Hydrogel loaded with thiolated chitosan modified taxifolin liposome promotes osteoblast proliferation and regulates Wnt signaling pathway to repair rat skull defects

To alleviate skull defects and enhance the biological activity of taxifolin, this study utilized the thin-film dispersion method to prepare paclitaxel liposomes (TL). Thiolated chitosan (CSSH)-modified TL (CTL) was synthesized through charge interactions. Injectable hydrogels (BLG) were then prepared as hydrogel scaffolds loaded with TAX (TG), TL (TLG), and CTL (CTLG) using a Schiff base reaction involving oxidized dextran and carboxymethyl chitosan. The study investigated the bone reparative properties of CTLG through molecular docking, western blot techniques, and transcriptome analysis. The particle sizes of CTL were measured at 248.90 ± 14.03 nm, respectively, with zeta potentials of +36.68 ± 5.43 mV, respectively. CTLG showed excellent antioxidant capacity in vitro. It also has a good inhibitory effect on Escherichia coli and Staphylococcus aureus, with inhibition rates of 93.88 ± 1.59 % and 88.56 ± 2.83 % respectively. The results of 5-ethynyl-2 '-deoxyuridine staining, alkaline phosphatase staining and alizarin red staining showed that CTLG also had the potential to promote the proliferation and differentiation of mouse embryonic osteoblasts (MC3T3-E1). The study revealed that CTLG enhances the expression of osteogenic proteins by regulating the Wnt signaling pathway, shedding light on the potential application of TAX and bone regeneration mechanisms.

Endogenous FGF-2 levels impact FGF-2/BMP-2 growth factor delivery dosing in aged murine calvarial bone defects

Bone repair in elderly mice has been shown to be improved or negatively impacted by supplementing the highly osteogenic bone morphogenetic protein-2 (BMP-2) with fibroblast growth factor-2 (FGF-2). To better predict the outcome of FGF-2 supplementation, we investigated whether endogenous levels of FGF-2 play a role in optimal dosing of FGF-2 for augmenting BMP-2 activity in elderly mice. In vivo calvarial bone defect studies in Fgf2 knockout mice with wildtype controls were conducted with the growth factors delivered in a highly localized manner from a biomimetic calcium phosphate/polyelectrolyte multilayer coating applied to a bone graft substitute. Endogenous FGF-2 levels were measured in old mice versus young and found to decrease with age. Optimal dosing for improving bone defect repair correlated with levels of endogenous FGF-2, with a larger dose of FGF-2 required to have a positive effect on bone healing in the Fgf2 knockout mice. The same dose in wildtype old mice, with higher levels of FGF-2, promoted chondrogenesis and increased osteoclast activity. The results suggest a personalized medicine approach, based on a knowledge of endogenous levels of FGF-2, should guide FGF-2 supplementation in order to avoid provoking excessive bone resorption and cartilage formation, both of which inhibited calvarial bone repair.

Effect of Amelotin on Bone Growth in the Murine Calvarial Defect Model

Amelotin (AMTN) is a protein that is expressed during the maturation of dental enamel and has important role in enamel hydroxyapatite mineralization. However, it is not well understood whether AMTN has a strong mineral-promoting ability in bone. In this study, the effect of AMTN on bone healing was investigated using mice calvarial defect model in vivo, and the expression of bone marker genes and cell proliferation were investigated to clarify the role of AMTN in bone mineralization using mouse osteogenic cells (MC3T3-E1) in vitro. Collagen membranes, with or without recombinant human (rh) AMTN, were applied to calvarial defects created on the parietal bones of C57BL/6N mice. Microcomputed tomography and histological observation revealed that the defect largely filled with mineralized tissue by the rhAMTN-containing membrane in eight weeks. Moreover, CD31 positive cells were observed in the newly formed mineralized tissue and around the rhAMTN-containing membrane. In the presence of rhAMTN, the expression of the Spp1 gene in MC3T3-E1 cells significantly increased within ten days in an osteoinductive medium. Moreover, rhAMTN significantly enhanced MC3T3-E1 cell proliferation. These findings indicate that AMTN positively influences bone repair by promoting hydroxyapatite mineralization.

Craniofacial Bone Tissue Engineering: Current Approaches and Potential Therapy

Craniofacial bone defects can result from various disorders, including congenital malformations, tumor resection, infection, severe trauma, and accidents. Successfully regenerating cranial defects is an integral step to restore craniofacial function. However, challenges managing and controlling new bone tissue formation remain. Current advances in tissue engineering and regenerative medicine use innovative techniques to address these challenges. The use of biomaterials, stromal cells, and growth factors have demonstrated promising outcomes in vitro and in vivo. Natural and synthetic bone grafts combined with Mesenchymal Stromal Cells (MSCs) and growth factors have shown encouraging results in regenerating critical-size cranial defects. One of prevalent growth factors is Bone Morphogenetic Protein-2 (BMP-2). BMP-2 is defined as a gold standard growth factor that enhances new bone formation in vitro and in vivo. Recently, emerging evidence suggested that Megakaryocytes (MKs), induced by Thrombopoietin (TPO), show an increase in osteoblast proliferation in vitro and bone mass in vivo. Furthermore, a co-culture study shows mature MKs enhance MSC survival rate while maintaining their phenotype. Therefore, MKs can provide an insight as a potential therapy offering a safe and effective approach to regenerating critical-size cranial defects.

Role of transient receptor potential channel 6 in the osteogenesis of periodontal ligament cells

Transient receptor potential channel 6 (TRPC6) is a receptor-operated Ca2+ channel that plays an important role in Ca2+ influx in the majority of non-excitable cells and influences calcium signalling and cellular responses. Therefore, the purpose of the present study was to gain insight into the role of TRPC6 in the osteogenesis of periodontal ligament cells (PDLCs). By western blot and immunohistochemical staining, the protein level of TRPC6 was found to be increased in a time-dependent manner during osteoblastic differentiation of PDLCs. In addition, the TRPC6 inhibitor SKF96365 was used to block the function of TRPC6 and inhibit osteoblastic differentiation of PDLCs. The TRPC6 activator hyperforin dicyclohexylammonium salt (hyperforin DCHA) was used to activate TRPC6 and promote osteoblastic differentiation of PDLCs. In vivo, wild-type mice showed better bone regeneration than TRPC6-/- mice, suggesting that TRPC6 has notable osteogenic induction properties and is important for bone defect repair. In conclusion, the current data demonstrated that TRPC6 plays a significant role in osteoblastic differentiation of PDLCs, suggesting that it may be a promising therapeutic target in osteogenesis.

Mechanical Properties of Human Concentrated Growth Factor (CGF) Membrane and the CGF Graft with Bone Morphogenetic Protein-2 (BMP-2) onto Periosteum of the Skull of Nude Mice

Concentrated growth factor (CGF) is 100% blood-derived, cross-linked fibrin glue with platelets and growth factors. Human CGF clot is transformed into membrane by a compression device, which has been widely used clinically. However, the mechanical properties of the CGF membranes have not been well characterized. The aims of this study were to measure the tensile strength of human CGF membrane and observe its behavior as a scaffold of BMP-2 in ectopic site over the skull. The tensile test of the full length was performed at the speed of 2mm/min. The CGF membrane (5 × 5 × 2 mm3) or the CGF/BMP-2 (1.0 μg) membrane was grafted onto the skull periosteum of nude mice (5-week-old, male), and harvested at 14 days after the graft. The appearance and size of the CGF membranes were almost same for 7 days by soaking at 4 °C in saline. The average values of the tensile strength at 0 day and 7 days were 0.24 MPa and 0.26 MPa, respectively. No significant differences of both the tensile strength and the elastic modulus were found among 0, 1, 3, and 7 days. Supra-periosteal bone induction was found at 14 days in the CGF/BMP-2, while the CGF alone did not induce bone. These results demonstrated that human CGF membrane could become a short-term, sticky fibrin scaffold for BMP-2, and might be preserved as auto-membranes for wound protection after the surgery.

Stromal cell-derived factor (SDF)-1α and platelet-rich plasma enhance bone regeneration and angiogenesis simultaneously in situ in rabbit calvaria

The current study aimed to evaluate the effects of chemokine stromal cell-derived factor (SDF)-1α and platelet-rich plasma (PRP) on bone formation and angiogenesis, and to assess whether SDF-1α and PRP could function synergistically. Four evenly distributed defects (8 mm in diameter) were generated in the calvarial bones of New Zealand white rabbits. All rabbits received four treatment regimens containing autogenous bone particles (AB), SDF-1α, or PRP. AB group presented significantly less bone formation compared with the other three groups 2 and 4 weeks after surgery. The amount of newly formed bone in the AB+PRP+SDF-1α group was similar to that in the AB + SDF-1α group at the 4-week time-point (p = 0.65), and was much greater than that in the AB and AB+PRP group (p < 0.001). Meanwhile, more new blood vessels were formed in the AB+PRP, AB+SDF-1α, and AB+PRP+SDF-1α group versus the AB group. AB+PRP+SDF-1α group showed statistically increased angiogenesis compared with the AB+PRP and AB+SDF-1α groups (both p < 0.05) after treatment for 2 and 4 weeks. These findings indicated that SDF-1α and PRP might exhibit synergistic effects to promote angiogenesis in early bone regeneration.

In vitro and in vivo biological performance of hydroxyapatite from fish waste

The aim of this study was to evaluate biocompatibility of hydroxyapatite (HAP) from fish waste using in vitro and in vivo assays. Fish samples (whitemouth croaker - Micropogonias furnieri) from the biowaste was used as HAP source. Pre-osteoblastic MC3T3-E1 cells were used in vitro study. In addition, bone defects were artificially created in rat calvaria and filled with HAP in vivo. The results demonstrated that HAP reduced cytotoxicity in pre-osteoblast cells after 3 and 6 days following HAP exposure. DNA concentration was lower in the HAP group after 6 days. Quantitative RT-PCR did not show any significant differences (p > 0.05) between groups. In vivo study revealed that bone defects filled with HAP pointed out moderate chronic inflammatory cells with slight proliferation of blood vessels after 7 and 15 days. Chronic inflammatory infiltrate was absent after 30 days of HAP exposure. There was also a decrease in the amount of biomaterial, being followed by newly formed bone tissue. All experimental groups also demonstrated strong RUNX-2 immoexpression in the granulation tissue as well as in cells in close contact with biomaterial. The number of osteoblasts inside the defect area was lower in the HAP group when compared to control group after 7 days post-implantation. Similarly, the osteoblast surface as well as the percentage of bone surface was higher in control group when compared with HAP group after 7 days post-implantation. Taken together, HAP from fish waste is a promising possibility that should be explored more carefully by tissue-engineering or biotechnology.

Assessment of novel surgical procedures using decellularised muscle and bioactive ceramic: a histological analysis

Tissue regeneration and neovascularisation in cases of major bone loss is a challenge in maxillofacial surgery. The hypothesis of the present study is that the addition of resorbable bioactive ceramic Silica Calcium Phosphate Cement (SCPC) to Declluraized Muscle Scaffold (DSM) can expedite bone formation and maturation. Two surgical defect models were created in 18 nude transgenic mice. Group 1(n = 6), with a 2-mm decortication calvarial defect, was treated with a DSM/SCPC sheet over the corticated bone as an onlay then seeded with human Mesenchymal Stromal Cells hMSC in situ. In Group 2 (n = 6), a critical size (4 mm) calvarial defect was made and grafted with DSM/SCPC/in situ human bone marrow stromal cells (hMSCs). The control groups included Group 3 (n = 3) animals, with a 2-mm decortication defect treated with an onlay DSM sheet, and Group 4 (n = 3) animals, treated with critical size defect grafted with plain DSM. After 8 weeks, bone regeneration in various groups was evaluated using histology, immunohistochemistry and histomorphometry. New bone formation and maturation was superior in groups treated with DSM/SCPC/hMSC. The DMS/SCPC scaffold has the ability to augment and induce bone regeneration and neovascularisation in cases of major bone resorption and critical size defects.

Whitlockite-Enabled Hydrogel for Craniofacial Bone Regeneration

Growth-factor-free bone regeneration remains a challenge in craniofacial engineering. Here, we engineered an osteogenic niche composed of a commercially modified alginate hydrogel and whitlockite microparticles (WHMPs), which impart tunable physicochemical properties that can direct osteogenesis of human gingival mesenchymal stem cells (GMSCs). Our in vitro studies demonstrate that WHMPs induce osteogenesis of GMSCs more effectively than previously demonstrated hydroxyapatite microparticles (HApMPs). Alginate-WHMP hydrogels showed higher elasticity without any adverse effects on the viability of the encapsulated GMSCs. Moreover, the alginate-WHMP hydrogels upregulate the mitogen-activated protein kinase (MAPK) pathway, which in turn orchestrates several osteogenic markers, such as RUNX2 and OCN, in the encapsulated GMSCs. Concurrent coculture studies with human osteoclasts demonstrate that GMSCs encapsulated in alginate-WHMP hydrogels downregulate osteoclastic activity, potentially due to release of Mg2+ ions from the WHMPs along with secretion of osteoprotegerin from the GMSCs. In vivo studies demonstrated that the GMSCs encapsulated in our osteogenic niche were able to promote bone repair in calvarial defects in murine models. Altogether, our results confirmed the development of a promising treatment modality for craniofacial bone regeneration based on an injectable growth-factor-free hydrogel delivery system.

Chimeric Peptides Quickly Modify the Surface of Personalized 3D Printing Titanium Implants to Promote Osseointegration

Titanium (Ti) and titanium alloys have been widely used in the field of biomedicine. However, the unmatched biomechanics and poor bioactivities of conventional Ti implants usually lead to insufficient osseointegration. To tackle these challenges, it is critical to develop a novel Ti implant that meets the bioadaptive requirements for load-bearing critical bone defects. Notably, three-dimensional (3D)-printed Ti implants mimic the microstructure and mechanical properties of natural bones. Additionally, eco-friendly techniques based on inorganic-binding peptides have been applied to modify Ti surfaces. Herein, in our study, Ti surfaces were modified to reinforce osseointegration using chimeric peptides constructed by connecting W9, RP1P, and minTBP-1 directly or via (GP)4, respectively. PR1P is derived from the extracellular VEGF-binding domain of prominin-1, which increases the expression of VEGF and promotes the binding of VEGF to endothelial cells, thereby accelerating angiogenesis. W9 induces osteoblast differentiation in bone marrow mesenchymal stem cells and human mesenchymal stem cells to promote bone formation. Overall, chimeric peptides promote osseointegration by promoting angiogenesis and osteogenesis. Additionally, chimeric peptides with P3&4 were more effective than those with P1&2 in improving osseointegration, which might be ascribed to the capacity of P3&4 to provide a greater range for chimeric peptides to express their activity. This work successfully used chimeric peptides to modify 3D-Ti implant surfaces to improve osseointegration on the implant-bone surface.

Beneficial osseointegration effect of hydroxyapatite coating on cranial implant - FEM investigation

A firm connection of the bone-implant-fixation system is of utmost importance for patients with cranial defects. In order to improve the connection reliability, the current research focuses on finding the optimal fixation method, as well as selection of the implant manufacturing methods and the used materials. For the latter, implementation of bioactive materials such as hydroxyapatite or other calcium phosphates has also been considered in the literature. The aim of this study was to investigate the effect of gradual osseointegration on the biomechanical performance of cranial Ti6Al4V implants with a deposited HA coating as the osseointegration agent. This effect was assessed by two different computational approaches using finite element method (FEM) modeling. The values of key input parameters necessary for FEM were obtained from experimental plasma spray deposition of HA layers onto Ti6Al4V samples. Immediately upon implantation, the HA layer at the bone-implant contact area brought only a slight decrease in the values of von Mises stress in the implant and the micro-screws when compared to a non-coated counterpart; importantly, this was without any negative trade-off in other important characteristics. The major benefit of the HA coatings was manifested upon the modeled osseointegration: the results of both approaches confirmed a significant reduction of investigated parameters such as the total implant displacements (reduced from 0.050 mm to 0.012 mm and 0.002 mm while using Approach I and II, respectively) and stresses (reduced from 52 MPa to 10 MPa and 1 MPa) in the implanted components in comparison to non-coated variant. This is a very promising result for potential use of thermally sprayed HA coatings for cranial implants.

Metal-induced delayed type hypersensitivity responses potentiate particle induced osteolysis in a sex and age dependent manner

It is widely recognized that innate macrophage immune reactions to implant debris are central to the inflammatory responses that drive biologic implant failure over the long term. Less common, adaptive lymphocyte immune reactions to implant debris, such as delayed type hypersensitivity (DTH), can also affect implant performance. It is unknown which key patient factors, if any, mediate these adaptive immune responses that potentiate particle/macrophage mediated osteolysis. The objective of this investigation was to determine to what degree known adaptive immune responses to metal implant debris can affect particle-induced osteolysis (PIO); and if this pathomechanism is dependent on: 1) innate immune danger signaling, i.e., NLRP3 inflammasome activity, 2) sex, and/or 3) age. We used an established murine calvaria model of PIO using male and female wild-type C57BL/6 vs. Caspase-1 deficient mice as well as young (12–16 weeks old) vs. aged (18–24 months old) female and male C57BL/6 mice. After induction of metal-DTH, and Cobalt-alloy particle (ASTM F-75, 0.4um median diameter) calvaria challenge, bone resorption was assessed using quantitative micro-computed tomography (micro-CT) analysis and immune responses were assessed by measuring paw inflammation, lymphocyte transformation test (LTT) reactivity and adaptive immune cytokines IFN-gamma and IL-17 (ELISA). Younger aged C57BL/6 female mice exhibited the highest rate and severity of metal sensitivity lymphocyte responses that also translated into higher PIO compared to any other experimental group. The absence of inflammasome/caspase-1 activity significantly suppressed DTH metal-reactivity and osteolysis in both male and female Caspase-1 deficient mice. These murine model results indicate that young female mice are more predisposed to metal-DTH augmented inflammatory responses to wear debris, which is highly influenced by active NLRP3 inflammasome/caspase-1 danger signaling. If these results are clinically meaningful for orthopedic patients, then younger female individuals should be appropriately assessed and followed for DTH derived peri-implant complications.

In Vivo Analysis of the Biocompatibility and Bone Healing Capacity of a Novel Bone Grafting Material Combined with Hyaluronic Acid

The present in vivo study analyses both the inflammatory tissue reactions and the bone healing capacity of a newly developed bone substitute material (BSM) based on xenogeneic bone substitute granules combined with hyaluronate (HY) as a water-binding molecule. The results of the hyaluronate containing bone substitute material (BSM) were compared to a control xenogeneic BSM of the same chemical composition and a sham operation group up to 16 weeks post implantationem. A major focus of the study was to analyze the residual hyaluronate and its effects on the material-dependent healing behavior and the inflammatory tissue responses. The study included 63 male Wistar rats using the calvaria implantation model for 2, 8, and 16 weeks post implantationem. Established and Good Laboratory Practice (GLP)-conforming histological, histopathological, and histomorphometrical analysis methods were conducted. The results showed that the new hyaluronate containing BSM was gradually integrated within newly formed bone up to the end of the study that ended in a condition of complete bone defect healing. Thereby, no differences to the healing capacity of the control BSM were found. However, the bone formation in both groups was continuously significantly higher compared to the sham operation group. Additionally, no differences in the (inflammatory) tissue response that was analyzed via qualitative and (semi-) quantitative methods were found. Interestingly, no differences were found between the numbers of pro- and anti-inflammatory macrophages between the three study groups over the entire course of the study. No signs of the HY as a water-binding part of the BSM were histologically detectable at any of the study time points, altogether the results of the present study show that HY allows for an optimal material-associated bone tissue healing comparable to the control xenogeneic BSM. The added HY seems to be degraded within a very short time period of less than 2 weeks so that the remaining BSM granules allow for a gradual osteoconductive bone regeneration. Additionally, no differences between the inflammatory tissue reactions in both material groups and the sham operation group were found. Thus, the new hyaluronate containing xenogeneic BSM and also the control BSM have been shown to be fully biocompatible without any differences regarding bone regeneration.

Umbilical Mesenchymal Stem Cell-Derived Exosome-Encapsulated Hydrogels Accelerate Bone Repair by Enhancing Angiogenesis

Repair of large bone defects represents a major challenge for orthopedic surgeons. The newly formed microvessels inside grafts play a crucial role in successful bone tissue engineering. Previously, an active role for mesenchymal stem cell (MSC)-derived exosomes in blood vessel development and progression was suggested in the repair of multiple tissues. However, the reports on the application of MSC-derived exosomes in the repair of large bone defects are sparse. In this study, we encapsulated umbilical MSC-derived exosomes (^uMSCEXOs) in hyaluronic acid hydrogel (HA-Gel) and combined them with customized nanohydroxyapatite/poly-ε-caprolactone (nHP) scaffolds to repair cranial defects in rats. Imaging and histological evaluation indicated that the ^uMSCEXOs/Gel/nHP composites markedly enhanced bone regeneration in vivo, and the ^uMSCEXOs might play a key role in this process. Moreover, the in vitro results demonstrated that ^uMSCEXOs promoted the proliferation, migration, and angiogenic differentiation of endothelial progenitor cells (EPCs) but did not significantly affect the osteogenic differentiation of BMSCs. Importantly, mechanistic studies revealed that exosomal miR-21 was the potential intercellular messenger that promoted angiogenesis by upregulating the NOTCH1/DLL4 pathway. In conclusion, our findings exhibit a promising exosome-based strategy in repairing large bone defects through enhanced angiogenesis, which potentially regulated by the miR-21/NOTCH1/DLL4 signaling axis.

Carnosol suppresses RANKL-induced osteoclastogenesis and attenuates titanium particles-induced osteolysis

Osteolysis is a common medical condition characterized by excessive activity of osteoclasts and bone resorption, leading to severe poor quality of life. It is essential to identify the medications that can effectively suppress the excessive differentiation and function of osteoclasts to prevent and reduce the osteolytic conditions. It has been reported that Carnosol (Car), isolated from rosemary and salvia, has anti-inflammatory, antioxidative, and anticancer effects, but its activity on osteolysis has not been determined. In this study, we found that Car has a strong inhibitory effect on the receptor activator of nuclear factor-κB ligand (RANKL)-induced osteoclast differentiation dose-dependently without any observable cytotoxicity. Moreover, Car can inhibit the RANKL-induced osteoclastogenesis and resorptive function via suppressing NFATc1, which is a result of affecting MAPK, NF-κB and Ca2+ signaling pathways. Moreover, the particle-induced osteolysis mouse model confirmed that Car could be effective for the treatment of bone loss in vivo. Taken together, by suppressing the formation and function of RANKL-induced osteoclast, Car, may be a therapeutic supplementary in the prevention or the treatment of osteolysis.

Physical characterization of biphasic bioceramic materials with different granulation sizes and their influence on bone repair and inflammation in rat calvaria

Biphasic calcium phosphate bioceramics (BCP) consist of a mixture of hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) within the same particle. Due to their osteoconductive properties, biocompatibility and resemblance to natural bone, these materials have become a promising and suitable alternative to autologous bone grafting. First, the topography characteristics, specific surface area, and total pore volume of BCP were evaluated using scanning electron microscopy and the BET and BJH methods. Next, this study aimed to evaluate the intensity of the inflammatory process and the bone neoformation capacity of various particle sizes of BCP in the repair of critical defects in the calvaria of rats. A xenogeneic biomaterial was used in the control group. After 30, 60, and 90 days, the animals were euthanized, followed by the processing of the samples to measure the intensity of inflammatory infiltrates and the areas of bone neoformation. Our results indicate that no considerable differences were observed in the inflammatory scores in sites treated with distinct BCP grain sizes. A greater area of bone neoformation was measured in the xenogeneic group at all analysis times, with no substantial differences in bone formation between the BCP particle size in the range of 250-500 µm and 500-1000 µm.

Photobiomodulation Therapy on the Guided Bone Regeneration Process in Defects Filled by Biphasic Calcium Phosphate Associated with Fibrin Biopolymer

The aim is to evaluate the effects of photobiomodulation therapy (PBMT) on the guided bone regeneration process (GBR) in defects in the calvaria of rats filled with biphasic calcium phosphate associated with fibrin biopolymer. Thirty male Wistar rats were randomly separated: BMG (n = 10), defects filled with biomaterial and covered by membrane; BFMG (n = 10), biomaterial and fibrin biopolymer covered by membrane; and BFMLG (n = 10), biomaterial and fibrin biopolymer covered by membrane and biostimulated with PBMT. The animals were euthanized at 14 and 42 days postoperatively. Microtomographically, in 42 days, there was more evident bone growth in the BFMLG, limited to the margins of the defect with permanence of the particles. Histomorphologically, an inflammatory infiltrate was observed, which regressed with the formation of mineralized bone tissue. In the quantification of bone tissue, all groups had a progressive increase in new bone tissue with a significant difference in which the BFMLG showed greater bone formation in both periods (10.12 ± 0.67 and 13.85 ± 0.54), followed by BFMG (7.35 ± 0.66 and 9.41 ± 0.84) and BMG (4.51 ± 0.44 and 7.11 ± 0.44). Picrosirius-red staining showed greater birefringence of collagen fibers in yellow-green color in the BFMLG, showing more advanced bone maturation. PBMT showed positive effects capable of improving and accelerating the guided bone regeneration process when associated with biphasic calcium phosphate and fibrin biopolymer.

The effect of synthetic bone graft substitutes on bone formation in rabbit calvarial defects

The aim of this study was to evaluate the influence of the intensity of the biomimetic hydroxyapatite (HA) coating of α-tricalcium phosphate (α-TCP) on biomaterial degradation and bone formation. Twenty-four female NZW rabbits of approximately 12 weeks of age were used. Critical size defects were randomly treated with 3%:97% HA:α-TCP (BBCP1), 12%:88% HA:α-TCP (BBCP2), and 23%:77% HA:α-TCP (BBCP3), respectively or sham. All defects were covered with a resorbable collagen membrane. Animals were euthanized after 3 and 12 weeks of healing and samples were investigated by micro-CT and histologic analysis. Ingrowth of newly formed woven bone from the original bone at 3-week healing period was observed in all samples. At the 12-week healing period, the new bone in the peripheral area was mainly lamellar and in the central region composed of both woven and lamellar bone. New bony tissue was found on the surface of all three types of granules and at the interior of the BBCP1 granules. Samples with 3% HA showed significantly less residual biomaterial in comparison to the other two groups. Furthermore, BBCP1 significantly promoted new bone area as compared to other three groups and more bone volume as compared to the control. Within its limitations, this study indicated the highest degradation rate in case of BBCP1 concomitant with the highest rate of bone formation. Hence, formation of new bone can be affected by the level of biomimetic HA coating of α-TCP.

Sulforaphane Inhibits Osteoclastogenesis via Suppression of the Autophagic Pathway

Previous studies have demonstrated that sulforaphane (SFN) is a promising agent against osteoclastic bone destruction. However, the mechanism underlying its anti-osteoclastogenic activity is still unclear. Herein, for the first time, we explored the potential role of autophagy in SFN-mediated anti-osteoclastogenesis in vitro and in vivo. We established an osteoclastogenesis model using receptor activator of nuclear factor kappa-β ligand (RANKL)-induced RAW264.7 cells and bone marrow macrophages (BMMs). Tartrate-resistant acid phosphatase (TRAP) staining showed the formation of osteoclasts. We observed autophagosomes by transmission electron microscopy (TEM). In vitro, we found that SFN inhibited osteoclastogenesis (number of osteoclasts: 22.67 ± 0.88 in the SFN (0) group vs. 20.33 ± 1.45 in the SFN (1 μM) group vs. 13.00 ± 1.00 in the SFN (2.5 μM) group vs. 6.66 ± 1.20 in the SFN (2.5 μM) group), decreased the number of autophagosomes, and suppressed the accumulation of several autophagic proteins in osteoclast precursors. The activation of autophagy by rapamycin (RAP) almost reversed the SFN-elicited anti-osteoclastogenesis (number of osteoclasts: 22.67 ± 0.88 in the control group vs. 13.00 ± 1.00 in the SFN group vs. 17.33 ± 0.33 in the SFN+RAP group). Furthermore, Western blot (WB) analysis revealed that SFN inhibited the phosphorylation of c-Jun N-terminal kinase (JNK). The JNK activator anisomycin significantly promoted autophagy, whereas the inhibitor SP600125 markedly suppressed autophagic activation in pre-osteoclasts. Microcomputed tomography (CT), immunohistochemistry (IHC), and immunofluorescence (IF) were used to analyze the results in vivo. Consistent with the in vitro results, we found that the administration of SFN could decrease the number of osteoclasts and the expression of autophagic light chain 3 (LC3) and protect against lipopolysaccharide (LPS)-induced calvarial erosion. Our findings highlight autophagy as a crucial mechanism of SFN-mediated anti-osteoclastogenesis and show that the JNK signaling pathway participates in this process.

Bone Regeneration Potential of Human Dental Pulp Stem Cells Derived from Elderly Patients and Osteo-Induced by a Helioxanthin Derivative

Human dental pulp stem cells (DPSCs) have high clonogenic and proliferative potential. We previously reported that a helioxanthin derivative (4-(4-methoxyphenyl)pyrido[40,30:4,5]thieno[2–b]pyridine-2-carboxamide (TH)) enhances osteogenic differentiation of DPSCs derived from young patients. However, in the clinical field, elderly patients more frequently require bone regenerative therapy than young patients. In this study, we examined and compared the osteogenic differentiation potential of TH-induced DPSCs from elderly patients and young patients to explore the potential clinical use of DPSCs for elderly patients. DPSCs were obtained from young and elderly patients and cultured in osteogenic medium with or without TH. We assessed the characteristics and osteogenic differentiation by means of specific staining and gene expression analyses. Moreover, DPSC sheets were transplanted into mouse calvarial defects to investigate osteogenesis of TH-induced DPSCs by performing micro-computed tomography (micro-CT). We demonstrated that osteogenic conditions with TH enhance the osteogenic differentiation marker of DPSCs from elderly patients as well as young patients in vitro. In vivo examination showed increased osteogenesis of DPSCs treated with TH from both elderly patients and young patients. Our results suggest that the osteogenic differentiation potential of DPSCs from elderly patients is as high as that of DPSCs from young patients. Moreover, TH-induced DPSCs showed increased osteogenic differentiation potential, and are thus a potentially useful cell source for bone regenerative therapy for elderly patients.

A collagen-based hydrogel containing tacrolimus for bone tissue engineering

Bone tissue engineering aims to develop bone graft structure that can heal bone defects without using autografts or allografts. The current study was conducted to promote bone regeneration using a collagen type I hydrogel containing tacrolimus. For this purpose, different amounts of tacrolimus (10 μg/ml, 100 μg/ml, and 1000 μg/ml) were loaded into the hydrogel. The resulting drug-loaded hydrogels were characterized for their porosity, swelling capacity, weight loss, drug release, blood compatibility, and cell proliferation (MTT). For functional analysis, the developed hydrogel surrounded by a film made of gelatin and polycaprolactone (PCL) was administrated in the calvarias defect of Wistar rats. The results indicated that the hydrogel has a porosity of 89.2 ± 12.5% and an appropriate swelling, drug release, and blood compatibility behavior. The in vitro results indicated that the collagen hydrogel containing 1000 μg tacrolimus was adequate in terms of cell proliferation. Finally, in vivo studies provided some evidence of the potential of the developed hydrogel for bone healing.

Marine collagen scaffolds and photobiomodulation on bone healing process in a model of calvaria defects

INTRODUCTION

Collagen from marine esponges has been used as a promising material for tissue engineering proposals. Similarly, photobiomodulation (PBM) is able of modulating inflammatory processes after an injury, accelerating soft and hard tissue healing and stimulating neoangiogenesis. However, the effects of the associated treatments on bone tissue healing have not been studied yet. In this context, the present study aimed to evaluate the biological temporal modifications (using two experimental periods) of marine sponge collagen or sponging (SPG) based scaffold and PBM on newly formed bone using a calvaria bone defect model.

MATERIAL AND METHODS

Wistar rats were distributed into two groups: SPG or SPG/PBM and euthanized into two different experimental periods (15 and 45 days post-surgery). A cranial critical bone defect was used to evaluate the effects of the treatments. Histology, histomorfometry and immunohistological analysis were performed.

RESULTS

Histological findings demonstrated that SPG/PBM-treated animals, 45 days post-surgery, demonstrated a higher amount of connective and newly formed bone tissue at the region of the defect compared to CG. Notwithstanding, no difference among groups were observed in the histomorphometry. Interestingly, for both anti-transforming growth factor-beta (TGF-β) and anti-vascular endothelial growth factor (VEGF) immunostaining, higher values for SPG/PBM, at 45 days post-surgery could be observed.

CONCLUSION

It can be concluded that the associated treatment can be considered as a promising therapeutical intervention.

Indirect comparison of efficacy between different antibiotic prophylaxis against the intracranial infection after craniotomy

BACKGROUND

Many studies had shown that prophylactic use of antibiotics could significantly reduce the intracranial infection (ICI) rate of craniotomy. However, there has been no comparison of these antibiotics.

METHODS

An electronic database search was performed, from inception to June 102,020. Randomized controlled trials (RCT) using different intravenous antibiotics (IVA) against the ICIs after craniotomy were considered. The primary outcome was the incidence rates of ICIs. An indirect treatment comparison (ITC) was conducted to compare the protective effect among the diverse antibiotic prophylaxis to prevent ICIs after craniotomy. Risk of potential bias was assessed.

RESULTS

A total of 3214 patients after craniotomy in 11 studies were included, 159 patients experienced postoperative ICI, including 33 patients in the antibacterial group and 126 in the control group. The calculate results of meta-analysis showed that except fusidic acid, preoperative intravenous injection of cephalosporin, clindamycin, vancomycin, and penicillin can significantly reduce the incidence of ICI after craniotomy, and ITC showed there was no statistically significance difference in the rates of post craniotomy ICI between the various antibiotics.

CONCLUSION

The current evidence shows that low-grade antibacterial drugs can be selected to prevent ICI after craniotomy, but this may be due to the limited number of studies per antibiotic. It still needs more high-quality, large sample RCT to confirm.

SYSTEMIC REVIEW REGISTRATION

PROSPERO CRD42019133369.

Augmentation of Bone Regeneration by Depletion of Stress-Induced Senescent Cells Using Catechin and Senolytics

Despite advances in bone regenerative medicine, the relationship between stress-induced premature senescence (SIPS) in cells and bone regeneration remains largely unknown. Herein, we demonstrated that the implantation of a lipopolysaccharide (LPS) sustained-release gelatin sponge (LS-G) increases the number of SIPS cells and that the elimination of these cells promotes bone formation in critical-sized bone defects in the rat calvaria. Histological (hematoxylin–eosin and SA-β-gal) and immunohistological (p16 and p21 for analyzing cellular senescence and 4-HNE for oxidation) staining was used to identify SIPS cells and elucidate the underlying mechanism. Bone formation in defects were analyzed using microcomputed tomography, one and four weeks after surgery. Parallel to LS-G implantation, local epigallocatechin gallate (EGCG) administration, and systemic senolytic (dasatinib and quercetin: D+Q) administration were used to eliminate SIPS cells. After LS-G implantation, SA-β-gal-, p16-, and p21-positive cells (SIPS cells) accumulated in the defects. However, treatment with LS-G+EGCG and LS-G+D+Q resulted in lower numbers of SIPS cells than that with LS-G in the defects, resulting in an augmentation of newly formed bone. We demonstrated that SIPS cells induced by sustained stimulation by LPS may play a deleterious role in bone formation. Controlling these cell numbers is a promising strategy to increase bone regeneration.

Degradation, Bone Regeneration and Tissue Response of an Innovative Volume Stable Magnesium-Supported GBR/GTR Barrier Membrane

Introduction: Bioresorbable collagenous barrier membranes are used to prevent premature soft tissue ingrowth and to allow bone regeneration. For volume stable indications, only non-absorbable synthetic materials are available. This study investigates a new bioresorbable hydrofluoric acid (HF)-treated magnesium (Mg) mesh in a native collagen membrane for volume stable situations. Materials and Methods: HF-treated and untreated Mg were compared in direct and indirect cytocompatibility assays. In vivo, 18 New Zealand White Rabbits received each four 8 mm calvarial defects and were divided into four groups: (a) HF-treated Mg mesh/collagen membrane, (b) untreated Mg mesh/collagen membrane (c) collagen membrane and (d) sham operation. After 6, 12 and 18 weeks, Mg degradation and bone regeneration was measured using radiological and histological methods. Results: In vitro, HF-treated Mg showed higher cytocompatibility. Histopathologically, HF-Mg prevented gas cavities and was degraded by mononuclear cells via phagocytosis up to 12 weeks. Untreated Mg showed partially significant more gas cavities and a fibrous tissue reaction. Bone regeneration was not significantly different between all groups. Discussion and Conclusions: HF-Mg meshes embedded in native collagen membranes represent a volume stable and biocompatible alternative to the non-absorbable synthetic materials. HF-Mg shows less corrosion and is degraded by phagocytosis. However, the application of membranes did not result in higher bone regeneration.

Intrafibrillar Mineralized Collagen-Hydroxyapatite-Based Scaffolds for Bone Regeneration

As one of the major challenges in the field of tissue engineering, large skeletal defects have attracted wide attention from researchers. Collagen (Col) and hydroxyapatite (HA), the most abundant protein and the main component in natural bone, respectively, are usually used as a biomimetic composite material in tissue engineering due to their excellent biocompatibility and biodegradability. In this study, novel intrafibrillar mineralized Col-HA-based scaffolds, constructed in either cellular or lamellar microstructures, were established through a biomimetic method to enhance the new bone-regenerating capability of tissue engineering scaffolds. Moreover, iron (Fe) and manganese (Mn), two of the essential trace elements in the body, were successfully incorporated into the lamellar scaffold to further improve the osteoinductivity of these biomaterials. It was found that the lamellar scaffolds demonstrated better osteogenic abilities compared to both in-house and commercial Col-HA-based cellular scaffolds in vitro and in vivo. Meanwhile, Fe/Mn incorporation further amplified the osteogenic promotion of the lamellar scaffolds. More importantly, a synergistic effect was observed in the Fe and Mn dual-element-incorporated lamellar scaffolds for both in vitro osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and in vivo bone regeneration loaded with fresh bone marrow cells. This study provides a simple but practical strategy for the creation of functional scaffolds for bone regeneration.

The synergetic effect of bioactive molecule-loaded electrospun core-shell fibres for reconstruction of critical-sized calvarial bone defect-The effect of synergetic release on bone Formation

OBJECTIVES

Bone regeneration is a complex process modulated by multiple growth factors and hormones during long regeneration period; thus, designing biomaterials with the capacity to deliver multiple bioactive molecules and obtain sustained release has gained an increasing popularity in recent years. This study is aimed to evaluate the effect of a novel core-shell electrospun fibre loaded with dexamethasone (DEX) and bone morphogenetic protein-2 (BMP-2) on bone regeneration.

MATERIALS AND METHODS

The core-shell electrospun fibres were fabricated by coaxial electrospinning technology, which were composed of poly-D, L-lactide (PLA) shell and poly (ethylene glycol) (PEG) core embedded with BMP-2 and DEX-loaded micelles. Morphology, hydrophilicity, gradation, release profile of BMP-2 and DEX, and cytological behaviour on bone marrow mesenchymal stem cells (BMSCs) were characterized. Furthermore, the effect on bone regeneration was evaluated via critical-sized calvarial defect model.

RESULTS

The electrospun fibres were featured by the core-shell fibrous architecture and a suitable degradation rate. The sustained release of DEX and BMP-2 was up to 562 hours. The osteogenic gene expression and calcium deposition of BMSCs were significantly enhanced, indicating the osteoinduction capacity of electrospun fibres. This core-shell fibre could accelerate repair of calvarial defects in vivo via synergistic effect.

CONCLUSIONS

This core-shell electrospun fibre loaded with DEX and BMP-2 can act synergistically to enhance bone regeneration, which stands as a strong potential candidate for repairing bone defects.

Fibrin Glue/Fibronectin/Heparin-Based Delivery System of BMP2 Induces Osteogenesis in MC3T3-E1 Cells and Bone Formation in Rat Calvarial Critical-Sized Defects

Bone morphogenetic proteins (BMPs) have been used to promote bone formation in many clinical scenarios. However, the BMPs are inherently unstable in vivo and therefore need to be combined with carriers for controlled delivery. In this study, an innovative and efficient fibrin glue/fibronectin/heparin (FG/Fn/Hep)-based delivery system was developed for controlled release of BMP2. The incorporation of heparin can significantly slow the release of BMP2 without substantially affecting the structure and stiffness of the FG/Fn. The BMP2 release from the FG/Fn/Hep-BMP2 hydrogel is largely dominated by hydrogel degradation rather than simple diffusion. In vitro release experiments and MC3T3-E1 cell induction experiments showed that BMP2 can be released steadily and can induce MC3T3-E1 cells to differentiate into osteoblasts efficiently. This process is characterized by the significantly increased expression of calcium deposits, alkaline phosphatase, runt-related transcription factor-2, osteopontin, osteocalcin, and collagen I in comparison with the negative control. In vivo assessments revealed that the FG/Fn/Hep-BMP2 hydrogel significantly promotes bone regeneration in a rat calvarial critical-sized defect model. Our investigation indicates that FG/Fn/Hep-BMP2 hydrogel holds promise to be used as an alternative biomaterial for the repair of bone defects.

In vitro and in vivo Biological Responses to Graphene and Graphene Oxide: A Murine Calvarial Animal Study

BACKGROUND

Graphene and its derivatives have recently gained popularity in the biomedical field. Previous studies have confirmed that both the mechanical strength and wear resistance of graphene-containing polyethylene have been greatly improved. Therefore, it is being considered as an alternative for artificial joint replacement liners. Based on the literature, the wear debris generated from the traditional polymers used for orthopedic liners could lead to particle-induced osteolysis and, consequently, failure of joint replacement. However, the biological response of this novel graphene-based polymer is still unclear. Therefore, the current study aimed to investigate the in vitro and in vivo biological effects of graphene and graphene oxide (GO) particles on bone.

MATERIALS AND METHODS

The biological responses of graphene and GO particles were tested via in vitro and murine calvarial in vivo models. In the in vitro model, murine macrophage cells were mixed with particles and hydrogel and printed into two differently designed scaffolds; the induced proinflammatory cytokines were then tested. In the murine in vivo model, the particle size distribution was measured via SEM, and these particles were then administrated in the calvarial area, referring to our established model. A micro-CT and histological analysis were performed to examine the biological effects of the particles on bone health. The data were analyzed via the one-way analysis of variance to determine the differences between the groups.

RESULTS

Both graphene and GO induced significantly higher TNF-α and IL-6 secretion compared with the control in the three-dimensional in vitro model. In the murine calvarial in vivo test, the graphene and GO particles increased the bone mass compared with the sham groups in the micro-CT analysis. Bone formation was also observed in the histological analysis.

CONCLUSION

In these in vivo and in vitro studies, the graphene and GO wear debris did not seem to induce harmful biological response effect to bone. Bone formation around the skull was observed in the calvarial model instead. Graphene-containing biomaterials could be a suitable new material for application in orthopedic prostheses due to their benefit of eliminating the risk of particle-induce osteolysis.

The effects of morin on bone regeneration to accelerate healing in bone defects in mice

Restoring bone defects are the major challenge facing clinical trial therapy, particularly skull related problems. Morin, a naturally occurring compound, has pro-osteogenesis. This research focuses on assessing the role of morin for its pro-osteogenesis activities. We utilized in vivo and in vitro models to investigate the molecular-level mechanisms of morin's osteoblastic biological activity. The effectiveness of morin on pro-osteogenesis (100 mg/kg/day) was assessed by monitoring modifications in the bone histomorphometry score, the development of immature osteoblasts from mesenchymal stems cells and improvements in the expression of pro-osteogenic cytokines in skull defected (SD) mice. Quantitative-PCR, Western blot analysis, and immunofluorescence were studied to investigate the signaling pathways. Morin has a substantial in vivo pro-osteogenesis effect which can facilitate the development of osteoblasts, the production of osteoblast related marker genes, and in vitro protein markers for osteoblasts. From a molecular biology standpoint, morin contributes to the development of osteoblasts and stimulation of the Wnt pathway with the activation and translocation of β-catenin nuclei. Our findings from the study revealed that morin may be a beneficial substitute for helping regenerate bone defects.

Dipyridamole-loaded 3D-printed bioceramic scaffolds stimulate pediatric bone regeneration in vivo without disruption of craniofacial growth through facial maturity

This study investigates a comprehensive model of bone regeneration capacity of dypiridamole-loaded 3D-printed bioceramic (DIPY-3DPBC) scaffolds composed of 100% beta-tricalcium phosphate (β -TCP) in an immature rabbit model through the time of facial maturity. The efficacy of this construct was compared to autologous bone graft, the clinical standard of care in pediatric craniofacial reconstruction, with attention paid to volume of regenerated bone by 3D reconstruction, histologic and mechanical properties of regenerated bone, and long-term safety regarding potential craniofacial growth restriction. Additionally, long-term degradation of scaffold constructs was evaluated. At 24 weeks in vivo, DIPY-3DPBC scaffolds demonstrated volumetrically significant osteogenic regeneration of calvarial and alveolar defects comparable to autogenous bone graft with favorable biodegradation of the bioactive ceramic component in vivo. Characterization of regenerated bone reveals osteogenesis of organized, vascularized bone with histologic and mechanical characteristics comparable to native bone. Radiographic and histologic analyses were consistent with patent craniofacial sutures. Lastly, through application of 3D morphometric facial surface analysis, our results support that DIPY-3DPBC scaffolds do not cause premature closure of sutures and preserve normal craniofacial growth. Based on this novel evaluation model, this DIPY-3DPBC scaffold strategy is a promising candidate as a safe, efficacious pediatric bone tissue engineering strategy.

Integration of Epigallocatechin Gallate in Gelatin Sponges Attenuates Matrix Metalloproteinase-Dependent Degradation and Increases Bone Formation

Matrix metalloproteinase (MMP)-2 and MMP-9 are well-known gelatinases that disrupt the extracellular matrix, including gelatin. However, the advantages of modulating MMP expression in gelatin-based materials for applications in bone regenerative medicine have not been fully clarified. In this study, we examined the effects of epigallocatechin gallate (EGCG), a major polyphenol catechin isolated from green tea, on MMP expression in gelatin sponges and its association with bone formation. Four gelatin sponges with or without EGCG were prepared and implanted into bone defects for up to 4 weeks. Histological and immunohistological staining were performed. Micro-computed tomography was used to estimate the bone-forming capacity of each sponge. Our results showed that EGCG integration attenuated MMP-2 (70.6%) and -9 expression (69.1%) in the 1 week group, increased residual gelatin (118.7%), and augmented bone formation (101.8%) in the 4 weeks group in critical-sized bone defects of rat calvaria compared with vacuum-heated gelatin sponges without EGCG. Moreover, vacuum-heated gelatin sponges with EGCG showed superior bone formation compared with other sponges. The results indicated that integration of EGCG in gelatin-based materials modulated the production and activity of MMP-2 and -9 in vivo, thereby enhancing bone-forming capacity.

A biomimetic self-assembling peptide promotes bone regeneration in vivo: A rat cranial defect study

Rationally designed, pH sensitive self-assembling β-peptides (SAPs) which are capable of reversibly switching between fluid and gel phases in response to environmental triggers are potentially useful injectable scaffolds for skeletal tissue engineering applications. SAP P₁₁-4 (CH₃COQQRFEWEFEQQNH₂) has been shown to nucleate hydroxyapatite mineral de novo and has been used in dental enamel regeneration. We hypothesised that addition of mesenchymal stromal cells (MSCs) would enhance the in vivo effects of P₁₁-4 in promoting skeletal tissue repair. Cranial defects were created in athymic rats and filled with either Bio-Oss® (anorganic bone chips) or P₁₁-4 ± human dental pulp stromal cells (HDPSCs). Unfilled defects served as controls. After 4 weeks, only those defects filled with P₁₁-4 alone showed significantly increased bone regeneration (almost complete healing), compared to unfilled control defects, as judged using quantitative micro-CT, histology and immunohistochemistry. In silico modelling indicated that fibril formation may be essential for any mineral nucleation activity. Taken together, these data suggest that self-assembling peptides are a suitable scaffold for regeneration of bone tissue in a one step, cell-free therapeutic approach.

Multifunctional Nanoengineered Hydrogels Consisting of Black Phosphorus Nanosheets Upregulate Bone Formation

Tissue-engineered hydrogels have received extensive attention as their mechanical properties, chemical compositions, and biological signals can be dynamically modified for mimicking extracellular matrices (ECM). Herein, the synthesis of novel double network (DN) hydrogels with tunable mechanical properties using combinatorial screening methods is reported. Furthermore, nanoengineered (NE) hydrogels are constructed by addition of ultrathin 2D black phosphorus (BP) nanosheets to the DN hydrogels with multiple functions for mimicking the ECM microenvironment to induce tissue regeneration. Notably, it is found that the BP nanosheets exhibit intrinsic properties for induced CaP crystal particle formation and therefore improve the mineralization ability of NE hydrogels. Finally, in vitro and in vivo data demonstrate that the BP nanosheets, mineralized CaP crystal nanoparticles, and excellent mechanical properties provide a favorable ECM microenvironment to mediate greater osteogenic cell differentiation and bone regeneration. Consequently, the combination of bioactive chemical materials and excellent mechanical stimuli of NE hydrogels inspire novel engineering strategies for bone-tissue regeneration.

Short-term use of resveratrol in alloplastic graft material applied with calvarial bone defects in rats

PURPOSE

The effects of resveratrol administration on calvarial bone defects with alloplastic graft material was investigated for osteoinductive reaction and bone development in rats.

METHODS

Healthy male rats were randomly divided into 3 groups consisting of 10 rats. Groups were as follows: control (defect) group, defect + graft group, and defect + graft + resveratrol group. A calvarial bone defect was created in all groups, alloplastic bone grafts were applied to the defect in the 2nd and 3rd group, resveratrol (5 mg/kg/day) was added to the drinking water of the animals following graft application for 28 days in the 3rd group.

RESULTS

Increase in osteoclasts and necrotic changes were observed histopathologically in the control group. In the 2nd group, reduction of inflammation, congestion of blood vessels, increased osteblastic activity, osteoinductive effect, progression of osteocyte development and increased collagen fibers in connective tissue were observed. In the 3rd group, osteoblasts seemed to secrete bone matrix and accelerate osteoinductive effect with increased osteopregenitor activity and positive osteopontin and osteonectin expressions.

CONCLUSION

Resveratrol treatment was thought to be an alternative and supportive drug for implant application by inducing new bone formation in the calvaral defect region as a result of short-term treatment.

Identification of a Kavain Analog with Efficient Anti-inflammatory Effects

Kavain, a compound derived from Piper methysticum, has demonstrated anti-inflammatory properties. To optimize its drug properties, identification and development of new kavain-derived compounds was undertaken. A focused library of analogs was synthesized and their effects on Porphyromonas gingivalis (P. gingivalis) elicited inflammation were evaluated in vitro and in vivo. The library contained cyclohexenones (5,5-dimethyl substituted cyclohexenones) substituted with a benzoate derivative at the 3-position of the cyclohexanone. The most promising analog identifed was a methylated derivative of kavain, Kava-205Me (5,5-dimethyl-3-oxocyclohex-1-en-1-yl 4-methylbenzoate.) In an in vitro assay of anti-inflammatory effects, murine macrophages (BMM) and THP-1 cells were infected with P. gingivalis (MOI = 20:1) and a panel of cytokines were measured. Both cell types treated with Kava-205Me (10 to 200 μg/ml) showed significantly and dose-dependently reduced TNF-α secretion induced by P. gingivalis. In BMM, Kava-205Me also reduced secretion of other cytokines involved in the early phase of inflammation, including IL-12, eotaxin, RANTES, IL-10 and interferon-γ (p < 0.05). In vivo, in an acute model of P. gingivalis-induced calvarial destruction, administration of Kava-205Me significantly improved the rate of healing associated with reduced soft tissue inflammation and osteoclast activation. In an infective arthritis murine model induced by injection of collagen-antibody (ArthriomAb) + P. gingivalis, administration of Kava-205Me was able to reduce efficiently paw swelling and joint destruction. These results highlight the strong anti-inflammatory properties of Kava-205Me and strengthen the interest of testing such compounds in the management of P. gingivalis elicited inflammation, especially in the management of periodontitis.

Bioglass/PLGA associated to photobiomodulation: effects on the healing process in an experimental model of calvarial bone defect

Bioactive glasses (BG) are known for their ability to bond to bone tissue. However, in critical situations, even the osteogenic properties of BG may be not enough to induce bone consolidation. Thus, the enrichment of BG with polymers such as Poly (D, L-lactic-co-glycolic) acid (PLGA) and associated to photobiomodulation (PBM) may be a promising strategy to promote bone tissue healing. The aim of the present study was to investigate the in vivo performance of PLGA supplemented BG, associated to PBM therapy, using an experimental model of cranial bone defect in rats. Rats were distributed in 4 different groups (Bioglass, Bioglass/PBM, Bioglas/PLGA and BG/PLGA/PBM). After the surgical procedure to induce cranial bone defects, the pre-set samples were implanted and PBM treatment (low-level laser therapy) started (808 nm, 100 mW, 30 J/cm²). After 2 and 6 weeks, animals were euthanized, and the samples were retrieved for the histopathological, histomorphometric, picrosirius red staining and immunohistochemistry analysis. At 2 weeks post-surgery, it was observed granulation tissue and areas of newly formed bone in all experimental groups. At 6 weeks post-surgery, BG/PLGA (with or without PBM) more mature tissue around the biomaterial particles. Furthermore, there was a higher deposition of collagen for BG/PLGA in comparison with BG/PLGA/PBM, at second time-point. Histomorphometric analysis demonstrated higher values of BM.V/TV for BG compared to BG/PLGA (2 weeks post-surgery) and N.Ob/T.Ar for BG/PLGA compared to BG and BG/PBM (6 weeks post-surgery). This current study concluded that the use of BG/PLGA composites, associated or not to PBM, is a promising strategy for bone tissue engineering.

Local supplementation with plant-derived recombinant human FGF2 protein enhances bone formation in critical-sized calvarial defects

Numerous studies have demonstrated the advantages of plant cell suspension culture systems in producing bioactive recombinant human growth factors. This study investigated the biological activity of recombinant basic human fibroblast growth factor (rhFGF2) protein produced by a plant culture system to enhance new bone formation in a bone defect mouse model. The human FGF2 cDNA gene was cloned into a plant expression vector driven by the rice α-amylase 3D promoter. The vector was introduced into rice calli (Oryza sativa L. cv. Dongjin), and the clone with the highest expression of rhFGF2 was selected. Maximum accumulation of rhFGF2 protein (approximately 28 mg/l) was reached at 13 day post-incubation. Male C57BL/6 mice underwent calvarial defect surgery and the defects were loaded with absorbable collagen sponge (ACS) only (ACS group) or ACS impregnated with 5 μg of plant-derived rhFGF2 (p-FGF2) protein or E. coli-derived rhFGF2 (e-FGF2) protein. Similar to the effects of e-FGF2, local delivery with p-FGF2 enhanced bone healing in the damaged region to higher levels than the ACS group. Exogenous addition of p-FGF2 or e-FGF2 exhibited similar effects on proliferation, mineralization, and osteogenic marker expression in MC3T3-E1 cells. Together, the current findings support the usefulness of this plant-based expression system for the production of biologically active rhFGF2.

The Protective Effect of α-Tocopherol on the Content of Selected Elements in the Calvaria for Exposed Hens to TCDD in the Early Embryonic Period

This paper focuses on negative effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) on element content in male chicken calvaria and α-tocopherol (vitamin E) ability to reduce its toxic potential on bone mineralization in offspring. In the experiment carried out once, a solution containing only DMSO, TCDD, TCDD + α-tocopherol, and exclusively α-tocopherol was administrated. Subsequently, on the 5th day after hatching, the mineral composition of the chicken calvaria was evaluated. The results obtained suggest that the use of α-tocopherol contributes to the maintenance of the concentration of calcium, magnesium, and manganese in the chicken calvaria treated with TCDD in the embryonic period. In turn, vitamin E increases the level of zinc. It has been found that α-tocopherol in chicken embryos has a protective effect against disturbance of level of chosen trace elements in the bones of offspring caused by the TCDD.

Suppressive effect of melatonin on osteoclast function via osteocyte calcitonin

Many studies have investigated the actions of melatonin on osteoblasts and osteoclasts. However, the underlying mechanisms, especially regarding osteocyte function, remain largely unknown. Therefore, this study aimed to clarify the underlying mechanisms of melatonin action on bone tissue via osteocyte function. Chick calvariae were employed as a model. In ovo injection of melatonin (5, 50 and 500 µg) dose-dependently decreased the mRNA expression levels of cathepsin K and matrix metalloproteinase 9 (MMP9) in chick calvariae without affecting the expression levels of receptor activator of NF-κB ligand or osteoprotegerin. Surprisingly enough, the expression of calcitonin mRNA in chick calvariae was significantly raised. After 3 days of in vitro treatment of melatonin (10-7 and 10-5 M) on newly hatched chick calvariae, both calcitonin mRNA expression in calvariae and the concentration of calcitonin in cultured medium were augmented in a dose-dependent manner, coincident with the decreased mRNA expression levels of cathepsin K and MMP9. Immunohistochemical analyses revealed expression of melatonin receptors and calcitonin by osteocytes buried in bone matrix. Moreover, the mRNA expression levels of melatonin receptors, calcitonin and sclerostin (a marker of osteocyte), were strongly and positively correlated. In conclusion, we demonstrated the expression of melatonin receptors and calcitonin expression in osteocytes for the first time and suggest a new mechanism underlying the suppressive effect of melatonin on osteoclasts via upregulation of calcitonin secretion by osteocytes.

Targeting vascular endothelial growth factor ameliorates PMMA-particles induced inflammatory osteolysis in murine calvaria

Cytokines and growth factors mediate inflammatory osteolysis in response to particles released from bone implants. However, the mechanism by which this process develops is not entirely clear. Blood vessels and related factors may be required to deliver immune cells and soluble factors to the injury site. Therefore, in the current study we investigated if, vascular endothelial growth factor (VEGF), which is required for angiogenesis, mediates polymethylmethacrylate (PMMA) particles-induced osteolysis. Using bone marrow derived macrophages (BMMs) and ST2 stromal cell line, we show that PMMA particles increase VEGF expression. Further, using a murine calvarial osteolysis model, we found that PMMA injection over calvaria induce significant increase in VEGF expression as well as new vessel formation, represented by von Willebrand factor (vWF) staining. Co-treatment using a VEGF-neutralizing antibody abrogated expression of vWF, indicating decreased angiogenesis. Finally, VEGF neutralizing antibody reduced expression of Tumor necrosis factor (TNF) and decreased osteoclastogenesis induced by PMMA particles in calvariae. This work highlights the significance of angiogenesis, specifically VEGF, as key driver of PMMA particle-induced inflammatory osteolysis, inhibition of which attenuates this response.

Rapid mineralization of hierarchical poly(l-lactic acid)/poly(ε-caprolactone) nanofibrous scaffolds by electrodeposition for bone regeneration

Introduction: Hierarchical nanofibrous scaffolds are emerging as a promising bone repair material due to their high cell adhesion activity and nutrient permeability. However, the existing method for hierarchical nanofibrous scaffolds fabrication is complicated and not perfectly suitable for further biomedical application in view of both structure and function. In this study, we constructed a hierarchical nanofibrous poly (l-lactic acid)/poly(ε-caprolactone) (PLLA/PCL) scaffold and further evaluated its bone healing ability. Methods: The hierarchical PLLA/PCL nanofibrous scaffold (PLLA/PCL) was prepared by one-pot TIPS and then rapidly mineralized at room temperature by an electrochemical deposition technique. After electrode-positioning at 2 V for 2 hrs, a scaffold coated with hydroxyapatite (M-PLLA/PCL) could be obtained. Results: The pore size of the M-PLLA/PCL scaffold was hierarchically distributed so as to match the biophysical structure for osteoblast growth. The M-PLLA/PCL scaffold showed better cell proliferation and osteogenesis activity compared to the PLLA/PCL scaffold. Further in vivo bone repair studies indicated that the M-PLLA/PCL scaffold could accelerate defect healing in 12 weeks. Conclusion: The results of this study implied that the as-prepared hydroxyapatite coated hierarchical PLLA/PCL nanofibrous scaffolds could be developed as a promising material for efficient bone tissue repair after carefully tuning the TIPS and electrodeposition parameters.

Metformin protects bone mass in ultra-high-molecular-weight polyethylene particle-induced osteolysis by regulating osteocyte secretion

Metformin, an anti-hyperglycemic agent used for type 2 diabetes, has recently been found to have more effects apart from glucose regulation. We found that, in ultra-high-molecular-weight polyethylene particle-induced osteolysis mouse models, metformin had bone protect property and reduced the negative regulator of bone formation sclerostin (SOST) and Dickkopf-related protein 1 (DKK1), and increased osteoprotegerin (OPG) secretion and the ratio of OPG/Receptor Activator for Nuclear Factor-κB Ligand (RANKL). In vitro, we established a 3D co-culture system in which metformin affects osteoblasts and osteoclasts through mature osteocytes secretion. Metformin (50 μM) significantly decreased SOST and DKK1 mRNA expression, stimulating alkaline phosphatase activity and proliferation of osteoblast, and increased OPG secretion and the ratio of OPG/RANKL, inhibiting osteoclastogenesis. Moreover, the effect on OPG was reversed by adenosine 5'-monophosphate-activated protein kinase inhibitor, Compound C. Our finding suggests that metformin induces differentiation and mineralization of osteoblasts, while inhibits osteoclastogenesis via mature osteocytes secretion. Therefore, the drug might be beneficial for not only diabetes but also in other bone disorders by acting on mature osteocytes.

MACF1 Overexpression by Transfecting the 21 kbp Large Plasmid PEGFP-C1A-ACF7 Promotes Osteoblast Differentiation and Bone Formation

Microtubule actin crosslinking factor 1 (MACF1) is a large spectraplakin protein known to have crucial roles in regulating cytoskeletal dynamics, cell migration, growth, and differentiation. However, its role and action mechanism in bone remain unclear. The present study investigated optimal conditions for effective transfection of the large plasmid PEGFP-C1A-ACF7 (∼21 kbp) containing full-length human MACF1 cDNA, as well as the potential role of MACF1 in bone formation. To enhance MACF1 expression, the plasmid was transfected into osteogenic cells by electroporation in vitro and into mouse calvaria with nanoparticles. Then, transfection efficiency, osteogenic marker expression, calvarial thickness, and bone formation were analyzed. Notably, MACF1 overexpression triggered a drastic increase in osteogenic gene expression, alkaline phosphatase activity, and matrix mineralization in vitro. Mouse calvarial thickness, mineral apposition rate, and osteogenic marker protein expression were significantly enhanced by local transfection. In addition, MACF1 overexpression promoted β-catenin expression and signaling. In conclusion, MACF1 overexpression by transfecting the large plasmid containing full-length MACF1 cDNA promotes osteoblast differentiation and bone formation via β-catenin signaling. Current data will provide useful experimental parameters for the transfection of large plasmids and a novel strategy based on promoting bone formation for prevention and therapy of bone disorders.

Direct Effects of Nicotine Exposure on Murine Calvaria and Calvarial Cells

Despite the link between adverse birth outcomes due to pre- and peri-natal nicotine exposure, research suggests 11% of US women continue to smoke or use alternative nicotine products throughout pregnancy. Maternal smoking has been linked to incidence of craniofacial anomalies. We hypothesized that pre-natal nicotine exposure may directly alter craniofacial development independent of the other effects of cigarette smoking. To test this hypothesis, we administered pregnant C57BL6 mice drinking water supplemented with 0, 50, 100 or 200 μg/ml nicotine throughout pregnancy. On postnatal day 15 pups were sacrificed and skulls underwent micro-computed tomography (µCT) and histological analyses. Specific nicotinic acetylcholine receptors, α3, α7, β2, β4 were identified within the calvarial growth sites (sutures) and centers (synchondroses). Exposing murine calvarial suture derived cells and isotype cells to relevant circulating nicotine levels alone and in combination with nicotinic receptor agonist and antagonists resulted in cell specific effects. Most notably, nicotine exposure increased proliferation in calvarial cells, an effect that was modified by receptor agonist and antagonist treatment. Currently it is unclear what component(s) of cigarette smoke is causative in birth defects, however these data indicate that nicotine alone is capable of disrupting growth and development of murine calvaria.

Effects of combined menaquinone-4 and PTH1-34 treatment on osetogenesis and angiogenesis in calvarial defect in osteopenic rats

PURPOSE

The aim of this study was to evaluate the effect of combining human parathyroid hormone (1-34) (PTH_1-34; PTH) and menaquinone-4 (MK-4) on calvarial bone defect repair in osteopenic rats.

METHODS

Fourteen week olds were subject to craniotomy for the establishment of osteopenic animal models fed through a chronically low-protein diet. After that, critical calvarial defect model was established and all rats were randomly divided into four groups: sham, MK-4, PTH, and PTH + MK-4. The animals received MK-4 (30 mg/kg/day), PTH_1-34 (60 μg/kg, three times a week), or PTH_1-34 (60 μg/kg, three times a week) plus MK-4 (30 mg/kg/day) for 8 weeks, respectively. Serum γ-carboxylated osteocalcin (Gla-OC) levels, histological and immunofluorescent labeling were employed to evaluate the bone formation and mineralization in calvarial bone defect. In addition, Microfil perfusion, immunohistochemical, and micro-CT suggested enhanced angiogenesis and bone formation in calvarial bone healing.

RESULTS

In this study, treatment with either PTH_1-34 or MK-4 promoted bone formation and vascular formation in calvarial bone defects compared with the sham group. In addition, combined treatment of PTH_1-34 plus MK-4 increased serum level of Gla-OC, improved vascular number and vascular density, and enhanced bone formation in calvarial bone defect in osteopenic conditions as compared with monotherapy.

CONCLUSIONS

In summary, this study indicated that PTH_1-34 plus MK-4 combination therapy accelerated bone formation and angiogenesis in calvarial bone defects in presence of osteopenia.

Injectable PLGA microspheres with tunable magnesium ion release for promoting bone regeneration

Magnesium ions (Mg²⁺) are bioactive and proven to promote bone tissue regeneration, in which the enhancement efficiency is closely related to Mg²⁺ concentrations. Currently, there are no well-established bone tissue engineering scaffolds that can precisely control Mg²⁺ release, although this capability could have a marked impact in bone regeneration. Leveraging the power of biodegradable microspheres to control the release of bioactive factors, we developed lactone-based biodegradable microspheres that served as both injectable scaffolds and Mg²⁺ release system for bone regeneration. The biodegradable microsphere (PMg) was prepared from poly(lactide-co-glycolide) (PLGA) microspheres co-embedded with MgO and MgCO₃ at a fixed total loading amount (20 wt%) with different weight ratios (1:0; 3:1; 1:1; 1:3; 0:1). The PMg microspheres demonstrated controlled release of Mg²⁺ by tuning the MgO/MgCO₃ ratios. Specifically, faster release with higher initial concentrations of Mg²⁺ were detected at higher MgO fractions, while long-term sustained release with lower concentrations of Mg²⁺ was obtained at higher MgCO₃ fractions. All prepared PMg microspheres were non-cytotoxic. Furthermore, they promoted attachment, proliferation, osteogenic differentiation, especially, cell migration of bone marrow mesenchymal stromal cells (BMSCs). Among these microspheres, PMg-III microspheres (MgO/MgCO₃ in 1:1) exhibited the strongest promotion of mineral depositions and osteogenic differentiation of BMSCs. PMg-III microspheres were injected into the critical-sized calvarial defect of a rat model, resulting in significant bone regeneration when compared to the control group filled with PLGA microspheres. In the PMg-III group, the new bone volume fraction (BV/TV) and bone mineral density (BMD) reached 32.9 ± 5.6% and 325.7 ± 20.2 mg/cm³, respectively, which were much higher than the values 8.1 ± 2.5% (BV/TV) and 124 ± 35.8 mg/cm³ (BMD) in the PLGA group. These findings indicated that bioresorbable microspheres possessing controlled Mg²⁺ release features were efficient in treating bone defects and promising for future in vivo applications. STATEMENT OF SIGNIFICANCE: Magnesium plays pivotal roles in regulating osteogenesis, which exhibits concentration-dependent behaviors. However, no generally accepted controlled-release system is reported to correlate Mg²⁺ concentration with efficient bone regeneration. Biodegradable microspheres with injectability are excellent cell carriers for tissue engineering, moreover, good delivery systems for bioactive factors. By co-embedding magnesium compounds (MgO, MgCO₃) with different dissolution rates in various ratios, tunable release of Mg²⁺ from the microspheres was readily achieved. Accordingly, significant promotion in bone defect regeneration is achieved with microspheres displaying proper sustained release of Mg²⁺. The developed strategy may serve as valuable guidelines for bone tissue engineering scaffold design, which allows precise control on the release of bioactive metal ions like Mg²⁺ toward potential clinical translation.

Combination of a Bioceramic Scaffold and Simvastatin Nanoparticles as a Synthetic Alternative to Autologous Bone Grafting

The fragile nature of porous bioceramic substitutes cannot match the toughness of bone, which limits the use of these materials in clinical load-bearing applications. Statins can enhance bone healing, but it could show rhabdomyolysis/inflammatory response after overdosing. In this study, the drug-containing bone grafts were developed from poly(lactic acid-co-glycolic acid)-polyethylene glycol (PLGA-PEG) nanoparticles encapsulating simvastatin (SIM) (SIM-PP NPs) loaded within an appropriately mechanical bioceramic scaffold (BC). The combination bone graft provides dual functions of osteoconduction and osteoinduction. The mechanical properties of the bioceramic are enhanced mainly based on the admixture of a combustible reverse-negative thermoresponsive hydrogel (poly(N-isopropylacrylamide base). We showed that SIM-PP NPs can increase the activity of alkaline phosphatase and osteogenic differentiation of bone marrow stem cells. To verify the bone-healing efficacy of this drug-containing bone grafts, a nonunion radial endochondral ossification bone defect rabbit model (N = 3/group) and a nonunion calvarial intramembranous defect Sprague Dawley (SD) rat model (N = 5/group) were used. The results indicated that SIM-PP NPs combined with BC can improve the healing of nonunion bone defects of the radial bone and calvarial bone. Therefore, the BC containing SIM-PP NPs may be appropriate for clinical use as a synthetic alternative to autologous bone grafting that can overcome the problem of determining the clinical dosage of simvastatin drugs to promote bone healing.

Head skeleton malformations in zebrafish (Danio rerio) to assess adverse effects of mixtures of compounds

The EU-EuroMix project adopted the strategy of the European Food Safety Authority (EFSA) for cumulative risk assessment, which limits the number of chemicals to consider in a mixture to those that induce a specific toxicological phenotype. These so-called cumulative assessment groups (CAGs) are refined at several levels, including the target organ and specific phenotype. Here, we explore the zebrafish embryo as a test model for quantitative evaluation in one such CAG, skeletal malformations, through exposure to test compounds 0-120 hpf and alcian blue cartilage staining at 120 hpf, focusing on the head skeleton. Reference compounds cyproconazole, flusilazole, metam, and thiram induced distinctive phenotypes in the head skeleton between the triazoles and dithiocarbamates. Of many evaluated parameters, the Meckel's-palatoquadrate (M-PQ) angle was selected for further assessment, based on the best combination of a small confidence interval, an intermediate maximal effect size and a gentle slope of the dose-response curve with cyproconazole and metam. Additional test compounds included in the CAG skeletal malformations database were tested for M-PQ effects, and this set was supplemented with compounds associated with craniofacial malformations or cleft palate to accommodate otherwise organized databases. This additional set included hexaconazole, all-trans-retinoic acid, AM580, CD3254, maneb, pyrimethanil, imidacloprid, pirimiphos-methyl, 2,4-dinitrophenol, 5-fluorouracil, 17alpha-ethynylestradiol (EE2), ethanol, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), PCB 126, methylmercury, boric acid, and MEHP. Most of these compounds produced a dose-response for M-PQ effects. Application of the assay in mixture testing was provided by combined exposure to cyproconazole and TCDD through the isobole method, supporting that in this case the combined effect can be modeled through concentration addition.