Rapid differentiation of Chinese hop varieties (Humulus lupulus) using volatile fingerprinting by HS-SPME-GC-MS combined with multivariate statistical analysis

Comprehensive Two-Dimensional Gas Chromatography-Mass Spectrometry as a Tool for the Untargeted Study of Hop and Their Metabolites

Since hop secondary metabolites have a direct correlation with the quality of beer and other hop-based beverages, and the volatile fraction of hop has a complex composition, requiring effective separation, here we explore the application of headspace solid-phase microextraction as a sample preparation method, coupled with comprehensive two-dimensional gas chromatography-mass spectrometry (GC×GC-MS) analysis. The methodology involved the use of a DVB/PDMS fibre with 500 mg of hop cone powder, extracted for 40 min at 50 °C, for both GC-MS and GC×GC-MS. The varieties Azacca, Cascade, Enigma, Loral, and Zappa were studied comprehensively. The results demonstrate that GC×GC-MS increases the number of peaks by over 300% compared to classical GC-MS. Overall, 137 compounds were identified or tentatively identified and categorised into 10 classes, representing between 87.6% and 96.9% of the total peak area. The composition revealed the highest concentration of sesquiterpene hydrocarbons for Enigma, whilst Zappa showed a relatively significant concentration of monoterpene hydrocarbons. Principal component analysis for all compounds and classes, along with hierarchical cluster analysis, indicated similarities between Zappa and Cascade, and Azacca and Loral. In conclusion, this method presents an optimistic advancement in hop metabolite studies with a simple and established sample preparation procedure in combination with an effective separation technique.

Analysis of odor compounds in Lee Kum Kee brand oyster sauce and oyster enzymatic hydrolysate: Comparison and relationship

Oyster sauce (OS) is a highly processed oyster product. However, the significant price difference between OS and fresh oysters raises a question: Does authentic OS truly contain components from oysters or oyster enzymatic hydrolysates (OEH)? Therefore, the odor compounds of Lee Kum Kee oyster sauce (LKK), 4 OEHs, and 6 other seafood enzymatic hydrolysates (SEHs) were analyzed by using solid-phase microextraction and gas chromatography-olfactometry-mass spectrometry technology (SPME-GC-O-MS). The results of multivariate statistical analysis demonstrated the effective discrimination between LKK and OEHs from other SEHs. According to the VIP value and the differences in the composition of odor compounds among different samples, 15 essential odor compounds were screened out, which could distinguish whether the samples contained OEHs. Among them, acetic acid, 2-pentylfuran, 2-ethyl furan, 2-methylbutanal, and nonanal were only detected in LKK and OEHs, which further indicated the existence of OEH in LKK.

Aroma characterisation of Liu-pao tea based on volatile fingerprint and aroma wheel using SBSE-GC-MS

Liu-pao tea (LPT) has unique aroma characteristics, and is a special microbial fermented tea produced using dark raw tea (LPM) as its raw material. In this study, stir bar sorptive extraction (SBSE) combined with gas chromatography-mass spectrometry (GC-MS) was applied to investigate the volatiles of 16 LPTs and 6 LPMs. Moreover, variations in volatile profiles between LPTs and LPMs were explored. Results showed that a total of 132 volatile compounds were identified from LPTs. The volatile fingerprint was constructed with a similarity ranged from 0.85 to 0.99. Furthermore, twenty-six aroma compounds were selected to depict the molecular aroma wheel of LPT. Multivariate statistical analysis revealed that the contents of 24 aroma compounds changed significantly (P < 0.05) when LPMs were processed into LPTs. These results reveal the volatile profiles of LPTs and aroma composition changes during microbial fermentation process, which might provide chemical basis of the aroma quality of LPT.

Industrial Multiple-Effect Fractional Condensation under Vacuum for the Recovery of Hop Terpene Fractions in Water

The inflorescences of Humulus lupulus L. are the most valuable ingredient in the brewing industry. Only female cones are used as their bitterness and aroma, much associated with beer, are granted by the production of resins and essential oils, respectively. The traditional brewing process for the extraction of the organic volatiles in hops is called dry hopping. It consists of extended maceration at low temperature after the fermentation phase. New extraction technologies can improve extraction rates and product quality while saving time and money. This article proves that multiple-effect fractional condensation under a vacuum is suitable for flavouring applications and especially for performing dry hopping without contamination risks and reductions in hop amounts. This technique leads to the recovery of aqueous aromatic fractions that are very rich in hop sesquiterpenes and monoterpenes. These suspensions are extremely stable when stored at 5-8 °C and avoid degradation even after several months. This feature is crucial for the marketing of non-alcoholic beverages, where the dilution of essential oils is otherwise problematic.

Basic sensory properties of essential oils from aromatic plants and their applications: a critical review

With higher standards in terms of diet and leisure enjoyment, spices and essential oils of aromatic plants (APEOs) are no longer confined to the food industry. The essential oils (EOs) produced from them are the active ingredients that contribute to different flavors. The multiple odor sensory properties and their taste characteristics of APEOs are responsible for their widespread use. The research on the flavor of APEOs is an evolving process attracting the attention among scientists in the past decades. For APEOs, which are used for a long time in the catering and leisure industries, it is necessary to analyze the components associated with the aromas and the tastes. It is important to identify the volatile components and assure quality of APEOs in order to expand their application. It is worth celebrating the different means by which the loss of flavor of APEOs can be retarded in practice. Unfortunately, relatively little research has been done on the structure and flavor mechanisms of APEOs. This also points the way to future research on APEOs.Therefore, this paper reviews the principles of flavor, identification of components and sensory pathways in humans for APEOs. Moreover, the article outlines the means of increasing the efficiency of using of APEOs. Finally, with respect to the sensory applications of APEOs, the review focuses on the practical application of APEOs in food sector and in aromatherapy.

Conventional and innovative extraction technologies to produce food-grade hop extracts: Influence on bitter acids content and volatile organic compounds profile

Hop extracts represent a natural alternative to synthetic food additives because of their high content of bitter acids and volatile organic compounds (VOCs) with bittering, flavoring, and antimicrobial properties. However, broader uses of hop extracts as natural techno-functional ingredients rely on the identification of sustainable and affordable extraction technologies allowing to diversify the processes and produce extracts characterized by different compositions and, consequently, qualitative properties. Thus, this study is aimed to evaluate and compare the effect of innovative and conventional extraction methods on the bitter acids content and VOCs pattern of food-grade ethanolic hop extracts for food applications. Innovative extractions were carried out by using two ultrasound systems (a laboratory bath [US] and a high-power ultrasound bath [HPUS]), and a high-pressure industrial process (high hydrostatic pressure [HHP]). Conventional extractions (CONV) were performed under dynamic maceration at 25 and 60°C; for ultrasound and conventional methods, the effect of the extraction time was also investigated. Among the extracts, the highest and lowest content of bitter acids was found in CONV 60°C extracts, and HHP and CONV 25°C extracts, respectively. Of the 34 VOCs identified in dry hops, ∼24 compounds were found in US, HPUS and CONV extracts, while only 18 were found in HHP. CONV extractions showed higher selectivity for sesquiterpenes, while US and HPUS showed higher selectivity for esters and monoterpenes. Hierarchical cluster analysis (HCA) and partial least squares-discriminant analysis (PLS-DA) allowed classifying hop extracts based on the extraction methods and also allowed highlighting the technological conditions to produce hop extracts with specific techno-functional and flavoring properties. PRACTICAL APPLICATION: The study showed that different extraction methods can lead to hop products with varying sensory and functional properties. By selecting the right extraction method, companies can produce hop extracts with specific compositions that meet their needs for clean label and sustainable food products, as well as new edible packaging or coatings.

Performance of alternative drying techniques on hop (Humulus lupulus L.) aroma quality: An HS-SPME-GC-MS-O and chemometrics combined approach

Economically feasible and effective hop drying strategies are urgently needed to respond to the increasing number of microbrewers in US. In this study, hops were dried by dehydrator-drying (52 °C), oven-drying (52 °C) and freeze-drying (25 °C) until the final moisture content reached 8-10%. Headspace solid-phase microextraction-gas chromatography-mass spectrometry-olfactometry (HS-SPME-GC-MS-O) was employed to analyze the aroma profiles in all dried hops. Methyl octanoate, β-myrcene, trans-α-bergamotene, linalool and geraniol were perceived as high-intensity aromas in all samples. Generally, dehydrator-dried hops contained the highest contents of aroma compounds among all groups, showing an increase of 5-23% and 6-37% when compared to freeze- and oven-dried hops, respectively. Principal component and hierarchical cluster analyses also revealed aroma content differences from three drying methods. Dehydrator drying at 52 °C was therefore considered as an alternative and promising drying approach for smaller-scale hop processing, which can largely benefit regional producers and local craft breweries.

Exploring the multisensory perception of terpene alcohol and sesquiterpene rich hop extracts in lager style beer

Understanding the contribution of hop essential oil to the multisensory profile of beer is known to be challenging because of its chemical and sensory complexity. Limited research has been conducted investigating hop-derived volatiles' role in the modulation of taste and mouthfeel sensations. Supercritical CO₂ can be used to extract specific fractions from hop oil, thereby enabling the localisation of compounds responsible for different sensory impressions. Terpene alcohol and sesquiterpene fractions were extracted from a Magnum hop oil and further fractionated into seven sub-fractions and individual compounds. All extracts were evaluated in lager (4.5% v/v) by a trained panel (n = 10) using a newly developed attribute lexicon and following a sensory descriptive analysis approach. The sensory data was analysed using ANOVA, followed by Tukey's test (HSD) and correlated with chemical profile data obtained by gas chromatography-mass spectrometry (GC-MS) by Principal Component Analysis. The study revealed evidence for hop extracts to impart multisensory characteristics to beer due to sensory interactions within and across modalities. The monoterpene alcohols-rich fractions and particularly geraniol, added fruity- and floral aromas and flavours, modified the sweetness and induced a smooth bitterness in the beer matrix. Flavouring the beer with sesquiterpene fractions resulted in a harsh bitterness sensation. Contrary to previous findings, the humulene epoxides fraction appeared to have limited effects on lingering bitterness and astringency, illustrating the need for temporal sensory assessments in future studies. This research shows that splitting hop oil into fractions and sub-fractions provides a source of natural, sustainable flavouring preparations with distinct sensory characteristics.

Aroma characterization of regional Cascade and Chinook hops (Humulus lupulus L.)

Aroma compounds in Cascade and Chinook hops harvested from multiple Virginia locations were identified by gas chromatography-mass spectrometry-olfactometry (GC-MS-O) and aroma extract dilution analysis (AEDA). Selected aroma compounds were quantitated by combination of stable isotope dilution analysis (SIDA) and standard addition method (SAM). A total of 33 aroma-active compounds were detected in five samples with β-myrcene, methyl octanoate, geraniol and linalool being the predominant compounds based on their high flavor dilution (FD) factors and odor activity values (OAVs). L-Calamenene and germacrene B was the major characteristic component unique to Cascade and Chinook variety, respectively. Principal component analysis (PCA) showed distinctive aroma profiles for all samples except for Blacksburg and Petersburg Cascade. Hierarchical cluster analysis (HCA) reflected the higher contents of most aroma-active compounds in Meadowview Cascade and Chinook when compared to their counterparts. The significant variations suggested the potential influences of environmental factors and agronomic practices on hop aroma quality.

Comparison of volatile compounds in different parts of fresh Amomum villosum Lour. from different geographical areas using cryogenic grinding combined HS-SPME-GC-MS

BACKGROUND

The essential oil is one of the main active ingredients of Amomum villosum Lour. However, volatile compounds are easily lost during the drying, storage and even sample preparation procedure. Therefore, using fresh samples can obtain more accurately data for qualitative and comparative analysis.

METHODS

In this study, the volatile compounds in different parts of fresh A. villosum from different origins were systemic analyzed and compared by using cryogenic grinding combined HS-SPME-GC-MS for the first time. GC-MS analyses were performed on a 6890 Series GC instrument coupled to a 5973 N mass spectrometer. The volatile compounds were extracted by the SPME fiber (100 μm PDMS). Analytes separation was achieved on a HP-5MS capillary column. The oven temperature was initially programmed at 70 °C, then raised 4 °C/min to reach 125 °C and then programmed at 0.5 °C/min to 133 °C, then at 6 °C/min to 170 °C and finally, at 20 °C/min to 280 °C held for 2 min. The temperatures of the injection port, ion source and transfer line were set at 250 °C, 230 °C and 280 °C, respectively.

RESULTS

Forty-eight main compounds were identified in different parts of fresh A. villosum. The most abundant components in fresh fruit samples were camphor (3.91%), bornyl acetate (10.53%), caryophyllene (8.70%), β-bisabolene (11.50%), (E)-nerolidol (14.82%) and cubenol (10.04%). This is quite different with that of dried samples analyzed in our previous work. As different parts of the same plant, many common components with biological activities were detected in fruit and other parts. In principle components analysis (PCA) and hierarchical clustering analysis (HCA), four parts of A. villosum were divided into different groups clearly. Additionally, fruit and root samples also could be divided into two subgroups (HCA) in accordance with their regions.

CONCLUSION

The developed method was successfully used for qualitative and comparative analysis of volatile compounds in fresh A. villosum samples. Additionally, using fresh samples can obtain much more information which is helpful for their performance in the fields of functional foods, agriculture and biomedical industry. Furthermore, our research is helpful for comprehensive utilization and quality control of A. villosum.

Structural characterization and osteogenic bioactivities of a novel Humulus lupulus polysaccharide

Humulus lupulus is a perennial climbing plant of the subfamily Cannabioideae native to the Northern Hemisphere. The primary use of H. lupulus is in the brewing industry, where it is an essential ingredient for imparting a unique flavor (bitterness and aroma) to beer. The female flowers of H. lupulus are also used in traditional Chinese medicine, but the biologically active ingredients underlying its benefits remain unclear. China is the largest producer and consumer of H. lupulus in Asia. Using the waste from the beer-brewing process of H. lupulus as raw materials, the biologically active polysaccharides can be screened. This is useful for the full utilization of H. lupulus, potentially leading to disease prevention and treatment. In this study, we isolated a homogeneous polysaccharide (HLP50-1) with a molecular weight of 49.13 kDa from female flowers of H. lupulus via a DEAE-Cellulose 52 anion exchange column and a Sephadex G-75 gel filtration column. Methylation, GC-MS, and NMR analyses revealed that the HLP50-1 comprised →4)-α-d-Glcp-(1→, →6)-α-d-Manp-(1→, →3)-α-l-Rhap-(1→, β-d-Glcp-(1→, α-l-Araf-(1→, →4,6)-2-OAc-β-d-Galp-(1→, β-d-Galp-(1→, →3,6)-β-d-Glcp-(1→, →2,3,4)-α-d-Xylp-(1→, →6)-α-d-Glcp-(1→, →3)-α-d-Galp-(1→, →4)-α-d-Galp-(1→. Advanced structural analysis showed that the HLP50-1 contained irregular fragments of different sizes and shapes with a smooth surface. The aggregates appeared be composed of accumulated crystals. Furthermore, the osteogenic activities of the HLP50-1 were evaluated via MC3T3-E1 cells in vitro. The results showed that 0.13 μM HLP50-1 led to outstanding proliferation, differentiation, and mineralization of the MC3T3-E1 cells. Therefore, HLP50-1 has osteogenic effects, and it may be a candidate for the treatment of osteoporosis. It has broad application prospects in functional foods, health-care products, and pharmaceuticals.

GC-MS Characterization of Volatile Flavor Compounds in Stinky Tofu Brine by Optimization of Headspace Solid-Phase Microextraction Conditions

This study optimized the headspace solid phase microextraction (HS-SPME) conditions for the analysis of the volatile flavor compounds of Chinese south stinky tofu brine by gas chromatography-mass spectrometry (GC-MS). The optimum HS-SPME conditions established were as follows: polar column CD-WAX, white 85 μm polyella extractor, extraction temperature 60 °C, equilibrium time 20 min, extraction time 40 min. Under these conditions, a total of 63 volatile flavor compounds in five stinky tofu brines were identified. The offensive odor of the stinky tofu may be derived from some of the volatile flavor compounds such as phenol, p-cresol, 3-methylindole, indole, acetic acid, propionic acid, isobutyric acid, n-butyric acid and 3-methylbutanoic acid. The volatile flavor substances data was examined by principal component analysis (PCA) to visualize the response patterns in the feature space of principal components (PC). PCA analysis results revealed that the Chengshifu brine (STB1) and Baise jingdian brine (STB4) are similar in PC 1, 2, and 3, and the two brines have a similar flavor. Results also indicate that the Huogongdian brine (STB2) and Wangcheng brine (STB3) can be grouped in the same class as they are similar in PC 3. However, PC 1, 2, and 3 of the Luojia brine (STB5) and other brands of brine are different as is the flavor.