The primacy of octacalcium phosphate collagen composites in bone regeneration

Octacalcium phosphate collagen composite for periodontal regeneration in a canine one-wall intrabony defect

OBJECTIVE

This study aimed to evaluate the regenerative capacities of octacalcium phosphate collagen composite (OCP/Col) in one-wall intrabony defects in dogs. The background data discuss the present state of the field: No study has assessed the efficacy of OCP/Col for periodontal regeneration therapy despite the fact that OCP/Col has proved to be efficient for bone regeneration.

METHODS

In six beagle dogs, the mandibular left third premolars were extracted 12 weeks before the experimental surgery. Standardized bone defects (5 mm in height and 4 mm in width) were simulated on the distal surface of the second premolars and mesially on the fourth premolars. The defect was filled with either OCP/Col (experimental group) or left empty (control group). Histological and histomorphometric characteristics were compared 8 weeks after surgery.

RESULTS

No infectious or ankylotic complications were detected at any of the tested sites. The experimental group exhibited a significantly greater volume, height, and area of newly formed bone than the control group. The former also showed a greater height of the newly formed cementum than the latter, although the results were not statistically significant. The newly formed periodontal ligaments were inserted into newly formed bone and cementum in the experimental group.

CONCLUSION

OCP/Col demonstrated high efficacy for bone and periodontal tissue regeneration that can be successfully applied for one-wall intrabony defects.

Comparative Analysis of Bone Regeneration According to Particle Type and Barrier Membrane for Octacalcium Phosphate Grafted into Rabbit Calvarial Defects

This animal study was aimed to evaluate the efficacy of new bone formation and volume maintenance according to the particle type and the collagen membrane function for grafted octacalcium phosphate (OCP) in rabbit calvarial defects. The synthetic bone substitutes were prepared in powder form with 90% OCP and granular form with 76% OCP, respectively. The calvarial defects were divided into four groups according to the particle type and the membrane application. All specimens were acquired 2 weeks (n = 5) and 8 weeks (n = 5) after surgery. According to the micro-CT results, the new bone volume increased at 2 weeks in the 76% OCP groups compared to the 90% OCP groups, and the bone volume ratio was significantly lower in the 90% OCP group after 2 weeks. The histomorphometric analysis results indicated that the new bone area and its ratio in all experimental groups were increased at 8 weeks except for the group with 90% OCP without a membrane. Furthermore, the residual bone graft area and its ratio in the 90% OCP groups were decreased at 8 weeks. In conclusion, all types of OCP could be applied as biocompatible bone graft materials regardless of its density and membrane application. Neither the OCP concentration nor the membrane application had a significant effect on new bone formation in the defect area, but the higher the OCP concentration, the less graft volume maintenance was needed.

Radiographic and Histomorphometric Evaluation of Sinus Floor Augmentation Using Biomimetic Octacalcium Phosphate Alloplasts: A Prospective Pilot Study

This prospective single-arm clinical study aimed to radiographically and histomorphometrically evaluate the efficacy of the lateral approach for sinus floor elevation (LSFE) using biomimetic octacalcium phosphate (OCP) synthetic bone graft (Bontree^®). LSFE using Bontree^® was performed on 10 patients (15 implant placement sites) willing to undergo implant surgery, followed by implant placements after 6 months of the healing period. The vertical bone height (VBH) and Hounsfield unit (HU) values at each implant placement site were evaluated radiographically using cone-beam computed tomography at baseline immediately after surgery (T1) and 6 months after surgery (T2). A histomorphometric evaluation of the bone core biopsy specimen was also performed. The mean VBH and HU changes at all sites included a decrease by 0.91 mm and a statistically significant increase by 431.86, respectively, from T1 to T2. The mean ratio of the newly formed bone (23.34% ± 10.63%) was greater than that of the residual bone graft (19.09% ± 8.74%), indicating that Bontree^® is effective for new bone formation. This pilot study suggests that Bontree^® is a promising bone substitute for LSFE.

A Follow-Up Study on the Clinical Outcomes of Alveolar Reconstruction Using Octacalcium Phosphate Granules and Atelocollagen Complex

PURPOSE

To observe the long-term postoperative bone formation and eruption of adjacent teeth after octacalcium phosphate granule and atelocollagen complex (OCP/Col) grafting in the treatment of alveolar cleft of patients with unilateral cleft lip with or without cleft palate (UCL ± P).

METHODS

Four patients with UCL ± P who underwent OCP/Col grafting (OCP group), and 55 patients with UCL ± P who underwent autologous bone grafting (AB group) were enrolled in this study. OCP/Col or autologous bone grafting was performed before the eruption of canines or lateral incisors in mixed dentition, followed by orthodontic management. Patients in the OCP group underwent radiography before and after surgery at 1, 2, 3, 6, and over 30 months postoperatively. The volume and area of the bony defect in the alveolar cleft area were compared between the OCP and AB groups before and after 6 months of surgery.

RESULTS

The bone bridge in all patients in the OCP/Col group was successfully formed, and by 6 months postoperatively, the permanent teeth adjacent to the alveolar cleft had erupted at the site of the OCP/Col complex graft. Comparison of the pre- and postoperative bone defects between the 2 groups revealed almost the same extent of bone bridge formation.

CONCLUSIONS

OCP/Col grafting could be considered as an alternative to autologous bone grafting as it yielded successful bone bridge formation and facilitated permanent tooth eruption.

Octacalcium Phosphate Bone Substitute (Bontree®): From Basic Research to Clinical Case Study

Bone grafts used in alveolar bone regeneration can be categorized into autografts, allografts, xenografts, and synthetic bones, depending on their origin. The purpose of this study was to evaluate the effect of a commercialized octacalcium phosphate (OCP)-based synthetic bone substitute material (Bontree®) in vitro, in vivo, and in clinical cases. Material characterization of Bontree® granules (0.5 mm and 1.0 mm) using scanning electron microscopy and X-ray diffraction showed that both 0.5 mm and 1.0 mm Bontree® granules were uniformly composed mainly of OCP. The receptor activator of NF-κB ligand (RANKL) and alkaline phosphatase (ALP) activities of MG63 cells were assessed and used to compare Bontree® with a commercial biphasic calcium phosphate ceramic (MBCP+TM). Compared with MBCP+TM, Bontree® suppressed RANKL and increased ALP activity. A rabbit tibia model used to examine the effects of granule size of Bontree® grafts showed that 1.0 mm Bontree® granules had a higher new bone formation ability than 0.5 mm Bontree® granules. Three clinical cases using Bontree® for ridge or sinus augmentation are described. All eight implants in the three patients showed a 100% success rate after 1 year of functional loading. This basic research and clinical application demonstrated the safety and efficacy of Bontree® for bone regeneration.

Teriparatide with octacalcium phosphate collagen composite stimulates osteogenic factors

Octacalcium phosphate and collagen composite (OCPcol) promotes osteogenic differentiation and angiogenesis, thereby enhancing bone regeneration. Although a newly developed freeze-dried composite of OCPcol and teriparatide (OCPcolTPTD) reinforced bone regeneration more than OCPcol, the mechanism of bone regeneration remains unresolved. Here, disks containing OCPcolTPTD, OCPcol, or β-tricalcium phosphate (β-TCP) col were inserted into rodents with calvarial bone defects, before euthanasia 4 weeks later. Immunohistochemical and histochemical analyses were performed on bone samples to evaluate bone matrix development, angiogenesis, and osteoclast and osteoblast localization. In the OCPcolTPTD and OCPcol groups, bone regeneration was observed at the surface of calvarial dura mater and around acidophilic granular cells with abundant collagenous fiber-containing cells. Furthermore, the newly formed bone in the OCPcolTPTD group showed a larger total area and individual separated area than the other groups. Various osteogenic proteins were detected in the regenerated bone and peri-bone tissues via histochemistry and immunohistochemistry. Although the expression of several osteogenic biomarkers in the OCPcolTPTD group after 4 weeks of implantation was significantly lower than that in the OCPcol group, new bone formation by OCPcolTPTD in the center of the defect, where bone regeneration is difficult, tended to be superior to that by OCPcol. These results suggest that OCPcolTPTD enhanced bone regeneration more evenly and homogenously than OCPcol.

Segmental Bone Reconstruction by Octacalcium Phosphate Collagen Composites with Teriparatide

Octacalcium phosphate and collagen composite (OCPcol) demonstrated superior bone regeneration and has been commercialized recently in Japan. Teriparatide (TPTD) is a bioactive recombinant form of parathyroid hormone that is approved for osteoporosis treatment. Because mandibular bone reconstruction after segmental resection is a key clinical problem, it was examined whether single-dose local administration of OCPcol with TPTD can affect recovery after this procedure. OCPcol was prepared, and a commercially available hydroxyapatite and collagen composite (HAPcol) was used as a control. A 15 mm length segmental bone defect was made in the mandibular region of male beagle dogs. The experimental animals were divided in four groups. OCPcol treated with TPTD (OCPcol + TPTD), OCPcol, HAPcol treated with TPTD (HAPcol + TPTD), or HAPcol was implanted into the defect. The radiopaque areas of the implanted site were measured and statistically analyzed, and histological examination was performed after 6 months. The value of radiopaque area in total region of OCPcol + TPTD was highest (90.8 ± 7.3 mm²), followed in order by OCPcol (49.3 ± 21.8 mm²), HAPcol + TPTD (10.6 ± 2.3 mm²), and HAPcol (6.4 ± 2.3 mm²), and that of OCPcol + TPTD was significantly higher than that of HAPcol + TPTD or HAPcol. All segmented mandibles of OCPcol + TPTD and a part of those of OCPcol were bridged with newly formed bone, whereas no bone bridges were observed in HAPcol + TPTD or HAPcol. These results suggested that OCPcol treated with TPTD enabled bone reconstruction after segmental mandibular resection more than other three groups.

Influence of pre-freezing conditions of octacalcium phosphate and collagen composite for reproducible appositional bone formation

Even though conventionally prepared octacalcium phosphate and collagen composite (OCP/Col) has exhibited excellent bone regeneration and has recently been commercialized for treating bone defects, reproducible appositional bone formation with OCP/Col has never been achieved. The present study investigated whether appositional bone formation could be achieved by altering the density of OCP/Col and applying liquid nitrogen during the preparation of OCP/Col. The prepared OCP/Col disks had eight variations and were divided into categories according to four different type of densities (1.0, 1.3, 1.7, and 2.0) of OCP/Col and two different pre‐freezing conditions of gas phase (G group: −80°C) and liquid phase (L group: −196°C). These disks were implanted into subperiosteal pockets in rodent calvaria, five samples per each eight variations. Radiomorphometric analysis was conducted at 4 and 12 weeks after implantation, and histological analysis was conducted at 12 weeks after implantation. OCP/Col samples in the L group tended to retain their height and shape and had enhanced appositional bone formation, whereas OCP/Col samples in the G group tended to lose their height and shape and had limited appositional bone formation. The appositional bone formation increased along with growing density of OCP/Col, and L2.0 demonstrated higher appositional bone formation than other samples. These results suggest that the pre‐freezing conditions and densities of OCP/Col affect the appositional bone formation.

Bone augmentation by octacalcium phosphate and collagen composite coated with poly-lactic acid cage

Objective

Although octacalcium phosphate and collagen composite (OCP/Col) has demonstrated excellent bone regeneration, it has never achieved bone augmentation. The present study investigated whether it could be enabled by OCP/Col disks treated with parathyroid hormone (PTH) and covered with a poly‐lactic acid (PLA) cage.

Materials and methods

The prepared OCP/Col disks with three different types of PLA cages (no hole, one large hole, several small holes) were implanted into subperiosteal pockets in rodent calvaria. Histological, and histomorphometric analyses were conducted at 12 weeks after implantation.

Results

Implants with all PLA cage variants achieved sufficient bone augmentation, and analyses showed that new bone was formed from the original bone and along the PLA cage. While the PLA cage variant with no holes sporadically evoked new bone formation even at the central area of the roof of the PLA cage, the PLA cage variants with holes had no new bone in the area of the hole or beneath the periosteum.

Conclusions

These results suggest that sufficient bone augmentation could be achieved by treating the OCP/Col disks with PTH and covering them with a PLA cage, and periosteum might not have been involved in the bone formation in this experiment.

Octacalcium phosphate collagen composite (OCP/Col) enhance bone regeneration in a rat model of skull defect with dural defect

Cranial bone defects are a major issue in the field of neurosurgery, and improper management of such defects can cause cosmetic issues as well as more serious infections and inflammation. Several strategies exist to manage these defects clinically, but most rely on synthetic materials that are prone to complications; thus, a bone regenerative approach would be superior. We tested a material (octacalcium phosphate collagen composite [OCP/Col]) that is known to enhance bone regeneration in a skull defect model in rats. Using a critical-sized rat skull defect model, OCP/Col was implanted in rats with an intact dura or with a partial defect of the dura. The results were compared with those in a no-treatment group over the course of 12 weeks using computed tomographic and histological analysis. OCP/Col enhanced bone regeneration, regardless of whether there was a defect of the dura. OCP/Col can be used to treat skull defects, even when the dura is injured or removed surgically, via bone regeneration with enhanced resorption of OCP/Col, thus limiting the risk of infection greatly.

Biofunctionalization of metallic implants by calcium phosphate coatings

Metallic materials have been extensively applied in clinical practice due to their unique mechanical properties and durability. Recent years have witnessed broad interests and advances on surface functionalization of metallic implants for high-performance biofunctions. Calcium phosphates (CaPs) are the major inorganic component of bone tissues, and thus owning inherent biocompatibility and osseointegration properties. As such, they have been widely used in clinical orthopedics and dentistry. The new emergence of surface functionalization on metallic implants with CaP coatings shows promise for a combination of mechanical properties from metals and various biofunctions from CaPs. This review provides a brief summary of state-of-art of surface biofunctionalization on implantable metals by CaP coatings. We first glance over different types of CaPs with their coating methods and in vitro and in vivo performances, and then give insight into the representative biofunctions, i.e. osteointegration, corrosion resistance and biodegradation control, and antibacterial property, provided by CaP coatings for metallic implant materials.

Octacalcium phosphate collagen composite stimulates the expression and activity of osteogenic factors to promote bone regeneration

Objective

This study investigated the bone regenerative properties of an octacalcium phosphate collagen composite (OCP/Col) in a rat calvarial bone defect model.

Design

An OCP/Col or β‐tricalcium phosphate (β‐TCP)/Col disk was implanted into the critical‐sized calvarial defects and fixed 2 or 4 weeks later. The radiopacity of defects was examined after disk implantation by the radiographic examination and micro‐computed tomography (μ‐CT). Immunohistochemical and histochemical analyses were carried out to assess the bone matrix maturation, neovascularization, and osteoclast and osteoblast distribution in the neonatal bone.

Results

Radiographic and μ‐CT examination of the area of implanted OCP/Col indicated the newly formed bone and no difference from those of the original bone. Osteopontin, osteocalcin, Runt‐related transcription factor 2, type 1 collagen, vascular endothelial growth factor, and alkaline phosphatase or tartrate‐resistant acid phosphatase in the newly formed calvarial bone and the surrounding connective tissue were detected by immunohistochemistry and histochemistry. Biomarker expression was not significantly elevated at the defect site; the area of which was calculated by dividing the distance from the healthy bone margin or calvarium and dura mater surface. There was no difference in the expression of these biomarkers in the OCP/Col group at 2 and 4 weeks after surgery. In addition, the expression levels of all markers were higher in the OCP/Col group than in the β‐TCP/Col group at 2 and 4 weeks after surgery.

Conclusions

The OCP/Col as a bone regeneration material not only exhibits osteoconductive activity that is dependent on residual healthy bone tissue, but also has osteoinductive capacity, which promotes angiogenesis and osteogenic cell invasion from host tissue into the bone defect.

Bone regeneration by freeze-dried composite of octacalcium phosphate collagen and teriparatide

OBJECTIVE

Octacalcium phosphate (OCP) and collagen (col) composite (OCPcol) demonstrated superior bone regeneration properties, and its commercialization appears to be forthcoming. As a practical medical material for new combination products, we developed a freeze-dried composite with OCPcol and teriparatide (TPTD) (OCPcolTPTDf), and investigated its bone regenerative properties.

MATERIALS AND METHODS

A disk of OCPcol was made by mixing OCP granules and atelocollagen for medical use. Then, OCPcolTPTDf was prepared by impregnation of the OCPcol disk with 1.0 or 0.1 µg of TPTD solution (OCPcolTPTDf 1.0 and OCPcolTPTDf 0.1, respectively) followed by lyophilization. In vitro release profiles of TPTD from OCPcolTPTDf were determined using an enzyme-linked immunosorbent assay. Implantation of OCPcolTPTDf or OCPcol was carried out for a rat critical-sized calvarial defect. And five defects in each group were collected after 12 weeks of implantation.

RESULTS

The retention-release profiles of TPTD from OCPcolTPTDf supported a higher degree of retention of TPTD. Radiographic, histological, and histomorphometric examinations indicated that regenerated bone was filled in most of the defects of the OCPcolTPTDf. Additionally, the OCPcolTPTDf groups showed significantly enhanced bone regeneration compared with the OCPcol group.

CONCLUSIONS

These results suggested that this newly developed bone regenerative composite could be a practical medical material.

Single-dose local administration of teriparatide with a octacalcium phosphate collagen composite enhances bone regeneration in a rodent critical-sized calvarial defect

Octacalcium phosphate and collagen composite (OCP/Col) achieves stable bone regeneration without cell transplantation in preclinical studies. Recently, a sponsor-initiated clinical trial was conducted to commercialize the material. The present study investigated bone regeneration by OCP/Col with the single local administration of teriparatide (parathyroid hormone 1-34; TPTD). OCP/Col was prepared by mixing sieved granules of OCP and atelocollagen for medical use and a disk was molded. After the creation of a rodent critical-sized calvarial defect, OCP/Col or OCP/Col with dripped TPTD solution (1.0 or 0.1 µg; OCP/Col/TPTDd1.0 or OCP/Col/TPTDd0.1) was implanted into the defect. Six defects in each group were fixed 12 weeks after implantation. Radiographic examinations indicated that radiopaque figures in defects treated with OCP/Col with TPTD (OCP/Col/TPTDd) occupied a wider range than those treated with OCP/Col. Histological results demonstrated that most of the defect in OCP/Col/TPTDd was filled with newly formed bone. A histomorphometrical examination indicated that the percentage of newly formed bone was significantly higher in the defects of OCP/Col/TPTDd 1.0 (53.6 ± 4.3%) and OCP/Col/TPTDd 0.1 (52.2 ± 7.4%) than in those of OCP/Col (40.1 ± 8.4%), whereas no significant differences were observed between OCP/Col/TPTDd1.0 and OCP/Col/TPTDd0.1. These results suggest that OCP/Col with the single local administration of TPTD enhances bone regeneration in a rodent calvarial critical-sized bone defect. © 2017 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1851-1857, 2018.

Composite biopolymers for bone regeneration enhancement in bony defects

For the past century, various biomaterials have been used in the treatment of bone defects and fractures. Their role as potential substitutes for human bone grafts increases as donors become scarce. Metals, ceramics and polymers are all materials that confer different advantages to bone scaffold development. For instance, biocompatibility is a highly desirable property for which naturally-derived polymers are renowned. While generally applied separately, the use of biomaterials, in particular natural polymers, is likely to change, as biomaterial research moves towards mixing different types of materials in order to maximize their individual strengths. This review focuses on osteoconductive biocomposite scaffolds which are constructed around natural polymers and their performance at the in vitro/in vivo stages and in clinical trials.

Clinical safety and efficacy of implantation of octacalcium phosphate collagen composites in tooth extraction sockets and cyst holes

It was demonstrated that octacalcium phosphate collagen composite achieved notable bone regeneration in bone defects in preclinical studies. On the basis of the research results, an investigator-initiated exploratory clinical trial was conducted after approval from a local Institutional Review Board. This clinical study was performed as a single-arm non-randomized intervention study. Octacalcium phosphate collagen composite was implanted into a total of 10 cases of alveolar bone defects after tooth extractions and cystectomy. Safety assessment was performed in terms of the clinical course and several consecutive laboratory examinations, and sequential radiographs were used for efficacy assessment. All participants uneventfully completed the clinical trial without major problems in their general condition. Postoperative wound swelling was observed, as also commonly seen in tooth extraction or cystectomy. Although no serious liver dysfunction, renal dysfunction, electrolyte imbalance, or abnormal urinalysis results were recognized, the number of white blood cells and C-reactive protein level temporarily increased after the operation. An increase in radiopacity in the octacalcium phosphate collagen composite–implanted site was observed in all cases. Finally, the border between the original bone and the octacalcium phosphate collagen composite–implanted site became indistinguishable. These results suggest that octacalcium phosphate collagen composite could be utilized safely in clinical situations in the future.

The Regenerated Bone Quality by Implantation of Octacalcium Phosphate Collagen Composites in a Canine Alveolar Cleft Model

Objective

Synthetic octacalcium phosphate and porcine atelocollagen composites significantly enhanced bone regeneration more than β-tricalcium phosphate collagen composite and hydroxyapatite collagen composite in a rat cranial defect model. However, the long-term stability and quality of octacalcium phosphate collagen (OCP/Col) composites–derived regenerated bone, when implanted in a canine alveolar cleft model, have yet to be elucidated. The present study investigated the longterm stability and quality of bone regenerated by OCP/Col.

Design

Disks of OCP/Col or collagen were implanted in a canine alveolar-cleft model (n = 6). Then, bone regeneration in the implanted areas was investigated macroscopically, radiographically, and histologically at 10 months after implantation. In addition, three-dimensional quantitative images of regenerated bone were analyzed by microcomputed tomography.

Results

Macroscopically, the OCP/Col treated alveolus was clearly augmented, and radio-opacity in the OCP/Col implanted area was comparable to that of the original alveolus bone. On histological analysis, the area was mostly filled with newly formed bone, and a few granules of implanted OCP/Col were enclosed in it. In the microcomputed tomography analysis, the regenerated bone volume in the OCP/Col group was larger than that in the collagen group. OCP/Col–derived bone consisted of outer cortical and inner cancellous structure with dense trabeculae and seemed like the original bone structure.

Conclusions

OCP/Co composites could be a useful bone regenerative material to substitute for autogenous bone because their implantation could elicit high bone regeneration and active structural reconstitution.

First clinical application of octacalcium phosphate collagen composite in human bone defect

We have previously demonstrated that octacalcium phosphate (OCP) collagen composite (OCP/collagen) promotes bone regeneration in a critical-sized bone defect of a rodent or canine model. This study was designed to investigate the bone regeneration of OCP/collagen in human bone defect as a first clinical trial. Two patients who had a radicular cyst or apical periodontitis consented to participate in our clinical study, and OCP/collagen was implanted into the defects after operation. Radiographic examination showed effective bone healing in each bone defect at 3 or 6 months. Likewise, computed tomography value significantly increased after implantation. Postoperative wound healing was uneventful, and neither infection nor allergic reaction against OCP/collagen was observed for the entire period. This study demonstrated that OCP/collagen would be safely used and enhanced bone regeneration in human bone defects. To reinforce the efficacy of OCP/collagen as a bone substitute material, it should be compared with other suitable comparators in the future.

Effect of addition of hyaluronic acids on the osteoconductivity and biodegradability of synthetic octacalcium phosphate

The present study was designed to investigate whether three sodium hyaluronic acid (HyA) medical products, Artz(®), Suvenyl(®) and a chemically modified derivative of sodium HyA Synvisc(®), can be used as suitable vehicles for an osteoconductive octacalcium phosphate (OCP). OCP granules (300-500 μm diameter) were mixed with these sodium HyAs with molecular weights of 90 × 10(4) (Artz(®)), 190 × 10(4) (Suvenyl(®)) and 600 × 10(4) (Synvisc(®)) (referred to as HyA90, HyA190 and HyA600, respectively). OCP-HyA composites were injected using a syringe into a polytetrafluoroethylene ring, placed on the subperiosteal region of mouse calvaria for 3 and 6 weeks, and then bone formation was assessed by histomorphometry. The capacity of the HyAs for osteoclast formation from RAW264 cells with RANKL was examined by TRAP staining in vitro. Bone formation was enhanced by the OCP composites with HyA90 and HyA600, compared to OCP alone, through enhanced osteoclastic resorption of OCP. HyA90 and HyA600 facilitated in vitro osteoclast formation. The results suggest that the osteoconductive property of OCP was accelerated by the HyAs-associated osteoclastic resorption of OCP, and therefore that HyA/OCP composites are attractive bone substitutes which are injectable and bioactive materials.

Recent developments of functional scaffolds for craniomaxillofacial bone tissue engineering applications

Autogenous bone grafting remains a gold standard for the reconstruction critical-sized bone defects in the craniomaxillofacial region. Nevertheless, this graft procedure has several disadvantages such as restricted availability, donor-site morbidity, and limitations in regard to fully restoring the complicated three-dimensional structures in the craniomaxillofacial bone. The ultimate goal of craniomaxillofacial bone reconstruction is the regeneration of the physiological bone that simultaneously fulfills both morphological and functional restorations. Developments of tissue engineering in the last two decades have brought such a goal closer to reality. In bone tissue engineering, the scaffolds are fundamental, elemental and mesenchymal stem cells/osteoprogenitor cells and bioactive factors. A variety of scaffolds have been developed and used as spacemakers, biodegradable bone substitutes for transplanting to the new bone, matrices of drug delivery system, or supporting structures enhancing adhesion, proliferation, and matrix production of seeded cells according to the circumstances of the bone defects. However, scaffolds to be clinically completely satisfied have not been developed yet. Development of more functional scaffolds is required to be applied widely to cranio-maxillofacial bone defects. This paper reviews recent trends of scaffolds for crania-maxillofacial bone tissue engineering, including our studies.

The effect of alendronate doped calcium phosphates on bone cells activity

This study demonstrates that octacalcium phosphate (OCP) is a suitable substrate for alendronate local action towards bone cells. The results of the structural, spectroscopic, and microscopic investigation show that soaking OCP into alendronate solutions provoked the deposition of long crystalline rod-shaped formations, most likely a calcium alendronate complex, onto the calcium phosphate. The amount of alendronate loaded onto OCP increased as a function of the bisphosphonate concentration in solution. Osteoblast and osteoclast response was tested in single and in co-cultures on OCP containing 6.4 wt.% AL (OCP-AL), and for comparison on hydroxyapatite (HA) containing a similar amount (5.9 wt.%) of AL (HA-AL), as well as on pure OCP and HA as reference materials. Alendronate loaded materials displayed a beneficial effect on osteoblast activity and differentiation, whereas they inhibited osteoclast proliferation and differentiation. Crosstalking between osteoblast-like MG63 cells and human osteoclasts enhanced their response to alendronate. Moreover, OCP displayed a greater stimulating effect than HA on osteoblast differentiation, and AL promotion of osteoblast differentiation and mineralization was enhanced in OCP-AL with respect to HA-AL.

Bone formation using β-tricalcium phosphate/carboxymethyl-chitin composite scaffold in rat calvarial defects

OBJECTIVE

The aim of the present study was to evaluate the effects of β-tricalcium phosphate/carboxymethyl-chitin material (β-TCP/CM-chitin) on bone formation in rat calvarial defects.

STUDY DESIGN

Eighteen animals surgically received 2 calvarial defects (5 mm) bilaterally in each parietal bone. β-TCP/CM-chitin was implanted in one side of each defect, and the contralateral side of the defect was left empty as a control. The animals were humanely killed at 4, 8, and 12 weeks after surgery for histologic evaluation.

RESULTS

New bone formation in the β-TCP/CM-chitin group was significantly greater than that in the control group throughout the healing periods (P < .05). β-TCP/CM-chitin was remarkably resorbed 12 weeks after surgery.

CONCLUSIONS

These results indicate that β-TCP/CM-chitin is useful as a scaffold for bone formation.

Octacalcium phosphate collagen composites with titanium mesh facilitate alveolar augmentation in canine mandibular bone defects

This study was designed to investigate whether bone regeneration by implantation of octacalcium phosphate and porcine atelocollagen composite (OCP/Col) would be enhanced if mechanical stress to the implanted OCP/Col were alleviated. OCP/Col discs were implanted into an arc-shaped mandibular defect in male adult beagle dogs divided into untreated, OCP/Col, and OCP/Col/Mesh groups. In the OCP/Col/Mesh group, mechanical stress towards the implanted OCP/Col was alleviated by a titanium mesh. Bone regeneration in the three groups was compared after 6 months. Macroscopically, the alveolus in the OCP/Col/Mesh group was augmented vertically more than in the other two groups. Morphometric analysis by micro-CT showed the bone volume in the OCP/Col/Mesh group was significantly greater than in the other two groups. The augmented alveolus in the OCP/Col/Mesh group consisted of outer cortical and inner cancellous structure. Histologically, the OCP/Col/Mesh-treated alveolus was augmented by matured bone tissue along the inside of the titanium mesh. The implanted OCP/Col in the OCP/Col/Mesh and OCP/Col groups had almost disappeared. These results indicated that vertical bone regeneration by OCP/Col was efficient and successful when the mechanical stress to the implanted OCP/Col was alleviated. OCP/Col should be a useful bone substitute with active structural reconstitution.

Bone tissue engineering: current strategies and techniques--part I: Scaffolds

Bone repair and regeneration is a dynamic process that involves a complex interplay between the (1) ground substance, (2) cells, and (3) milieu. While each constituent is integral to the final product, it is often helpful to consider each component individually. Therefore, we created a two-part review to examine scaffolds and cells' roles in bone tissue engineering. In Part I, we review the myriad of materials use for in vivo bone engineering. In Part II, we discuss the variety cell types (e.g., osteocytes, osteoblasts, osteoclasts, chondrocytes, mesenchymal stem cells, and vasculogenic cells) that are seeded upon or recruited to these scaffolds. In Part III, we discuss the optimization of the microenvironment. The biochemical processes and sequence of events that guide matrix production, cellular activation, and ossification are vital to developing successful bone tissue engineering strategies and are thus succinctly reviewed herein.

Calcium phosphate coatings on magnesium alloys for biomedical applications: a review

Magnesium has been suggested as a revolutionary biodegradable metal for use as an orthopaedic material. As a biocompatible and degradable metal, it has several advantages over the permanent metallic materials currently in use, including eliminating the effects of stress shielding, improving biocompatibility concerns in vivo and improving degradation properties, removing the requirement of a second surgery for implant removal. The rapid degradation of magnesium, however, is a double-edged sword as it is necessary to control the corrosion rates of the materials to match the rates of bone healing. In response, calcium phosphate coatings have been suggested as a means to control these corrosion rates. The potential calcium phosphate phases and their coating techniques on substrates are numerous and can provide several different properties for different applications. The reactivity and low melting point of magnesium, however, require specific parameters for calcium phosphate coatings to be successful. Within this review, an overview of the different calcium phosphate phases, their properties and their behaviour in vitro and in vivo has been provided, followed by the current coating techniques used for calcium phosphates that may be or may have been adapted for magnesium substrates.

Cranial bone defects: current and future strategies

Bony defects in the craniomaxillofacial skeleton remain a major and challenging health concern. Surgeons have been trying for centuries to restore functionality and aesthetic appearance using autografts, allografts, and even xenografts without entirely satisfactory results. As a result, physicians, scientists, and engineers have been trying for the past few decades to develop new techniques to improve bone growth and bone healing. In this review, the authors summarize the advantages and limitations of current animal models; describe current materials used as scaffolds, cell-based, and protein-based therapies; and lastly highlight areas for future investigation. The purpose of this review is to highlight the major scaffold-, cell-, and protein-based preclinical tools that are currently being developed to repair cranial defects.

Association of collagen with calcium phosphate promoted osteogenic responses of osteoblast-like MG63 cells

In this investigation, the effects of the association of the collagen (COLL) molecules with the calcium phosphate (CaP) film were examined with respect to both the physicochemical properties of the CaP films and the osteoblast responses, such as the adhesion, proliferation, differentiation, and mineralization. The COLL pre-adsorbed CaP film (CaPA) exhibited significant changes in the surface morphology compared to the COLL incorporated CaP film (CaPC). The adhesions of the osteoblast-like MG63 cells were similar on the CaPC or CaPA films. However, the proliferation of the MG63 cells on CaPC was comparable to CaP but considerably different than CaPA. The differentiation of the MG63 cells was greatly improved on CaPC and CaPA compared to CaP and more pronounced on CaPA. The presence of COLL within or on the CaP films significantly modulated the expression of the phenotypic genes, including osteopontin (OPN), alkaline phosphatase (ALP), and the transforming growth factor-β (TGF-β). The expression patterns of these genes elucidated that COLL that was present within or on the CaP film supported the osteoblast proliferation and differentiation. These positive effects were stronger for CaPA than CaPC. The bone-like nodules formed on all of the specimens. However, the mineralization of CaPC and CaPA was significantly higher than CaP, indicating that the association of CaP with COLL promoted the mineral deposition. Therefore, the association of the COLL molecules with the CaP film induced positive effects on the biomineralization. Overall, the incorporation of COLL efficiently enhanced the osteoblast responses of CaP. This system can be utilized in a drug delivery system using calcium phosphate. Although the incorporation effects were slightly higher for the osteoblast responses of CaPA than CaPC, CaPC can be used when the longer drug release times are desirable.

Bone regeneration by octacalcium phosphate collagen composites in a dog alveolar cleft model

Octacalcium phosphate (OCP) and porcine atelocollagen sponge composites (OCP/Col) markedly enhanced bone regeneration in a rat cranial defect model. To assess clinical application, the authors examined whether OCP/Col would enhance bone regeneration in an alveolar cleft model in an adult dog, which was assumed to reflect patients with alveolar cleft. Disks of OCP/Col or collagen were implanted into the defect and bone regeneration by OCP/Col or collagen was investigated 4 months after implantation. Macroscopically, the OCP/Col-treated alveolus was obviously augmented and occupied by radio-opacity, and the border between the original bone and the defect was indistinguishable. Histological analysis revealed it was filled and bridged with newly formed bone; a small quantity of the remaining implanted OCP was observed. X-ray diffraction patterns of the area of implanted OCP/Col indicated no difference from those of dog bone. In the collagen-treated alveolus, the hollowed alveolus was mainly filled with fibrous connective tissue, and a small amount of new bone was observed at the defect margin. These results suggest that bone was obviously repaired when OCP/Col was implanted into the alveolar cleft model in a dog, and OCP/Col would be a significant bone regenerative material to substitute for autogeneous bone.

Intramembranous bone tissue response to biodegradable octacalcium phosphate implant

Previous studies showed that synthetic octacalcium phosphate (OCP) enhances bone formation coupled with its own osteoclastic biodegradation more than non-biodegradable hydroxyapatite (HA), including sintered HA ceramic, when implanted in animal bone defects. The present study was designed to investigate whether synthetic OCP in granule form has biodegradable characteristics when implanted in the subperiosteal area of mouse calvaria in comparison with non-sintered stoichiometric HA, especially in relatively short periods after implantation. OCP crystals exhibited plate-like morphology, whereas HA crystals had a sphere-like structure. Both crystals had large pore volumes >75% in total, with micropores within the granules. Direct bonding of newly formed bone was discernible in HA until 35 days after implantation by element analysis for calcium and phosphorus. However, histomorphometric analysis demonstrated that bone formation was facilitated on OCP surfaces with greater alkaline phosphatase activity than on HA up to 21 days. The surfaces attacked by tartrate-resistant acid phosphatase positive osteoclast-like cells were significantly greater than those of HA. OCP became encapsulated and replaced with new bone with prolonged implantation periods up to 180 days. The results suggest that the enhanced bone formation in mouse calvaria could be associated with the biodegradable nature of OCP, and that OCP could be used in augmenting intramembranous bone volume.

Porous composite scaffolds based on gelatin and partially hydrolyzed alpha-tricalcium phosphate

Porous composite scaffolds of varying compositions were prepared by freeze-drying gelatin foams containing increasing amounts of alpha-tricalcium phosphate (alpha-TCP), up to about 40 wt.%. Due to the presence of gelatin, a partial hydrolysis of alpha-TCP into octacalcium phosphate (OCP) occurs during foaming. As a consequence, the scaffolds contain both alpha-TCP and OCP, in relative amounts of about 74% and 26%, respectively, independent of the initial composition. In physiological conditions the inorganic component of the scaffolds undergoes a further hydrolysis as shown by the finding that after immersion in phosphate-buffered saline at 37 degrees C for 1 week the scaffolds contain poorly crystalline hydroxyapatite together with OCP. The scaffolds display a porous interconnected microstructure. The mean dimensions of the pores decrease from about 350 to about 170 microm as the inorganic phase content increases. Simultaneously, the mean values of the compression strength and Young's modulus increase. Stabilization of the scaffolds was obtained by using a natural, non-toxic, crosslinking agent, genipin, which significantly improves their mechanical properties.