Characterization of adhesion and differentiation markers of osteogenic marrow stromal cells

Development of a 3D multifunctional collagen scaffold impregnated with peptide LL-37 for vascularised bone tissue regeneration

Bone is a highly dynamic connective tissue that provides structural support, locomotion and acts as a shield for many vital organs from damage. Bone inherits the ability to heal after non-severe injury. In case of severe bone abnormalities due to trauma, infections, genetic disorders and tumors, there is a demand for a scaffold that can enhance bone formation and regenerate the lost bone tissue. In this study, a 3D collagen scaffold (CS) was functionalized and assessed under in vitro and in vivo conditions. For this, a collagen scaffold coated with hydroxyapatite (Ap-CS) was developed and loaded with a peptide LL-37. The physico-chemical characterisation confirmed the hydroxyapatite coating on the outer and inner surfaces of Ap-CS. In vitro studies confirmed that LL-37 loaded Ap-CS promotes osteogenic differentiation of human osteosarcoma cells without showing significant cytotoxicity. The efficacy of the LL-37 loaded Ap-CS for bone regeneration was evaluated at 4 and 12 weeks post-implantation by histopathological and micro-CT analysis in rabbit femur defect model. The implanted LL-37 loaded Ap-CS facilitated the new bone formation at 4 weeks compared with Ap-CS without LL-37. The LL-37 loaded Ap-CS incorporating apatite and peptide LL-37 would be useful as a multifunctional scaffold for bone tissue engineering.

BMP-2-immobilized PCL 3D printing scaffold with a leaf-stacked structure as a physically and biologically activated bone graft

Although three-dimensional (3D) printing techniques are used to mimic macro- and micro-structures as well as multi-structural human tissues in tissue engineering, efficient target tissue regeneration requires bioactive 3D printing scaffolds. In this study, we developed a bone morphogenetic protein-2 (BMP-2)-immobilized polycaprolactone (PCL) 3D printing scaffold with leaf-stacked structure (LSS) (3D-PLSS-BMP) as a bioactive patient-tailored bone graft. The unique LSS was introduced on the strand surface of the scaffold via heating/cooling in tetraglycol without significant deterioration in physical properties. The BMP-2 adsorbed on3D-PLSS-BMPwas continuously released from LSS over a period of 32 d. The LSS can be a microtopographical cue for improved focal cell adhesion, proliferation, and osteogenic differentiation.In vitrocell culture andin vivoanimal studies demonstrated the biological (bioactive BMP-2) and physical (microrough structure) mechanisms of3D-PLSS-BMPfor accelerated bone regeneration. Thus, bioactive molecule-immobilized 3D printing scaffold with LSS represents a promising physically and biologically activated bone graft as well as an advanced tool for widespread application in clinical and research fields.

3D stem cell spheroids with urchin-like hydroxyapatite microparticles enhance osteogenesis of stem cells

Cell therapy (also known as cell transplantation) has been considered promising as a next-generation living-cell therapy strategy to surpass the effects of traditional drugs. However, their practical clinical uses and product conversion are hampered by the unsatisfied viability and efficacy of the transplanted cells. Herein, we propose a synergistic enhancement strategy to address these issues by constructing 3D stem cell spheroids integrated with urchin-like hydroxyapatite microparticles (uHA). Specifically, cell-sized uHA microparticles were synthesized via a simple hydrothermal method using glutamic acid (Glu, E) as the co-template with good biocompatibility and structural antimicrobial performance (denoted as E-uHA). Combining with a hanging drop method, stem cell spheroids integrated with E-uHA were successfully obtained by culturing bone marrow mesenchymal stem cells (BMSCs) with a low concentration of the E-uHA suspensions (10 μg mL-1). The resulting composite spheroids of BMSCs/E-uHA deliver a high cellular viability, migration activity, and a superior osteogenic property compared to the 2D cultured counterpart or other BMSC spheroids. This work provides an effective strategy for integrating a secondary bio-functional component into stem cell spheroids for designing more cell therapy options with boosted cellular viability and therapeutic effect.

Osteonectin bidirectionally regulates osteoblast mineralization

OBJECTIVE

The aim of this study was to investigate whether Osteonectin/Secreted protein acidic and rich in cysteine (ON/SPARC) had a two-way dose-dependent regulatory effect on osteoblast mineralization and its molecular mechanism.

METHODS

Initially, different concentrations of ON were added in osteoblasts, and the gene of bone sialoprotein (BSP), osteocalcin (OCN), osteopontin (OPN) and alkaline phosphatase (ALP) were detected using reverse-transcription quantitative polymerase chain reaction (RT-PCR). Secondly, based on the above results, the Optima and inhibitory concentration of ON for osteoblast mineralization were determined and regrouped, the Control group was also set up, and the gene detections of Collagen 1 (Col 1), Discoidin domain receptor 2 (DDR2) and p38 mitogen‑activated protein kinase were added using RT-PCR. In the third stage of the experiment, osteoblasts were pretreated with 0.4Mm ethyl-3,4-dihydroxybenzoate (DHB) (a specific inhibitor of collagen synthesis) for 3 h before adding the optima SPARC, the gene and protein expressions of OCN, OPN, BSP, ALP, DDR2, ALP, Col 1, DDR2 and P38 were detected by RT‑qPCR and western blot analysis, and the mineralized nodules were observed by alizarin red staining.

RESULTS

The results showed that the expression of OCN, OPN, BSP, ALP, DDR2, ALP, Col 1, DDR2 and P38 genes and proteins in osteoblasts were significantly enhanced by 1 ug/ml ON, 100 ug/ml ON or 1 ug/ml ON added with 3,4 DHB significantly inhibited the expressions of DDR2, P38 and the above-mentioned mineralization indexes, and significantly reduced the formation of mineralized nodules.

CONCLUSION

This study suggested that ON had a bidirectional dose-dependent regulatory effect on osteoblast mineralization, and the activation of P38 pathway by collagen binding to DDR2 was also an important molecular mechanism.

The Mechanotransduction Signaling Pathways in the Regulation of Osteogenesis

Bones are constantly exposed to mechanical forces from both muscles and Earth's gravity to maintain bone homeostasis by stimulating bone formation. Mechanotransduction transforms external mechanical signals such as force, fluid flow shear, and gravity into intracellular responses to achieve force adaptation. However, the underlying molecular mechanisms on the conversion from mechanical signals into bone formation has not been completely defined yet. In the present review, we provide a comprehensive and systematic description of the mechanotransduction signaling pathways induced by mechanical stimuli during osteogenesis and address the different layers of interconnections between different signaling pathways. Further exploration of mechanotransduction would benefit patients with osteoporosis, including the aging population and postmenopausal women.

Apoptotic Vesicles Regulate Bone Metabolism via the miR1324/SNX14/SMAD1/5 Signaling Axis

Mesenchymal stem cells (MSCs) are widely used in the treatment of diseases. After their in vivo application, MSCs undergo apoptosis and release apoptotic vesicles (apoVs). This study investigates the role of apoVs derived from human bone marrow mesenchymal stem cells (hBMMSCs) in bone metabolism and the molecular mechanism of the observed effects. The results show that apoVs can promote osteogenesis and inhibit osteoclast formation in vitro and in vivo. ApoVs may therefore attenuate the bone loss caused by primary and secondary osteoporosis and stimulate bone regeneration in areas of bone defect. The mechanisms responsible for apoV-induced bone regeneration include the release of miR1324, which inhibit expression of the target gene Sorting Nexin 14 (SNX14) and thus activate the SMAD1/5 pathway in target cells. Given that MSC-derived apoVs are easily obtained and stored, with low risks of immunological rejection and neoplastic transformation, The findings suggest a novel therapeutic strategy to treat bone loss, including via cell-free approaches to bone tissue engineering.

A Novel Zwitterionic Hydrogel Incorporated with Graphene Oxide for Bone Tissue Engineering: Synthesis, Characterization, and Promotion of Osteogenic Differentiation of Bone Mesenchymal Stem Cells

Zwitterionic materials are widely applied in the biomedical field due to their excellent antimicrobial, non-cytotoxicity, and antifouling properties but have never been applied in bone tissue engineering. In this study, we synthesized a novel zwitterionic hydrogel incorporated with graphene oxide (GO) using maleic anhydride (MA) as a cross-linking agent by grafted L-cysteine (L-Cys) as the zwitterionic material on maleilated chitosan via click chemistry. The composition and each reaction procedure of the novel zwitterionic hydrogel were characterized via X-ray diffraction (XRD) and Fourier transformed infrared spectroscopy (FT-IR), while the morphology was imaged by scanning electron microscope (SEM). In vitro cell studies, CCK-8 and live/dead assay, alkaline phosphatase activity, W-B, and qRT-CR tests showed zwitterionic hydrogel incorporated with GO remarkably enhanced the osteogenic differentiation of bone mesenchymal stem cells (BMSCs); it is dose-dependent, and 2 mg/mL GO is the optimum concentration. In vivo tests also indicated the same results. Hence, these results suggested the novel zwitterionic hydrogel exhibited porous characteristics similar to natural bone tissue. In conclusion, the zwitterionic scaffold has highly biocompatible and mechanical properties. When GO was incorporated in this zwitterionic scaffold, the zwitterionic scaffold slows down the release rate and reduces the cytotoxicity of GO. Zwitterions and GO synergistically promote the proliferation and osteogenic differentiation of rBMSCs in vivo and in vitro. The optimal concentration is 2 mg/mL GO.

A bone-on-a-chip collagen hydrogel-based model using pre-differentiated adipose-derived stem cells for personalized bone tissue engineering

Mesenchymal stem cells have contributed to the continuous progress of tissue engineering and regenerative medicine. Adipose-derived stem cells (ADSC) possess many advantages compared to other origins including easy tissue harvesting, self-renewal potential, and fast population doubling time. As multipotent cells, they can differentiate into osteoblastic cell linages. In vitro bone models are needed to carry out an initial safety assessment in the study of novel bone regeneration therapies. We hypothesized that 3D bone-on-a-chip models containing ADSC could closely recreate the physiological bone microenvironment and promote differentiation. They represent an intermedium step between traditional 2D-in vitro and in vivo experiments facilitating the screening of therapeutic molecules while saving resources. Herein, we have differentiated ADSC for 7 and 14 days and used them to fabricate in vitro bone models by embedding the pre-differentiated cells in a 3D collagen matrix placed in a microfluidic chip. Osteogenic markers such as alkaline phosphatase activity, calcium mineralization, changes on cell morphology, and expression of specific proteins (bone sialoprotein 2, dentin matrix acidic phosphoprotein-1, and osteocalcin) were evaluated to determine cell differentiation potential and evolution. This is the first miniaturized 3D-in vitro bone model created from pre-differentiated ADSC embedded in a hydrogel collagen matrix which could be used for personalized bone tissue engineering.

Construction of artificial periosteum with methacrylamide gelatin hydrogel-wharton's jelly based on stem cell recruitment and its application in bone tissue engineering

The presence of periosteum can greatly affect the repair of a bone fracture. An artificial periosteum imitates the biological function of natural periosteum, which is capable of protecting and maintaining bone tissue structure and promoting bone repair. In our artificial periosteum, biocompatible methacrylate gelatin was used to provide the mechanical support of the membrane, E7 peptide added bioactivity, and Wharton's jelly provided the biological activity support of the membrane, resulting in a hydrogel membrane (G-E-W) for the chemotactic recruitment of bone marrow mesenchymal stem cells (BMSCs) and promoting cell proliferation and osteogenic differentiation. In an in vitro experiment, the G-E-W membrane recruited BMSCs and promoted cell proliferation and osteogenic differentiation. After 4 weeks and 8 weeks of implantation in a rat skull defect, the group implanted with a G-E-W membrane was superior to the blank control group and single-component membrane group in both quantity and quality of new bone. The artificial G-E-W membrane recruits BMSC chemotaxis and promotes cell proliferation and osteogenic differentiation, thereby effectively improving the repair efficiency of fractures and bone defects.

A Comparative Study of Mesoporous Silica and Mesoporous Bioactive Glass Nanoparticles as Non-Viral MicroRNA Vectors for Osteogenesis

Micro-ribonucleic acid (miRNA)-based therapies show advantages for bone regeneration but need efficient intracellular delivery methods. Inorganic nanoparticles such as mesoporous bioactive glass nanoparticles (MBGN) and mesoporous silica nanoparticles (MSN) have received growing interest in the intracellular delivery of nucleic acids. This study explores the capacity of MBGN and MSN for delivering miRNA to bone marrow mesenchymal stem cells (BMSC) for bone regenerative purposes, with a focus on comparing the two in terms of cell viability, transfection efficiency, and osteogenic actions. Spherical MBGN and MSN with a particle size of ~200 nm and small-sized mesopores were prepared using the sol-gel method, and then the surface was modified with polyethyleneimine for miRNA loading and delivery. The results showed miRNA can be loaded into both nanoparticles within 2 h and was released sustainedly for up to 3 days. Confocal laser scanning microscopy and flow cytometry analysis indicated a high transfection efficiency (>64%) of both nanoparticles without statistical difference. Compared with MSN, MBGN showed stronger activation of alkaline phosphatase and activation of osteocalcin genes. This translated to a greater osteogenic effect of MBGN on BMSC, with Alizarin red staining showing greater mineralization compared with the MSN group. These findings show the potential for MBGN to be used in bone tissue engineering.

Mimicking Bone Extracellular Matrix: From BMP-2-Derived Sequences to Osteogenic-Multifunctional Coatings

Cell-material interactions are regulated by mimicking bone extracellular matrix on the surface of biomaterials. In this regard, reproducing the extracellular conditions that promote integrin and growth factor (GF) signaling is a major goal to trigger bone regeneration. Thus, the use of synthetic osteogenic domains derived from bone morphogenetic protein 2 (BMP-2) is gaining increasing attention, as this strategy is devoid of the clinical risks associated with this molecule. In this work, the wrist and knuckle epitopes of BMP-2 are screened to identify peptides with potential osteogenic properties. The most active sequences (the DWIVA motif and its cyclic version) are combined with the cell adhesive RGD peptide (linear and cyclic variants), to produce tailor-made biomimetic peptides presenting the bioactive cues in a chemically and geometrically defined manner. Such multifunctional peptides are next used to functionalize titanium surfaces. Biological characterization with mesenchymal stem cells demonstrates the ability of the biointerfaces to synergistically enhance cell adhesion and osteogenic differentiation. Furthermore, in vivo studies in rat calvarial defects prove the capacity of the biomimetic coatings to improve new bone formation and reduce fibrous tissue thickness. These results highlight the potential of mimicking integrin-GF signaling with synthetic peptides, without the need for exogenous GFs.

Osteogenesis in human periodontal ligament stem cell sheets is enhanced by the protease-activated receptor 1 (PAR1) in vivo

Human periodontal ligament stem cells (PDLSCs) have been studied as a promising strategy in regenerative approaches. The protease-activated receptor 1 (PAR₁) plays a key role in osteogenesis and has been shown to induce osteogenesis and increase bone formation in PDLSCs. However, little is known about its effects when activated in PDLSCs as a cell sheet construct and how it would impact bone formation as a graft in vivo. Here, PDLSCs were obtained from 3 patients. Groups were divided into control, osteogenic medium and osteogenic medium + PAR₁ activation by TFLLR-NH2 peptide. Cell phenotype was determined by flow cytometry and immunofluorescence. Calcium deposition was quantified by Alizarin Red Staining. Cell sheet microstructure was analyzed through light, scanning electron microscopy and histology and transplanted to Balb/c nude mice. Immunohistochemistry for bone sialoprotein (BSP), integrin β1 and collagen type 1 and histological stains (H&E, Van Giesson, Masson’s Trichrome and Von Kossa) were performed on the ex-vivo mineralized tissue after 60 days of implantation in vivo. Ectopic bone formation was evaluated through micro-CT. PAR₁ activation increased calcium deposition in vitro as well as BSP, collagen type 1 and integrin β1 protein expression and higher ectopic bone formation (micro-CT) in vivo.

Bone Beads Enveloped with Vascular Endothelial Cells for Bone Regenerative Medicine

The transplantation of pre-vascularized bone grafts is a promising strategy to improve the efficacy of engraftment and bone regeneration. We propose a hydrogel microbead-based approach for preparing vascularized and high-density tissue grafts. Mesenchymal stem cell-encapsulated collagen microgels (2 µL), termed bone beads, were prepared through spontaneous constriction, which improved the density of the mesenchymal stem cells and collagen molecules by more than 15-fold from the initial day of culture. Constriction was attributed to cell-attractive forces and involved better osteogenic differentiation of mesenchymal stem cells than that of spheroids. This approach was scalable, and ∼2,000 bone beads were prepared semi-automatically using a liquid dispenser and spinner flask. The mechanical stimuli in the spinner flask further improved the osteogenic differentiation of the mesenchymal stem cells in the bone beads compared with that in static culture. Vascular endothelial cells readily attach to and cover the surface of bone beads. The in vitro assembly of the endothelial cell-enveloped bone beads resulted in microchannel formation in the interspaces between the bone beads. Significant effects of endothelialization on in vivo bone regeneration were shown in rats with cranial bone defects. The use of endothelialized bone beads may be a scalable and robust approach for treating large bone defects. STATEMENT OF SIGNIFICANCE: A unique aspect of this study is that the hMSC-encapsulated collagen microgels were prepared through spontaneous constriction, leading to the enrichment of collagen and cell density. This constriction resulted in favorable microenvironments for the osteogenic differentiation of hMSCs, which is superior to conventional spheroid culture. The microgel beads were then enveloped with vascular endothelial cells and assembled to fabricate a tissue graft with vasculature in the interspaces among the beads. The significant effects of endothelialization on in vivo bone regeneration were clearly demonstrated in rats with cranial bone defects. We believe that microgel beads covered with vascular endothelial cells provide a promising approach for engineering better tissue grafts for bone-regenerative medicine.

The effect of osteoporotic and non-osteoporotic individuals' T cell-derived exosomes on osteoblast cells' bone remodeling related genes expression and alkaline phosphatase activity

Objectives

Osteoporosis is a common skeletal disorder attributed to age and is defined as a systematic degradation of bone mass and the microarchitecture leading to bone fractures. Exosomes have been reported in almost all biological fluids and during the failure of bone remodeling. 20 ml of blood samples were obtained from osteoporotic and non-osteoporotic postmenopausal women. After the isolation of peripheral blood mononuclear cells (PBMCs), T cells were separated via the magnetic-activated cell sorting (MACS) technique. Exosomes were driven from T cells of non-osteoporotic and osteoporotic volunteers. Subsequently, normal osteoblasts were treated with obtained T cell exosomes to assess osteoblastic function and gene expression.

Results

Runx2, type I collagen, osteopontin, and osteocalcin expression decreased in osteoblasts treated by osteoporotic T cell exosomes. In contrast, an increased expression of the mentioned genes was observed following non-osteoporotic T cell exosome treatment. Additionally, osteoblast alkaline phosphatase (ALP) activity treated with non-osteoporotic T cell exosomes increased. However, this activity decreased in another group. Our data demonstrated that T cell exosomes obtained from osteoporotic and non-osteoporotic individuals could alter the osteoblastic function and gene expression by affecting the genes essential for bone remodeling.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13104-022-06139-4.

Macrophage-derived apoptotic vesicles regulate fate commitment of mesenchymal stem cells via miR155

BACKGROUND

In tissue engineering, mesenchymal stem cells (MSCs) are common seed cells because of abundant sources, strong proliferation ability and immunomodulatory function. Numerous researches have demonstrated that MSC-macrophage crosstalk played a key role in the tissue engineering. Macrophages could regulate the differentiation of MSCs via different molecular mechanisms, including extracellular vesicles. Apoptotic macrophages could generate large amounts of apoptotic vesicles (apoVs). ApoVs are rich in proteins, RNA (microRNAs, mRNAs, ncRNAs, etc.) and lipids, and are a key intercellular communication mediator that can exert different regulatory effects on recipient cells. MiRNAs account for about half of the total RNAs of extracellular vesicles, and play important roles in biological processes such as cell proliferation and differentiation, whereas the functions of macrophage-derived apoVs remain largely unknown. There was no research to clarify the role of macrophage-derived apoVs in MSC fate choices. In this study, we aimed to characterize macrophage-derived apoVs, and investigate the roles of macrophage-derived apoVs in the fate commitment of MSCs.

METHODS

We characterized macrophage-derived apoVs, and investigated their role in MSC osteogenesis and adipogenesis in vitro and in vivo. Furthermore, we performed microRNA loss- and gain-of-function experiments and western blot to determine the molecular mechanism.

RESULTS

Macrophages could produce a large number of apoVs after apoptosis. MSCs could uptake apoVs. Then, we found that macrophage-derived apoVs inhibited osteogenesis and promoted adipogenesis of MSCs in vitro and in vivo. In mechanism, apoVs were enriched for microRNA155 (miR155), and apoVs regulated osteogenesis and adipogenesis of MSCs by delivering miR155. Besides, miR155 regulated osteogenesis and adipogenesis of MSCs cultured with macrophage-derived apoVs via the SMAD2 signaling pathway.

CONCLUSIONS

Macrophage-derived apoVs could regulate the osteogenesis and adipogenesis of MSCs through delivering miR155, which provided novel insights for MSC-mediated tissue engineering.

Disrupted Surfaces of Porous Membranes Reduce Nuclear YAP Localization and Enhance Adipogenesis through Morphological Changes

The disrupted surface of porous membranes, commonly used in tissue-chip and cellular coculture systems, is known to weaken cell-substrate interactions. Here, we investigated whether disrupted surfaces of membranes with micron and submicron scale pores affect yes-associated protein (YAP) localization and differentiation of adipose-derived stem cells. We found that these substrates reduce YAP nuclear localization through decreased cell spreading, consistent with reduced cell-substrate interactions, and in turn enhance adipogenesis while decreasing osteogenesis.

Biomimetic Scaffolds with a Mineral Gradient and Funnel-Shaped Channels for Spatially Controllable Osteogenesis

A facile method is described herein for generating a mineral gradient in a biodegradable polymer scaffold. The gradient is achieved by swelling a composite film made of polycaprolactone (PCL) and hydroxyapatite (HAp) nanoparticles with a PCL solution. During the swelling process, the solvent and PCL polymer chains diffuse into the composite film, generating a gradient in HAp density at their interface. The thickness of the mineral gradient can be tuned by varying the extent of swelling to match the length scale of the natural tendon-to-bone attachment (20-60 µm). When patterned with an array of funnel-shaped channels, the mineral gradient presents stem cells with spatial gradations in both biochemical cues (e.g., osteoinductivity and conductivity associated with the HAp nanoparticles) and mechanical cues (e.g., substrate stiffness) to stimulate their differentiation into a graded distribution of cell phenotypes. This new class of biomimetic scaffolds holds great promise for facilitating the regeneration of the injured tendon-to-bone attachment by stimulating the formation of a functionally graded interface.

Association of High Serum Chemerin with Bone Mineral Density Loss and Osteoporotic Fracture in Elderly Chinese Women

Background

Chemerin has been suggested to be a risk factor for osteoporosis; however, its relationship with osteoporotic fracture is poorly understood. Herein, we intend to explore the association between serum chemerin and osteoporotic fracture.

Methods

A total of 111 elderly women patients diagnosed with osteoporotic fracture were selected as the observation group, and 40 healthy subjects were enrolled as controls. Dual-energy X-ray absorptiometry, enzyme-linked immunosorbent assay, electrochemiluminescence immunoassay, and biochemical analysis were separately performed to determine body bone mineral density (BMD), chemerin levels, bone turnover markers, and other parameters. Pearson's correlation analysis was conducted to examine a relationship between chemerin and laboratory parameters. Moreover, the levels of chemokine-like receptor 1 (CMKLR), C-C motif chemokine receptor-like 2 (CCRL2), collagen type I alpha (COLA1), and runt-related transcription factor-2 (RUNX2) were confirmed by quantitative polymerase chain reaction, and the effect of chemerin on osteogenic differentiation of hFOB1.19 cells was indicated by tartrate-resistant acid phosphatase and alkaline phosphatase double staining.

Results

A higher level of chemerin was generally detected in patients with osteoporotic fracture compared with those without (P<0.05). Compared with controls, lower BMD levels and higher β-CTx and P1NP levels were detected in patients with osteoporotic fracture (all P<0.05). Interestingly, chemerin level was negatively correlated to BMD, but positively related to P1NP and β-CTx. Risk of osteoporotic fracture was 2.75-fold higher in subjects with each standard deviation increment of chemerin. Compared with controls, there were no significant differences in CMKLR1 and CCRL2 mRNA after incubation with osteogenic differentiation medium (all P>0.05), whereas there was a remarkable decrease of COLA1 and RUNX2 after incubation with chemerin for nine days (all P<0.05). Furthermore, prolonged incubation with chemerin enhanced osteoclast differentiation and maturation, consequently contributing to an increased risk of fracture.

Conclusion

Chemerin is a strong and independent risk factor for osteoporosis-related fracture among elderly Chinese women.

Biomimetic Composite Coatings for Activation of Titanium Implant Surfaces: Methodological Approach and In Vivo Enhanced Osseointegration

Innovative nanomaterials are required for the coatings of titanium (Ti) implants to ensure the activation of Ti surfaces for improved osseointegration, enhanced bone fracture healing and bone regeneration. This paper presents a systematic investigation of biomimetic composite (BC) coatings on Ti implant surfaces in a rat model of a diaphyseal femoral fracture. Methodological approaches of surface modification of the Ti implants via the usual joining methods (e.g., grit blasting and acid etching) and advanced physicochemical coating via a self-assembled dip-coating method were used. The biomimetic procedure used multi-substituted hydroxyapatite (ms-HAP) HAP-1.5 wt% Mg-0.2 wt% Zn-0.2 wt% Si nanoparticles (NPs), which were functionalized using collagen type 1 molecules (COL), resulting in ms-HAP/COL (core/shell) NPs that were embedded into a polylactic acid (PLA) matrix and finally covered with COL layers, obtaining the ms-HAP/COL@PLA/COL composite. To assess the osseointegration issue, first, the thickness, surface morphology and roughness of the BC coating on the Ti implants were determined using AFM and SEM. The BC-coated Ti implants and uncoated Ti implants were then used in Wistar albino rats with a diaphyseal femoral fracture, both in the absence and the presence of high-frequency pulsed electromagnetic shortwave (HF-PESW) stimulation. This study was performed using a bone marker serum concentration and histological and computer tomography (micro-CT) analysis at 2 and 8 weeks after surgical implantation. The implant osseointegration was evaluated through the bone–implant contact (BIC). The bone–implant interface was investigated using FE-SEM images and EDX spectra of the retrieved surgical implants at 8 weeks in the four animal groups. The obtained results showed significantly higher bone–implants contact and bone volume per tissue volume, as well as a greater amount of newly formed bone, in the BC-coated Ti implants than in the uncoated Ti implants. Direct bone–implant contact was also confirmed via histological examination. The results of this study confirmed that these biomimetic composite coatings on Ti implants were essential for a significant enhancement of osseointegration of BC-coated Ti implants and bone regeneration. This research provides a novel strategy for the treatment of bone fractures with possible orthopedic applications.

JK-2 loaded electrospun membrane for promoting bone regeneration

Hydrogen sulfide (H₂S) has been as an essential gasotransmitter and a potential therapeutic approach for several biomedical treatments such as cardiovascular disorders, hypertension, and other diseases. The endogenous and exogenous H₂S also plays a crucial role in the bone anabolic process and a protective mechanism in cell signalling. In this study, we have utilized two types of polymers, polycaprolactone (PCL) and gelatin (Gel), for the fabrication of JK-2 (H₂S donor) loaded nanofibrous scaffold via electrospinning process for bone healing and bone tissue engineering. Comparing the PCL/Gel and PCL/Gel-JK-2 scaffolds, the latter demonstrated enhanced cell adhesion and proliferation capabilities. Furthermore, both experimental scaffolds have been subjected to an in vivo experiment for 4 and 8 weeks in a bone-defect model of a rabbit to determine their biological responses under physiological conditions. There was an obvious increase in bone regeneration in the PCL/Gel-JK-2 group compared to the control and PCL/Gel groups. These results indicate the use of PCL/Gel scaffolds loaded with JK-2 should be considered for possible bone regeneration.

Effect of Bone-Marrow-Derived Mesenchymal Stem Cells on the Healing of Bone Fractures

This study was performed to evaluate the effectiveness of mesenchymal stem cells (MSCs) on bone healing and to assess the role of various chemical stimulants and mediators in healing. Forty female mice were randomly assigned to 4 groups (10 mice each) after the induction of fixed fractures: group I: received fixation only; group II: received phosphate-buffered saline (PBS); group III: received intralesion MSCs (IL-MSCs); and group IV: received intraperitoneal MSCs (IP-MSCs). Serum alkaline phosphatase (ALP) levels and the expression of the osteocalcin (OCN), bone morphogenetic protein-2 (BMP-2), and stromal-derived factor-1 (SDF-1) genes were measured. ALP reached baseline level only in IL-MSCs, whereas OCN reached baseline level in MSCs recipients (IL-MSCs and IP-MSCs). BMP-2 significantly increased in MSCs recipients 3 weeks postfracture and increased in all groups 8 weeks postfracture with significant increases in MSC recipients than the fixation and PBS groups. The highest BMP-2 expression was reached in IL-MSC group. MSCs either locally or systemically improves or accelerates the healing of bone fractures with better results obtained after local injection, as shown by biochemical, radiological, and histological findings. MSCs are effective candidates for bone regeneration.

Efficient transfection and long-term stability of rno-miRNA-26a-5p for osteogenic differentiation by large pore sized mesoporous silica nanoparticles

MicroRNA (miRNA) based therapy for bone repair has shown promising results for regulating stem cell proliferation and differentiation, an efficient and stable vector for delivery of microRNA delivery is needed. The present study explored the stability and functionality of lyophilized mesoporous silica nanoparticles with core-cone structure and coated with polyethylenimine (MSN-CC-PEI) as a system for delivering Rattus norvegicus (rno)-miRNA-26a-5p into rat marrow mesenchymal cells (rBMSCs) to promote their osteogenic differentiation. We assessed the cellular uptake and transfection efficiency of nanoparticles loaded with labelled miRNA using confocal laser scanning microscopy and flow cytometry, and the cell viability using the MTT assay. The expression levels of osteogenic genes after one and two weeks were analysed by quantitative reverse transcription-polymerase chain reaction (qRT-PCR). Extracellular matrix deposition and mineralization at 3 weeks were evaluated using Picro Sirius red and Alizarin red staining. We also assessed the performance of the delivery system after long term storage, by freeze drying rno-miRNA-26a-5p@MSN-CC-PEI with 5% trehalose and keeping them at -30 °C for 3 and 6 months. Osteogenic differentiation, matrix deposition, and mineralization were all significantly increased by rno-miRNA-26a-5p. In addition, this enhancement was not significantly altered by lyophilization and storage. Overall, these findings support the concept of MSN-CC-PEI as a delivery system for gene therapy. The complex of rno-miRNA-26a-5p@MSN-CC-PEI could efficiently transfect rBMSCs and enhance their osteogenic differentiation. In addition, the lyophilized complexes remain functional after 6 months of storage.

Effects of bovine cancellous bone powder/poly amino acid composites on cellular behaviors and osteogenic performances

Xenogeneic bone has good biological activity, but eliminating immunogenicity, while retaining osteogenic abilities, is a challenge. By combining xenogeneic bone with poly amino acid (PAA) that has an amide bond structure, a new type of composite conforming to bionics and low immunogenicity may be obtained. In this study, according to the principles of component bionics, three composites of delipidized cancellous bone powder (DCBP) and PAA were designed and obtained by anin situpolycondensation method, an extrusion molding (EM) method, and a solution-blend method. The three composites were all macroscopically uniform, non-cytotoxic, and demonstrated low immunogenicity by effective removal of residual antigens during preparation. Compared with PAA, mouse bone marrow mesenchymal stem cells (BMSCs) on the surfaces of three composites showed different cellular morphologies. The effects of different preparation methods and cellular morphology on cellular differentiation were confirmed by alkaline phosphatase activity, calcium nodule formation and the expression levels of osteogenic differentiation-related genes (bone morphogenetic protein 2, runt-related transcription factor 2, osteopontin and osteocalcin). Among these composites, DCBP/PAA EM showed best cell proliferation and osteogenic differentiationin vitro, and possessed greater bone formation than PAA in a rabbit femoral condyle study. This study may provide a new method for preparing bioactive bone repair materials with low immunogenicity and superior ability to stimulate differentiation of BMSCsin vitroand osteogenesisin vivo. DCBP/PAA EM might be a promising bone repair material for bone defect treatment.

The moonlighting activities of dihydrolipoamide dehydrogenase: Biotechnological and biomedical applications

Dihydrolipoamide dehydrogenase (DLDH) is a homodimeric flavin-dependent enzyme that catalyzes the NAD⁺ -dependent oxidation of dihydrolipoamide. The enzyme is part of several multi-enzyme complexes such as the Pyruvate Dehydrogenase system that transforms pyruvate into acetyl-co-A. Concomitantly with its redox activity, DLDH produces Reactive Oxygen Species (ROS), which are involved in cellular apoptotic processes. DLDH possesses several moonlighting functions. One of these is the capacity to adhere to metal-oxides surfaces. This was first exemplified by the presence of an exocellular form of the enzyme on the cell-wall surface of Rhodococcus ruber. This capability was evolutionarily conserved and identified in the human, mitochondrial, DLDH. The enzyme was modified with Arg-Gly-Asp (RGD) groups, which enabled its interaction with integrin-rich cancer cells followed by "integrin-assisted-endocytosis." This allowed harnessing the enzyme for cancer therapy. Combining the TiO₂ -binding property with DLDH's ROS-production, enabled us to develop several medical applications including improving oesseointegration of TiO₂ -based implants and photodynamic treatment for melanoma. The TiO₂ -binding sites of both the bacterial and human DLDH's were identified on the proteins' molecules at regions that overlap with the binding site of E3-binding protein (E3BP). This protein is essential in forming the multiunit structure of PDC. Another moonlighting activity of DLDH, which is described in this Review, is its DNA-binding capacity that may affect DNA chelation and shredding leading to apoptotic processes in living cells. The typical ROS-generation by DLDH, which occurs in association with its enzymatic activity and its implications in cancer and apoptotic cell death are also discussed.

Efficacy of chitinase-3-like protein 1 as an in vivo bone formation predictable marker of maxillary/mandibular bone marrow stromal cells

Introduction

Maxillary/mandibular bone marrow stromal cells (MBMSCs) are a useful cell source for bone regeneration in the oral and maxillofacial region. To further ensure the clinical application of MBMSCs in bone regenerative therapy, it is important to determine the bone formation capacity of MBMSCs before transplantation. The aim of this study is to identify the molecular marker that determines the in vivo bone formation capacity of MBMSCs.

Methods

The cell growth, cell surface antigens, in vitro and in vivo bone formation capacity of MBMSCs were examined. The amount of chitinase-3-like protein 1 (CHI3L1) secreted into the conditioned medium was quantified. The effects of CHI3L1 on the cell growth and osteogenic differentiation potential of MBMSCs and on the cell growth and migration of vascular endothelial cells and fibroblasts were examined.

Results

The cell growth, and in vitro and in vivo bone formation capacity of the cells treated with different conditions were observed. MBMSCs that secreted a large amount of CHI3L1 into the conditioned medium tended to have low in vivo bone formation capacity, whereas MBMSCs that secreted a small amount of CHI3L1 had greater in vivo bone formation capacity. CHI3L1 promoted the migration of vascular endothelial cells, and the cell growth and migration of fibroblasts.

Conclusion

Our study indicates that the in vitro osteogenic differentiation capacity of MBMSCs and the in vivo bone formation capacities of MBMSCs were not necessarily correlated. The transplantation of high CHI3L1 secretory MBMSCs may suppress bone formation by inducing fibrosis at the site. These results suggest that the CHI3L1 secretion levels from MBMSCs may be used as a predictable marker of bone formation capacity in vivo.

•

In vitro and in vivo bone formation capacities of MBMSCs were not correlated.

•

MBMSCs with high CHI3L1 secretion tended to have low in vivo bone formation.

•

MBMSCs with low CHI3L1 secretion tended to have high in vivo bone formation.

•

CHI3L1 can be in vivo bone formation capacity predictable marker of MBMSCs.

CircMAP3K11 Contributes to Proliferation, Apoptosis and Migration of Human Periodontal Ligament Stem Cells in Inflammatory Microenvironment by Regulating TLR4 via miR-511 Sponging

Growing number of studies regarding the role of circRNAs in the development of various diseases have emerged in recent years, but the role of circRNAs in periodontitis pathogenesis remains obscure. Human periodontal ligament stem cells (hPDLSCs) play a critical role in periodontal remodeling, regeneration and repair processes, and their regenerative capacity could be prohibited in local periodontal inflammatory microenvironment. Herein, we sought to uncover the molecular mechanisms of periodontitis pathogenesis by investigating the role of circMAP3K11 (hsa_circ_002284) for regenerative capacity of hPDLSCs under an inflammatory condition. The hPDLSCs isolated from periodontitis patients were used as a cell model of inflammatory microenvironment to study the effect of the circMAP3K11/miR-511-3p/TLR4 axis on the proliferation, apoptosis and migration of hPDLSCs under inflammatory conditions. Compared to the periodontal tissues from normal subjects, those from periodontitis patients exhibited higher expression levels of circMAP3K11 and TLR4, and lower expression level of miR-511-3p. Both the expressions of circMAP3K11 and TLR4 were negatively correlated with the expressions of miR-511-3p in periodontitis. In vitro studies demonstrated that circMAP3K11 is capable of enhancing hPDLSCs proliferation and migration, and reducing the apoptosis of hPDLSCs. We also found that circMAP3K11 could up-regulate the expression of transcription factors that are closely related to periodontal regeneration (Runx2, OSX, ATF4, and BSP). RT-PCR and western blot showed that the inhibitory role of miR-511-3p on TLR4 expression could be reversed by circMAP3K11, which was in line with the results of bioinformatics tools and luciferase reporter assay. Meanwhile, both in vitro and in vivo studies indicated that circMAP3K11 could reverse the effects of miR-511-3p in periodontitis, which further confirmed that circMAP3K11 functioned as a ‘sponge’ of miR-511-3p to positively regulate the expression of TLR4. Taken together, our study preliminarily uncovered a circMAP3K11/miR-511-3p/TLR4 axis that regulates the function of hPDLSCs in periodontitis, providing novel insight and scientific base in the treatment of periodontal tissue regeneration based on stem cells.

Biological evaluation of the modified nano-amorphous phosphate calcium doped with citrate/poly-amino acid composite as a potential candidate for bone repair and reconstruction

Large numbers of research works related to fabricating organic-inorganic composite materials have been carried out to mimic the natural structure of bone. In this study, a new modified n-ACP doped with citrate (n-ACP-cit)/poly (amino acids) (PAA) composite (n-ACP-cit/PAA) was synthesized by employing high bioactive n-ACP-cit and the biodegradable and biocompatible PAA copolymer. Its basic structure was characterized by X-ray diffraction spectroscopy, Fourier transformed infrared spectroscopy, and X-ray photoelectron spectroscopy. Moreover, the degradability, bioactivity, biocompatibility, and osteoconductivity of n-ACP-cit/PAA composite were evaluated in vitro and in vivo, using simulated body fluid (SBF) solution soaking test, mouse bone marrow mesenchymal stem cells proliferation and differentiation, morphological observation test, expression of genes associated with osteogenesis, and bone defect model repair test, respectively. The modified n-ACP-cit/PAA composite exhibited a much higher weight loss rate (36.01 wt.%) than that of PAA (23.99 wt.%) after immersing in SBF solution for 16 weeks and the pH values of local environment restored to neutral condition. Moreover, cells co-culturing with composites exhibited higher alkaline phosphatase activity, more calcium nodule-formation, and higher expression levels of osteogenic differentiation-related genes (Bmp-2, Colla I, OCN, OPN, and Runx-2) than that of PAA. Furthermore, the bone defect model repair test revealed that the composite could be intimately incorporated with the surrounding bone without causing any deleterious reaction and capable of guiding new bone formation. Together, these results indicated that the new modified bone repair n-ACP-cit/PAA composite material with specific characteristics may be designed for meeting diverse requirements from biomedical applications.

Complex-shaped magnetic 3D cell-based structures for tissue engineering

The use of cells as building blocks for tissue engineering purposes has been a matter of research in the recent years. Still, the fabrication of complex-shaped 3D-like constructs using living-based materials is hampered through the difficulty in recapitulating the mechanical properties of the native tissues. In an attempt to develop robust tissue-like constructs, it is herein proposed the fabrication of complex-shaped magnetic cell sheets (CSs) with improved mechanical properties for bone TE. Hence, magnetic CSs with versatile shapes and enhanced mechanical performance are fabricated using a pre-osteoblast cell line (MC3T3-E1) through an universal approach that relies on the design of the substrate, cell density and magnetic force. Results show that such magnetic CSs exhibit a Young's modulus similar to those encountered in the soft tissues. The construction of stratified CSs is also explored using MC3T3-E1 and adipose-derived stromal cells (ASCs). The role of the pre-osteoblast cell line on ASCs osteogenesis is herein investigated for the first time in layered scaffold-free structures. After 21 days, the level of osteogenic markers in the heterotypic CS (MC3T3-E1:ASCs) is significantly higher than in the homotypic one (ASCs:ASCs), even in the absence of osteogenic differentiation factors. These evidences open new prospects for the creation of mechanically robust, complex, higher-ordered and completely functional 3D cell-based materials that better resemble the native environment of in vivo tissues.

Scopolin Attenuates Osteoporotic Bone Loss in Ovariectomized Mice

Bone remodeling is a renewal process regulated by bone synthesis (osteoblasts) and bone destruction (osteoclasts). A previous study demonstrated that Lycii radicis cortex (LRC) extract inhibited ovariectomized (OVX)-induced bone loss in mice. This study investigated the anti-osteoporotic effects of bioactive constituent(s) from the LRC extract. The effective compound(s) were screened, and a single compound, scopolin, which acts as a phytoalexin, was chosen as a candidate component. Scopolin treatment enhanced alkaline phosphatase activity and increased mineralized nodule formation in MC3T3-E1 pre-osteoblastic cells. However, osteoclast differentiation in primary-cultured monocytes was reduced by treatment with scopolin. Consistently, scopolin treatment increased osteoblast differentiation in the co-culture of monocytes (osteoclasts) and MC3T3-E1 (osteoblast) cells. Scopolin treatment prevented bone mineral density loss in OVX-induced osteoporotic mice. These results suggest that scopolin could be a therapeutic bioactive constituent for the treatment and prevention of osteoporosis.

Decoupling the effects of nanopore size and surface roughness on the attachment, spreading and differentiation of bone marrow-derived stem cells

The nanopore size and roughness of nanoporous surface are two critical variables in determining stem cell fate, but little is known about the contribution from each cue individually. To address this gap, we use two-dimensional nanoporous membranes with controlled nanopore size and roughness to culture bone marrow-derived mesenchymal stem cells (BMSCs), and study their behaviors such as attachment, spreading and differentiation. We find that increasing the roughness of nanoporous surface has no noticeable effect on cell attachment, and only slightly decreases cell spreading areas and inhibits osteogenic differentiation. However, BMSCs cultured on membranes with larger nanopores have significantly fewer attached cells and larger spreading areas. Moreover, these cells cultured on larger nanopores undergo enhanced osteogenic differentiation by expressing more alkaline phosphatase, osteocalcin, osteopontin, and secreting more collagen type I. These results suggest that although both nanopore size and roughness can affect BMSCs, nanopore size plays a more significant role than roughness in controlling BMSC behavior.

Cystathionine γ-lyase-H2S facilitates mandibular defect healing via inducing osteogenic differentiation of bone marrow mesenchymal stem cells

OBJECTIVE

To investigate the effects of endogenous hydrogen sulfide (H₂S) synthase, cystathionine-γ-lyase (CSE), on the healing of mandibular defect and the osteogenic differentiation of human mandibular bone marrow mesenchymal stem cells (HM-BMMSCs).

METHODS

Sixty 8-week male C57BL/6 wild-type (WT) mice and CSE knockout (CSE^-/-) mice were divided into WT group, CSE^-/- group and CSE^-/- + GYY4137 (a slow-releasing H₂S donor) group. Mandibular defect healing in each group was identified by micro-CT. The histological staining and immunohistochemical staining were adopted to evaluate bone regeneration and reconstruction of mandibular defect. HM-BMMSCs were extracted and cultured for osteogenic induction, which were divided into control group, PAG (a CSE inhibitor) group, GYY4137 group and PAG + GYY4137 group. The mineralization of HM-BMMSCs in each group was determined by alkaline phosphatase (ALP) staining and alizarin red staining. Moreover, mRNA expressions of ALP and Runt-related transcription factor 2 (RUNX2) were detected by RT-PCR.

RESULTS

Mandibular defect healing in CSE^-/- mice was undesirable. When exogenous H₂S were supplemented to CSE^-/- mice, the new bone mass increased with higher degrees of bone mineralization and bone maturity. Bone mineral density (BMD), bone volume fraction (BV/TV) and bone trabecular thickness (Tb.Th) also significantly increased. in vitro experiments showed that PAG attenuated ALP activity and mineralized nodule formation ability in HM-BMMSCs, and repressed mRNA expressions of ALP and RUNX2. All these osteogenic indexes of HM-BMMSCs were reversed after exogenous H₂S was supplemented.

CONCLUSION

It is demonstrated that CSE deficiency thwarts the healing of mandibular defect. Blocking the synthesis of H₂S inhibits the osteogenic differentiation of HM-BMMSCs, thereby affects bone healing.

Injectable thermosensitive hybrid hydrogel containing graphene oxide and chitosan as dental pulp stem cells scaffold for bone tissue engineering

Here, we fabricated thermosensitive injectable hydrogel containing poly (N-isopropylacrylamide) (PNIPAAm)-based copolymer/graphene oxide (GO) composite with different feed ratio to chitosan (CS) as a natural polymer through physical and chemical crosslinking for the proliferation and differentiation of the human dental pulp stem cells (hDPSCs) to the osteoblasts. The PNIPAAm copolymer/GO composite was synthesized by free-radical copolymerization of (N-isopropylacrylamide) (NIPAAm), itaconic acid (IA) and maleic anhydride-modified poly(ethylene glycol) (PEG) in the presence of GO and used for the preparation of the hydrogels. The formulated hydrogels were evaluated for the porous architecture, rheological behavior, compressive strength, swelling property, in vitro degradation, hemocompatibility, biocompatibility, and differentiation. The hydrogel could enhance the deposition of minerals and the activity of alkaline phosphatase (ALP), in large part attributable to the oxygen and amine-containing functional groups of GO and CS. The engineered hydrogel could also upregulate the expression of the Runt-related transcription factor 2 and osteocalcin in the hDPSCs cultivated in both the normal and osteogenic media. It seems to promote the absorption of osteogenic inducer too. Based on our findings, the engineered hydrogel demonstrated the osteogenic potential, upon which it is proposed as a constructing scaffold in bone tissue engineering for the transplantation of hDPSCs.

Optimization of culture duration of bone marrow cells before transplantation with a β-tricalcium phosphate/recombinant collagen peptide hybrid scaffold

INTRODUCTION

Currently, various kinds of materials are used for the treatment of bone defects. In general, these materials have a problem of formativeness. The three -dimensional (3D) printing technique has been introduced to fabricate artificial bone with arbitrary shapes, but poor bone replacement is still problematic.Our group has created a β⁻tricalcium phosphate (β⁻TCP) scaffold by applying 3D printing technology. This scaffold has an arbitrary shape and an internal structure suitable for cell loading, growth, and colonization. The scaffold was coated with a recombinant collagen peptide (RCP) to promote bone replacement.As indicated by several studies, cells loaded to scaffolds promote bone regeneration, especially when they are induced osteoblastic differentiation before transplantation. In this study, culture duration for bone marrow cells was optimized before being loaded to this new scaffold material.

METHOD

Bone marrow cells isolated from C57BL/6J mice were subjected to osteogenic culture for 4, 7, and 14 days. The differentiation status of the cells was examined by alkaline phosphatase staining, alizarin red staining, and real-time RT-PCR for differentiation markers. In addition, the flow of changes in the abundance of endothelial cells and monocytes was analyzed by flow cytometry according to the culture period of bone marrow cells.Next, cells at days 4, 7, and 14 of culture were placed on a β-TCP/RCP scaffold and implanted subcutaneously into the back of C57BL/6J mice. Grafts were harvested and evaluated histologically 8 weeks later. Finally, Cells cultured for 7 days were also transplanted subperiosteally in the skull of the mouse with scaffolds.

RESULT

Alkaline phosphatase staining was most prominent at 7 days, and alizarin red staining was positive at 14 days. Real-time RT-PCR revealed that Runx2 and Alp peaked at 7 days, while expression of Col1a1 and Bglap was highest at 14 days. Flow cytometry indicated that endothelial cells increased from day 0 to day 7, while monocytes increased continuously from day 0 to day 14. When transplanted into mice, the scaffold with cells cultured for 7 days exhibited the most prominent osteogenesis. The scaffold, which was transplanted subperiosteally in the skull, retained its shape and was replaced with regenerated bone over a large area of the field of view.

CONCLUSION

Osteoblasts before full maturation are most efficient for bone regeneration, and the pre-culture period suitable for cells to be loaded onto a β-TCP/RCP hybrid scaffold is approximately 7 days.This β-TCP/RCP hybrid scaffolds will also be useful for bone augmentation.

Biomechanical stimulation effects on the metabolism of adipocyte

Adipose tissue plays a leading role in obesity, which, in turn, can lead to Type 2 diabetes. Adipocytes (AD) respond to the biomechanical stimulation experienced in fat tissue under static stretch during prolonged sitting or lying. To investigate the effect of such chronic stimulation on adipocyte cell metabolism, we used an in vitro system to mimic the static stretch conditions. Under in vitro culture stretching, cells were analyzed at the single-cell level and we measured an increase in the projected area of the AD and higher content of lipid droplets. A decrease in the projected area of these cells' nucleus is associated with peroxisome proliferator-activated receptor-gamma expression and heterochromatin. This is the first study to reveal proteins that were altered under static stretch following a mass spectrometry analysis and main pathways that affect cell fate and metabolism. Bioinformatics analysis of the proteins indicated an increase in mitochondrial activity and associated pathways under static stretch stimulation. Quantification of the mitochondrial activity by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) assay and the ATPase related proteins specifically measured ATP5B indicated an increase in adipogenesis which points to a higher rate of cell metabolism under static stretch. In summary, our results elaborate on the metabolism of AD exposed to biomechanical stimulation, that is, associated with altered cellular protein profile and thereby influenced cell fate. The static stretch stimulation accelerated adipocyte differentiation through increased mitochondrial activity. Hence, in this study, we introduce a new perspective in understanding the molecular regulation of mechano-transduction in adipogenesis.

Concentrated Growth Factor Promotes Dental Pulp Cells Proliferation and Mineralization and Facilitates Recovery of Dental Pulp Tissue

Background

Dental pulp cells (DPCs) play vital roles in the recovery of dental pulp tissue. Concentrated growth factor (CGF) can promote proliferation and mineralization of various cells. However, the functions of CGF on DPCs and dental pulp tissue are unclear. The object of our study was to identify the roles of CGF in DPCs proliferation and mineralization in vitro and to assess the effects of CGF on direct pulp capping in vivo.

Material/Methods

We performed CCK-8 and Transwell assay to detect proliferation and migration activity of DPCs. Alizarin Red staining was performed to examine mineralized nodules. Alkaline phosphatase activity test was used to measure the mineralization capacity of DPCs. We assessed the odontogenic differentiation gene expression level by Western blot and qPCR. The effect of CGF on direct pulp capping in vivo were evaluated by radiography and histopathology.

Results

CGF increased the number of proliferative and migratory DPCs. CGF enhanced DPCs mineralized nodules and improved the gene expression levels of DSPP, DMP-1, BSP, and ALP. CGF upregulated the protein levels of ALP, BMP2, SMAD5, Runx2, and p-Smad, and the effect could be partially reversed by Noggin. CGF promoted pulp recovery and kept its vitality in directly pulp capping.

Conclusions

CGF promotes DPCs proliferation and mineralization. It regulates the mineralization of DPCs via the BMP2/SMAD5/Runx2 signaling pathway. CGF can be used as the effective graft for direct pulp capping.

The mechanism research of non-Smad dependent TAK1 signaling pathway in the treatment of bone defects by recombination BMP-2-loaded hollow hydroxyapatite microspheres/chitosan composite

AIMS

The present study aimed to evaluate whether the non-Smad dependent TAK1 signaling pathway (BMP-2-TAK1-p38-Osx signaling pathway) played an important role in bone repair mediated by hollow hydroxyapatite (HA) microspheres/chitosan (CS) composite.

METHODS

Firstly, the biological activity of rhBMP-2 released from the complex was investigated. Then, differentiation test of osteoblasts including ALP activity and calcium deposition, X-ray scoring and three-point bending test were performed. Finally, the mRNAs expression of TAK1, p38, Osx and osteogenic markers was tested by reverse transcription-polymerase chain reaction (RT-PCR).

RESULTS

RhBMP-2 could be loaded and released from the complex in bioactive form. Additionally, the complex provided a prolonged period of time compared with HA/CS scaffolds. Serum ALP activity was significantly decreased in the TAK1 inhibitor group and p38 inhibitor group. In the X-ray radiography, bone callus was observed in rhBMP-2-loaded hollow HA microspheres/CS composite group. In the three-point bending test, load values in p38 inhibitor group decreased. In the animal model, the mRNA expression of BSP on day 90 was significantly decreased in the p38 inhibitor group and TAK1 inhibitor group. In MC3T3-E1 cells, the mRNA expression of OSX was remarkably up-regulated in both rhBMP-2 group or rhBMP-2-loaded hollow HA microspheres/CS composite group; while the mRNA expression of OSX was significantly down-regulated in TAK1 inhibitor group and p38 inhibitor group.

CONCLUSION

The BMP-2-TAK1-p38-OSX signaling pathway may play an important role in bone formation and repair mediated by rhBMP-2-loaded hollow HA microspheres/CS composite.

Osteonectin regulates the extracellular matrix mineralization of osteoblasts through P38 signaling pathway

Osteonectin binds strongly to type I collagen and hydroxyapatite and plays a crucial role in extracellular matrix mineralization. Previous studies have also shown that p38 signaling pathway is an important regulator for osteoblast mineralization. This study focused on the role of osteonectin in regulating extracellular matrix mineralization via the p38 signaling pathway. Osteoblasts were isolated and cultured from parietal bones of neonatal Sprague-Dawley rats. The gene and protein expressions of noncollagen proteins (BSP, bone sialoprotein; OCN, osteocalcin; OPN, osteopontin), p38 mitogen-activated protein kinase, and SIBLINGs (Small Integrin-Binding LIgand N-linked Glycoproteins) members (DMP1, dentine matrix protein 1, DSPP, dentin sialophosphoprotein, and MEPE, matrix extracellular phosphoglycoprotein) were detected by reverse-transcription quantitative polymerase chain reaction and western blot analysis. Alizarin red staining, intracellular calcium assay, and transmission electron microscopy were used to detect mineralization. Initially, by adding osteonectin at different concentrations in osteoblasts and detecting the above mineralization indexes, 1 µg/ml was determined to be the optima osteonectin concentration, which significantly increased gene expressions of BSP, OPN, OCN, DMP1, MEPE, DSPP, and p38 in osteoblasts, p38 and p-p38 protein expressions were also significantly increased, mineralized nodules were significantly enhanced; when added with SB203580 (a specific inhibitor for p38) these effects were inhibited. Furthermore, osteoblasts transfected with Ad-p38 also significantly upregulated the protein and gene expressions of noncollagens and SIBLINGs members, whereas transfection of p38-rhRNA showed the opposite effect. Our data suggest that osteonectin regulates the extracellular matrix mineralization of osteoblasts through the P38 signaling pathway.

Scalable MSC-derived bone tissue modules: In vitro assessment of differentiation, matrix deposition, and compressive load bearing

Enhancements to the mechanical properties of modular designs for bone tissue engineering could increase their clinical applications. In this study, bone marrow mesenchymal stem cells (MSCs) and hydroxyapatite (HAP) microgranules were encapsulated in polyelectrolyte complex membranes composed of chondroitin 4-sulfate (C4S), carboxymethyl cellulose (CMC) and chitosan. Microcapsules were formed with and without HAP microgranules, and cultured in either osteoinduction medium (Osteo) or expansion medium (Exp) to produce four microcapsule conditions: Osteo, Osteo+HAP, Exp, and Exp+HAP. Microcapsules facilitated alkaline phosphatase secretion and deposition of bone specific proteins (osteocalcin and osteopontin) by encapsulated MSCs over 28 days of osteogenic culture. SEM and micro-CT analysis showed cell-deposited mineral covering the surfaces of the HAP microgranules and interior of the microcapsule membrane. The mineralized microcapsules could be combined and fused into cylindrical constructs (4 × 5 mm, W × H), and uniaxial compression tests confirmed that microcapsule mineralization greatly enhanced the yield stresses of Osteo and Osteo+HAP fused constructs (10.4 ± 4.4 MPa and 6.4 ± 2.8 MPa), compared to only HAP microgranules (Exp+HAP, 0.5 ± 0.3 MPa). The C4S/CMC/Chitosan microcapsules provide a platform allowing pre-mineralization of microcapsules in vitro for later assembly of larger load-bearing constructs, or for use as an injectable bone regeneration strategy. STATEMENT OF SIGNIFICANCE: Clinical translation of bone tissue engineering is limited by the difficulty of generating space filling implants that both resist compressive loading, and simultaneously deliver cells throughout the bone defect. Here, we present the design of a microcapsule system containing both stem cells capable of rebuilding bone tissue, and a mechanically tough bone-like mineral, that imparts compression resistance to the microcapsules. The microcapsules support stem cell differentiation to an osteogenic phenotype, that can mineralize the microcapsule membrane and interior. The mineralized microcapsules can be assembled into larger bone constructs, and have mechanical properties on par with trabecular bone.

The Synergic Effect of Terpenoid and Steroidal Saponins Can Improve Bone Healing, by Promoting the Osteogenic Commitment of Adipose Mesenchymal Stem Cells: An In Vitro Study

Bone regeneration involves several biological processes that consistently impact the quality of tissue healing. An important step consists of the local recruitment and differentiation of mesenchymal stem cells that migrate in the site to regenerate from bone marrow. Mesenchymal stem cells (MSCs) may be pushed towards osteogenic commitment by specific substances, often naturally present in plants. Yunnan Baiyao (YB) is a Chinese herbal medicine, mainly working through the synergic effect of terpenoid and steroidal saponins. YB is well known for its numerous biomedical effects, including the ability to favor improved bone tissue healing. In our in vitro study, we used adipose mesenchymal stem cells (ADSCs) as a study-model: We selected samples to harvest and isolate ADSCs and investigate their viability; moreover, we performed bone-related gene expression to evaluate the differentiation of MSCs. To confirm this behavior, we analyzed alkaline phosphate activity and calcium deposition, with ADSCs cultured in basal and osteogenic media, with YB at different concentrations in the medium, and at different time-points: 7, 14 and 21 days. Our results indicate that the synergic effect of terpenoid and steroidal saponins slightly favor the late ADSCs differentiation towards the osteoblasts phenotype. In osteogenic committed cells, the treatment with the lower dose of YB promoted the up-regulation of the alkaline phosphatase gene (ALPL) at day seven and 14 (p < 0.01); at day 21, the alkaline phosphatase (ALP) activity showed a slight increase, although in basal condition it maintains low rates. We assume that such molecular synergy can promote the osteogenic commitment of adipose mesenchymal stem cells, thus improving the timing and the quality of bone healing.

Design of fibronectin type III domains fused to an elastin-like polypeptide for the osteogenic differentiation of human mesenchymal stem cells

Extracellular matrix (ECM) including fibronectin (FN) and elastin plays a pivotal role in providing a microenvironment to support tissue regeneration in stem cell therapy. To develop a novel biomimetic ECM for stem cell differentiation, we engineered FN type III 9 and 10 domains fused to elastin-like polypeptides (FN-ELPs). The recombinant FN-ELP fusion protein was expressed in Escherichia coli and purified by inverse transition cycling. Human mesenchymal stem cells (hMSCs) cultured on plates coated with FN-ELP had significantly greater adhesion activity and proliferation than cells grown on non-coated plates. FN-ELP induced the osteogenic differentiation by elevating alkaline phosphatase (ALP) and mineralization activity of hMSCs. Furthermore, the osteogenic marker gene expressions of ALP, collagen type I (Col I), osteopontin (OPN), and transcriptional coactivator with a PDZ-binding motif (TAZ) were increased in hMSCs cultured on plates coated with FN-ELP. We reported a novel biomimetic ECM with potential for bone regeneration that promotes the osteogenic differentiation of hMSCs.

Betulin Promotes Differentiation of Human Osteoblasts In Vitro and Exerts an Osteoinductive Effect on the hFOB 1.19 Cell Line Through Activation of JNK, ERK1/2, and mTOR Kinases

Although betulin (BET), a naturally occurring pentacyclic triterpene, has a variety of biological activities, its osteogenic potential has not been investigated so far. The aim of this study was to assess the effect of BET on differentiation of human osteoblasts (hFOB 1.19 and Saos-2 cells) in vitro in osteogenic (with ascorbic acid as an osteogenic supplement) and osteoinductive (without an additional osteogenic supplement) conditions. Osteoblast differentiation was evaluated based on the mRNA expression (RT-qPCR) of Runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), type I collagen-α1 (COL1A1), and osteopontin (OPN). Additionally, ALP activity and production of COL1A1 (western blot analysis) and OPN (ELISA) were evaluated. The level of mineralization (calcium accumulation) was determined with Alizarin red S staining. BET upregulated the mRNA level of RUNX2 and the expression of other osteoblast differentiation markers in both cell lines (except the influence of BET on ALP expression/activity in the Saos-2 cells). Moreover, it increased mineralization in both cell lines in the osteogenic conditions. BET also increased the mRNA level of osteoblast differentiation markers in both cell lines (except for ALP in the Saos-2 cells) in the osteoinductive conditions, which was accompanied with increased matrix mineralization. The osteoinductive activity of BET in the hFOB 1.19 cells was probably mediated via activation of MAPKs (JNK and ERK1/2) and mTOR, as the specific inhibitors of these kinases abolished the BET-induced osteoblast differentiation. Our results suggest that BET has the potential to enhance osteogenesis.

Modulation of osteogenic and myogenic differentiation by a phytoestrogen formononetin via p38MAPK-dependent JAK-STAT and Smad-1/5/8 signaling pathways in mouse myogenic progenitor cells

Formononetin (FN), a typical phytoestrogen has attracted substantial attention as a novel agent because of its diverse biological activities including, osteogenic differentiation. However, the molecular mechanisms underlying osteogenic and myogenic differentiation by FN in C2C12 progenitor cells remain unknown. Therefore the objective of the current study was to investigate the action of FN on myogenic and osteogenic differentiation and its impact on signaling pathways in C2C12 cells. FN significantly increased myogenic markers such as Myogenin, myosin heavy chains, and myogenic differentiation 1 (MyoD). In addition, the expression of osteogenic specific genes alkaline phosphatase (ALP), Run-related transcription factor 2(RUNX2), and osteocalcin (OCN) were up-regulated by FN treatment. Moreover, FN enhanced the ALP level, calcium deposition and the expression of bone morphogenetic protein isoform (BMPs). Signal transduction pathways mediated by p38 mitogen-activated protein kinase (p38MAPK), extracellular signal-related kinases (ERKs), protein kinase B (Akt), Janus kinases (JAKs), and signal transducer activator of transcription proteins (STATs) in myogenic and osteogenic differentiation after FN treatment were also examined. FN treatment activates myogenic differentiation by increasing p38MAPK and decreasing JAK1-STAT1 phosphorylation levels, while osteogenic induction was enhanced by p38MAPK dependent Smad, 1/5/8 signaling pathways in C2C12 progenitor cells.

Preparation, Characterization and In Vitro Biological Evaluation of a Novel Pearl Powder/Poly-Amino Acid Composite as a Potential Substitute for Bone Repair and Reconstruction

Many studies about fabricating organic-inorganic composite materials have been carried out in order to mimic the natural structure of bone. Pearl, which has a special block-and-mortar hierarchical structure, is a superior bone repair material with high osteogenic activity, but it shows few applications in the clinical bone repair and reconstruction because of its brittle and uneasily shaped properties. In this work, pearl powder (P)/poly (amino acid) (PAA) composites were successfully prepared by a method of in situ melting polycondensation to combine the high osteogenic activity of the pearl and the pliability of the PAA. The mechanical properties, in vitro bioactivity and biocompatibility as well as osteogenic activity of the composites were investigated. The results showed that P/PAA composites have both good mechanical properties and bioactivity. The compressive strength, bending strength and tensile strength of the composites reached a maximum of 161 MPa, 50 MPa and 42 MPa, respectively; in addition, apatite particles successfully deposited on the composites surface after immersion in simulated body fluid (SBF) for 7 days indicated that P/PAA composites showed an enhanced mineralization capacity and bioactivity due to incorporation of pearl powder and PAA. The cell culture results revealed that higher cell proliferation and better adhesion morphology of mouse bone marrow mesenchymal stem cells (MSCs) appeared on the composite surface. Moreover, cells growing on the surface of the composites exhibited higher alkaline phosphatase (ALP) activity, more calcium nodule-formation, and higher expression levels of osteogenic differentiation-related genes (COL 1, RunX2, OCN, and OPN) than cells grown on PAA surface. The P/PAA composites exhibited both superior mechanical properties to the pearl powder, higher bioactivity and osteogenic capability compared with those of PAA.

Chitosan-based composite bilayer scaffold as an in vitro osteochondral defect regeneration model

Prolonged osteochondral tissue damage can result in osteoarthritis and decreased quality of life. Multiphasic scaffolds, where different layers model different microenvironments, are a promising treatment approach, yet stable joining between layers during fabrication remains challenging. Here, a bilayer scaffold for osteochondral tissue regeneration was fabricated using thermally-induced phase separation (TIPS). Two distinct polymer solutions were layered before TIPS, and the resulting porous, bilayer scaffold was characterized by seamless interfacial integration and a mechanical stiffness gradient reflecting the native osteochondral microenvironment. Chitosan is a critical component of both scaffold layers to facilitate cell attachment and the formation of polyelectrolyte complexes with other biologically relevant natural polymers. The articular cartilage region was optimized for hyaluronic acid content and stiffness, while the subchondral bone region was defined by higher stiffness and osteoconductive hydroxyapatite content. Following co-culture with chondrocyte-like (SW-1353 or mesenchymal stem cells) and osteoblast-like cells (MG63), cell proliferation and migration to the interface along with increased gene expression associated with relevant markers of osteogenesis and chondrogenesis indicates the potential of this bilayer scaffold for osteochondral tissue regeneration.