Field-enhanced scanning near-field optical microscopy

Highly Localized Optical Field Enhancement at Neon Ion Sputtered Tungsten Nanotips

We present laser-driven rescattering of electrons at a nanometric protrusion (nanotip), which is fabricated with an in situ neon ion sputtering technique applied to a tungsten needle tip. Electron energy spectra obtained before and after the sputtering show rescattering features, such as a plateau and high-energy cutoff. Extracting the optical near-field enhancement in both cases, we observe a strong increase of more than 2-fold for the nanotip. Accompanying finite-difference time-domain (FDTD) simulations show a good match with the experimentally extracted near-field strengths. Additionally, high electric field localization for the nanotip is found. The combination of transmission electron microscope imaging of such nanotips and the determination of the near-field enhancement by electron rescattering represent a full characterization of the electric near-field of these intriguing electron emitters. Ultimately, nanotips as small as single nanometers can be produced, which is of utmost interest for electron diffraction experiments and low-emittance electron sources.

Modern Scattering-Type Scanning Near-Field Optical Microscopy for Advanced Material Research

Infrared and optical spectroscopy represents one of the most informative methods in advanced materials research. As an important branch of modern optical techniques that has blossomed in the past decade, scattering-type scanning near-field optical microscopy (s-SNOM) promises deterministic characterization of optical properties over a broad spectral range at the nanoscale. It allows ultrabroadband optical (0.5-3000 µm) nanoimaging, and nanospectroscopy with fine spatial (<10 nm), spectral (<1 cm^-1 ), and temporal (<10 fs) resolution. The history of s-SNOM is briefly introduced and recent advances which broaden the horizons of this technique in novel material research are summarized. In particular, this includes the pioneering efforts to study the nanoscale electrodynamic properties of plasmonic metamaterials, strongly correlated quantum materials, and polaritonic systems at room or cryogenic temperatures. Technical details, theoretical modeling, and new experimental methods are also discussed extensively, aiming to identify clear technology trends and unsolved challenges in this exciting field of research.

Fundamental Limits on Measuring the Rotational Constraint of Single Molecules Using Fluorescence Microscopy

Optical fluorescence imaging is capable of measuring both the translational and rotational dynamics of single molecules. However, unavoidable measurement noise will result in inaccurate estimates of rotational dynamics, causing a molecule to appear to be more rotationally constrained than it actually is. We report a mathematical framework to compute the fundamental limit of accuracy in measuring the rotational mobility of dipolelike emitters. By applying our framework to both in-plane and three-dimensional methods, we provide a means to choose the optimal orientation-measurement technique based on experimental conditions.

Super-resolution optical microscopy based on scannable cantilever-combined microsphere

We report an ingenious method of super-resolution optical microscopy utilizing scannable cantilever-combined microsphere. By scanning the microsphere over the sample surface in a cantilever-combined microsphere-sample contact state, super-resolution images can be acquired at arbitrary sample regions through near-field information collection by the microsphere. In addition, such a state can effectively reduce the possibility of breaking the cantilever and damaging the microsphere or sample surface. This work has developed a new method and technique of sub-diffraction-limit optical microscopy, and can be practically applied in various fields of micro/nanoscopy.

Ultrafast and nanoscale plasmonic phenomena in exfoliated graphene revealed by infrared pump-probe nanoscopy

Pump-probe spectroscopy is central for exploring ultrafast dynamics of fundamental excitations, collective modes, and energy transfer processes. Typically carried out using conventional diffraction-limited optics, pump-probe experiments inherently average over local chemical, compositional, and electronic inhomogeneities. Here, we circumvent this deficiency and introduce pump-probe infrared spectroscopy with ∼ 20 nm spatial resolution, far below the diffraction limit, which is accomplished using a scattering scanning near-field optical microscope (s-SNOM). This technique allows us to investigate exfoliated graphene single-layers on SiO2 at technologically significant mid-infrared (MIR) frequencies where the local optical conductivity becomes experimentally accessible through the excitation of surface plasmons via the s-SNOM tip. Optical pumping at near-infrared (NIR) frequencies prompts distinct changes in the plasmonic behavior on 200 fs time scales. The origin of the pump-induced, enhanced plasmonic response is identified as an increase in the effective electron temperature up to several thousand Kelvin, as deduced directly from the Drude weight associated with the plasmonic resonances.

Fully Metal-Coated Scanning Near-Field Optical Microscopy Probes with Spiral Corrugations for Superfocusing under Arbitrarily Oriented Linearly Polarised Excitation

We study the effect of a spiral corrugation on the outer surface of a fully metal-coated scanning near-field optical microscopy (SNOM) probe using the finite element method. The introduction of a novel form of asymmetry, devoid of any preferential spatial direction and covering the whole angular range of the originally axisymmetric tip, allows attaining strong field localization for a linearly polarised mode with arbitrary orientation. Compared to previously proposed asymmetric structures which require linearly polarised excitation properly oriented with respect to the asymmetry, such a configuration enables significant simplification in mode injection. In fact, not only is the need for the delicate procedure to generate radially polarised beams overcome, but also the relative alignment between the linearly polarised beam and the tip modification is no longer critical.

Light microscopy with doughnut modes: a concept to detect, characterize, and manipulate individual nanoobjects

Higher order laser modes, mainly called doughnut modes (DMs) have use in many different branches of research, such as, bio-imaging, material science, single-molecule microscopy, and spectroscopy. The main reason of their increasing importance is that recently, the techniques to generate well-defined DMs have been refined or rediscovered. Although their potential is still not fully utilized, their specifically polarized field distribution gives rise to a wide field of applications. They are contributing to complete our fundamental knowledge of the optical properties of single emitting species, such as molecules, nanoparticles, or quantum dots, offering insight into the three-dimensional dipole or particle orientation in space. The perfect zero intensity in the focus center qualifies some DMs for stimulated emission depletion (STED) microscopy. For the same reason, they have been suggested for trapping and tweezing applications.

Gold nanocone near-field scanning optical microscopy probes

Near-field scanning optical microscopy enables the simultaneous topographical and subdiffraction limited optical imaging of surfaces. A process is presented for the implementation of single individually engineered gold cones at the tips of atomic force microscopy cantilevers. These cantilevers act as novel high-performance optical near-field probes. In the fabrication, thin-film metallization, electron beam induced deposition of etch masks, and Ar ion milling are combined. The cone constitutes a well-defined highly efficient optical antenna with a tip radius on the order of 10 nm and an adjustable plasmon resonance frequency. The sharp tip enables high resolution topographical imaging. By controllably varying the cone size, the resonance frequency can be adapted to the application of choice. Structural properties of these sharp-tipped probes are presented together with topographical images recorded with a cone probe. The antenna functionality is demonstrated by gathering the near-field enhanced Raman signature of individual carbon nanotubes with a gold cone scanning probe.

Quantitative analysis of localized surface plasmons based on molecular probing

We report on the quantitative characterization of the plasmonic optical near-field of a single silver nanoparticle. Our approach relies on nanoscale molecular molding of the confined electromagnetic field by photoactivated molecules. We were able to directly image the dipolar profile of the near-field distribution with a resolution better than 10 nm and to quantify the near-field depth and its enhancement factor. A single nanoparticle spectral signature was also assessed. This quantitative characterization constitutes a prerequisite for developing nanophotonic applications.

Properties and applications of colloidal nonspherical noble metal nanoparticles

Nanoparticles of noble metals belong to the most extensively studied colloidal systems in the field of nanoscience and nanotechnology. Due to continuing progress in the synthesis of nanoparticles with controlled morphologies, the exploration of unique morphology-dependent properties has gained momentum. Anisotropic features in nonspherical nanoparticles make them ideal candidates for enhanced chemical, catalytic, and local field related applications. Nonspherical plasmon resonant nanoparticles offer favorable properties for their use as analytical tools, or as diagnostic and therapeutic agents. This Review highlights morphology-dependent properties of nonspherical noble metal nanoparticles with a focus on localized surface plasmon resonance and local field enhancement, as well as their applications in various fields including Raman spectroscopy, fluorescence enhancement, analytics and sensing, photothermal therapy, (bio-)diagnostics, and imaging.

Spectroscopic Probing of Dynamic Changes during Stimulation and Cell Remodeling in the Single Cardiac Myocyte

Optical microscopy, involving both fluorescence imaging and confocal Raman microspectroscopy, was used to visualize single, isolated, electrically active heart muscle cells. For example, short-term, dynamic changes in Raman bands during the contraction cycle, as well as persistent band changes during structural remodeling (microscopic rearrangements of cellular structures) in culture over longer periods of time, were obtained from the cellular content (sarcoplasm) of the heart cells. The results of the short-term studies, collected during electrical stimulation, showed dynamic changes in the Raman amide I band intensity, which occurred in phase with changes in cell length during cardiomyocyte contraction. The longer term studies of quiescent cardiomyocytes in culture over 3 days revealed a progressive and sustained increase in the intensity of the amide I band. Over the same period of culture, a decrease in the number of t-tubules (invaginations of the cell membrane, sarcolemma, which ensure the spreading of the action potential into the bulk of the sarcoplasm) was observed using confocal z-sections of the fluorescently labeled sarcolemma. The ability to measure both short-term dynamic changes associated with stimulated contraction and longer term persistent remodeling in the structure of intracellular macromolecules is valuable for assessing the physiological state of the cell, in real time.

Numerical study of an apertureless near field scanning optical microscope probe under radial polarization illumination

An axially symmetric three-dimensional finite element method model is applied to investigate the electromagnetic field distribution in the vicinity of a silver coated glass tip. Under radially polarized illumination, a strongly enhanced field located at the apex of the tip is found due to the constructive interference of surface plasmon propagating at the air/silver interface. The enhancement factor and surface plasmon resonance excitation are analyzed systematically. The optimal condition for field enhancement is investigated through the exploration of different taper angles of the tip and the illumination geometry. The numerical studies show that a significantly enhanced localized electromagnetic field with a full-width-half-maximum of 10 nm is obtainable with 632.8 nm optical excitation.

Raman spectroscopy on transition metals

Surface-enhanced Raman spectroscopy (SERS) has developed into one of the most important tools in analytical and surface sciences since its discovery in the mid-1970s. Recent work on the SERS of transition metals concluded that transition metals, other than Cu, Ag, and Au, can also generate surface enhancement as high as 4 orders of magnitude. The present article gives an overview of recent progresses in the field of Raman spectroscopy on transition metals, including experimental, theory, and applications. Experimental considerations of how to optimize the experimental conditions and calculate the surface enhancement factor are discussed first, followed by a very brief introduction of preparation of SERS-active transition metal substrates, including massive transition metal surfaces, aluminum-supported transition metal electrodes, and pure transition metal nanoparticle assembled electrodes. The advantages of using SERS in investigating surface bonding and reaction are illustrated for the adsorption and reaction of benzene on Pt and Rh electrodes. The electromagnetic enhancement, mainly lightning-rod effect, plays an essential role in the SERS of transition metals, and that the charge-transfer effect is also operative in some specific metal-molecule systems. An outlook for the field of Raman spectroscopy of transition metals is given in the last section, including the preparation of well-ordered or well-defined nanostructures, and core-shell nanoparticles for investigating species with extremely weak SERS signals, as well as some new emerging techniques, including tip-enhanced Raman spectroscopy and an in situ measuring technique.