Novel three-dimensional scaffolds of poly(L-lactic acid) microfibers using electrospinning and mechanical expansion: Fabrication and bone regeneration

Nitrogen-Doped Diamond-like Coatings for Long-Term Enhanced Cell Adhesion on Electrospun Poly(ε-caprolactone) Scaffold Surfaces

Electrospun poly(ε-caprolactone) (PCL)-based scaffolds are widely used in tissue engineering. However, low cell adhesion remains the key drawback of PCL scaffolds. It is well known that nitrogen-doped diamond-like carbon (N-DLC) coatings deposited on the surface of various implants are able to enhance their biocompatibility and functional properties. Herein, we report the utilization of the pulsed vacuum arc deposition (PVAD) technique for the fabrication of thin N-DLC coatings on the surface of electrospun PCL scaffolds. The effect of N-DLC coating deposition under various nitrogen pressures on the morphological, mechanical, physico-chemical, and biological properties of PCL scaffolds was investigated. It was established that an increase in nitrogen pressure in the range from 5 × 10-3 to 5 × 10-1 Pa results in up to a 10-fold increase in the nitrogen content and a 2-fold increase in the roughness of the PCL fiber surface. These factors provided the conditions for the enhanced adhesion and proliferation of human mesenchymal stem cells (MMSCs) on the surface of the modified PCL scaffolds. Importantly, the preservation of N-DLC coating properties determines the shelf life of a coated medical device. The elemental composition, tensile strength, and surface human MMSC adhesion were studied immediately after fabrication and after 6 months of storage under normal conditions. The enhanced MMSC adhesion was preserved after 6 months of storage of the modified PCL-based scaffolds under normal conditions.

Research Advances in Electrospun Nanofiber Membranes for Non-Invasive Medical Applications

Non-invasive medical nanofiber technology, characterized by its high specific surface area, biocompatibility, and porosity, holds significant potential in various medical domains, including tissue repair and biosensing. It is increasingly becoming central to healthcare by offering safer and more efficient treatment options for contemporary medicine. Numerous studies have explored non-invasive medical nanofibers in recent years, yet a comprehensive overview of the field remains lacking. In this paper, we provide a comprehensive summary of the applications of electrospun nanofibers in non-invasive medical fields, considering multiple aspects and perspectives. Initially, we introduce electrospinning nanofibers. Subsequently, we detail their applications in non-invasive health, including health monitoring, personal protection, thermal regulation, and wound care, highlighting their critical role in improving human health. Lastly, this paper discusses the current challenges associated with electrospun nanofibers and offers insights into potential future development trajectories.

Electrospun poly(lactic acid) membranes with defined pore size to enhance cell infiltration

Electrospun membranes are compact structures with small pore sizes that hinder cell infiltration, resulting in membranes with cells attached only to the external surface rather than throughout the entire volume. Thus, there is a need to increase the pore size of electrospun membranes maintaining their structural similarity to the extracellular matrix. In this work, we used glucose crystals embedded in polyethylene oxide (PEO) fibers to create large pores in poly(lactic acid) (PLA) electrospun membranes to allow for cellular infiltration. The PEO fibers containing glucose crystals of different sizes (>50, 50-100 and 100-150 μm) and in varying concentrations (10, 15 and 20 %) were co-electrospun with PLA fibers and subsequently leached out using distilled water. PLA fibrous membranes without glucose crystals were also produced as controls. The membranes were examined for their morphology, mechanical properties, and potential to support the proliferation of fibroblasts. In addition, the immune response to the membranes was evaluated using monocyte-derived macrophages. The glucose crystals were uniformly distributed in the PLA membranes and their removal created open pores without collapsing the structure. Although a reduced Young's modulus was observed for membranes produced using higher glucose crystal concentrations and larger crystal sizes, the structural integrity remained intact, and the values are still suitable for tissue engineering. In vitro results showed that the scaffolds supported the adhesion and proliferation of fibroblasts and the pores created in the PLAmembranes were large enough for fibroblasts infiltration and colonization of the entire scaffold without inducing an inflammatory response.

Biochemical Approach to Poly(Lactide)-Copper Composite-Impact on Blood Coagulation Processes

The paper presents the investigation of the biological properties of Poly(Lactide)-Copper composite material obtained by sputter deposition of copper onto Poly(lactide) melt-blown nonwoven fabrics. The functionalized composite material was subjected to microbial activity tests against colonies of Gram-positive (Staphylococcus aureus), Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria, Chaetomium globosum and Candida albicans fungal mold species and biochemical-hematological tests including the evaluation of the Activated Partial Thromboplastin Time, Prothrombin Time, Thrombin Time and electron microscopy fibrin network imaging. The substantial antimicrobial and antifungal activities of the Poly(Lactide)-Copper composite suggests potential applications as an antibacterial/antifungal material. The unmodified Poly(Lactide) fabric showed accelerated human blood plasma clotting in the intrinsic pathway, while copper plating abolished this effect. Unmodified PLA itself could be used for the preparation of wound dressing materials, accelerating coagulation in the case of hemorrhages, and its modifications with the use of various metals might be applied as new customized materials where blood coagulation process could be well controlled, yielding additional anti-pathogen effects.

Recent Development and Applications of Polydopamine in Tissue Repair and Regeneration Biomaterials

The various tissue damages are a severe problem to human health. The limited human tissue regenerate ability requires suitable biomaterials to help damage tissue repair and regeneration. Therefore, many researchers devoted themselves to exploring biomaterials suitable for tissue repair and regeneration. Polydopamine (PDA) as a natural and multifunctional material which is inspired by mussel has been widely applied in different biomaterials. The excellent properties of PDA, such as strong adhesion, photothermal and high drug-loaded capacity, seem to be born for tissue repair and regeneration. Furthermore, PDA combined with different materials can exert unexpected effects. Thus, to inspire researchers, this review summarizes the recent and representative development of PDA biomaterials in tissue repair and regeneration. This article focuses on why apply PDA in these biomaterials and what PDA can do in different tissue injuries.

Promising Role of Polylactic Acid as an Ingenious Biomaterial in Scaffolds, Drug Delivery, Tissue Engineering, and Medical Implants: Research Developments, and Prospective Applications

In the present scenario, the research is now being focused on the naturally occurring polymers that can gradually replace the existing synthetic polymers for the development of bio composites having applications in medical surgeries and human implants. With promising mechanical properties and bio compatibility with human tissues, poly lactic acid (PLA) is now being viewed as a future bio material. In order to examine the applicability of PLA in human implants, the current article sheds light on the synthesis of PLA and its various copolymers used to alter its physical and mechanical properties. In the latter half, various processes used for the fabrication of biomaterials are discussed in detail. Finally, biomaterials that are currently in use in the field of biomedical (Scaffolding, drug delivery, tissue engineering, medical implants, derma, cosmetics, medical surgeries, and human implants) are represented with respective advantages in the sphere of biomaterials.

Electrical stimulation therapy and rotary jet-spinning scaffold to treat bone defects

The combination of electrical stimulation (ES) and bone tissue engineering (BTE) has been successful in treatments of bone regeneration. This study evaluated the effects of ES combined with PCL + β-TCP 5% scaffolds obtained by rotary jet spinning (RJS) in the regeneration of bone defects in the calvaria of Wistar rats. We used 120 animals with induced bone defects divided into 4 groups (n = 30): (C) without treatment; (S) with PCL+ β-TCP 5% scaffold; (ES) treated with ES (10 μA/5 min); (ES + S) with PCL + β-TCP 5% scaffold. The ES occurred twice a week during the entire experimental period. Cell viability (in vitro: Days 3 and 7) and histomorphometric, histochemical, and immunohistochemical (in vivo; Days 30, 60, and 90) analysis were performed. In vitro, ES + S increased cell viability after Day 7 of incubation. In vivo, it was observed modulation of inflammatory cells in ES therapy, which also promoted blood vessels proliferation, and increase of collagen. Moreover, ES therapy played a role in osteogenesis by decreasing ligand kappa B nuclear factor-TNFSF11 (RANKL), increasing alkaline phosphatase (ALP), and decreasing the tartarate-resistant acid phosphatase. The combination of ES with RJS scaffolds may be a promising strategy for bone defects regeneration, since the therapy controlled inflammation, favored blood vessels proliferation, and osteogenesis, which are important processes in bone remodeling.

Electrospinning vs. Electro-Assisted Solution Blow Spinning for Fabrication of Fibrous Scaffolds for Tissue Engineering

Biodegradable polymeric fibrous non-woven materials are widely used type of scaffolds for tissue engineering. Their morphology and properties could be controlled by composition and fabrication technology. This work is aimed at development of fibrous scaffolds from a multicomponent polymeric system containing biodegradable synthetic (polylactide, polycaprolactone) and natural (gelatin, chitosan) components using different methods of non-woven mats fabrication: electrospinning and electro-assisted solution blow spinning. The effect of the fabrication technique of the fibrous materials onto their morphology and properties, including the ability to support adhesion and growth of cells, was evaluated. The mats fabricated using electrospinning technology consist of randomly oriented monofilament fibers, while application of solution blow spinning gave a rise to chaotically arranged multifilament fibers. Cytocompatibility of all fabricated fibrous mats was confirmed using in vitro analysis of metabolic activity, proliferative capacity and morphology of NIH 3T3 cell line. Live/Dead assay revealed the formation of the highest number of cell-cell contacts in the case of multifilament sample formed by electro-assisted solution blow spinning technology.

A Nanofiber Mat With Dual Bioactive Components and a Biomimetic Matrix Structure for Improving Osteogenesis Effect

The challenge of effectively regenerating bone tissue through tissue engineering technology is that most tissue engineering scaffolds cannot imitate the three-dimensional structure and function of the natural extracellular matrix. Herein, we have prepared the poly(L-lactic acid)–based dual bioactive component reinforced nanofiber mats which were named as poly(L-lactic acid)/bovine serum albumin/nanohydroxyapatite (PLLA/BSA/nHAp) with dual bioactive components by combining homogeneous blending and electrospinning technology. The results showed that these nanofiber mats had sufficient mechanical properties and a porous structure suitable for cell growth and migration. Furthermore, the results of cell experiments in vitro showed that PLLA/BSA/nHAp composite nanofiber mat could preferably stimulate the proliferation of mouse osteoblastic cells (MC3T3 cells) compared with pure PLLA nanofiber mats. Based on these results, the scaffolds developed in this study are considered to have a great potential to be adhibited as bone repair materials.

Chitosan-based blends for biomedical applications

Polysaccharides are the most abundant naturally available carbohydrate polymers; composed of monosaccharide units covalently connected together. Chitosan is the most widely used polysaccharides because of its exceptional biocompatibility, mucoadhesion, and chemical versatility. However, it suffers from a few drawbacks, e.g. poor mechanical properties and antibacterial activity for biomedical applications. Blending chitosan with natural or synthetic polymers may not merely improve its physicochemical and mechanical properties, but may also improve its bioactivity-induced properties. This review paper summarizes progress in chitosan blends with biodegradable polymers and polysaccharides and their biomedical applications. Blends of chitosan with alginate, starch, cellulose, pectin and dextran and their applications were particularly addressed. The critical and challenging aspects as well as the future ahead of the use of chitosan-based blends were eventually enlightened.

Hydrogel-Assisted Electrospinning for Fabrication of a 3D Complex Tailored Nanofiber Macrostructure

Electrospinning has shown great potential in tissue engineering and regenerative medicine due to a high surface-area-to-volume ratio and an extracellular matrix-mimicking structure of electrospun nanofibers, but the fabrication of a complex three-dimensional (3D) macroscopic configuration with electrospun nanofibers remains challenging. In the present study, we developed a novel hydrogel-assisted electrospinning process (GelES) to fabricate a 3D nanofiber macrostructure with a 3D complex but tailored configuration by utilizing a 3D hydrogel structure as a grounded collector instead of a metal collector in conventional electrospinning. The 3D hydrogel collector was discovered to effectively concentrate the electric field toward itself similar to the metal collector, thereby depositing electrospun nanofibers directly on its exterior surface. Synergistic advantages of the hydrogel (e.g., biocompatibility and thermally reversible sol-gel transition) and the 3D nanofiber macrostructure (e.g., mechanical robustness and high permeability) provided by the GelES process were demonstrated in a highly permeable tubular tissue graft and a robust drug- or cell-encapsulation construct. GelES is expected to broaden potential applications of electrospinning to not only provide in vivo drug/cell delivery and tissue regeneration but also an in vitro drug testing platform by increasing the degree of freedom in the configuration of the 3D nanofiber macrostructure.

In Situ Biological Transmutation of Catalytic Lactic Acid Waste into Calcium Lactate in a Readily Processable Three-Dimensional Fibrillar Structure for Bone Tissue Engineering

A bioinspired three-dimensional (3D) fibrous structure possesses biomimicry, valuable functionality, and performance to scaffolding in tissue engineering. In particular, an electrospun fibrous mesh has been studied as a scaffold material in various tissue regeneration applications. We produced a low-density 3D polycaprolactone/lactic acid (LA) fibrous mesh (3D-PCLS) via the novel lactic-assisted 3D electrospinning technique exploiting the catalytic properties of LA as we reported previously. In the study, we demonstrated a strategy of recycling the LA component to synthesize the osteoinductive biomolecules in situ, calcium lactate (CaL), thereby forming a 3D bioactive PCL/CaL fibrous scaffold (3D-SCaL) for bone tissue engineering. The fiber morphology of 3D-PCLS and its packing degree could have been tailored by modifying the spinning solution and the collector design. 3D-SCaL demonstrated successful conversion of CaL from LA and exhibited the significantly enhanced biomineralization capacity, cell infiltration and proliferation rate, and osteoblastic differentiation in vitro with two different cell lines, MC3T3-e1 and bone marrow stem cells. In conclusion, 3D-SCaL proves to be a highly practical and accessible strategy using a variety of polymers to produce 3D fibers as a potential candidate for future regenerative medicine and tissue engineering applications.

The Influence of Mucin-Based Artificial Saliva on Properties of Polycaprolactone and Polylactide

Polycaprolactone (PCL) and polylactide (PLA) are the two most common biodegradable polymers with potential use in oral applications. Both polymers undergo mainly slow hydrolytic degradation in the human body. However, specific conditions of the oral cavity, like elevated temperature, low pH, and presence of saliva affect the rate of hydrolysis. The study examined the properties of solid samples of PCL and PLA subjected to degradation in phosphate buffered saline (PBS) and artificial saliva (AS) at temperatures of 37 or 42 °C, and pH values 2 or 7.4. A number of tests were performed, including measurement of the degree of swelling, weight loss, molecular weight, differential scanning calorimetry, and thermogravimetry of polymers, as well as hardness and tensile strength. Additionally, topography and stiffness of surfaces using atomic force microscopy are presented. It has been noticed that in the artificial saliva, the processes of polymer degradation occur slightly more slowly, and the effects of temperature and pH are less pronounced. We believe that a layer of porcine gastric mucin from artificial saliva that adsorbed on the surface of polymers may have a key role in the observed differences; this layer resembles protective mucin coating tissues in the oral cavity.

Polylactic acid: synthesis and biomedical applications

Social and economic development has driven considerable scientific and engineering efforts on the discovery, development and utilization of polymers. Polylactic acid (PLA) is one of the most promising biopolymers as it can be produced from nontoxic renewable feedstock. PLA has emerged as an important polymeric material for biomedical applications on account of its properties such as biocompatibility, biodegradability, mechanical strength and process ability. Lactic acid (LA) can be obtained by fermentation of sugars derived from renewable resources such as corn and sugarcane. PLA is thus an eco-friendly nontoxic polymer with features that permit use in the human body. Although PLA has a wide spectrum of applications, there are certain limitations such as slow degradation rate, hydrophobicity and low impact toughness associated with its use. Blending PLA with other polymers offers convenient options to improve associated properties or to generate novel PLA polymers/blends for target applications. A variety of PLA blends have been explored for various biomedical applications such as drug delivery, implants, sutures and tissue engineering. PLA and their copolymers are becoming widely used in tissue engineering for function restoration of impaired tissues due to their excellent biocompatibility and mechanical properties. The relationship between PLA material properties, manufacturing processes and development of products with desirable characteristics is described in this article. LA production, PLA synthesis and their applications in the biomedical field are also discussed.

Additive manufacturing of bone scaffolds

Additive manufacturing (AM) can obtain not only customized external shape but also porous internal structure for scaffolds, both of which are of great importance for repairing large segmental bone defects. The scaffold fabrication process generally involves scaffold design, AM, and post-treatments. Thus, this article firstly reviews the state-of-the-art of scaffold design, including computer-aided design, reverse modeling, topology optimization, and mathematical modeling. In addition, the current characteristics of several typical AM techniques, including selective laser sintering, fused deposition modeling (FDM), and electron beam melting (EBM), especially their advantages and limitations are presented. In particular, selective laser sintering is able to obtain scaffolds with nanoscale grains, due to its high heating rate and a short holding time. However, this character usually results in insufficient densification. FDM can fabricate scaffolds with a relative high accuracy of pore structure but with a relative low mechanical strength. EBM with a high beam-material coupling efficiency can process high melting point metals, but it exhibits a low-resolution and poor surface quality. Furthermore, the common post-treatments, with main focus on heat and surface treatments, which are applied to improve the comprehensive performance are also discussed. Finally, this review also discusses the future directions for AM scaffolds for bone tissue engineering.

Electrospun 3D Scaffolds for Tissue Regeneration

Tissue engineering aims to fabricate and functionalise constructs that mimic the native extracellular matrix (ECM) in the closest way possible to induce cell growth and differentiation in both in vitro and in vivo conditions. Development of scaffolds that can function as tissue substitutes or augment healing of tissues is an essential aspect of tissue regeneration. Although there are many techniques for achieving this biomimicry in 2D structures and 2D cell cultures, translation of successful tissue regeneration in true 3D microenvironments is still in its infancy. Electrospinning, a well known electrohydrodynamic process, is best suited for producing and functionalising, nanofibrous structures to mimic the ECM. A systematic control of the processing parameters coupled with novel process innovations, has recently resulted in novel 3D electrospun structures. This chapter gives a brief account of the various 3D electrospun structures that are being tried as tissue engineering scaffolds. Combining electrospinning with other 3D structure forming technologies, which have shown promising results, has also been discussed. Electrospinning has the potential to bridge the gap between what is known and what is yet to be known in fabricating 3D scaffolds for tissue regeneration.

Roll-designed 3D nanofibrous scaffold suitable for the regeneration of load bearing bone defects

In this work, an innovative and easy method for the fabrication of 3D scaffold from 2D electrospun structures is introduced. For this aim, coral microparticles were fixed inside the nanofibrous PCL/Gelatin mat and the obtained structure was post assembled into a cylindrical design. Scaffold fabrication procedure is described in detail and morphological properties, physical and mechanical characteristics and in vitro assessments of the prepared scaffold are reported. Presences of coral microparticles in the structure led to the formation of empty spaces (3D pores) between nanofibrous layers which in turn prevent the compact accumulation of nanofibers. Post-assembly of the obtained nanofibrous coral-loaded structures makes it possible to prepare a scaffold with any desired dimension (diameter and height). Existence of coral particles within the nanofibrous mats resulted in distant placement of layers toward each other in the assembling step, which in turn create vacancy in the structure for cellular migration and fluid and nutrients exchange of the scaffold with the surrounding environment. Cell morphology within the scaffolds is investigated and cytotoxicity and cytocompatibility of the structure is evaluated using Alamar blue assay. Enhancement in mineralization of the seeded cells within the prepared coral-loaded scaffolds is demonstrated by the use of SEM-EDX. Performed compression mechanical test revealed excellent modulus and stiffness values for the cylindrical samples which are comparable to those of natural bone tissue.

A bird's eye view on the use of electrospun nanofibrous scaffolds for bone tissue engineering: Current state-of-the-art, emerging directions and future trends

Tissue engineering aims to develop therapeutic products that utilize a combination of scaffolds with viable cell systems or responsive biomolecules derived from such cells, for the repair, restoration/regeneration of tissues. Here, the main goal is to enable the body to heal itself by the introduction of electrospun scaffolds, such that the body recognizes them as its own and in turn uses them to regenerate "neo-native" functional tissues. During the last decade, innovative nanofibrous scaffolds have attracted substantial interest in bone tissue engineering. The electrospinning process makes it possible to fabricate appropriate scaffolds for bone tissue engineering from different categories of nanobiomaterials having the ability of controlled delivery of drugs in the defective tissues. It is expected that with the progress in science and technology, better bone constructs will be proposed in the future. This review discusses the innovative approaches into electrospinning techniques for the fabrication of nanofibrous scaffolds for bone tissue engineering.

Novel 3D scaffold with enhanced physical and cell response properties for bone tissue regeneration, fabricated by patterned electrospinning/electrospraying

Developing three dimensional scaffolds mimicking the nanoscale structure of native extracellular matrix is a key parameter in tissue regeneration. In this study, we aimed to introduce a novel 3D structures composed of nanofibers (NF) and micro particles (MP) and compare their efficiency with 2D nanofibrous scaffold. The conventional nanofibrous PCL scaffolds are 2D mats fabricated by the electrospinning technique, whereas the NF/MP and patterned NF/MP PCL scaffolds are three dimensional structures fabricated by a modified electrospinning/electrospraying technique. The mentioned method was carried out by varying the electrospinning solution parameters and use of a metal mesh as the collector. Detailed fabrication process and morphological properties of the fabricated structures is discussed and porosity, pore size and PBS solution absorption value of the prepared structures are reported. Compared with the 2D structure, 3D scaffolds possessed enhanced porosity and pore size which led to the significant increase in their water uptake capacity. In vitro cell experiments were carried out on the prepared structures by the use of MG-63 osteosarcoma cell line. The fabricated 3D structures offered significantly increased cell attachment, spread and diffusion which were confirmed by SEM analysis. In vitro cytocompatibility assessed by MTT colorimetric assay indicated a continuous cell proliferation over 21 days on the innovative 3D structure, while on 2D mat cell proliferation stopped at early time points. Enhanced osteogenic differentiation of the seeded MG-63 cells on 3D scaffold was confirmed by the remarkable ALP activity together with increased and accelerated calcium deposition on this structure compared to 2D mat. Massive and well distributed bone minerals formed on patterned 3D structure were shown by EDX analysis. In comparison between NF/MP quasi-3D and Patterned NF/MP 3D scaffolds, patterned structures proceeded in all of the above properties. As such, the innovative Patterned NF/MP 3D scaffold could be considered as a proper bone graft substitute for bone tissue regeneration.

Recent Applications of Coaxial and Emulsion Electrospinning Methods in the Field of Tissue Engineering

Electrospinning has emerged as an effective method of producing nanoscale fibers for use in multiple fields of study. One area of significant interest is nanofiber utilization for tissue engineering because the nanofibrous mats can mimic the native extracellular matrix of biological tissues. A logical next step is the inclusion of certain molecules and compounds to accelerate or increase the efficacy of tissue regeneration. Two methods are under scrutiny for their capability to encapsulate therapeutic compounds within electrospun nanofibers: emulsion and coaxial electrospinning. Both have advantages and disadvantages, which need to be taken into careful consideration when deciding to use them in a specific application. Several examples are provided here to highlight the vast potential of multilayered nanofibers as well as the emergence of new techniques to produce three-dimensional scaffolds of nanofibers for use in the field of tissue engineering.

Cell Adhesion on Polycaprolactone Modified by Plasma Treatment

We have investigated the influence of various plasma treatments of electrospun polycaprolactone (PCL) scaffolds on the adhesion and proliferation of human umbilical endothelial cells (HUVEC). The PCL scaffolds were treated in plasmas created in O2, NH3or SO2gas at identical conditions. Surface functionalization of plasma-treated samples was determined using X-ray photoelectron spectroscopy. Cell adhesion and morphology were investigated by scanning electron microscopy and the influence of plasma treatment on cell adhesion and viability was evaluated with cell viability assay (MTT assay). The results showed the highest metabolic activity of HUVEC on PCL samples treated with O2and NH3plasma. Accordingly, the cells reflected the best adhesion and morphology on O2and NH3plasma-treated PCL samples already at 3 h. Moreover, treatment with O2and NH3plasma even stimulated endothelial cell proliferation on PCL surfaces by 60% as measured at 24 h, showing significant improvement in endothelialization of this material. Contrarily, SO2plasma appeared to be less promising in comparison with O2and NH3plasma; however, it was still better than without any plasma treatment. Thus, our results importantly contribute to the biocompatibility improvement of the PCL polymer, commonly used for scaffolds in tissue engineering.

Preclinical in vivo Performance of Novel Biodegradable, Electrospun Poly(lactic acid) and Poly(lactic-co-glycolic acid) Nanocomposites: A Review

Bone substitute materials have witnessed tremendous development over the past decades and autogenous bone may still be considered the gold standard for many clinicians and clinical approaches in order to rebuild and restore bone defects. However, a plethora of novel xenogenic and synthetic bone substitute materials have been introduced in recent years in the field of bone regeneration. As the development of bone is actually a calcification process within a collagen fiber arrangement, the use of scaffolds in the formation of fibers may offer some advantages, along with additional handling characteristics. This review focuses on material characteristics and degradation behavior of electrospun biodegradable polyester scaffolds. Furthermore, we concentrated on the preclinical in vivo performance with regard to bone regeneration in preclinical studies. The major findings are as follows: Scaffold composition and architecture determine its biological behavior and degradation characteristics; The incorporation of inorganic substances and/or organic substances within composite scaffolds enhances new bone formation; L-poly(lactic acid) and poly(lactic-co-glycolic acid) composite scaffolds, especially when combined with basic substances like hydroxyapatite, tricalcium phosphate or demineralized bone powder, seem not to induce inflammatory tissue reactions in vivo.

Electrospun anisotropic architectures and porous structures for tissue engineering

Recent advances in electrospun anisotropic architectures and porous structures, as well as their applications in tissue engineering, are presented.

Enhanced growth of endothelial precursor cells on PCG-matrix facilitates accelerated, fibrosis-free, wound healing: a diabetic mouse model

Diabetes mellitus (DM)-induced endothelial progenitor cell (EPC) dysfunction causes impaired wound healing, which can be rescued by delivery of large numbers of 'normal' EPCs onto such wounds. The principal challenges herein are (a) the high number of EPCs required and (b) their sustained delivery onto the wounds. Most of the currently available scaffolds either serve as passive devices for cellular delivery or allow adherence and proliferation, but not both. This clearly indicates that matrices possessing both attributes are 'the need of the day' for efficient healing of diabetic wounds. Therefore, we developed a system that not only allows selective enrichment and expansion of EPCs, but also efficiently delivers them onto the wounds. Murine bone marrow-derived mononuclear cells (MNCs) were seeded onto a PolyCaprolactone-Gelatin (PCG) nano-fiber matrix that offers a combined advantage of strength, biocompatibility wettability; and cultured them in EGM2 to allow EPC growth. The efficacy of the PCG matrix in supporting the EPC growth and delivery was assessed by various in vitro parameters. Its efficacy in diabetic wound healing was assessed by a topical application of the PCG-EPCs onto diabetic wounds. The PCG matrix promoted a high-level attachment of EPCs and enhanced their growth, colony formation, and proliferation without compromising their viability as compared to Poly L-lactic acid (PLLA) and Vitronectin (VN), the matrix and non-matrix controls respectively. The PCG-matrix also allowed a sustained chemotactic migration of EPCs in vitro. The matrix-effected sustained delivery of EPCs onto the diabetic wounds resulted in an enhanced fibrosis-free wound healing as compared to the controls. Our data, thus, highlight the novel therapeutic potential of PCG-EPCs as a combined 'growth and delivery system' to achieve an accelerated fibrosis-free healing of dermal lesions, including diabetic wounds.

In vivo bone generation via the endochondral pathway on three-dimensional electrospun fibers

A new concept of generating bone tissue via the endochondral route might be superior to the standard intramembranous ossification approach. To implement the endochondral approach, suitable scaffolds are required to provide a three-dimensional (3-D) substrate for cell population and differentiation, and eventually for the generation of osteochondral tissue. Therefore, a novel wet-electrospinning system, using ethanol as the collecting medium, was exploited in this study to fabricate a cotton-like poly(lactic-co-glycolic acid)/poly(ε-caprolactone) scaffold that consisted of a very loose and uncompressed accumulation of fibers. Rat bone marrow cells were seeded on these scaffolds and chondrogenically differentiated in vitro for 4 weeks followed by subcutaneous implantation in vivo for 8 weeks. Cell pellets were used as a control. A glycosaminoglycan assay and Safranin O staining showed that the cells infiltrated throughout the scaffolds and deposited an abundant cartilage matrix after in vitro chondrogenic priming. Histological analysis of the in vivo samples revealed extensive new bone formation through the remodeling of the cartilage template. In conclusion, using the wet-electrospinning method, we are able to create a 3-D scaffold in which bone tissue can be formed via the endochondral pathway. This system can be easily processed for various assays and histological analysis. Consequently, it is more efficient than the traditional cell pellets as a tool to study endochondral bone formation for tissue engineering purposes.

A simple method for fabricating 3-D multilayered composite scaffolds

One limitation of electrospinning stems from the charge build-up that occurs during processing, preventing further fibre deposition and limiting the scaffold overall thickness and hence their end-use in tissue engineering applications targeting large tissue defect repair. To overcome this, we have developed a technique in which thermally induced phase separation (TIPS) and electrospinning are combined. Thick three-dimensional, multilayered composite scaffolds were produced by simply stacking individual polycaprolactone (PCL) microfibrous electrospun discs into a cylindrical holder that was filled with a 3% poly(lactic-co-glycolic acid) (PLGA) solution in dimethylsulfoxide (a good solvent for PLGA but a poor one for PCL). The construct was quenched in liquid nitrogen and the solvent removed by leaching out in cold water. This technique enables the fabrication of scaffolds composed principally of electrospun membranes that have no limit to their thickness. The mechanical properties of these scaffolds were assessed under both quasi-static and dynamic conditions. The multilayered composite scaffolds had similar compressive properties to 5% PCL scaffolds fabricated solely by the TIPS methodology. However, tensile tests demonstrated that the multilayered construct outperformed a scaffold made purely by TIPS, highlighting the contribution of the electrospun component of the composite scaffold to enhancing the overall mechanical property slate. Cell studies revealed cell infiltration principally from the scaffold edges under static seeding conditions. This fabrication methodology permits the rapid construction of thick, strong scaffolds from a range of biodegradable polymers often used in tissue engineering, and will be particularly useful when large dimension electrospun scaffolds are required.

Mathematical model of mechanical behavior of micro/nanofibrous materials designed for extracellular matrix substitutes

Electrospun micro/nanofibrous biomaterials are widely used as extracellular matrix substitutes in tissue engineering applications because of their structural and mechanical properties. To explore the influence of microstructure on the mechanical behavior of fibrous material, a mathematical model of the fiber system was developed. The model describes the microstructural properties of a fibrous matrix using a probability density function, and enables study of their mechanical properties. The results from the mathematical model were validated by qualitative comparison with the experimental results of mechanical testing of polystyrene electrospun nanofibrous materials. The analyses show a trend of three-phase load-displacement behavior. Initially, as an increasing number of fibers are recruited for load bearing, the load-displacement curve has a 'J'-shaped toe region, which is followed by a nearly linear load-displacement curve, in which the number of load-bearing fibers remains nearly steady. Finally, there is a phase when the load-displacement curve descends, indicating failure of the material. The increase in flexibility of the fibrous material makes it stronger, but the randomness of fiber orientation makes the fibrous structure more flexible at the cost of lower strength. The measured mechanical properties of a fibrous matrix were also observed to be dependent on sample size. Therefore, the analyses establish a clear link between the structure and strength of fibrous materials for optimized design and fabrication of fibrous biomaterials with targeted use in tissue engineering, regenerative medicine and drug delivery. The model also establishes a need for standardization of experimental protocols for mechanical characterization of fibrous materials for consistency.

Biomedical Applications of Biodegradable Polymers

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.