The presence of algae mitigates the toxicity of copper-based algaecides to a nontarget organism

Effect of three commercial algaecides on cyanobacteria and microcystin-LR: implications for drinking water treatment using activated carbon

Toxic cyanobacterial blooms in aquatic ecosystems are associated to both public health and environmental concerns worldwide. Depending on the treatment technologies used, the removal capacity of cyanotoxins by drinking water treatment plants (DWTPs) is not sufficient to reach safe levels in drinking water. Likewise, controlling these blooms with algaecide may impair the efficiency of DWTPs due to the possible lysis of cyanobacterial cells and consequent release of cyanotoxins. We investigated the effects of three commercial algaecides (cationic polymer, copper sulfate, and hydrogen peroxide) on the growth parameters of the cyanobacterium Microcystis aeruginosa and the release of microcystin-LR (MC-LR). The potential interference of each algaecide on the MC-LR removal by adsorption on activated carbon (AC) was also tested through adsorption isotherms and kinetics experiments. Most algaecides significantly decreased the cell density and biovolume of M. aeruginosa, as well as increased the release of MC-LR. Interestingly, the presence of the algaecides in binary mixtures with MC-LR affected the adsorption of the cyanotoxin. Relevant adsorption parameters (e.g., maximum adsorption capacity, adsorption intensity, and affinity between MC-LR and AC) were altered when the algaecides were present, especially in the case of the cationic polymer. Also, the algaecides influenced the kinetics (e.g., by shifting the initial adsorption and the desorption constant), which may directly affect the design and operation of DWTPs. Our study indicated that algaecides can significantly impact the fate and the removal of MC-LR in DWTPs when the adsorption process is employed, with important implications for the management and performance of such facilities.

Monitoring and control methods of harmful algal blooms in Chinese freshwater system: a review

Harmful algal blooms (HABs) are a worldwide problem with substantial adverse effects on the aquatic environment as well as human health, which have prompted researchers to study measures to stem and control them. Meanwhile, it is key to research and develop monitoring methods to establish early warning HABs. However, both the current monitoring methods and control methods have some shortcomings, making the field application limited. Thus, we need to improve current approaches for monitoring and controlling HABs efficiently. Based on the freshwater system features in China, we review various monitoring and control methods of HABs, summarize and discuss the problems with these methods, and propose the future development direction of monitoring and control HABs. Finally, we envision that it can combine physical, chemical, and biological methods to inhibit HAB expansion in the future, complementing each other with advantages. Further, we promise to establish a long-term strategy of controlling HABs with various algicidal bacteria co-cultivate for field applications in China. Efforts in studying algicidal bacteria must be increased to better control HABs and mitigate the risks of aquatic ecosystems and human health in China.

New is not always better: Toxicity of novel copper based algaecides to Daphnia magna

In this study, the effects of traditional copper (CuSO₄.5H₂O) and novel copper algaecides (Captain XTR, SeClear and Lake Guard Blue) were tested on Daphnia magna under acute (48 h) and chronic (21 d) exposure scenarios. The EC₅₀ values calculated in the acute tests were between 0.5 and 0.6 mg Cu L^-1 for all four compounds. Lake Guard Blue and CuSO₄.5 H₂O were more toxic than SeClear and Captain XTR. During the chronic test, the effects of SeClear (EC₅₀: 0.274 mg Cu L^-1) on reproduction and body length were larger than the effects of the other three copper-based algaecides (EC₅₀: 0.436 mg Cu L^-1 for CuSO₄.5 H₂O, 0.498 mg Cu L^-1 for Captain XTR, and 0.295 mg Cu L^-1 for Lake Guard Blue). Captain XTR had the strongest negative effect on body weight, whereas body weight was affected the least by CuSO₄.5 H₂O. The four copper compounds affected the age at first brood significantly, which was delayed by 1.8, 2.0, 2.3 and 3.2 days for Captain XTR, CuSO₄.5H₂O, Lake Guard Blue and SeClear, respectively. Intrinsic rate of population increase was lowest (0.145 d^-1) at the highest dosage in the SeClear treatments. Chemical equilibrium modelling revealed that most copper was chelated with EDTA present in the artificial medium used. These combined results indicate that the toxicity of the novel copper algaecide SeClear to D. magna is greater than that of traditional copper algaecide. Prior to each Cu application, tests on the effects of Cu compounds on the organisms being targeted should be done, taking into consideration the water chemistry.

Di-functional Cu2+-doped BiOCl photocatalyst for degradation of organic pollutant and inhibition of cyanobacterial growth

Photocatalytic oxidation of contaminants in water has recently gained extensive attentions. In this study, Cu²⁺-doped BiOCl microsphere photocatalysts were prepared using solvothermal method. The effects of Cu²⁺ doping ratio on the morphological structures and photoelectric and photocatalytic properties of BiOCl were studied in detail. Results showed that Cu²⁺ doping affected the particle size of BiOCl microspheres. The introduction of Cu²⁺ ions gradually increased the light absorption range and decreased the electron recombination rate of photocatalysts as shown by ultraviolet-visible diffuse reflection and photoluminescence spectra. The best doping ratio was 0.25 Cu²⁺-BiOCl, showing the highest photocatalytic activity for rhodamine B (14.25 time higher than BiOCl) and a good inhibition of algal growth. The main reactants in the photocatalytic system were·OH and h⁺ (electron holes). Density functional theory (DFT) calculations further demonstrated that the doping of Cu²⁺ ions made the photogenerated carriers in BiOCl easier to generate and ensured the charge was transferred more rapidly. In conclusion, a novel high-efficiency multifunctional photocatalyst is proposed for the efficient organic pollutants removal and algae growth inhibition from water.

Toxic effect of BDE-47 on the marine alga Skeletonema costatum: Population dynamics, photosynthesis, antioxidation and morphological changes

The toxic effects of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) on the marine alga Skeletonema costatum were studied, including the population dynamics, chlorophyll fluorescence characteristics, pigment content, superoxide dismutase (SOD) activity, malondialdehyde (MDA) content and morphology. High doses (200-600 μg L^-1) of BDE-47 significantly suppressed the population growth of S. costatum, with a 96 h EC₅₀ value of 293 μg L^-1. Photosynthetic parameters (F_v/F_m, rETR_max and Φ_PSⅡ) of photosystem II (PSII) were significantly inhibited with increasing BDE-47 concentrations. The chlorophyll c (chl c) concentration was also inhibited by exposure to BDE-47. In contrast, chl a and carotenoid concentrations were elevated after exposure to high concentrations of BDE-47 for 72 and 96 h. The SOD activity was generally higher at concentrations of 100-600 μg L^-1 than those of the control when the exposure time was less than 48 h. With increasing time, the SOD activity generally decreased, and significantly higher SOD activity only occurred in the treatment with high doses of BDE-47. High MDA contents occurred after exposure for 96 h in all BDE-47 treatments. With increasing BDE-47 concentrations, drastic deformation of the silicious valve and detachment of the strutted processes were found. In addition, drastic decreases in the BDE-47 concentration in culture medium indicated the bioaccumulation of BDE-47 by S. costatum. Our results revealed multiple responses of S. costatum to BDE-47 exposure, and indicated the potential risk of BDE-47 in the East China Sea based on these responses.

An ultra-sensitive selective fluorescent sensor based on a 3D zinc-tetracarboxylic framework for the detection and enrichment of trace Cu2+ in aqueous media

Herein, a novel and fluorescent zinc-organic framework sensor [Zn₃(μ₃-Hbptc)₂(μ₂-4,4'-bpy)₂(H₂O)₄]_n·2nH₂O (1) (H₄bptc = 2,3,3',4'-biphenyl tetracarboxylic acid, 4,4'-bpy = 4,4'-bipyridine) is synthesized and characterized, demonstrating its excellent fluorescence performance for Cu²⁺ detection and the enrichment of Cu²⁺ in aqueous media. The fluorescence intensity of 1 can be selectively quenched by Cu²⁺ in a linear range of Cu²⁺ concentrations of 0-0.7 μM. The limit of detection (LOD) value is as low as 32.4 nM, which is superior to those of most of the fluorescent sensors based on metal-organic frameworks (MOFs). It is also far below the maximum allowable concentration of Cu²⁺ in drinking water as defined by the U.S. Environmental Protection Agency (EPA) and the World Health Organization (WHO), so it is employed for the detection of Cu²⁺ in actual water samples. More importantly, the nature of the interaction between the active coordination site (COO^-) of 1 and Cu²⁺ determines the quenching mechanism, that is Cu²⁺ in the analyte is captured by MOF 1, which has been investigated by ICP, luminescence, UV-vis, XPS, and lifetime studies. Besides, the chemosensor shows regeneration performance without the loss of performance in five consecutive cycles. So MOF 1 is a simple and convenient probe used not only for the rapid detection but also for the enrichment of trace amounts of Cu²⁺ in aqueous media, and the application can be further extended to a variety of environmental and biological analysis processes.

Bench-scale assessment of three copper-based algaecide products for cyanobacteria management in source water

Three copper-based algaecide products were investigated for use in a drinking water source to address cyanobacteria growth. Bench-scale experiments were used to determine the optimal dose of each product given Lake Rockwell’s indigenous population and reservoir-specific characteristics. The optimal dose of Cutrine Ultra was determined to be a quarter dose (corresponding to 0.125 mg/L Cu) as it decreased 55% of the cyanobacteria population with limited release of microcystin and minimal rebound in the cyanobacteria population. The optimal dose for EarthTec was determined to be a half dose (i.e., 0.5 mg/L). The full dose was optimal for SeClear (1 mg/L Cu). The optimal doses had extracellular microcystin levels of 0.99 ± 0.09 µg/L (quarter dose Cutrine Ultra), 3.69 ± 0.43 µg/L (half dose EarthTec) and 0.92 ± 0.26 µg/L (full dose SeClear) by day 2. EarthTec and Cutrine Ultra facilitated a similar overall response, and the cyanobacteria population was predominately suppressed in the initial 2 days following treatment and then increased between 7 and 14 days after treatment (i.e., rebound). Both the suppression within the first 2 days and the rebound between 7 and 14 days after treatment were a function of dose (e.g., lower dose, larger increase in rebound). Although SeClear suppressed the cyanobacteria population during the initial 2 days after treatment (42,000 ± 3240 cells/mL at the baseline to 4822 ± 841), the cyanobacteria population rebounded significantly (p < 0.05) between 2 and 7 days after treatment.

Mechanisms of detoxification of high copper concentrations by the microalga Chlorella sorokiniana

Microalgae have evolved mechanisms to respond to changes in copper ion availability, which are very important for normal cellular function, to tolerate metal pollution of aquatic ecosystems, and for modulation of copper bioavailability and toxicity to other organisms. Knowledge and application of these mechanisms will benefit the use of microalgae in wastewater processing and biomass production, and the use of copper compounds in the suppression of harmful algal blooms. Here, using electron microscopy, synchrotron radiation-based Fourier transform infrared spectroscopy, electron paramagnetic resonance spectroscopy, and X-ray absorption fine structure spectroscopy, we show that the microalga Chlorella sorokiniana responds promptly to Cu2+ at high non-toxic concentration, by mucilage release, alterations in the architecture of the outer cell wall layer and lipid structures, and polyphosphate accumulation within mucilage matrix. The main route of copper detoxification is by Cu2+ coordination to polyphosphates in penta-coordinated geometry. The sequestrated Cu2+ was accessible and could be released by extracellular chelating agents. Finally, the reduction in Cu2+ to Cu1+ appears also to take place. These findings reveal the biochemical basis of the capacity of microalgae to adapt to high external copper concentrations and to serve as both, sinks and pools of environmental copper.

Mitigating the global expansion of harmful cyanobacterial blooms: Moving targets in a human- and climatically-altered world

Cyanobacterial harmful algal blooms (CyanoHABs) are a major threat to human and environmental health. As global proliferation of CyanoHABs continues to increase in prevalence, intensity, and toxicity, it is important to identify and integrate the underlying causes and controls of blooms in order to develop effective short- and long-term mitigation strategies. Clearly, nutrient input reductions should receive high priority. Legacy effects of multi-decadal anthropogenic eutrophication have altered limnetic systems such that there has been a shift from exclusive phosphorus (P) limitation to nitrogen (N) limitation and N and P co-limitation. Additionally, climate change is driving CyanoHAB proliferation through increasing global temperatures and altered precipitation patterns, including more extreme rainfall events and protracted droughts. These scenarios have led to the "perfect storm scenario"; increases in pulsed nutrient loading events, followed by persistent low-flow, long water residence times, favoring bloom formation and proliferation. To meet the CyanoHAB mitigation challenge, we must: (1) Formulate watershed and airshed-specific N and P input reductions on a sliding scale to meet anthropogenic and climatic forcings. (2) Develop CyanoHAB management strategies that incorporate current and anticipated climatic changes and extremes. (3) Make nutrient management strategies compatible with other physical-chemical-biological mitigation approaches, such as altering freshwater flow and flushing, dredging, chemical applications, introduction of selective grazers, etc. (4) Target CyanoHAB toxin production and developing management approaches to reduce toxin production. (5) Develop broadly applicable long-term strategies that incorporate the above recommendations.

Biomass of the Cyanobacterium Lyngbya wollei Alters Copper Algaecide Exposure and Risks to a Non-target Organism

Nuisance algal infestations are increasing globally in distribution and frequency. Copper-based algaecides are routinely applied to control these infestations, though there is an ever-present concern of risks to non-target species. This research evaluated risks associated with a commonly applied chelated copper algaecide (Captain® XTR; SePRO Corporation) to a sentinel non-target species (Daphnia magna) and further assessed alteration of the exposure and toxicity when a nuisance mat-forming cyanobacterium, Lyngbya wollei, was present in exposures. Aqueous copper concentrations in treatments with algae significantly decreased within 1 h after treatment and averaged 57.5% of nominal amended Cu through the experiment duration. The 48 h LC₅₀ values were 371 µg Cu/L with no algae present in exposures and increased significantly to 531 µg Cu/L when L. wollei was simultaneously exposed. This research provides information on the short-term fate of copper and hazard assessment by incorporating targeted binding ligands, as present in operational treatments.