Some advantages of high temperature for the separation of pharmaceutical compounds with mass spectrometry detection

High-temperature ultrafast ChipHPLC-MS

Herein, we present a miniaturized chip-based HPLC approach coupled to electrospray ionization mass spectrometry utilizing temperature to achieve high-speed separations. The approach benefits from the low thermal mass of the microfluidic chip and can form an electrospray from the pre-heated mobile phase. With the help of this technology, isothermal and temperature-programmable operations up to 130°C were pursued to perform reversed-phase separations of pesticides in methanol and ethanol-containing eluents in less than 20 s.

Determination of the alcohol biomarker phosphatidylethanol 16:0/18:1 and 33 compounds from eight different drug classes in whole blood by LC-MS/MS

INTRODUCTION

Most bioanalytical LC-MS/MS methods are developed for determination of single drugs or classes of drugs, but a multi-compound LC-MS/MS method that can replace several methods could reduce both analysis time and costs. The aim of this study was to develop a high-throughput LC-MS/MS method for determination of the alcohol biomarker phosphatidylethanol 16:0/18:1 (PEth 16:0/18:1) and 33 other compounds from eight different drug classes in whole blood.

METHODS

Whole-blood samples were prepared by 96-well supported liquid extraction (SLE). Chromatographic separations were performed on a biphenyl core shell column with a mobile phase consisting of 10 mM ammonium formate, pH 3.1 and methanol. Each extract was analyzed twice by LC-MS/MS, injecting 0.4 μL and 2 μL, in order to obtain narrow and symmetrical peaks and good sensitivity for all compounds. Stable isotope-labeled internal standards were used for 31 of the 34 compounds.

RESULTS

A 96-well SLE reversed phase LC-MS/MS method for determination of PEth 16:0/18:1 and 33 other compounds from eight different drug classes was developed and validated. By using an organic solvent mixture of isopropanol/ methyl tert-butyl ether (1:5, v:v), all compounds, including the polar and ampholytic compounds pregabalin, gabapentin and benzoylecgonine, was extracted by 96-well SLE.

DISCUSSION/CONCLUSION

For the first time an LC-MS/MS method for the determination of alcohol biomarker PEth 16:0/18:1 and drugs and metabolites from several different drug classes was developed and validated. The developed LC-MS/MS method can be used for high-throughput analyses and sensitive determinations of the 34 compounds in whole blood.

Use of high-pH (basic/alkaline) mobile phases for LC-MS or LC-MS/MS bioanalysis

High-pH or basic/alkaline mobile phases are not commonly used in LC-MS or LC-MS/MS bioanalysis because of the deeply rooted concern with column instability and reduced detection sensitivity for basic compounds in high-pH mobile phases owing to charge neutralization. With the advancement of LC column technology and the wide recognition of the "wrong-way-round" phenomena, high-pH mobile phases are more and more used in LC-MS or LC-MS/MS bioanalysis to improve chromatographic peak shape, retention, selectivity, resolution, and detection sensitivity, not only for basic compounds, but also for many other compounds. In this article, the benefits, practical considerations, application examples and cautions for using high-pH mobile phases in LC-MS or LC-MS/MS bioanalysis are reviewed, with a focus on quantification. Furthermore, the future trends in this field are also envisaged. A total of 84 references are cited in this review.

Silica, hybrid silica, hydride silica and non-silica stationary phases for liquid chromatography

Free silanols on the surface of silica are the "villains", which are responsible for detrimental interactions of those compounds and the stationary phase (i.e., bad peak shape, low efficiency) as well as low thermal and chemical stability. For these reasons, we began this review describing new silica and hybrid silica stationary phases, which have reduced and/or shielded silanols. At present, in liquid chromatography for the majority of analyses, reversed-phase liquid chromatography is the separation mode of choice. However, the needs for increased selectivity and increased retention of hydrophilic bases have substantially increased the interest in hydrophilic interaction chromatography (HILIC). Therefore, stationary phases and this mode of separation are discussed. Then, non-silica stationary phases (i.e., zirconium oxide, titanium oxide, alumina and porous graphitized carbon), which afford increased thermal and chemical stability and also selectivity different from those obtained with silica and hybrid silica, are discussed. In addition, the use of these materials in HILIC is also reviewed.

Clinical applications of fast liquid chromatography: a review on the analysis of cardiovascular drugs and their metabolites

One of the major challenges facing the medicine today is developing new therapies that enhance human health. To help address these challenges the utilization of analytical technologies and high-throughput automated platforms has been employed; in order to perform more experiments in a shorter time frame with increased data quality. In the last decade various analytical strategies have been established to enhance separation speed and efficiency in liquid chromatography applications. Liquid chromatography is an increasingly important tool for monitoring drugs and their metabolites. Furthermore, liquid chromatography has played an important role in pharmacokinetics and metabolism studies at these drug development stages since its introduction. This paper provides an overview of current trends in fast chromatography for the analysis of cardiovascular drugs and their metabolites in clinical applications. Current trends in fast liquid chromatographic separations involve monolith technologies, fused-core columns, high-temperature liquid chromatography (HTLC) and ultra-high performance liquid chromatography (UHPLC). The high specificity in combination with high sensitivity makes it an attractive complementary method to traditional methodology used for routine applications. The practical aspects of, recent developments in and the present status of fast chromatography for the analysis of biological fluids for therapeutic drug and metabolite monitoring, pharmacokinetic studies and bioequivalence studies are presented.

¹³C labelled internal standards--a solution to minimize ion suppression effects in liquid chromatography-tandem mass spectrometry analyses of drugs in biological samples?

Liquid chromatography-tandem mass spectrometry (LC-MS/MS) is frequently used to identify and quantify drugs in human biological samples due to the high selectivity and sensitivity of this technique. However, ion suppression effects caused by co-eluting compounds: drugs, metabolites, matrix components, impurities and degradation products, are a major concern. Stable isotope labelled internal standards (SIL ISs), usually deuterium ((2)H) labelled, are often used to compensate for these effects. In many LC separations the retention times of (2)H labelled ISs and their analogues will differ. Ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) is increasingly being used for bio-analysis. With the better chromatographic resolution provided with sub 2 μm particles, larger separation between analytes and their (2)H labelled analogues can be expected, which might reduce the benefits of the SIL IS. There is a greater difference in physico-chemical properties between hydrogen isotopes than between isotopes of other elements. (13)C, (15)N and (18)O labelled ISs are more similar to their analytes than (2)H labelled ISs and thereby expected to behave more similarly in chromatographic separations. In this study we have investigated the use of (13)C and (2)H labelled ISs for the determination of amphetamine and methamphetamine by UPLC-MS/MS. The (13)C labelled ISs were co eluting with their analytes under different chromatographic conditions while the (2)H labelled ISs and their analytes were slightly separated. An improved ability to compensate for ion suppression effects were observed when the (13)C labelled ISs were used. Furthermore, an UPLC-MS/MS method for determination of amphetamine and methamphetamine in urine using (13)C labelled ISs has been developed and validated. Unfortunately, there are few (13)C labelled ISs commercial available today. If more (13)C labelled ISs become commercial available they may well be the coming solution to minimize ion suppression/enhancement effects in LC-MS/MS analyses of drugs in biological samples.

Use of the kinetic plot method to analyze commercial high-temperature liquid chromatography systems

The present study aimed at mapping the separation speed potential of a critical pair on commercial high-temperature HPLC (HT-HPLC) supports at elevated temperatures. For this purpose, band broadening and pressure drop measurements were conducted on three different commercial HT-HPLC columns operated at various elevated temperatures but by keeping the same retention factor. The plate height data were subsequently transformed into a plot showing the minimal required analysis time needed to yield a given required effective plate number. For the considered RPLC alkylbenzene separations, it was found that the maximal gain in separation speed of the critical pair that can be obtained by varying the operating temperature from T=30 to 120 degrees C can be expected to be of the order of a factor of 3-4, if using an individually optimized column length for each considered temperature and if no secondary adsorption effects occur at the lower temperature. This gain factor, remaining more or less constant over the most relevant range of plate numbers, largely paralleled the reduction of the mobile phase viscosity accompanying the temperature increase.

Elevated temperature and temperature programming in conventional liquid chromatography – fundamentals and applications

Temperature, as a powerful variable in conventional LC is discussed from a fundamental point of view and illustrated with applications from the author's laboratory. Emphasis is given to the influence of temperature on speed, selectivity, efficiency, detectability, and mobile phase composition (green chromatography). The problems accompanying the use of elevated temperature and temperature programming in LC are reviewed and solutions are described. The available stationary phases for high temperature operation are summarized and a brief overview of recent applications reported in the literature is given.