Pollen micromorphological analysis of tribe Acacieae (Mimosaceae) with LM and SEM techniques

Morpho-palynological and anatomical studies in desert cacti (Opuntia dillenii and Opuntia monacantha) using light and scanning electron microscopy

Opuntia is the most diverse and widely distributed drought resistant promising genus of family Cactaceae. The cladodes were utilized to quantify the chemical composition of these plants helpful in lignocellulose conversion and their application towards biofuel production. The present study was aimed to evaluate and compare the taxonomic relationship based on morphology, stem anatomy and palynology of important desert cacti including Opuntia dillenii and Opuntia monacantha. This study also evaluates the potential usefulness of morphological, anatomical and pollen traits using light and scanning electron microscopy. The obtained microcharacters of stem and flowers are considered diagnostic at the generic and specific levels. Some distinguishing morphological features observed were elliptical to obovate cladodes, 1-7 spines per areole and presence of glochidia in O. dillenii. Pollen and stem anatomical characters of the studied taxa are considered highly diagnostic at the generic and species levels. The epidermis has irregular and wavy cells, with straight to sinuate wall pattern and paracytic stomata. Pollen grains appear as pantoporate and prolate spheroidal having reticulate to perforate-reticulate sculpturing while exine semi-tectate to tectate. The taxonomic features studied could be valuable to elaborate and helpful in correctly identification of Opuntia species. The methods of diverse microscopic examination also providing sufficient evidence about the taxonomy of the Opuntia species.

Light and scanning electron microscopic observation of palynological characteristics in spineless Astragalus L. (Fabaceae) and its taxonomic significance

Palynological characterization is considered to be one of the significant taxonomic tools for the delimitation and identification of morphologically complicated taxa. Hence, the pollen morphology of 12 species of spineless Astragalus L. was examined using light and scanning electron microscopy. Studied pollen were small to medium, monad, prolate to per-prolate and tricolporate type in all studied taxa. The exine sculpturing varied from reticulate to microreticulate whereas colpus ornamentation ranged from scabrate to granulate. Furthermore, maximum polar and equatorial diameter was recorded in Astragalus leucocephalus Bunge. (45.00 μm) and A. pyrrhotrichus Boiss. (22.91 μm) while minimum in A. amherstianus Benth. ex Royle (28.75 μm) and A. amherstianus Benth. ex Royle (15.00 μm), respectively. Similarly, the ratio of polar to equatorial diameter was recorded maximum in A. ophiocarpus Boiss. (2.05). The width of colpi was larger in A. hamosus L. (1.29 μm) and smaller in A. ophiocarpus Boiss. (0.62 μm). We have also found the maximum value of mesocolpium in A. retamocarpus Boiss. (2.08 μm) while minimum in A. oxyglottis Steven ex M.Bieb. (1.87 μm). The quantitative pollen attributes helped in the development of pollen keys for the accurate and quick identification of the studied species. Furthermore, ordination and cluster analysis were performed for the differentiation of the investigated taxa at species level. Based on our results, we conclude that pollen features can be used for the delimitation and identification of the studied taxa.

Pollen morphology of selected melliferous plants and its taxonomic implications using microscopy

This research aimed to explore the melliferous bee flora pollen from arid zones of District Attock, Islamabad Capital and Rawalpindi. Morpho-palynological features has provided key information for the classification and help to explain the taxonomy of several genera and species. Therefore, in this work, we examined the morphological characters of pollen potentially to be used for the species delimitation of bee flora. A total of 18 bee floral species, classified into 12 different families were collected, pressed, identified and then acetolyized to observe the grains under microscopy. Bee pollen can be described by small, medium to large sized morphotypes presenting five types of shapes, prolate spheroidal in (seven species), sub-prolate (six species), oblate spheroidal (three species), oblate and prolate (one species each) was examined. The observed polar and equatorial diameter were found maximum in Zea mays 73.5 μm and Pelargonium inquinans 66.75 μm respectively. Pollen of six different types was found namely: tricolporate, 3-zonocolporate, monoportae, tetracolporate, tetraporate and mononsulcate. Whereas highest value of colpi length was measured in Grewia tenax (24.55 μm). Exine surface nature of pollen was examined echinate psilate and scabrate. Exine thickness noted to be maximum in Verbena tenuisecta (8.40 μm) and minimum in Citrus macrocarpa (0.4 μm). Bee floral species considered difficult to identify based on other morphological traits were successfully distinguished using pollen quantitative and qualitative traits, confirming the importance of pollen morphology to diagnose characters to correctly identify honeybee flora.

Palyno-anatomical microscopic characterization of selected species of Boraginaceae and Fabaceae

Palyno-anatomical characterization of some selected species of Boraginaceae and Fabaceae using light microscopy (LM) and scanning electron microscopy (SEM) was conducted. Six species of them belongs to four genera of family Boraginaceae and other six species belongs to four genera of Fabaceae. The current study aimed to investigate palyno-anatomical features for correct identification and taxonomic significance. Pollen grains were acetolyzed and observed both qualitatively and quantitatively through light microscopy and scanning electron microscopy. Statistical data was analyzed through cluster analysis which categorized plants into clusters. Principal component analysis (PCA) was carried out to illustrate morphological variation among selected plant species. Studied plant species showed variation in shape, size, aperture type, exine ornamentation of pollen, size and shape of epidermal cells, types of stomata, guard cells, subsidiary cells and trichome types. Exine thickness was recorded maximum 2.30 ± 0.1 μm in Lablab purpureus and minimum 1.05 ± 0.2 in Gastrocotyle hispida. PCA summarized 73.78% of accumulative variance. Trichome index was observed highest 62% on the adaxial surface of Heliotropium europaeum and lowest 21% on adaxial surface of L. purpureus. These findings reinforce the importance of palyno-anatomical features in the characterization and identification of taxa. It was concluded that description of palyno-anatomical characteristics presented in this study, highly contribute to our knowledge for correct identification of plant species.

Use of scanning electron microscopy to analyze sculpturing pattern and internal features of pollen grain wall in some members of Astragaleae (subfamily: Papilionoidae)

Palynological features of tribe Astagaleae L. have been observed with scanning electron microscopy (SEM), to assess features that can be used to re-examine the placement and taxonomic position of tribe. The palynomorph attributes of 10 species included in three genera of Astragaleae (Astragalus L., Glycyrrhiza L., and Oxytropis DC.) are investigated. The assignment of genus Oxytropis in tribe Astragaleae was also reevaluated based on pollen characters. Pollen appear to be prolate, prolate-spheroidal, and subprolate. Polar axis size (P) varies from 31.3 μm ±1 to 17.5 μm ±1.4 and equatorial axis size (E) varies from 22.2 μm ±1.8 to 13.1 μm ±0.9. Prominent apertures found consistently dispersed along the surface of pollen. Three kinds of ornamentation pattern were recorded, that is, reticulate or reticulate-perforate and perforate. The studied species display variation in equatorial and polar diameter, aperturation and sculpturing pattern, exine thickness, and pollen shape. On the basis of descriptive pollen features, a dichotomous taxonomic key and UPGMA analysis has been made for effortless and quick identification. The study concluded that disparities of the entire features are typically unrelenting and concerned with the species and shows potential systematic significance. The combination of palynological attributes in association with additional traits has prospective for systematic identification at species and genus level.

Microscopic techniques for fabrication of polyethersulfone thin-film nanocomposite membranes intercalated with UiO-66-SO3 H for heavy metal ions removal from water

Environmental remediation of heavy metals from wastewater is becoming popular area in the field of membrane technology. Heavy metals are toxic in nature and have ability to bioaccumulate in water bodies. In current study, zirconium-based metal organic frameworks (MOFs), that is, UiO-66 and UiO-66-SO₃ H with a mean diameter of 200 nm were synthesized and intercalated into polyethersulfone (PES) substrate to fabricate thin-film nanocomposite (TFN) membranes via an interfacial polymerization (IP) method. TFN membranes exhibit higher selectivity and permeability as compared to thin-film composite (TFC) membranes for heavy metals, such as cadmium (Cd) and mercury (Hg). Zirconium-based MOFs are highly stable in water and due to smaller pore size enhanced hydrophilicity of TFN membranes. In addition, TFN membrane with functionalized MOF (UiO-66-SO₃ H) performed best as compared to TFC and TFN with UiO-66 MOF. The effect of loading of different weight percentages (wt%) of both MOFs for TFN membranes was also investigated. The TFN membranes with loading (0.2 wt%) of UiO-66-SO₃ H displayed highest permeability of 9.57 LMH/bar and notable rejections of 90% and 87.7% toward Cd and Hg, respectively. To our best understanding, it is the first study of intercalating functionalized UiO-66-SO₃ H in TFC membranes by IP and their application on heavy metals especially Cd and Hg.

Palyno-morphological characterization of selected allergenic taxa of family Poaceae from Islamabad-Pakistan using microscopic techniques

Statistics around the world show an increased risk of high allergies associated with plants. The role of allergenic pollen is now well known. The most serious allergenic diseases are asthma and rhinitis, which affect 5-30% of the population of industrialized countries. This work focuses on the exploration of allergenic grass species of Islamabad, Pakistan and use microscopic techniques to correctly identify them. This study contains 11 species of grasses which showed variations in pollen morphological features. The dominant pollen shape was prolate, prolate-spheroidal and sub oblate. The largest polar diameter was calculated for Echinochloa crus-galli (56.00 μm) while the largest equatorial diameter was found in Cenchrus ciliaris (45.00 μm). Exine ornamentation varied from Gemmate-verrucate, Scabrate-reugulate, Verrucate-reticulate, Gemmate-Scabrate, Fine-Gemmate, Gemmate-rugulate, Gemmate-reticulate, Gemmate-scabrate, Scabrate-verrucate, and Scabrate. Maximum exine thickness was found in Eleusine indica (4.90 μm) while in C. ciliaris (1.50 μm) the minimum thickness of exine was measured. In E. crus-galli (1.54 μm), the largest P to E value was measured and the smallest value was noticed in Setaria verticillata (0.86 μm). The study was performed with an aim to identify the allergenic plant species in Islamabad-Pakistan using pollen morphological studies. This study provides significant information, to arrange the pollen types within their defined classes and to discuss various pollen features for developing an allergenic pollen atlas.

Morpho-palynological assessment of some species of family Asteraceae and Lamiaceae of District Bannu, Pakistan on the bases of light microscope & scanning electron microscopy

Pollen micro-morphological features have proven to be helpful for the plant taxonomists in the identification and classification of plants. The aim of this study was to evaluate the palynological features of family Asteraceae and Lamiaceae from flora of District Bannu, Khyber Pakhtunkhwa, Pakistan using both scanning electron microscopy (SEM) and light microscope (LM) for their taxonomic importance. Pollen of seven Asteraceous species belonging to four genera and four Lamiaceae species categorized into four genera were collected from different localities of research area. The present research work provides detailed information of diverse morpho-palynological characters both qualitatively and quantitatively including pollen shape, type, diameter, P/E ratio, exine sculpturing and thickness. Type of pollen in Asteraceae and Lamiaceae was ranged from tricolporate, tricolpate, trizonocolpate and hexazonocolpate. The maximum polar diameter (40.05 μm) and equatorial diameter (37.66 μm) was observed in the Ajuga bracteoosa while minimum polar and equatorial diameter was noted in Isodon rugosus (11.10 μm) and Erigeron canadensis (13.20 μm) respectively. Sculpturing of exine include; echinate, reticulate scabrate, aerolate, reticulate-verrucate, reticulate-scabrate, perforate and reticulate to perforate. Exine thickness was examined maximum 1.50 μm in Helianthus tuberosus, whereas minimum in Conyza Canadensis (0.16 μm). The pollen fertility was found highest in C Canadensis (83.33%) and lowest in Ajuga bracteosa (58.06%). The observed pollen morphology has many valuable qualitative and quantitative attributes for the better understanding of their taxonomy and play significant role in correct identification.

A Critical Cross-Species Comparison of Pollen from Nelumbo nucifera Gaertn. vs. Nymphaea lotus L. for Authentication of Thai Medicinal Herbal Tea

"Bau Luang" or Nelumbo nucifera Gaertn. is an aquatic medicinal herb that has been used as a component of traditional medicines, medicinal products, and herbal tea for good health, particularly in Asia. The stamen of N. nucifera is an important part of this medicinal plant that is used in the form of dried and/or powdered stamens for herbal tea as well as the main ingredient of some traditional remedies. However, there is another aquatic herb called "Bau Sai" or Nymphaea lotus L. that is distributed in similar locations. Living plants of these two aquatic species may be classified according to their morphology, but the dried and powdered stamens of these two medicinal species are difficult to distinguish. The major reason of adulteration is the higher price of Bau Luang stamen. As a result, various methods of authentication, such as pollen micromorphology evaluation using scanning electron microscopy (SEM) analysis, bioinformatics analysis of two nuclear and plastic DNA markers, phytochemical stamen profiling, and Fourier transform infrared (FTIR) analysis of stamen plant material authentication from Bau Luang and Bau Sai, have been used in this present research in order to avoid some adulteration and/or misuse between the dried stamens of Bau Luang and Bau Sai. These results showed that the micro-morphology of pollen (size of pollen grain, number of apertures, and surface ornamentation) from the SEM analysis, some phytochemical compounds and the FTIR sporopollenin-to-protein ratio signal analysis are potential tools for authentication and identification of these two medicinal plants from their dried-stamen materials. This model of investigation may also be used to distinguish dried plant material from other problematic plant groups.