Effects of high power ultrasound on the enzymolysis and structures of sweet potato starch

Impact of hydrodynamic cavitation-assisted microbubble with N2, CO2, and air on pasting, morphological, and thermal properties of starches from different botanical origins

Microbubble-assisted starch modification (MASM) using different gases (N2, CO2 and air) was employed to assess the effects of hydrodynamic cavitation (HC) on various botanical starches, including potato, wheat, corn and rice. SEM showed that N2- and CO2- microbubbles created more pronounced holes and cracks on the starch surfaces than air-microbubbles. The hydrodynamic cavitation-assisted microbubble (HCAM) treatment significantly reduced the amorphous and crystalline structures in potato and wheat starches, with less impact observed in corn and rice. This structural reduction was consistent with the observed decrease in the ratio 1047 /1022 cm- 1 after HCAM treatment. According to RVA, the increased viscosity of the starch samples following HCAM was consistent with their enhanced swelling power. The effect of MASM on starch structures decreased as N2-MASM > CO2-MASM > air-MASM, likely due to the microbubbles' higher stability and ζ potential. DSC indicated a significantly lower gelatinization temperature and enthalpy in HASM-treated samples, suggesting substantial disruption of the granular starch structures. The digestibility index depicted that rapidly digesting starch (RDS) enhanced after HCAM. Hydrodynamic cavitation demonstrates as considerable potential in modifying a variety of botanical starches, making it highly suitable for large-scale food industries. Additionally, it can enhance starch's functional properties in food and non-food products, broadening its application range.

Investigation of γ-polyglutamic acid production via asynchronous saccharification and fermentation of raw corn starch

Starch, a crucial raw material, has been extensively investigated for biotechnological applications. However, its application in γ-polyglutamic acid (γ-PGA) production remains unexplored. Based on γ-PGA output of Bacillus subtilis SCP010-1, a novel asynchronous saccharification and fermentation process for γ-PGA synthesis was implemented. The results revealed that a starch concentration of 20%, α-amylase dosage of 75 U/g, liquefaction temperature of 72℃, and γ-PGA yield of 36.31 g/L was achieved. At a glucoamylase dosage of 100 U/g, saccharification 38 h at 60℃, the yield of γ-PGA increased to 48.88 g/L. The contents of total sugar, glucose, maltose and oligosaccharide in saccharified liquid were determined. Through batch fermentation of saccharified liquid in fermentor, the γ-PGA output was elevated to 116.08 g/L. This study can offer a potential cost reduction of 40%, which can be a promising advancement in industrial γ-PGA production. Moreover, our approach can be applied in other starch-based fermentation industries.

Ultrasonication: An Efficient Alternative for the Physical Modification of Starches, Flours and Grains

Ultrasonic (USC) treatments have been applied to starches, flours and grains to modify their physicochemical properties and improve their industrial applicability. The extent of the modification caused by USC treatment depends on the treatment conditions and the natural characteristics of the treated matter. Cavitation leads to structural damage and fragmentation and partial depolymerization of starch components. The amorphous regions are more susceptible to being disrupted by ultrasonication, while the crystalline regions require extended USC exposure to be affected. The increased surface area in USC-treated samples has a higher interaction with water, resulting in modification of the swelling power, solubility, apparent viscosity, pasting properties and gel rheological and textural properties. Starch digestibility has been reported to be modified by ultrasonication to different extents depending on the power applied. The most important treatment variables leading to more pronounced modifications in USC treatments are the botanical origin of the treated matter, USC power, time, concentration and temperature. The interaction between these factors also has a significant impact on the damage caused by the treatment. The molecular rearrangement and destruction of starch structures occur simultaneously during the USC treatment and the final properties of the modified matrix will depend on the array of treatment parameters. This review summarizes the known effects of ultrasonic treatments in modifying starches, flours and grains.

Impact of ultrasound treatment on the structural modifications and functionality of carbohydrates - A review

Carbohydrates are crucial in food as essential biomolecules, serving as natural components, ingredients, or additives. Carbohydrates have numerous applications in the food industry as stabilizers, thickeners, sweeteners, and humectants. The properties and functionality of the carbohydrates undergo alterations when exposed to various thermal or non-thermal treatments. Ultrasonication is a non-thermal method that modifies the structural arrangement of carbohydrate molecules. These structural changes lead to enhanced gelling and viscous nature of the carbohydrates, thus enhancing their scope of application. Ultrasound may improve carbohydrate functionality in an environmentally sustainable way, leaving no chemical residues. The high-energy ultrasound treatments significantly reduce the molecular size of complex carbohydrates. Sonication parameters like treatment intensity, duration of treatment, and energy applied significantly affect the molecular size, depolymerization, viscosity, structural modifications, and functionality of carbohydrate biomolecules. This review provides a comprehensive analysis of ultrasound-assisted modifications in carbohydrates and the changes in functional properties induced by sonication.

Modification of Acorn Starch Structure and Properties by High Hydrostatic Pressure

Despite being rich in starch, over half of acorn production is undervalued. High hydrostatic pressure was used to modify the properties of Q. pyrenaica (0.1 and 460 MPa for 20 min) and Q. robur (0.1 and 333 MPa for 17.4 min) acorn starches to obtain high-valued ingredients. Pressure significantly altered the span distribution and heterogeneity of the acorn starch granules depending on the species, but their morphology was unaffected. Pressurization increased the amylose/amylopectin ratio and damaged starch contents, but the effect was more prominent in Q. pyrenaica than in Q. robur. However, the polymorphism, relative crystallinity, gelatinization temperatures, and enthalpies were preserved. The pressure effect on the starch properties depended on the property and species. The solubility, swelling power, and acorn gels' resistance towards deformation for both species decreased after pressurization. For Q. pyrenaica starch, the in vitro digestibility increased, but the pseudoplastic behavior decreased after pressurization. No differences were seen for Q. robur. Regarding the commercial starch, acorn starches had lower gelatinization temperatures and enthalpies, lower in vitro digestibility, lower resistance towards deformation, superior pseudoplastic behavior, and overall higher solubility and swelling power until 80 °C. This encourages the usage of acorn starches as a new food ingredient.

Combined effect of konjac glucomannan addition and ultrasound treatment on the physical and physicochemical properties of frozen dough

The effects of dual sequential modification using konjac glucomannan and ultrasound treatments at power densities of 15-37.5 W/L on the hydration, rheology and structural characteristics of frozen dough were investigated in this study. The results revealed that the konjac glucomannan and ultrasound treatments improved the textural properties of frozen dough, but had a negative impact on its viscoelasticity. Furthermore, konjac glucomannan and ultrasound treatments increased the content of free sulfhydryl group and disulfide bond, as well as improved the freeze tolerance of dough. The results exhibited that the enthalpy of frozen dough decreased by 20.42 % compared with the frozen blank control dough under ultrasonic power density of 22.5 W/L. The network structure of frozen dough treated by konjac glucomannan and ultrasound was more ordered and integral than that of frozen blank control dough. These results provide valuable knowledge on the application of konjac glucomannan and ultrasound to frozen wheat-based foods.

Designing liquefaction and saccharification processes of highly concentrated starch slurry: Challenges and recent advances

Starch-based sugars are an important group of starch derivatives used in food, medicine, chemistry, and other fields. The production of starch sugars involves starch liquefaction and saccharification processes. The production cost of starch sugars can be reduced by increasing the initial concentration of starch slurry. However, the usage of the highly concentrated starch slurry is characterized by challenges such as low reaction efficiency and poor product performance during the liquefaction and saccharification processes. In this study, we endeavored to provide a reference guide for improving high-concentration starch sugar production. Thus, we reviewed the effects of substrate concentration on the starch sugar production process and summarized several potential strategies. These regulation strategies, such as physical field pretreatment, complex enzyme-assisted, and temperature control, can significantly increase the starch concentration and mitigate the challenges of using highly concentrated starch slurry. We believe that highly concentrated starch sugar production will achieve a qualitative leap in the future. This review provides theoretical guidance and highlights the importance of high concentration in starch-based sugar production. Further studies are needed to explore the fine structure and enzyme attack mode during the liquefaction and saccharification processes to regulate the production of more targeted products.

Characterization of Arrowhead-Derived Type 3 Resistant Starch Prepared by Ultrasound-Assisted α-Amylase Degradation

The effect of ultrasonic-assisted α-amylase hydrolysis on the structure and physicochemical properties of arrowhead-derived type 3 resistant starch (RS3) was studied. After ultrasound treatment, the yield of resistant starch reached 17.21%, significantly ( $p<0.05$ ) increased by 65.64%. Compared with RS3 prepared by traditional enzymolysis (RS3-E), the crystal form and chemical bond of RS3 prepared by ultrasonic-assisted enzymolysis (RS3-UAE) did not change, but its gelatinization temperature, relative crystallinity, enthalpy, and 1047/1022 values were improved to varying degrees. RS3-UAE exhibited a higher solubility, transparency, water absorption capacity, and higher swelling power at 70°C. The analysis results of iodine absorption, differential scanning calorimetry, X-ray diffraction, Fourier transform-infrared spectroscopy, and scanning electron microscopy demonstrated that RS3-UAE exhibited a more regular shape, smoother surface, higher crystallinity, stable double helix structure, and more ordered and denser structure. Therefore, ultrasound-assisted enzymatic technology is an effective way to prepare RS3, and it can improve the functional and structural properties of the prepared RS3 to a certain extent.

Ultrasonic Processing of Food Waste to Generate Value-Added Products

Ultrasonic processing has a great potential to transform waste from the food and agriculture industry into value-added products. In this review article, we discuss the use of ultrasound for the valorisation of food and agricultural waste. Ultrasonic processing is considered a green technology as compared to the conventional chemical extraction/processing methods. The influence of ultrasound pre-treatment on the soluble chemical oxygen demand (SCOD), particle size, and cell wall content of food waste is first discussed. The use of ultrasonic processing to produce/extract bioactives such as oil, polyphenolic, polysaccharides, fatty acids, organic acids, protein, lipids, and enzymes is highlighted. Moreover, ultrasonic processing in bioenergy production from food waste such as green methane, hydrogen, biodiesel, and ethanol through anaerobic digestion is also reviewed. The conversion of waste oils into biofuels with the use of ultrasound is presented. The latest developments and future prospective on the use of ultrasound in developing energy-efficient methods to convert food and agricultural waste into value-added products are summarised.

Changes in structural, digestive, and rheological properties of corn, potato, and pea starches as influenced by different ultrasonic treatments

Ultrasound was widely used in starch modification, whereas there was no review focusing on the effects of different ultrasonic treatments on A-, B- and C-type starches. In this study, the effects of ultrasonic power (UP, 100-600 W) and ultrasonic time (UT, 5-35 min) on structural, digestibility and rheology of corn starch (CS), potato starch (PtS), and pea starch (PS) were investigated. As a result, UP and UT decreased the apparent amylose content of CS and PS, while increased the apparent amylose content of PtS. UP and UT enhanced R1047/1022 values of CS, whereas those of PtS and PS were decreased. Moreover, UP and UT decreased the gelatinization enthalpy of CS, PtS and PS. In vitro digestion revealed that UP and UT decreased the resistant starch content of PtS and PS, but increased the resistant starch content of CS. Rheological tests indicated that UP and UT decreased the flow behavior index of CS, PtS and PS pastes, and caused an increase in storage modulus and loss modulus. Results revealed that ultrasonic treatment represented a promising technology to obtain CS, PtS and PS with tailored digestibility and rheology, which allowed the texture and glycemic response of starch-based products to be adjusted.

Ultrasound, infrared and its assisted technology, a promising tool in physical food processing: A review of recent developments

Traditional food processing techniques can no longer meet the ever increasing demand for high quality food across the globe due to its low process efficiency, high energy consumption and low product yield. This review article is focused on the mechanism and application of Infrared (IR) and ultrasound (US) technologies in physical processing of food. We herein present the individual use of IR and US (both mono-frequency and multi-frequency levels) as well as IR and US supported with other thermal and non-thermal technologies to improve their food processing performance. IR and US are recent thermal and non-thermal technologies which have now been successfully used in food industries to solve the demerits of conventional processing technologies. These environmentally-friendly technologies are characterized by low energy consumption, reduced processing time, high mass-transfer rates, better nutrient retention, better product quality, less mechanical damage and improved shelf life. This work could be, with no doubt, useful to the scientific world and food industries by providing insights on recent advances in the use of US and IR technology, which can be applied to improve food processing technologies for better quality and safer products.

Isothermal and temperature-cycling retrogradation of high-amylose corn starch: Impact of sonication on its structural and retrogradation properties

In this study, the effects of sonication and temperature-cycled storage on the structural properties and resistant starch content of high-amylose corn starch were investigated. Sonication induced a partial depolymerization of the molecular structures of amylopectin and amylose. Sonication treatment induced the appropriate structural changes for retrogradation. Although the relative crystallinity of sonicated starch was lower than that of non-sonicated starch, sonicated starch after retrogradation showed much higher relative crystallinity than non-sonicated starch. Regardless of sonication treatment, temperature-cycled storage resulted in a higher degree of retrogradation than isothermal storage, but the rate of retrogradation was greater in sonicated starch than in non-sonicated starch, as supported by retrogradation enthalpy, the Avrami constant, and relative crystallinity. The highly developed crystalline structure in sonicated starches due to retrogradation was reflected by the large amount of resistant starch.