CE-UV. Chiral selectors such as modified cyclodextrins (CDs) and polymeric surfactants (a.k.a. molecular micelles, M_oM_s) in electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC) and capillary electrochromatography (CEC) have been developed to address the need for high sensitivity by CE-MS. However, several problems remain to be investigated to fully understand the potential of these hyphenation modes. This review provides introduction to major chiral CE-MS modes for the novice and highlights the important working principles of each mode of chiral CE-MS. Next, recent practical developments and progress in chiral CE-MS dating from January 2010 to September 2015 are described. The achievements in clinical and biomedical sciences using a variety of chiral selectors such as CDs and M_oM_s in EKC-MS, MEKC-MS and CEC-MS are discussed. Finally, conclusions and future prospects of CE-MS in chiral analysis are drafted.

Field-amplified sample injection in capillary electrophoresis with amperometric detection for the ultratrace analysis of diastereomeric ephedrine alkaloids

A coupling method of field-amplified sample injection (FASI) CE with amperometric detection is developed for ultratrace analysis of ephedrine alkaloids stereoisomers. FASI was introduced by injecting electrokinetically the sample solution for 10 s into the capillary filled with highly conductive background electrolyte (BGE). The diastereomeric selectivity and the detection sensitivity were improved by using borate buffer of high ionic strength as BGE. Parameters affecting FASI and CE separation were investigated to achieve the optimal conditions. Four analytes were separated within 15 min using 200 mmol/L borate buffer (pH 9.5) and separation voltage of +18 kV, with detection potential at +1.0 V (vs. Ag/AgCl) and carbon disc electrode as working electrode. Excellent linearity was observed between peak current and concentration of analytes in the range of 0.1-100 ng/mL. The LODs (S/N = 3) for (-)-ephedrine, (+)-pseudoephedrine, (-)-N-methylephedrine and (+)-N-methylpseudoephedrine were 39.3, 54.9, 30.8, and 44.1 pg/mL, respectively. The proposed method was successfully applied to the determination of alkaloids in Ephedra sinica, with results agreed well with HPLC method. Mean recoveries of 102.1-109.7% and RSDs less than 6% were found. And the merits of high sensitivity and selectivity, as well as a simple and stable operation, have been demonstrated.

Optimizing Mass Spectrometry Analyses: A Tailored Review on the Utility of Design of Experiments

Mass spectrometry (MS) has emerged as a tool that can analyze nearly all classes of molecules, with its scope rapidly expanding in the areas of post-translational modifications, MS instrumentation, and many others. Yet integration of novel analyte preparatory and purification methods with existing or novel mass spectrometers can introduce new challenges for MS sensitivity. The mechanisms that govern detection by MS are particularly complex and interdependent, including ionization efficiency, ion suppression, and transmission. Performance of both off-line and MS methods can be optimized separately or, when appropriate, simultaneously through statistical designs, broadly referred to as "design of experiments" (DOE). The following review provides a tutorial-like guide into the selection of DOE for MS experiments, the practices for modeling and optimization of response variables, and the available software tools that support DOE implementation in any laboratory. This review comes 3 years after the latest DOE review (Hibbert DB, 2012), which provided a comprehensive overview on the types of designs available and their statistical construction. Since that time, new classes of DOE, such as the definitive screening design, have emerged and new calls have been made for mass spectrometrists to adopt the practice. Rather than exhaustively cover all possible designs, we have highlighted the three most practical DOE classes available to mass spectrometrists. This review further differentiates itself by providing expert recommendations for experimental setup and defining DOE entirely in the context of three case-studies that highlight the utility of different designs to achieve different goals. A step-by-step tutorial is also provided.

Synthesis, characterization, and application of polysodium N-alkylenyl α-d-glucopyranoside surfactants for micellar electrokinetic chromatography-tandem mass spectrometry

Sugar-based ionic surfactants forming micelles are known to suppress ESI of various compounds due to decrease in surface tension upon micelle formation . For the first time, poly (sodium N-undecylenyl-α-d-glucopyranoside 4,6-hydrogen phosphate, (poly-α-d-SUGP) based surfactants with different chain lengths and head groups have been successfully synthesized, characterized, and applied as compatible chiral selector for MEKC-ESI-MS/MS. First, the effect of polymerization concentration of the monomer, α-d-SUGP, was evaluated by enantioseparation of one anionic compound (1,1'-binaphthyl-2,2'diyl-hydrogen phosphate) and one zwitterionic compound (dansylated phenylalanine) in MEKC-UV to find the optimum molar surfactant concentration for polymerization. Next, MEKC-UV and MEKC-MS were compared for the enantioseparation of 1,1'-binaphthyl-2,2'diyl-hydrogen phosphate. The influence of polymeric glucopyranoside based surfactant head groups and carbon chain lengths on chiral Rs was evaluated for two classes of cationic drugs (ephedrine alkaloids and β-blockers). Finally, enantioselective MEKC-MS of ephedrine alkaloids and β-blockers were profiled at their optimum pH 5.0 and 7.0, respectively, using 20 mM NH4 OAc, 25 mM poly-α-d-SUGP at 30 kV and 25°C under optimum spray chamber conditions. The LOD for most of the enantiomers ranges from 10 to 100 ng/mL with S/N of at least ≥3.0.

Recent methodological and instrumental development in MEKC

The review gives an update about the methodological and instrumental developments in micellar electrokinetic capillary chromatography as a type of CE analytical technique. Here, the last two years development of the technique are particularly presented. Recent approaches to improve sensitivity are discussed. Newly introduced concentration techniques and experimental methods for verification of the different mechanisms and processes of micellar electrokinetic chromatography analysis are highlighted. A theoretical model to explain changes in separation and electrophoretic mobility order of fully charged analytes are demonstrated. Modern approaches for improving compatibility of micellar electrokinetic capillary chromatography to mass spectrometry are also reported.

Differentiation of enantiomers by capillary electrophoresis

Capillary electrophoresis (CE) has matured to one of the major liquid phase enantiodifferentiation techniques since the first report in 1985. This can be primarily attributed to the flexibility as well as the various modes available including electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC), and microemulsion electrokinetic chromatography (MEEKC). In contrast to chromatographic techniques, the chiral selector is mobile in the background electrolyte. Furthermore, a large variety of chiral selectors are available that can be easily combined in the same separation system. In addition, the migration order of the enantiomers can be adjusted by a number of approaches. In CE enantiodifferentiations the separation principle is comparable to chromatography while the principle of the movement of the analytes in the capillary is based on electrophoretic phenomena. The present chapter will focus on mechanistic aspects of CE enantioseparations including enantiomer migration order and the current understanding of selector-selectand structures. Selected examples of the basic enantioseparation modes EKC, MEKC, and MEEKC will be discussed.

Application of polymeric surfactants in chiral micellar electrokinetic chromatography (CMEKC) and CMEKC coupled to mass spectrometry

The use of amino acid-based polymeric surfactants (a.k.a. molecular micelles) in chiral micellar electrokinetic chromatography (CMEKC) has been shown to be a successful separation mode for capillary electrophoresis (CE). In this mode, chiral compounds can be enantioseparated with high efficiency, high chiral selectivity, and versatility. This chapter describes the state-of-the art studies published in the past 5 years in CMEKC using polymeric surfactants. Recent trends in the compatibility of chiral polymeric surfactants with mass spectrometric (MS) detection suggest that this type of chiral selector may be the most promising ones for chiral CE-MS applications. The synthesis of new anionic and cationic MS-compatible polymeric surfactants and their utility in CMEKC and CMEKC-MS are demonstrated. Examples of how to run a typical CMEKC-MS experiment using univariate and multivariate optimization of CMEKC and MS parameters are discussed.

Chiral micellar electrokinetic chromatography-atmospheric pressure photoionization of benzoin derivatives using mixed molecular micelles

In the present work we report, for the first time, the successful on-line coupling of chiral MEKC (CMEKC) to atmospheric pressure photoionization MS (APPI-MS). Four structurally similar neutral test solutes (e.g. benzoin (BNZ) derivatives) were successfully ionized by APPI-MS. The mass spectra in the positive ion mode showed that the protonated molecular ions of BNZs are not the most abundant fragment ions. Simultaneous enantioseparation by CMEKC and on-line APPI-MS detection of four photoinitiators, hydrobenzoin, BNZ, benzoin methyl ether, benzoin ethyl ether, were achieved using an optimized molar ratio of mixed molecular micelle of two polymeric chiral surfactants (polysodium N-undecenoxy carbonyl-L-leucinate and polysodium N-undecenoyl-L,L-leucylvalinate). The CMEKC conditions, such as voltage, chiral polymeric surfactant concentration, buffer pH, and BGE concentration, were optimized using a multivariate central composite design (CCD). The sheath liquid composition (involving %v/v methanol, dopant concentration, electrolyte additive concentration, and flow rate) and spray chamber parameters (drying gas flow rate, drying gas temperature, and vaporizer temperature) were also optimized with CCD. Models built based on the CCD results and response surface method were used to analyze the interactions between factors and their effects on the responses. The final overall optimum conditions for CMEKC-APPI-MS were also predicted and found in agreement with the experimentally optimized parameters.

Recent advances of enantioseparations in capillary electrophoresis and capillary electrochromatography

A comprehensive survey of recent developments and applications of capillary electromigration techniques for enantioseparations from January 2006 to June 2010 is presented. The techniques include capillary electrophoresis, chip capillary electrophoresis and capillary electrochromatography. The separation principles and the chiral recognition mechanisms are discussed. Additionally, on-line preconcentrations in chiral capillary electrophoresis are also reviewed.

Determination of stimulants and narcotics as well as their in vitro metabolites by online CE-ESI-MS

A simple, rapid and sensitive CE-ESI-MS method for the simultaneous analysis of seven stimulants and narcotics (amphetamine, ephedrine, methadone, pethidine, tetracaine, codeine and heroin) was developed. The CE-ESI-MS experimental conditions were optimized as follows: 20 mmol/L ammonium acetate with pH 9.0 as running buffer, the separation voltage of 22 kV and the sheath liquid of isopropanol/water (1:1 v/v) containing 7.5 mmol/L acetic acid with 3.0 μL/min flow rate. Under the optimized conditions, the stimulants and narcotics were well separated within 4.6 min using a 70-cm length fused-silica capillary (50 μm id). The detection limits (S/N=3) of the CE-ESI-MS analysis were in the range of 0.40-1.0 ng/mL. Method repeatability of intra-day and inter-day was satisfactory. The recoveries obtained from the analysis of spiked urine samples were between 84.1 and 108%. The developed method was successfully applied for the simultaneous analysis of methadone, pethidine and codeine and their in vitro metabolites.

MEKC as a powerful growing analytical technique

This review summarizes the principle and the developments in MEKC in terms of separation power, sensitivity, and detection approaches more than 25 years after its appearance. Newly used surfactants are mentioned. Classical and new sample concentration techniques in MEKC are described. The different detection approaches in MEKC with advantages, limitations, and future prospects are also discussed. This review highlights the wider application of MEKC in different analytical fields. Various recent selected applications of this technique in different analytical fields are reported.

Electrokinetic chromatography and mass spectrometric detection using latex nanoparticles as a pseudostationary phase

The utility of novel latex nanoparticles as pseudostationary phases for electrokinetic chromatography with UV and mass spectrometric detection is demonstrated. The nanoparticles are synthesized using ab initio RAFT (reversible addition-fragmentation chain transfer) in emulsion polymerization, which yields small (63 nm) particles with a narrow size distribution, a hydrophobic core, and an ionic shell. The nanoparticles are shown to provide efficient and selective separations, with retention and separation selectivity dominated by hydrophobic interactions. The nanoparticles are highly retentive, such that they are effective at relatively low concentrations. Addition of the nanoparticles to the background electrolyte at these concentrations has a minor effect on the noise with UV detection, no measurable effect on the separation current, and minor effects on analyte ionization efficiency during electrospray ionization. The nanoparticles do not cause fouling or degradation of the electrospray-mass spectrometer interface even after several weeks of use. The combination of online sample preconcentration via sweeping and selective mass spectrometric detection yields low detection limits (10-16 ppb), particularly for more hydrophobic compounds.

Chiral CE-MS

This review article addresses the developments and applications of capillary electromigration methods coupled on-line with MS for chiral analysis. The multiple enantiomeric applications of this hyphenated technology are covered including chiral analysis of drugs, food compounds, pesticides, natural metabolites, etc. in different matrices such as plasma, urine, medicines, foods, etc. This work intends to provide an updated overview (including works published till September 2009) on the principal chiral applications carried out by CZE-MS, CEC-MS and MEKC-MS, discussing their main advantages and drawbacks in all their different areas of application as well as their foreseeable development in the not too distant future.

Multivariate approach for the enantioselective analysis in MEKC-MS: II. Optimization of 1,1'-binaphthyl-2,2'-diamine in positive ion mode

Enantiomeric separation and detection of 1,1'-binaphthyl-2,2'-diamine (BNA) has been successfully optimized by MEKC-ESI-MS using a polymeric surfactant polysodium N-undecenoxycarbonyl-L-leucinate (poly-L-SUCL) as a pseudostationary phase. In the first step, MEKC conditions were optimized by a five-factor three-level central composite design (CCD) of experiment. All five MEKC factors (buffer pH, percentage of ACN in the running buffer, concentration of surfactant, concentration of ammonium acetate (NH4OAc), and voltage) were found significant to the responses (measured as the chiral resolution and analysis time). The interactions between MEKC factors were further evaluated using a quadratic model equation which allowed the generation of 3-D response surface image to reach the optimum conditions. To obtain the best S/N, sheath liquid composition and spray chamber parameters were successfully optimized using the same strategy. Baseline enantiomeric resolution in less than 20 min and optimum MS signal of BNA enantiomers (S/N = 45 at 0.4 mg/mL) were ultimately achieved at the optimized conditions. The adequacy of the model was validated by experimental runs at the optimal predicted conditions. The predicted results were found to be in good agreement with the experimental data.

Multivariate approach for the enantioselective analysis in micellar electrokinetic chromatography-mass spectrometry. I. Simultaneous optimization of binaphthyl derivatives in negative ion mode

A mixture of two molecular micelles polysodium N-undecenoxy carbonyl-L-leucinate, (poly-L-SUCL) and polysodium N-undecanoyl leucylvalinate, (poly-L-SULV) was utilized in micellar electrokinetic chromatography-electrospray ionization-mass spectrometry (MEKC-ESI-MS) to simultaneously separate and detect enantiomers of binaphthyl derivatives. Separation parameters such as background buffer composition, voltage, temperature, and nebulizer pressure were optimized using a multivariate central composite design (CCD). Baseline enantioseparation for both analytes was achieved. The CCD was also used in the optimization of sheath liquid and spray chamber parameters to achieve optimum ESI-MS response. The results demonstrate that CCD is a powerful tool for the optimization of MEKC-MS parameters and the response surface model analysis can provide in-depth statistical understandings of the significant factors required to achieve maximum enantioresolution and ESI-MS sensitivity.

Chromatography in industry

This review focuses on the chromatography research that has been carried out within industry or in close cooperation with industry and that has been reported in the scientific literature between 2006 and mid-2008. Companies in the health care sector, such as pharmaceutical and biotechnology companies, are the largest contributors. Industrial research seems to take place in an open environment in cooperation with academia, peer companies, and institutions. Industry appears ready to embrace new technologies as they emerge, but they focus strongly on making chromatography work robustly, reliably, rapidly, and automatically. "Hyphenated" systems that incorporate on-line sample-preparation techniques and mass-spectrometric detection are the rule rather than the exception. Various multidimensional separation methods are finding numerous applications. Strategies aimed at speeding up the development of new chromatographic methods remain the focus of attention. Also, there is a clear trend toward exploring chromatographic methods for parallel processing along with other strategies for high-throughput analysis.

Electrokinetic chromatography with polymeric pseudostationary phases

Recent research and development efforts concerning polymeric pseudostationary phases (PSPs) for electrokinetic chromatography are reviewed. The introduction of new materials, characterization of structural effects on performance and selectivity, applications, and the use of polymeric PSPs with mass spectrometric detection are considered. Very interesting results concerning the effects of polymer structure have been reported. Significant developments have also been reported in the development of novel applications of polymeric PSPs, particularly for sample preconcentration using micellar affinity gradient focusing. The use of mass spectrometric detection with electrokinetic chromatography has seen significant development, and recent reports indicate that this is a robust and sensitive approach.

Simultaneous chiral separation of ephedrine alkaloids by MEKC-ESI-MS using polymeric surfactant II: Application in dietary supplements

Chiral MEKC-MS method was utilized for separation, identification, and quantitation of ten enantiomers of ephedrine and related compounds. Enantioselective separations of all ephedrine alkaloids were accomplished through a combination of polysodium N-undecenoxycarbonyl-L-leucinate (poly-L-SUCL) with 30% v/v ACN. Interestingly, the more hydrophilic stereoisomers were eluted later than the hydrophobic ones indicating that hydrogen bonding interactions are much stronger than hydrophobic interactions in the presence of ACN in chiral MEKC. The method was validated in terms of linearity, LOD, LOQ, precision and robustness. The method was finally used in the analysis of three standard reference materials (SRMs). Results of (-)-ephedrine ranged from 12.49 to 0.24 mg/g, for (+)-pseudoephedrine from 4.04 to 0.019 mg/g, for (-)-norephedrine from 0.36 to 0.0031 mg/g, for (+)-norpseudoephedrine from 0.68 to 0.0052 mg/g, for (-)-methylephedrine from 1.18 to 0.0092 mg/g and for (+)-methylpseudoephedrine from 0.086 to 0.00037 mg/g in the SRMs.