Injectable Schiff base polysaccharide hydrogels for intraocular drug loading and release

Synthesis and real-time characterization of self-healing, injectable, fast-gelling hydrogels based on alginate multi-reducing end polysaccharides (MREPs)

Polysaccharide-based hydrogels are promising for many biomedical applications including drug delivery, wound healing, and tissue engineering. We illustrate herein self-healing, injectable, fast-gelling hydrogels prepared from multi-reducing end polysaccharides, recently introduced by the Edgar group. Simple condensation of reducing ends from multi-reducing end alginate (M-Alg) with amines from polyethylene imine (PEI) in water affords a dynamic, hydrophilic polysaccharide network. Trace amounts of acetic acid can accelerate the gelation time from hours to seconds. The fast-gelation behavior is driven by rapid Schiff base formation and strong ionic interactions induced by acetic acid. A cantilever rheometer enables real-time monitoring of changes in viscoelastic properties during hydrogel formation. The reversible nature of these crosslinks (imine bonds, ionic interactions) provides a hydrogel with low toxicity in cell studies as well as self-healing and injectable properties. Therefore, the self-healing, injectable, and fast-gelling M-Alg/PEI hydrogel holds substantial promise for biomedical, agricultural, controlled release, and other applications.

Enzyme-triggered transcytosis of drug carrier system for deep penetration into hepatoma tumors

In recent years, nano-drug delivery systems have made considerable progress in the direction of tumor treatment, but the low permeability of drugs has restricted the development of nano drugs. To solve this problem, we constructed a nano-drug delivery system with the dual effects of γ-glutamyltransferase (GGT) reaction and high nuclear targeting in tumor microenvironment to promote the deep penetration of drugs. Over-expression of GGT in tumor cells can specifically recognize γ-glutamyl substrate and release amino group from the hydrolysis reaction, which makes the whole system change from negative or neutral to positive charge system. The conjugated complex with positive charge rapidly endocytosis through electrostatic interaction, enhancing its permeability in tumor parenchyma. At the same time, the cell penetrating TAT contains a large amount of lysine, which can be identified by the nuclear pore complexes (NPCs) on the surface of the nuclear membrane, showing excellent nuclear localization function. The active DOX is released in the nucleus, which inhibits the mitosis of cancer cells and enhances the active transport ability of drugs in tumor cells. Therefore, this drug delivery system actively transports adriamycin into the tumor to achieve deep penetration of drugs through enzyme response and nuclear targeting, showing high anti-tumor activity and can be effectively applied to the treatment of liver cancer.

An injectable hydrogel based on hyaluronic acid prepared by Schiff base for long-term controlled drug release

Drug-loaded injectable hydrogels have been studied widely in biomedical technology while the stable long-term controlled drug release and cytotoxicity are challenges. In this work, an injectable hydrogel with good swelling resistance was in situ synthetized using aminated hyaluronic acid (NHA) and aldehyde β-cyclodextrin (ACD) via Schiff-base reaction. The composition, morphology and mechanical property were characterized with FTIR, ¹³C NMR, SEM and rheology test, respectively. Voriconazole (VCZ) and Endophthalmitis was selected as a model drug and disease, respectively. The drug release, cytotoxicity and antifungal properties were detected in vitro. The results showed a long-term (> 60 days) drug release was realized, the NHA/ACD2/VCZ presented a zero-order release in the later stage. The cytotoxicity of NHA/ACD was detected by live/dead staining assay and Cell Counting Kit-8 (CCK-8). The survival rate of adult retina pigment epithelial cell line-19 (ARPE-19) was over 100 % after 3 d, it indicated a good cytocompatibility. The antifungal experiment presented samples had antifungal property. Biocompatibility in vivo proved NHA/ACD2 had no adverse effects on ocular tissues. Consequently, the injectable hydrogel based on hyaluronic acid prepared by Schiff base reaction provides a new option for long-term controlled drug release in the course of disease treatment from a material perspective.

Cyclodextrin regulated natural polysaccharide hydrogels for biomedical applications-a review

Cyclodextrin and its derivative (CDs) are natural building blocks for linking with other components to afford functional biomaterials. Hydrogels are polymer network systems that can form hydrophilic three-dimensional network structures through different cross-linking methods and are developing as potential materials in biomedical applications. Natural polysaccharide hydrogels (NPHs) are widely adopted in biomedical field with good biocompatibility, biodegradability, low cytotoxicity, and versatility in emulating natural tissue properties. Compared with conventional NPHs, CD regulated natural polysaccharide hydrogels (CD-NPHs) maintain good biocompatibility, while improving poor mechanical qualities and unpredictable gelation times. Recently, there has been increasing and considerable usage of CD-NPHs while there is still no review comprehensively introducing their construction, classification, and application of these hydrogels from the material point of view regarding biomedical fields. To draw a complete picture of the current and future development of CD-NPHs, we systematically overview the classification of CD-NPHs, and provide a holistic view on the role of CD-NPHs in different biomedical fields, especially in drug delivery, wound dressing, cell encapsulation, and tissue engineering. Moreover, the current challenges and prospects of CD-NPHs are discussed rationally, providing an insight into developing vibrant fields of CD-NPHs-based biomedicine, and facilitating their translation from bench to clinical medicine.

Injectable Nanocomposite Hydrogels for Cancer Therapy

Hydrogel is a kind of 3D polymer network with strong swelling ability in water and appropriate mechanical and biological properties, which make it feasible to maintain bioactive substances and has promising applications in the fields of biomaterials, soft machines, and artificial tissues. Unfortunately, traditional hydrogels prepared by chemical crosslinking have poor mechanical properties and limited functions, which limit their further application. In recent years, with the continuous development of nanoparticle research, more and more studies have combined nanoparticles with hydrogels to make up for the shortcomings of traditional hydrogels. In this article, the types and functions of hydrogels and nanomaterials are introduced first, as well as the functions and applications of injectable nanocomposite hydrogels (INHs), then the latest progress of INHs for cancer treatment is reviewed, some existing problems are summarized, and the application prospect of NHs is prospected.

Enhenced cell adhesion on collagen I treated parylene-C microplates

On account of unique mechanical property and inertia, parylene-C has become a promising material for microdevices especially in three-dimensional microstructures loaded with cells. However, parylene-C is not favorable for cell adhesion, and a routine procedure is to modify it with a new adhesive layer. Herein, the parylene-C substrates with or without collagen Ӏ (Col-I) coating were adopted to estimate the influence of micro-environment change on cell attachment and spreading. After modification with Col-I, cauliflower-like particles presented on the substrate surface. Contact angle was significantly decreased after Col-I modification, which suggested the surface hydrophilicity was enhanced. Furthermore, cells cultured on parylene-C surface with Col-I treatment showed increased proliferation rate and spreading areas. In order to test the adhesion strength, a series of fixed size parylene-C microplates was fabricated, and cell suspension concentration was adjusted to culture a single cell on one microplate. The microplate was folded by the autogenous shrinkage force of cell. The folding angles of parylene-C microplates with Col-I treatment exhibited higher folding angle (112.6 ± 15.6°) than untreated samples (46.7 ± 5.9°). The work proved the existence of Col-I layer was particularly important, especially in analysis of cells mechanics using parylene-C microplate as a substrate.

Engineering Polysaccharides for Tissue Repair and Regeneration

The success of repair or regeneration depends greatly on the architecture of 3D scaffolds that finely mimic natural extracellular matrix to support cell growth and assembly. Polysaccharides have excellent biocompatibility with intrinsic biological cues and they have been extensively investigated as scaffolds for tissue engineering and regenerative medicine (TERM). The physical and biochemical structures of natural polysaccharides, however, can barely meet all the requirements of tissue-engineered scaffolds. To take advantage of their inherent properties, many innovative approaches including chemical, physical, or joint modifications have been employed to improve their properties. Recent advancement in molecular and material building technology facilitates the fabrication of advanced 3D structures with desirable properties. This review focuses on the latest progress of polysaccharide-based scaffolds for TERM, especially those that construct advanced architectures for tissue regeneration.

Hydrogel Properties and Their Impact on Regenerative Medicine and Tissue Engineering

Hydrogels (HGs), as three-dimensional structures, are widely used in modern medicine, including regenerative medicine. The use of HGs in wound treatment and tissue engineering is a rapidly developing sector of medicine. The unique properties of HGs allow researchers to easily modify them to maximize their potential. Herein, we describe the physicochemical properties of HGs, which determine their subsequent applications in regenerative medicine and tissue engineering. Examples of chemical modifications of HGs and their applications are described based on the latest scientific reports.

Chitosan and its Derivatives for Ocular Delivery Formulations: Recent Advances and Developments

Chitosan (CS) is a hemi-synthetic cationic linear polysaccharide produced by the deacetylation of chitin. CS is non-toxic, highly biocompatible, and biodegradable, and it has a low immunogenicity. Additionally, CS has inherent antibacterial properties and a mucoadhesive character and can disrupt epithelial tight junctions, thus acting as a permeability enhancer. As such, CS and its derivatives are well-suited for the challenging field of ocular drug delivery. In the present review article, we will discuss the properties of CS that contribute to its successful application in ocular delivery before reviewing the latest advances in the use of CS for the development of novel ophthalmic delivery systems. Colloidal nanocarriers (nanoparticles, micelles, liposomes) will be presented, followed by CS gels and lenses and ocular inserts. Finally, instances of CS coatings, aiming at conferring mucoadhesiveness to other matrixes, will be presented.

Preparation of injectable hydrogel with near-infrared light response and photo-controlled drug release

Photo-controlled release hydrogel provides a new strategy for treating tumours. Under the stimulation of external light sources, the ability to release the entrapped drug on time and space on demand has outstanding advantages in improving drug utilisation, optimising treatment, and reducing toxicity and side effects. In this study, a photo-controlled drug delivery system for disulphide cross-linked polyaspartic acid (PASP-SS) hydrogels encapsulating proteinase K (ProK) adsorbed with platinum nanoparticles (PtNPs) was designed. The injectable cysteamine-modified polyaspartic acid (PASP-SH) sol and PtNPs adsorbed by ProK (ProK-PtNPs) as regulatory factors were prepared. Then, ProK-PtNPs and lentinan were dissolved in the sol, and the oxidant was added to the matrix to form the gel in situ quickly after injection. Finally, the degradation of PASP-SS hydrogel by ProK and the controllability of drug release under near-infrared (NIR) light irradiation were elucidated. In vitro degradation of hydrogels and drug release experiments showed that the degradation rate of PASP-SS hydrogel significantly increased and the drug release rate increased significantly under near-infrared radiation. The results of cytotoxicity test showed that PASP-SS, ProK-PtNPs, and lentinan all had more than 90% cell survival rate on NIH3T3, and the lentinan released from the carrier obviously inhibited the proliferation of MCF7. PASP hydrogel has the potential to respond to on-demand light control.

Hydrogels as Potential Nano-, Micro- and Macro-Scale Systems for Controlled Drug Delivery

This review is an extensive evaluation and essential analysis of the design and formation of hydrogels (HGs) for drug delivery. We review the fundamental principles of HGs (their chemical structures, physicochemical properties, synthesis routes, different types, etc.) that influence their biological properties and medical and pharmaceutical applications. Strategies for fabricating HGs with different diameters (macro, micro, and nano) are also presented. The size of biocompatible HG materials determines their potential uses in medicine as drug carriers. Additionally, novel drug delivery methods for enhancing treatment are discussed. A critical review is performed based on the latest literature reports.