Molecularly imprinted solid-phase extraction coupled with ultra high performance liquid chromatography and fluorescence detection for the determination of estrogens and their metabolites in wastewater

High Performance Liquid Chromatography (HPLC) with Fluorescence Detection for Quantification of Steroids in Clinical, Pharmaceutical, and Environmental Samples: A Review

Steroids are compounds widely available in nature and synthesized for therapeutic and medical purposes. Although several analytical techniques are available for the quantification of steroids, their analysis is challenging due to their low levels and complex matrices of the samples. The efficiency and quick separation of the HPLC combined with the sensitivity, selectivity, simplicity, and cost-efficiency of fluorescence, make HPLC coupled to fluorescence detection (HPLC-FLD) an ideal tool for routine measurement and detection of steroids. In this review, we covered HPLC-FLD methods reported in the literature for the steroids quantification in clinical, pharmaceutical, and environmental applications, focusing on the various approaches of fluorescent derivatization. The aspects related to analytical methodology including sample preparation, derivatization reagents, and chromatographic conditions will be discussed.

Endocrine disruptors of sex hormone activities

Sex hormones, such as androgens, estrogens and progestins are naturally occurring compounds that tightly regulate endocrine systems in a variety of living organisms. Uncontrolled environmental exposure to these hormones or their biological and synthetic mimetics has been widely documented. Furthermore, water contaminants penetrate soil to affect flora, fauna and ultimately humans. Because endocrine systems evolved to respond to very small changes in hormone levels, the low levels found in the environment cannot be ignored. The combined actions of sex hormones with glucocorticoids and other nuclear receptors disruptors creates additional level of complexity including the newly described "dynamic assisted loading" mechanism. We reviewed the extensive literature pertaining to world-wide detection of these disruptors and created a detailed Table on the development and current status of methods used for their analysis.

Recent Advances in Solid-Phase Extraction (SPE) Based on Molecularly Imprinted Polymers (MIPs) for Analysis of Hormones

Steroid hormones are active substances that are necessary in the normal functioning of all physiological activities in the body, such as sexual characteristics, metabolism, and mood control. They are also widely used as exogenous chemicals in medical and pharmaceutical applications as treatments and at times growth promoters in animal farming. The vast application of steroid hormones has resulted in them being found in different matrices, such as food, environmental, and biological samples. The presence of hormones in such matrices means that they can easily come into contact with humans and animals as exogenous compounds, resulting in abnormal concentrations that can lead to endocrine disruption. This makes their determination in different matrices a vital part of pollutant management and control. Although advances in analytical instruments are constant, it has been determined that these instruments still require some sample preparation steps to be able to determine the occurrence of pollutants in the complex matrices in which they occur. Advances are still being made in sample preparation to ensure easier, selective, and sensitive analysis of complex matrices. Molecularly imprinted polymers (MIPs) have been termed as advanced solid-phase (SPE) materials for the selective extraction and preconcentration of hormones in complex matrices. This review explores the preparation and application of MIPs for the determination of steroid hormones in different sample types.

Sample Preparation and Analytical Methods for Steroid Hormones in Environmental and Food Samples: An Update Since 2012

Steroid hormones (SHs) have been widely used over the past few decades as both human and veterinary drugs to prevent or treat infectious diseases and anti-inflammatory benefits in clinical. Unfortunately, their residues in foodstuffs and environmental samples can produce adverse effects on human and animal life such as disrupting the endocrine system. For these reasons, sensitive, simple and efficient methods have been developed for the determination of these compounds in various matrices. This critical review summarized the articles published in the period from 2012 to 2019 and can be used to help researchers to understand development of the sample pretreatment protocols and analytical methods used to detect SHs. The developed extraction and purification techniques used for steroids in different samples, such as cloud point extraction, solid phase extraction based on different novel materials, microextraction methods, QuEChERS and other methods are summarized and discussed. Analytical methods used to quantify these compounds, such as different chromatography methods, electrochemical methods, as well as other methods, are illustrated and compared. We focused on the latest advances in SHs pretreatment, and the application of new technologies in SHs analysis.

Recent advances and applications of molecularly imprinted polymers in solid-phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.

Efficient extraction of estrogen receptor-active compounds from environmental surface water via a receptor-mimic adsorbent, a hydrophilic PEG-based molecularly imprinted polymer

We report an efficient screening procedure for the selective detection of compounds that are actively bound to estrogen receptor (ER) from environmental water samples using a receptor-mimic adsorbent prepared by a molecularly imprinted polymer (MIP). To mimic the recognition ability of ER, we improved the typical MIP preparation procedure using a hydrophilic matrix with a polyethylene glycol (PEG)-based crosslinker and a hydrophobic monomer to imitate the hydrophobic pocket of ER. An optimized MIP prepared with methacrylic acid as an additional functional monomer and estriol (E3), an analogue of 17β-estradiol (E2), exhibited highly selective adsorption for ER-active compounds such as E2 and E3, with significant suppression of non-specific hydrophobic adsorption. The prepared MIP was then applied to the screening of ER-active compounds in sewage samples. The fraction concentrated by the MIP was evaluated by in vitro bioassay using the yeast two-hybrid (Y2H) method and liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-Q-TOFMS). Compared to an authentic adsorbent, styrene-divinylbenzene (SDB)-based resin, the fraction concentrated by the MIP had 120% ER activity in the Y2H assay, and only 25% peak volume was detected in LC-Q-TOFMS. Furthermore, a few ER-active compounds were identified only from the fraction concentrated by the MIP, although they could not be determined in the fraction concentrated by the SDB-based resin due to ion suppression along with high levels of hydrophobic compounds. These results indicated that the newly developed MIP effectively captured ER-active compounds and while allowing most non-ER-active compounds to pass through.

Estrogenic activity in Finnish municipal wastewater effluents

Effluents from wastewater treatment plants (WWTPs) are a major source of estrogenic compounds to the aquatic environment. In the present work, estrogenic activities of effluents from eight municipal WWTPs in Finland were studied. The main objectives of the study were to quantify the concentrations of selected estrogenic compounds, to evaluate their contribution to estrogenic potency and to test the feasibility of the commercial bioassays for wastewater analysis. The effluent samples were analyzed by two in vitro tests, i.e. ERα-CALUX(®) and ELISA-E2, and by liquid chromatography mass spectrometry for six estrogenic compounds: estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinylestradiol (EE2), 17α-estradiol and bisphenol A (BPA). Estrogenic effects were found in all of the effluent samples with both of the bioassays. The concentrations measured with ELISA-E2 (8.6-61.6 ng/L) were clearly higher but exhibited a similar pattern than those with chemical analysis (E2 <limit of quantification - 6.8 ng/L) and ERα-CALUX(®) (0.8-29.7 ng E2 EEQ/L). Due to the concentrations under limit of quantification, the evaluation of the chemical contribution to estrogenic potency was possible only for E1 and BPA, which contributed less than 10% to the observed effects, except in one sample with a high BPA contribution (17%). The contribution of E2 was significant in two samples where it was detected (28% and 67%). The results demonstrated that more comprehensive information on potential estrogenic activity of wastewater effluents can be achieved by using in vitro biotests in addition to chemical analysis and their use would be beneficial in monitoring and screening purposes.