Pulsed electric field and mild heating for milk processing: a review on recent advances

Pulsed electric field treatment for preservation of Chlorella suspensions and retention of gelling capacity

Pulsed electric field (PEF) processing has emerged as an alternative to thermal pasteurization for the shelf-life extension of heat-sensitive liquids at industrial scale. It offers the advantage of minimal alteration in physicochemical characteristics and functional properties. In this study, a pilot-scale continuous PEF processing (Toutlet < 55 °C) was applied to microalgae Chlorella vulgaris (Cv) suspensions (pH = 6.5), which was proposed as a functional ingredient for plant-based foods. Cv suspensions were inoculated with three distinct food spoilage microorganisms (Pseudomonas guariconensis, Enterobacter soli and Lactococcus lactis), isolated from the Cv biomass. PEF treatments were applied with varying electric field strength Eel of 16 to 28 kV/cm, pulse repetition rate f of 100 to 140 Hz, with a pulse width τ of 20 μs and an inlet product temperature Tin of 30 °C. The aim was to evaluate the PEF-induced microbial reduction and monitor the microbial outgrowth during a 10-day cold storage period (10 °C). Maximum inactivation of 4.1, 3.7 and 3.6 logs was achieved (28 kV/cm and 120 Hz) for the investigated isolates, respectively. Under these conditions, the critical electric field strengths Ecrit, above which inactivation was observed, ranged from 22.6 to 24.6 kV/cm. Moreover, repeated PEF treatment resulted in similar inactivation efficiency, indicating its potential to enhance shelf-life further.

Recent advances on erythorbyl fatty acid esters as multi-functional food emulsifiers

Over the past few decades, food scientists have investigated a wide range of emulsifiers to manufacture stable and safe emulsion-based food products. More recently, the development of emulsifiers with multi-functionality, which is the ability to have more than two functions, has been considered as a promising strategy for resolving rancidification and microbial contamination in emulsions. Erythorbyl fatty acid esters (EFEs) synthesized by enzymatic esterification of hydrophilic erythorbic acid and hydrophobic fatty acid have been proposed as multi-functional emulsifiers since they simultaneously exhibit amphiphilic, antioxidative, and antibacterial properties in both aqueous and emulsion systems. This review provides current knowledge about EFEs in terms of enzymatic synthesis and multi-functionality. All processes for synthesizing and identifying EFEs are discussed. Each functionality of EFEs and the proposed mechanism are described with analytical methodologies and experimental details. It would provide valuable insights into the development and application of a multi-functional emulsifier in food emulsion chemistry.

Bioactivity and volatile compound evaluation in sheep milk processed by ohmic heating

Ohmic heating may improve bioactive compounds and processing, ensuring food safety of beverages, liquid and pasty food, or liquid with solid pieces. Due to those traits, this study conducted a comparison between ohmic heating technology and conventional heating (CH), with a focus on assessing the impact of both methods on functional compounds (such as angiotensin-converting enzyme inhibition, α-amylase and α-glucosidase inhibition, and antioxidant activity) in both fresh and thawed raw sheep milk, which had been frozen for up to 3 mo. Different ohmic heating conditions were applied and compared to CH (3.33-8.33 V/cm vs. CH [73°C/15 s]). A total of 18 peptides with some functional activities were identified by MALDI-TOF mass spectrometry analysis. Ohmic heating samples presented the highest activities related to health, followed by CH and raw milk samples; antioxidant activity range was from 0.11% to 0.71%, antihypertensive activity ranged from 0.20% to 0.72%, and antidiabetic activity ranged from 0.21% to 0.79%. Of 51 volatile compounds detected, some were degraded by freezing, storing, and heating the sheep milk. This study showed for the first time that ohmic heating processing improved sheep milk bioactive peptides and preserved volatile compounds.

The Impact of Goat Milk Pretreatment with Pulsed Electric Fields on Cheese Quality

To reduce the microbial load in goat's milk, which is less thermally stable than cow's milk, an alternative processing method was used in this study. This involved treating the milk with pulsed electric fields (PEFs) (at 10 kV·cm-1, with 50 µs pulses for 3 Hz) and then heat-treating it at 63 °C for 6.0 s, as well as using heat treatment alone at 75 °C for 3.4 s. Cheeses were made using both types of milk treatment, and samples were collected after 5, 15, and 25 days of ripening for DNA extraction and purification, followed by high-throughput sequencing on the MiSeq Illumina sequencing platform. Analysis of the bacterial populations in the two types of cheese using various diversity indices revealed no significant differences in species richness and abundance, although there was a trend for the PEF-treated cheese to have a less diverse set of species with an uneven distribution of relative abundance. However, when examining the composition of the microbial communities in the two types of cheese using Weighted UniFrac analysis and Analysis of Similarities, there were significant differences in the presence and abundance of various species, which could have implications for the development of starter cultures. Concerning physicochemical properties (pH, aw, moisture content, total acidity and L, and a and b color parameters), the results also reveal that, generally, no significant differences were found, except for the color parameter, where cheeses treated with PEF demonstrated more whiteness (L) and yellowness (b) during ripening. Sensory scores for typicity (caprylic, goaty, and acetic) increased over time, but between treatments, only small differences were perceived by panellists in cheese with 5 days of ripening. Concerning texture firmness and cohesiveness, the PEF+HT samples presented lower values than the HT samples, even over storage time. In general, concerning quality parameters, similar behavior was observed between the treatments during the ripening period.

Implications of Pulsed Electric Field Pre-Treatment on Goat Milk Pasteurization

Goat milk is an interesting product from a nutritional and health standpoint, although its physico-chemical composition presents some technological challenges, mainly for being less stable than cow's milk at high temperatures. As pasteurization and ultra-high temperature processing are universally employed to ensure milk quality and safety, non-thermal methods, such as pulsed electric fields (PEFs), reduce the microbial load and eliminate pathogens, representing an interesting alternative for processing this product. This study demonstrates how the combined use of a PEF with short thermal processing and moderate temperature can be effective and energy-efficient in goat milk processing. A combination of thermal treatment at 63 °C after a low-intensity PEF (50 µs pulses, 3 Hz, and 10 kV·cm-1) caused the same reduction effect on the population of Listeria monocytogenes (goat's raw milk artificially spiked), as compared to a thermal treatment at 72 °C without a PEF. However, z values are significantly higher when PEF is used as a pre-treatment, suggesting that it may induce heat resistance in the survival population of L. monocytogenes. The sensitivity of L. monocytogenes to high temperatures is less pronounced in goat's milk than cow's milk, with a more pronounced impact of a PEF on lethality when combined with lower temperatures in goat's milk. The effect of a PEF on Escherichia coli viability was even more pronounced. It was also observed that thermal treatment energy needs with a PEF as a pre-treatment can be reduced by at least 50% of the total energy requirements.

A comprehensive review on infant formula: nutritional and functional constituents, recent trends in processing and its impact on infants' gut microbiota

Human milk is considered the most valuable form of nutrition for infants for their growth, development and function. So far, there are still some cases where feeding human milk is not feasible. As a result, the market for infant formula is widely increasing, and formula feeding become an alternative or substitute for breastfeeding. The nutritional value of the formula can be improved by adding functional bioactive compounds like probiotics, prebiotics, human milk oligosaccharides, vitamins, minerals, taurine, inositol, osteopontin, lactoferrin, gangliosides, carnitine etc. For processing of infant formula, diverse thermal and non-thermal technologies have been employed. Infant formula can be either in powdered form, which requires reconstitution with water or in ready-to-feed liquid form, among which powder form is readily available, shelf-stable and vastly marketed. Infants' gut microbiota is a complex ecosystem and the nutrient composition of infant formula is recognized to have a lasting effect on it. Likewise, the gut microbiota establishment closely parallels with host immune development and growth. Therefore, it must be contemplated as an important factor for consideration while developing formulas. In this review, we have focused on the formulation and manufacturing of safe and nutritious infant formula equivalent to human milk or aligning with the infant's needs and its ultimate impact on infants' gut microbiota.

Effect of the Application of Ultrasound to Homogenize Milk and the Subsequent Pasteurization by Pulsed Electric Field, High Hydrostatic Pressure, and Microwaves

The efficacy of applying ultrasound (US) as a system to homogenize emulsions has been widely demonstrated. However, research has not yet shown whether the effect achieved by homogenizing milk with US is modified by subsequent pasteurization treatments that use new processing technologies such as pulsed electric fields (PEF), microwaves (MW), and high hydrostatic pressure (HPP). The aim of this study was, therefore, to optimize the application of US for milk homogenization and to evaluate the effect of PEF, HPP, and MW pasteurization treatments on the sensorial, rheological, and microbiological properties of milk throughout its shelf life. To homogenize whole milk, a continuous US system (20 kHz, 0.204 kJ/mL, 100%, 40 °C) was used, and different ultrasonic intensities (0.25, 0.5, and 1.0 kJ/mL) were evaluated. The optimal ultrasonic treatment was selected on the basis of fat globule size distribution and pasteurization treatments by MW (5800 W, 1.8 L/min), PEF (120 kJ/kg, 20 kV/cm) and HPP (600 MPa, 2 min, 10 °C) was applied. The ultrasound intensity that achieved the highest reduction in fat globule size (0.22 ± 0.02 µm) and the most homogeneous distribution was 1.0 kJ/mL. Fat globule size was smaller than in commercial milk (82% of volume < 0.5 µm for US milk versus 97% of volume < 1.2 µm for commercial milk). That size was maintained after the application of the different pasteurization treatments, and the resulting milk had better emulsion stability than commercial milk. After 28 days of storage, no differences in viscosity (4.4–4.9 mPa s) were observed. HPP pasteurization had the greatest impact on color, leading to higher yellowness values than commercial milk. Microbial counts did not vary significantly after 28 days of storage, with counts below 102 CFU/mL for samples incubated at 15 °C and at 37 °C. In summary, the homogenization of milk obtained by US was not affected by subsequent pasteurization processes, regardless of the technology applied (MW, PEF, or HPP). Further research is needed to evaluate these procedures’ effect on milk’s nutritional and functional properties.

Pulsed Electric Field: Fundamentals and Effects on the Structural and Techno-Functional Properties of Dairy and Plant Proteins

Dairy and plant-based proteins are widely utilized in various food applications. Several techniques have been employed to improve the techno-functional properties of these proteins. Among them, pulsed electric field (PEF) technology has recently attracted considerable attention as a green technology to enhance the functional properties of food proteins. In this review, we briefly explain the fundamentals of PEF devices, their components, and pulse generation and discuss the impacts of PEF treatment on the structure of dairy and plant proteins. In addition, we cover the PEF-induced changes in the techno-functional properties of proteins (including solubility, gelling, emulsifying, and foaming properties). In this work, we also discuss the main challenges and the possible future trends of PEF applications in the food proteins industry. PEF treatments at high strengths could change the structure of proteins. The PEF treatment conditions markedly affect the treatment results with respect to proteins' structure and techno-functional properties. Moreover, increasing the electric field strength could enhance the emulsifying properties of proteins and protein-polysaccharide complexes. However, more research and academia-industry collaboration are recommended to build highly effective PEF devices with controlled processing conditions.

Non-thermal Processing Technologies for Dairy Products: Their Effect on Safety and Quality Characteristics

Thermal treatment has always been the processing method of choice for food treatment in order to make it safe for consumption and to extend its shelf life. Over the past years non-thermal processing technologies are gaining momentum and they have been utilized especially as technological advancements have made upscaling and continuous treatment possible. Additionally, non-thermal treatments are usually environmentally friendly and energy-efficient, hence sustainable. On the other hand, challenges exist; initial cost of some non-thermal processes is high, the microbial inactivation needs to be continuously assessed and verified, application to both to solid and liquid foods is not always available, some organoleptic characteristics might be affected. The combination of thermal and non-thermal processing methods that will produce safe foods with minimal effect on nutrients and quality characteristics, while improving the environmental/energy fingerprint might be more plausible.

Thermal treatment alternatives for enzymes inactivation in fruit juices: Recent breakthroughs and advancements

Fruit juices (FJs) are frequently taken owing to their nutritious benefits, appealing flavour, and vibrant colour. The colours of the FJs are critical indicators of the qualitative features that influence the consumer's attention. Although FJs' intrinsic acidity serves as a barrier to bacterial growth, their enzymatic stability remains an issue for their shelf life. Inactivation of enzymes is critical during FJ processing, and selective inactivation is the primary focus of enzyme inactivation. The merchants, on the other hand, want the FJs to stay stable. The most prevalent technique of processing FJ is by conventional heat treatment, which degrades its nutritive value and appearance. The FJ processing industry has undergone a dramatic transformation from thermal treatments to nonthermal treatments (NTTs) during the past two decades to meet the requirements for microbiological and enzymatic stability. The manufacturers want safe and stable FJs, while buyers want high-quality FJs. According to the past investigation, NTTs have the potential to manufacture microbiologically safe and enzymatically stable FJs with low loss of bioactive components. Furthermore, it has been demonstrated that different NTTs combined with or without other NTTs or mild heating as a hurdle technology increase the synergistic effect for microbiological safety and stability of FJs. Concise information about the variables that affect NTTs' action mode has also been addressed. Primary inactivates enzymes by modifying the protein structure and active site conformation. NTTs may increase enzyme activity depending on the nature of the enzyme contained in FJs, the applied pressure, pH, temperature, and treatment period. This is due to the release of membrane-bound enzymes as well as changes in protein structure and active sites that allow substrate interaction. Additionally, the combination of several NTTs as a hurdle technology, as well as temperature and treatment periods, resulted in increased enzyme inactivation in FJs. Therefore, a combination of thermal and non-thermal technologies is suggested to increase the effectiveness of the process as well as preserve the juice quality.

Synergistic inactivation of Listeria and E. coli using a combination of erythorbyl laurate and mild heating and its application in decontamination of peas as a model fresh produce

We investigated the synergistic antimicrobial activity of erythorbyl laurate (EL) and mild heating co-treatment on the Gram-positive Listeria innocua and Gram-negative Escherichia coli O157:H7 bacteria. EL (2 mM) and mild heating (55 °C for 3 min) resulted in 3.1 and 0.5 log colony forming units (CFU)/mL reductions in the number of L. innocua, respectively, compared to a 6.4 log CFU/mL reduction induced by the combined treatment of EL and mild heating in saline. EL (10 mM) and mild heating (55 °C for 3 min) resulted in 1.3 and 0.7 log CFU/mL reductions in the number of E. coli O157:H7, respectively, compared to a 6.2 log CFU/mL reduction with the combined treatment in saline. EL, a membrane-active compound, showed a strong synergistic effect with mild heating, possibly due to enhanced disruption of the bacterial cell membrane. The synergistic antibacterial effect was evaluated using inoculated English peas (Pisum sativum) and this combined treatment (2 mM EL and mild heating against L. innocua and 10 mM EL and mild heating against E. coli O157:H7) resulted in more than 7 log reductions in the numbers of L. innocua and E. coli O157:H7, inoculated on the surface of fresh peas. The treatments did not show significant difference in the color or texture of treated peas compared to the non-treated controls. This is the first report illustrating synergistic activity of EL and mild heating for both the gram positive (L. innocua) and the gram negative (E. coli O157:H7) bacteria on food. Overall, this research will illustrate the development of more effective and rapid antibacterial surface disinfection method for application in the processing of minimally processed foods.

Current insights into non-thermal preservation technologies alternative to conventional high-temperature short-time pasteurization of drinking milk

Milk is an important nutritional food source characterized by a perishable nature and conventionally thermally treated to guarantee its safety. In recent years, an increasing focus on competing non-thermal food processing technologies has been driven mainly by consumers' expectations for minimally processed products. Due to the heat sensitivity of milk, much research interest has been addressed to mild non-thermal pasteurization processing to keep safety, 'fresh-like' taste and to maintain the organoleptic qualities of raw milk. This review provides an overview of the current literature on non-thermal treatments as standalone alternative technologies to high-temperature short-time (HTST) pasteurization of drinking milk. Results of lab-scale experimentations suggest the feasibility of most emerging non-thermal processing technologies, including high hydrostatic pressure, pulsed electric field, cold plasma, cavitation and light-based technologies, as alternative to thermal treatment of drinking milk with premium in shelf life duration. Nevertheless, a series of regulatory, technological and economical hurdles hinder the industrial scaling-up for most of these substitutes. To date, only high hydrostatic pressure treatments are applied as alone alternative to HTSH pasteurization for processing of "cold pasteurized" drinking milk. Milk submitted to HTST treatment combined to ultraviolet light is currently accepted in EU countries as novel food.

Strategies to increase the shelf life of meat and meat products with phenolic compounds

Oxidative reactions and microbial growth are the main processes involved in the loss of quality in meat products. Although the use of additives to improve the shelf life is a common practice in the meat industry, the current trends among consumers are pushing the researchers and professionals of the meat industry to reformulate meat products. Polyphenols are compounds with antioxidant and antimicrobial activity naturally found in several plants, fruits, and vegetables that can be used in the production of extracts and components in active packaging to improve the shelf life of meat products. This chapter aims to discuss the advances in terms of (1) encapsulation techniques to protect phenolic compounds; (2) production of active and edible packages rich on phenolic compounds; (3) use of phenolic-rich additives (free or encapsulated form) with non-thermal technologies to improve the shelf life of meat products; and (4) use of active packaging rich on phenolic compounds on meat products. Innovative strategies to encapsulated polyphenols and produce films are mainly centered in the use of innovative and emerging technologies (such as ultrasound and supercritical fluids). Moreover, the combined use of polyphenols and non-thermal technologies is a relevant approach to improve the shelf life of meat products, especially using high pressure processing. In terms of application of innovative films, nanomaterials have been largely explored and indicated as relevant strategy to preserve meat and meat products.

Revisiting Non-Thermal Food Processing and Preservation Methods-Action Mechanisms, Pros and Cons: A Technological Update (2016-2021)

The push for non-thermal food processing methods has emerged due to the challenges associated with thermal food processing methods, for instance, high operational costs and alteration of food nutrient components. Non-thermal food processing involves methods where the food materials receive microbiological inactivation without or with little direct application of heat. Besides being well established in scientific literature, research into non-thermal food processing technologies are constantly on the rise as applied to a wide range of food products. Due to such remarkable progress by scientists and researchers, there is need for continuous synthesis of relevant scientific literature for the benefit of all actors in the agro-food value chain, most importantly the food processors, and to supplement existing information. This review, therefore, aimed to provide a technological update on some selected non-thermal food processing methods specifically focused on their operational mechanisms, their effectiveness in preserving various kinds of foods, as revealed by their pros (merits) and cons (demerits). Specifically, pulsed electric field, pulsed light, ultraviolet radiation, high-pressure processing, non-thermal (cold) plasma, ozone treatment, ionizing radiation, and ultrasound were considered. What defines these techniques, their ability to exhibit limited changes in the sensory attributes of food, retain the food nutrient contents, ensure food safety, extend shelf-life, and being eco-friendly were highlighted. Rationalizing the process mechanisms about these specific non-thermal technologies alongside consumer education can help raise awareness prior to any design considerations, improvement of cost-effectiveness, and scaling-up their capacity for industrial-level applications.

Improvements of plant protein functionalities by Maillard conjugation and Maillard reaction products

Plant-derived protein research has gained attention in recent years due to the rise of health concerns, allergenicity, trends toward vegan diet, food safety, and sustainability; but the lower techno-functional attributes of plant proteins compared to those of animals still remain a challenge for their utilization. Maillard conjugation is a protein side-chain modification reaction which is spontaneous, and do not require additional chemical additive to initiate the reaction. The glycoconjugates formed during the reaction significantly improves the thermal stability and pH sensitivity of proteins. The modification of plant-derived protein using Maillard conjugation requires a comprehensive understanding of the influence of process conditions on the conjugation process. These factors can be used to establish a correlation with different functional and bioactive characteristics, to potentially adapt this approach for selective functionality enhancement and nutraceutical development. This review covers recent advances in plant-derived protein modification using Maillard conjugation, including different pretreatments to modify the functionality and bioactivity of plant proteins and their potential uses in practice. An overview of different properties of conjugates and MRPs, including food safety aspects, is given.

An Integrated Approach for the Valorization of Cheese Whey

Taking into account the large amount of whey that is produced during the cheese production process and the constant demand by society for more sustainable processes, in accordance with Sustainable Development Goals (SDGs) and the circular economy concept, it is necessary to adapt two-unit operations into a single process, allowing us to not only valorize a part of the whey but the whole process, which is known as bioprocess integration. In this sense, the adaptation of different processes, for example, physicochemical (micro, ultra and nanofiltration) and fermentation, that are commonly used to obtain proteins, lactose and other compounds with different activities (antioxidant, antifungal, etc.) could be integrated to achieve a complete recovery of the cheese whey. Likewise, keeping in mind that one of the main drawbacks of cheese whey is the great microbial load, some innovative processing technologies, such as high hydrostatic pressures, electrotechnologies and ultrasound, can allow both the development of new foods from whey as well as the improvement of the nutritional and organoleptic properties of the final products prepared with cheese, and thus reducing the microbial load and obtaining a safe product could be incorporated in the cheese whey valorization process.

Pulsed electric field: An emerging pretreatment technology in a biogas production

This review focuses on current status of pulsed electric field (PEF) technology and its implementation in biogas production. First, basic principles of PEF and a schematic overview of typical PEF processing system were provided. Thereafter, lab- and pilot-scale PEF pretreatments of sludge with subsequent anaerobic digestion (AD) were provided. Furthermore, PEF technology, as an emerging technology for the lignocellulose (LC) pretreatment in biogas production which is still predominantly used at lab-scale, was outlined. Eventually, conclusion together with future perspectives and challenges were outlined.

Serological detection of brucellosis among febrile, malaria-negative children and domesticated dogs in an urban African setting

Background

Childhood brucellosis and malaria are co-endemic febrile illnesses in some sub-Saharan African countries. Malaria and brucellosis co-infection or brucellosis sole infections are often missed due to an over emphasis on malaria and the lack of appropriate diagnostic infrastructure. Brucellosis in dogs is usually overlooked and yet there is extensive contact between humans and their pets.

Objective

This study investigated brucellosis in children and dogs using a confirmatory serological testing series that screens for three Brucella sp.

Methods

Residual blood samples from malaria smear-negative febrile children were collected and tested for Brucella sp and malaria parasite. During the same period, residual blood samples presented to a veterinary microbiology laboratory in the same area were tested for brucellosis using the same approach.

Results

A total of 105 human and 80 canine blood samples were tested for brucellosis antibodies. The seroprevalence of brucellosis was 22.86% (25/105) in children and 1.3% (1/80) in dogs using the Card, buffered acidified plate antigen, and standard plate agglutination tests but was 0% using the rivanol precipitation plate agglutination test.

Conclusion

Given that brucellosis can be caused by both smooth and rough colony strains, there is a need to modify the current serological surveillance strategy (targeted at only Brucella abortus and other smooth colony Brucella strains) to figure out the relative contribution of rough colony Brucella strains (B. ovis and B. canis). Since Uganda is endemic for brucellosis there is a need to modify the brucellosis surveillance strategy.

High-Pressure Carbon Dioxide Used for Pasteurization in Food Industry

The demand for safe, high-quality food has greatly increased, in recent times. As traditional thermal pasteurization can significantly impact the nutritional value and the color of fresh food, an increasing number of nonthermal pasteurization technologies have attracted attention. The bactericidal effect of high-pressure carbon dioxide has been known for many years, and its effect on food-related enzymes has been studied. This novel technology has many merits, owing to its use of relatively low pressures and temperatures, which make it a potentially valuable future method for nonthermal pasteurization. For example, the inactivation of polyphenol oxidase can be achieved with relatively low temperature and pressure, and this can contribute to food quality and better preserve nutrients, such as vitamin C. However, this novel technology has yet to be developed on an industrial scale due to insufficient test data. In order to support the further development of this application, on an industrial scale, we have reviewed the existing information on high-pressure carbon dioxide pasteurization technology. We include its bactericidal effects and its influence on food quality. We also pave the way for future studies, by highlighting key areas.