Evaluation of a two-stage antibacterial hydrogel dressing for healing in an infected diabetic wound

Doping proanthocyanidins into gel/zirconium hybrid hydrogel to reshape the microenvironment of diabetic wounds for healing acceleration

Infection and chronic inflammation caused by oxidative stress are major challenges in chronic wound healing. Preparing a simple, efficient hydrogel with reactive oxygen-scavenging properties for chronic wound repair is a promising strategy. Herein, we report an injectable, self-repairing hydrogel with antioxidant and antibacterial properties that can be used to regenerate diabetic wounds. Hydrogels are prepared by coordination crosslinking of gelatin (Gel), a natural biopolymer derived from collagen, with Zr4+. Because of the dynamic properties of metal ion coordination bonds and the bactericidal effect of Zr4+, the obtained coordination hydrogels exhibit self-healing, injectable, and antibacterial properties. The plant polyphenol "proanthocyanidins," which has reactive oxygen-scavenging and anti-inflammatory effects, was simultaneously loaded into the coordination hydrogel during cross-linking. We obtained a versatile hydrogel that is easy to prepare, resistant to mechanical irritation, and antioxidant, and antibacterial in vitro. We further demonstrated that the injectable self-healing hydrogels could effectively repair diabetic skin wounds and accelerate collagen deposition and wound healing. This study shows that the multifunctional antioxidant hydrogel has great potential in developing multifunctional biomaterials for chronic wound healing.

Sustained Releasable Copper and Zinc Biogenic Ions Co-Assembled in Metal-Organic Frameworks Reinforced Bacterial Eradication and Wound Mitigation in Diabetic Mice

The employment of metal-organic framework (MOF)-based nanomaterials has been rapidly increasing in bioapplications owing to their biocompatibility, drug degradation, tunable porosity, and intrinsic biodegradability. This evidence suggests that the multifunctional bimetallic ions can behave as remarkable candidates for infection control and wound healing. In this study, bimetallic MOFs (Zn-HKUST-1 and FolA-Zn-HKUST-1) embedded with and without folic acid were synthesized and used for tissue sealing and repairing incisional wound sites in mice models. For comparison, HKUST-1 and FolA-HKUST-1 were also synthesized. The Brunauer-Emmett-Teller (BET) surface area measured for HKUST-1, FolA-HKUST-1, Zn-HKUST-1, and FolA-Zn-HKUST-1 from N2 isotherms was found to be 1868, 1392, 1706, and 1179 m2/g, respectively. The measurements of contact angle values for Zn-HKUST-1, FolA-HKUST-1, and Zn-FolA-HKUST-1 were identified as 4.95 ± 0.8, 43.6 ± 3.4, and 60.62 ± 2.0°, respectively. For topical application in wound healing, they display a wide range of healing characteristics, including antibacterial and enhanced wound healing rates. In addition, in vitro cell migration and tubulogenic potentials were evaluated. The significant reduction in the wound gap and increased expression levels for CD31, eNOS, VEGF-A, and Ki67 were observed from immunohistological analyses to predict the angiogenesis behavior at the incision wound site. The wound healing rate was analyzed in the excisional dermal wounds of diabetic mice model in vivo. On account of antibacterial potentials and tissue-repairing characteristics of Cu2+ and Zn2+ ions, designing an innovative mixed metal ion-based biomaterial has wide applicability and is expected to modulate the growth of various gradient tissues.

A Review of Metal Nanoparticles Embedded in Hydrogel Scaffolds for Wound Healing In Vivo

An evolving field, nanotechnology has made its mark in the fields of nanoscience, nanoparticles, nanomaterials, and nanomedicine. Specifically, metal nanoparticles have garnered attention for their diverse use and applicability to dressings for wound healing due to their antimicrobial properties. Given their convenient integration into wound dressings, there has been increasing focus dedicated to investigating the physical, mechanical, and biological characteristics of these nanoparticles as well as their incorporation into biocomposite materials, such as hydrogel scaffolds for use in lieu of antibiotics as well as to accelerate and ameliorate healing. Though rigorously tested and applied in both medical and non-medical applications, further investigations have not been carried out to bring metal nanoparticle-hydrogel composites into clinical practice. In this review, we provide an up-to-date, comprehensive review of advancements in the field, with emphasis on implications on wound healing in in vivo experiments.

An optimized mouse model of Staphylococcus aureus infected diabetic ulcers

OBJECTIVE

Diabetic foot infection (DFI) represents a major healthcare burden, for which treatment is challenging owing to the pathophysiological alterations intrinsic to diabetes and the alarming increase of antimicrobial resistance. Novel therapies targeting DFI are therefore a pressing research need for which proper models of disease are required.

RESULTS

Here, we present an optimized diabetic mouse model of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds, that resemble key features of DFI, such as pathogen invasion through wound bed and surrounding tissue, necrosis, persistent inflammation and impaired wound healing. Thus, in a time-efficient manner and using simple techniques, this model represents a suitable approach for studying emerging therapies targeting DFI caused by MRSA.

Limited Treatment Options for Diabetic Wounds: Barriers to Clinical Translation Despite Therapeutic Success in Murine Models

Significance: Millions of people worldwide suffer from diabetes mellitus and its complications, including chronic diabetic wounds. To date, there are few widely successful clinical therapies specific to diabetic wounds beyond general wound care, despite the vast number of scientific discoveries in the pathogenesis of defective healing in diabetes. Recent Advances: In recent years, murine animal models of diabetes have enabled the investigation of many possible therapeutics for diabetic wound care. These include specific cell types, growth factors, cytokines, peptides, small molecules, plant extracts, microRNAs, extracellular vesicles, novel wound dressings, mechanical interventions, bioengineered materials, and more. Critical Issues: Despite many research discoveries, few have been translated from their success in murine models to clinical use in humans. This massive gap between bench discovery and bedside application begs the simple and critical question: what is still missing? The complexity and multiplicity of the diabetic wound makes it an immensely challenging therapeutic target, and this lopsided progress highlights the need for new methods to overcome the bench-to-bedside barrier. How can laboratory discoveries in animal models be effectively translated to novel clinical therapies for human patients? Future Directions: As research continues to decipher deficient healing in diabetes, new approaches and considerations are required to ensure that these discoveries can become translational, clinically usable therapies. Clinical progress requires the development of new, more accurate models of the human disease state, multifaceted investigations that address multiple critical components in wound repair, and more innovative research strategies that harness both the existing knowledge and the potential of new advances across disciplines.

Functionalization of Aminoalkylsilane-Grafted Bacterial Nanocellulose with ZnO-NPs-Doped Pullulan Electrospun Nanofibers for Multifunctional Wound Dressing

High moisture permeability, excellent mechanical properties in a wet state, high water-holding capability, and high exudate absorption make bacterial nanocellulose (BNC) a favorable candidate for biomedical device production, especially wound dressings. The lack of antibacterial activity and healing-promoting ability are the main drawbacks that limit its wide application. Pullulan (Pul) is a nontoxic polymer that can promote wound healing. Zinc oxide nanoparticles (ZnO-NPs) are well-known as a safe antibacterial agent. In this study, aminoalkylsilane was chemically grafted on a BNC membrane (A-g-BNC) and used as a bridge to combine BNC with Pul-ZnO-NPs hybrid electrospun nanofibers. FTIR results confirmed the successful production of A-g-BNC/Pul-ZnO. The obtained dressing demonstrated blood clotting performance better than that of BNC. The dressing showed an ability to release ZnO, and its antibacterial activity was up to 5 log values higher than that of BNC. The cytotoxicity of the dressing toward L929 fibroblast cells clearly showed safety due to the proliferation of fibroblast cells. The animal test in a rat model indicated faster healing and re-epithelialization, small blood vessel formation, and collagen synthesis in the wounds covered by A-g-BNC/Pul-ZnO. The new functional dressing, fabricated with a cost-effective and easy method, not only showed excellent antibacterial activity but could also accelerate wound healing.

Nanotechnology-driven advances in the treatment of diabetic wounds

Diabetic foot ulcers (DFUs) are chronic severe complications of diabetes disease and remain a worldwide clinical challenge with social and economic consequences. Diabetic wounds can cause infection, amputation of lower extremities, and even death. Several factors including impaired angiogenesis, vascular insufficiency, and bacterial infections result in a delayed process of wound healing in diabetic patients. Treatment of wound infections using traditional antibiotics has become a critical status. Thus, finding new therapeutic strategies to manage diabetic wounds is urgently needed. Nanotechnology has emerged as an efficient approach for this purpose. This review aimed to summarize recent advances using nanotechnology for the treatment of diabetic wounds.

A Review on Revolutionary Natural Biopolymer-Based Aerogels for Antibacterial Delivery

A biopolymer-based aerogel has been developed to become one of the most potentially utilized materials in different biomedical applications. The biopolymer-based aerogel has unique physical, chemical, and mechanical properties and these properties are used in tissue engineering, biosensing, diagnostic, medical implant and drug delivery applications. Biocompatible and non-toxic biopolymers such as chitosan, cellulose and alginates have been used to deliver antibiotics, plants extract, essential oils and metallic nanoparticles. Antibacterial aerogels have been used in superficial and chronic wound healing as dressing sheets. This review critically analyses the utilization of biopolymer-based aerogels in antibacterial delivery. The analysis shows the relationship between their properties and their applications in the wound healing process. Furthermore, highlights of the potentials, challenges and proposition of the application of biopolymer-based aerogels is explored.

Functional Biomaterials for Treatment of Chronic Wound

The increasing number of patients with chronic wounds caused by diseases, such as diabetes, malignant tumors, infections, and vasculopathy, has caused severe economic and social burdens. The main clinical treatments for chronic wounds include the systemic use of antibiotics, changing dressings frequently, operative debridement, and flap repair. These routine therapeutic strategies are characterized by a long course of treatment, substantial trauma, and high costs, and fail to produce satisfactory results. Biomaterial dressings targeting the different stages of the pathophysiology of chronic wounds have become an active research topic in recent years. In this review, after providing an overview of the epidemiology of chronic wounds, and the pathophysiological characteristics of chronic wounds, we highlight the functional biomaterials that can enhance chronic wound healing through debridement, anti-infection and antioxidant effects, immunoregulation, angiogenesis, and extracellular matrix remodeling. It is hoped that functional biomaterials will resolve the treatment dilemma for chronic wounds and improve patient quality of life.

Hydrogel-Based Strategies to Advance Therapies for Chronic Skin Wounds

Chronic skin wounds are the leading cause of nontraumatic foot amputations worldwide and present a significant risk of morbidity and mortality due to the lack of efficient therapies. The intrinsic characteristics of hydrogels allow them to benefit cutaneous healing essentially by supporting a moist environment. This property has long been explored in wound management to aid in autolytic debridement. However, chronic wounds require additional therapeutic features that can be provided by a combination of hydrogels with biochemical mediators or cells, promoting faster and better healing. We survey hydrogel-based approaches with potential to improve the healing of chronic wounds by reviewing their effects as observed in preclinical models. Topics covered include strategies to ablate infection and resolve inflammation, the delivery of bioactive agents to accelerate healing, and tissue engineering approaches for skin regeneration. The article concludes by considering the relevance of treating chronic skin wounds using hydrogel-based strategies.

Higher Biostability of rh-aFGF-Carbomer 940 Hydrogel and Its Effect on Wound Healing in a Diabetic Rat Model

Hydrogels are excellent drug delivery carriers with excellent ductility. Here, we report the design of a higher biostability of a recombinant human acidic fibroblast growth factor (rh-aFGF) carbomer hydrogel formulation. To verify the optimality of this formula, we prepared various prescriptions and tested the resulting physical properties including micromorphology, long-term stability, accelerated stability, and destructive test. Furthermore, the efficacy for promoting wound healing in full-thickness injury and scald wound diabetic rat models was explored. We found that rh-aFGF-carbomer hydrogel had good physical properties. It was stable for 24 months at 5 ± 3 °C, and for 6 months at 25 ± 3 °C. In vivo, the rh-aFGF-carbomer 940 hydrogel achieved a remarkable promotion of skin wound healing in diabetic rats with full-thickness injuries or scald wounds. Our data suggest that rh-aFGF-carbomer hydrogel may have applications for the treatment of diabetic ulcers combined with other wounds.