Grafting of dermatan sulfate on polyethylene terephtalate to enhance biointegration

Bio-inspired hemocompatible surface modifications for biomedical applications

When blood first encounters the artificial surface of a medical device, a complex series of biochemical reactions is triggered, potentially resulting in clinical complications such as embolism/occlusion, inflammation, or device failure. Preventing thrombus formation on the surface of blood-contacting devices is crucial for maintaining device functionality and patient safety. As the number of patients reliant on blood-contacting devices continues to grow, minimizing the risk associated with these devices is vital towards lowering healthcare-associated morbidity and mortality. The current standard clinical practice primarily requires the systemic administration of anticoagulants such as heparin, which can result in serious complications such as post-operative bleeding and heparin-induced thrombocytopenia (HIT). Due to these complications, the administration of antithrombotic agents remains one of the leading causes of clinical drug-related deaths. To reduce the side effects spurred by systemic anticoagulation, researchers have been inspired by the hemocompatibility exhibited by natural phenomena, and thus have begun developing medical-grade surfaces which aim to exhibit total hemocompatibility via biomimicry. This review paper aims to address different bio-inspired surface modifications that increase hemocompatibility, discuss the limitations of each method, and explore the future direction for hemocompatible surface research.

Furcellaran Surface Deposition and Its Potential in Biomedical Applications

Surface coatings of materials by polysaccharide polymers are an acknowledged strategy to modulate interfacial biocompatibility. Polysaccharides from various algal species represent an attractive source of structurally diverse compounds that have found application in the biomedical field. Furcellaran obtained from the red algae Furcellaria lumbricalis is a potential candidate for biomedical applications due to its gelation properties and mechanical strength. In the present study, immobilization of furcellaran onto polyethylene terephthalate surfaces by a multistep approach was studied. In this approach, N-allylmethylamine was grafted onto a functionalized polyethylene terephthalate (PET) surface via air plasma treatment. Furcellaran, as a bioactive agent, was anchored on such substrates. Surface characteristics were measured by means of contact angle measurements, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Subsequently, samples were subjected to selected cell interaction assays, such as antibacterial activity, anticoagulant activity, fibroblasts and stem cell cytocompatibility, to investigate the Furcellaran potential in biomedical applications. Based on these results, furcellaran-coated PET films showed significantly improved embryonic stem cell (ESC) proliferation compared to the initial untreated material.

Surface Functionalities of Polymers for Biomaterial Applications

Changes of a material biointerface allow for specialized cell signaling and diverse biological responses. Biomaterials incorporating immobilized bioactive ligands have been widely introduced and used for tissue engineering and regenerative medicine applications in order to develop biomaterials with improved functionality. Furthermore, a variety of physical and chemical techniques have been utilized to improve biomaterial functionality, particularly at the material interface. At the interface level, the interactions between materials and cells are described. The importance of surface features in cell function is then examined, with new strategies for surface modification being highlighted in detail.

Advancements in modification of membrane materials over membrane separation for biomedical applications-Review

A comprehensive overview of various modifications carried out on polymeric membranes for biomedical applications has been presented in this review paper. In particular, different methods of carrying out these modifications have been discussed. The uniqueness of the review lies in the sense that it discusses the surface modification techniques traversing the timeline from traditionally well-established technologies to emerging new techniques, thus giving an intuitive understanding of the evolution of surface modification techniques over time. A critical comparison of the advantages and pitfalls of commonly used traditional and emerging surface modification techniques have been discussed. The paper also highlights the tuning of specific properties of polymeric membranes that are critical for their increased applications in the biomedical industry specifically in drug delivery, along with current challenges faced and where the future potential of research in the field of surface modification of membranes.

Endothelialization of cardiovascular devices

Blood-contacting surfaces of cardiovascular devices are not biocompatible for creating an endothelial layer on them. Numerous research studies have mainly sought to modify these surfaces through physical, chemical and biological means to ease early endothelial cell (EC) adhesion, migration and proliferation, and eventually to build an endothelial layer on the surfaces. The first priority for surface modification is inhibition of protein adsorption that leads to inhibition of platelet adhesion to the device surfaces, which may favor EC adhesion. Surface modification through surface texturing, if applicable, can bring some hopeful outcomes in this regard. Surface modifications through chemical and/or biological means may play a significant role in easy endothelialization of cardiovascular devices and inhibit smooth muscle cell proliferation. Cellular engineering of cells relevant to endothelialization can boost the positive outcomes obtained through surface engineering. This review briefly summarizes recent developments and research in early endothelialization of cardiovascular devices. STATEMENT OF SIGNIFICANCE: Endothelialization of cardiovascular implants, including heart valves, vascular stents and vascular grafts is crucial to solve many problems in our health care system. Numerous research efforts have been made to improve endothelialization on the surfaces of cardiovascular implants, mainly through surface modifications in three ways - physically, chemically and biologically. This review is intended to highlight comprehensive research studies to date on surface modifications aiming for early endothelialization on the blood-contacting surfaces of cardiovascular implants. It also discusses future perspectives to help guide endothelialization strategies and inspire further innovations.

Glycosaminoglycan and Proteoglycan-Based Biomaterials: Current Trends and Future Perspectives

Proteoglycans and their glycosaminoglycans (GAG) are essential for life as they are responsible for orchestrating many essential functions in development and tissue homeostasis, including biophysical properties and roles in cell signaling and extracellular matrix assembly. In an attempt to capture these biological functions, a range of biomaterials are designed to incorporate off-the-shelf GAGs, typically isolated from animal sources, for tissue engineering, drug delivery, and regenerative medicine applications. All GAGs, with the exception of hyaluronan, are present in the body covalently coupled to the protein core of proteoglycans, yet the incorporation of proteoglycans into biomaterials remains relatively unexplored. Proteoglycan-based biomaterials are more likely to recapitulate the unique, tissue-specific GAG profiles and native GAG presentation in human tissues. The protein core offers additional biological functionality, including cell, growth factor, and extracellular matrix binding domains, as well as sites for protein immobilization chemistries. Finally, proteoglycans can be recombinantly expressed in mammalian cells and thus offer genetic manipulation and metabolic engineering opportunities for control over the protein and GAG structures and functions. This Progress Report summarizes current developments in GAG-based biomaterials and presents emerging research and future opportunities for the development of biomaterials that incorporate GAGs presented in their native proteoglycan form.

Protein selective adsorption properties of a polyethylene terephtalate artificial ligament grafted with poly(sodium styrene sulfonate) (polyNaSS): correlation with physicochemical parameters of proteins

Immediately after surgical placement of biomaterials, a first step consists in the adsorption of proteins from the biological environment on the artificial surfaces. Because the composition of the adsorbed protein layer modulates the cell response to the implanted material, researchers in the biomaterials field have focused on coating proteins or peptides onto surfaces to improve cell response and therefore the long-term compatibility of the implant. However, some materials used in tissue engineering, mainly synthetic polymers, are too hydrophobic to allow the optimal adsorption of proteins and have to be first submitted to physical or chemical treatments. In our laboratory, we have demonstrated that grafting of poly(sodium styrene sulfonate) (polyNaSS) onto biomaterials can strongly modulate the protein adsorption and the cellular response compared to unmodified surfaces. In this study, we used a liquid chromatography strategy coupled to proteomics to evaluate the adsorptive properties of a polyethylene terephtalate (PET) artificial ligament grafted with polyNaSS, and to identify and analyse proteins adsorbed on PET fibers. Results obtained with platelet rich plasma (PRP) proteins demonstrated that grafting significantly increases the protein adsorption of the PET and also selectively modulates the adsorption of proteins on PET fibers. Finally, regarding physicochemical parameters calculated from the amino acid sequence of identified proteins, we found that the aliphatic index is highly correlated with the selective adsorption of proteins onto the polyNaSS/PET surface. Therefore, the proteomic approach complemented with physicochemical property evaluation could provide a powerful tool for the elaboration of new biomaterials based on protein layer deposition.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Biomedical coatings on polyethylene terephthalate artificial ligaments

This review comprehensively covers research conducted to enhance polyethylene terephthalate (PET) artificial ligament osseointegration in the bone tunnel. These strategies, using biocompatible or bioactive coatings, had a positive effect in promoting PET ligament osseointegration by increasing bone formation and decreasing fibrous scar tissue at the ligament-to-bone interface. The improved osseointegration can be translated into a significant increase in the biomechanical pull-out loads. However, the load-to-failure of coated ligament is far lower than that of native ACL. Coatings to promote intra-articular ligamentization are also discussed in this study. Collectively, our investigations may arouse further study of the biological coating of PET artificial ligaments in order to effectively enhance ligament osseointegration and promote artificial ligament ligamentization.

Hemocompatibility and anti-biofouling property improvement of poly(ethylene terephthalate) via self-polymerization of dopamine and covalent graft of zwitterionic cysteine

Inspired by the composition of adhesive proteins in mussels, we used self-polymerized dopamine to form a thin and surface-adherent polydopamine layer onto poly(ethylene terephthalate) (PET) sheet, followed by covalent grafting cysteine (Cys) to improve hemocompatibility and anti-biofouling property. The obtained surfaces were characterized by water contact angle measurements (WCA), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS) analysis. The results of platelet adhesion and protein adsorption tests showed that cysteine immobilized PET was endowed with improved resistance to nonspecific protein adsorption and platelet adhesion. The results of hemolysis rate test showed cysteine grafted PET (PET-g-Cys) had low hemolytic ability. Cell assay results showed that PET-g-Cys surface could greatly inhibit HeLa cell adhesion. These works provide an ideal hemocompatible and antifouling surface for biomedical applications.

Plasma-based biofunctionalization of vascular implants

Polymeric and metallic materials are used extensively in permanently implanted cardiovascular devices and devices that make temporary but often prolonged contact with body fluids and tissues. Foreign body responses are typically triggered by host interactions at the implant surface, making surface modifications to increase biointegration desirable. Plasma-based treatments are extensively used to modify diverse substrates; modulating surface chemistry, wettability and surface roughness, as well as facilitating covalent biomolecule binding. Each aspect impacts on facets of vascular compatibility including endothelialization and blood contact. These modifications can be readily applied to polymers such as Dacron® and expanded polytetrafluoroethylene, which are widely used in bypass grafting and the metallic substrates of stents, valves and pacemaker components. Plasma modification of metals is more challenging given the need for coating deposition in addition to surface activation, adding the necessity for robust interface adhesion. This review examines the evolving plasma treatment technology facilitating the biofunctionalization of polymeric and metallic implantable cardiovascular materials.

Sugar-coating wound repair: a review of FGF-10 and dermatan sulfate in wound healing and their potential application in burn wounds

Thousands of patients suffer from burn injuries each year, yet few therapies have been developed to accelerate the wound healing process. Most fibroblast growth factors (FGFs) have been extensively evaluated but only a few have been found to participate in the wound healing process. In particular, FGF-10 is robustly increased in the wound microenvironment after injury and has demonstrated some ability to promote wound healing in vitro and in vivo. Glycosaminoglycans are linear carbohydrates that participate in wound repair by influencing cytokine/growth factor localization and interaction with cognate receptors. Dermatan sulfate (DS) is the most abundant glycosaminoglycan in human wound fluid and has been postulated to be directly involved in the healing process. Recently, the combination of FGF-10 and DS demonstrated the potential to accelerate wound healing via increased keratinocyte proliferation and migration. Based on these preliminary studies, DS may serve as a cofactor for FGF-10, and together they are likely to expedite the healing process by stimulating keratinocyte activity. As a specific subtype of wounds, the overall healing process of burn injuries does not significantly differ from other types of wounds, where optimal repair results in matrix regeneration and complete reepithelialization. At present, standard burn treatment primarily involves topical application of antimicrobial agents, while no routine therapies target acceleration of reepithelialization, the key to wound closure. Thus, this novel therapeutic combination could be used in conjunction with some of the current therapies, but it would have the unique ability to initiate wound healing by stimulating keratinocyte epithelialization.